I recently updated bower via npm i -g bower and it pulled latest version of 1.8.3.
Now running bower i immediately fails with:
module.js:538
throw err;
^
Error: Cannot find module 'q'
FYI: Workaround is explicitly install 1.8.2 via npm i -g bower#1.8.2
Not that this solves the exact problem, but if you look on the Bower package:
This package has been deprecated Author message:
...psst! Your project can stop working at any moment because its
dependencies can change. Prevent this by migrating to Yarn:
https://bower.io/blog/2017/how-to-migrate-away-from-bower/
They recommend you use a package called Yarn
Related
So, I had used sass before using npm install node-sass for my reactjs project. I'm now working on a new project and wanted to use sass again. With the same syntax npm install node-sass to get it installed, I continued to get
./src/components/Main.scss (./node_modules/css-loader??ref--6-oneOf-5-1!./node_modules/postcss-loader/src??postcss!./node_modules/react-scripts/node_modules/sass-loader/lib/loader.js??ref--6-oneOf-5-3!./src/components/Main.scss)
Error: Node Sass version 8.0.0 is incompatible with ^4.0.0.
Or
to import sass files, you first need to install node-sass. run `npm install node-sass` or `yarn add node-sass` inside your workspace
...
...
I followed the instructions to have sass installed from the links npmjs
sass-lang
using these syntaxes
brew install sass/sass/sass
npm install -g sass
but I'm still encountering either errors I mentioned earlier.
I tried deleting the node-module folder, package-lock.json and reinstalled node-modules. That still did not fix the error. Also, I followed how others got around fixing Node Sass version 5.0.0||6.0.0|| 7.0.0 incompatibility issue but that did not fix mine.
I'm seeking help now.
Don't use node-sass anymore
You can easily fix it by the following.
npm uninstall node-sass
npm install sass
This is because node-sass is now deprecated. You will have to install its new version which is sass. Sinc it works all the same and better, this will easily fix the issue without making any additional changes.
And all Works well !
But if you still prefer to use node-sass
You can use the following table to install the appropriate version node-sass for your installed Node.js version which you can check by the command node --version.
npm install node-sass#(your version)
update sass-loader, or remove and install again.
Try this: In your packege.json file, delete "node-sass": "^4.12.0" and replace it with "sass": "". This did it for me.
You can follow these two steps:
Uninstall your node-sass:
npm uninstall node-sass
Install old version node-sass:
npm install --save-dev --unsafe-perm node-sass#4.14.1
It's okay now
The answer for me was to update react-scripts to 4.0.3. I couldn't do the latest version of react-scripts because it still requires a bunch of hacks to make packages work that had polyfilled modules automatically loaded before.
I'm seeing an error when attempting to install the latest cypress on my Windows 10 machine. I was using cypress 8.7 just fine. I deleted node_modules and package-lock.json and removed "cypress": "^8.7.0", from package.json.
Now installing cypress (9.1) I see this error:
npm install --save-dev cypress
npm ERR! Error: Cannot find module 'har-validator'
I see the same error when trying to use the old version too
npm install --save-dev cypress#8.7.0
System info from powershell:
node -v
> v16.8.0
npm -v
> 7.21.0
UPDATE:
My friend is able to install with dependency 8.7.0 in package.json, on OSX with nodejs 14.16.0.
This works today (2021-11-26) for me
npm install --save-dev cypress#8.7.0
There is a Bug in #cypress/request.
Take a look at https://github.com/cypress-io/request/pull/15
EDIT: There is a PR from one of the devs. https://github.com/cypress-io/request/pull/16
Looks like Cypress issue with latest versions. we have this problem for v8.7.0 today. "npm install har-validator" manually installed the missing har-validator module, that helped.
Just to give you some context.
I was running a project and after ng serve I was getting this warning message:
our global Angular CLI version (9.1.4) is greater than your local
version (1.0.0). The local Angular CLI version is used.
I googled and figured out I should update angular cli with the following command.
npm install --save -dev #angular/cli#latest
After that I am getting the following error when trying to build the project:
The build command requires to be run in an Angular project, but a project definition could not be found
Any help will be much appreciated.
After reading some issues reported on the GitHub repository, I found the solution.
In order to update the angular-cli package installed globally in your system, you need to run:
npm uninstall -g angular-cli
npm install -g #angular/cli#latest
Depending on your system, you may need to prefix the above commands with sudo.
Also, most likely you want to also update your local project version, because inside your project directory it will be selected with higher priority than the global one:
rm -rf node_modules
npm uninstall --save-dev angular-cli
npm install --save-dev #angular/cli#latest
npm install
After updating your CLI, you probably want to update your angular version too
Note: if you are updating to Angular CLI 6+ from an older version, you might need to read this
Edit: In addition, if you were still on a 1.x version of the cli, you need to convert your angular-cli.json to angular.json, which you can do with the following command:
ng update #angular/cli --from=1.7.4 --migrate-only
check here for more details.
I am trying to add the mapbox gl package to my Aurealia Typescript skeleton using jspm. I am using the following command.
jspm install npm:mapbox-gl
This is what I am getting.
Looking up npm:mapbox-gl
Updating registry cache...
Downloading npm:mapbox-gl#0.19.1
warn Error on processPackageConfig
Package.json dependency mapbox-gl-shaders set to github:mapbox/mapbox-gl-shaders#e4737bb136d718f9c5fe8d943380f05db6249b57, which is not a valid dependency format for npm.
It's advisable to publish jspm-style packages to GitHub or another registry so conventions are clear.
warn Error processing package config for npm:mapbox-gl.
err Error processing package config for npm:mapbox-gl.
warn Installation changes not saved.
I am using jspm 0.16.36.
When I try to install the package via npm install mapbox-gl it works normally. Any suggestions?
Considering you are using jspm, you might also want to try and reference it through the GitHub repo rather than through npm:
$ jspm install github:mapbox/mapbox-gl-js
It works for me with jspm v16.x and v0.21.0 of MapboxGL.
I'm new to travis- I'm trying to get it to install my npm modules for my project and can't even get past that. "npm install" and "npm test" work fine on my computer (a mac). However, when I push my commits to travis it complains that:
Error: No compatible version found: ini#'^1.2.0'
Valid install targets:
npm ERR! ["1.0.0","1.0.1","1.0.2","1.0.3","1.0.4","1.0.5","1.1.0","1.2.0","1.2.1","1.3.0"]
Note that ini is not something I was originally including in my package.json, but it is depended on by something that I am using. I tried explicitly adding the 1.2.0 version of ini to my package.json but it still complains. I get similar complaints about other upstream dependencies.
Is there something about how travis is doing npm install that greatly differs from my local machine where it is working fine? Really stumped here.
Here's a link to my latest travis failed build: https://travis-ci.org/infomofo/chrome-angular-md-template/builds/35592993
This is due to the NPM version coming with Node.js 0.8. It doesn't support the ^ syntax for declaring dependecies.
You could either use Node.js instead:
node_js: 0.10
Or you could update npm, which would bring support for the dependency version:
before_install: npm update -q