On a 'CALLS' table each call has a call_start, contact_id, operator_id and so on.
I want to count the tot calls for each client on a specific weekday so I extract weekday (extract weekday from call_start) and I get 0 to 6 results.
I used a case to show weekdays (case when (extract(weekday from call_start)=1) then 'monday' and so on.
Now I enter count( client_id) and I get 2 row for 2 calls, 4 rows for 4 calls, rather than 1 row with 2 calls?
Am I missing something silly here?
I am using Firebird 1.5 by the way
u can try something like this
select
sum(case when extract(weekday from cast(call_start as date))=0 then 1 else 0 end) as qty_sun,
sum(case when extract(weekday from cast(call_start as date))=1 then 1 else 0 end) as qty_mon,
sum(case when extract(weekday from cast(call_start as date))=2 then 1 else 0 end) as qty_tue,
....
Related
I am trying to calculate repeat if there is a repeat event in 3,7,30 and >30 days.
In the image below the the yellow is the sql table,
the green is transformation needed, where I find out what is the first event for Event A and Event B. and then find out what is the gap between the first event of A and next events of A.
Finally I need to aggregate and achieve the blue table where data is aggregate for the unique events.
I have been trying to achieve this in SQL but I am stuck as I am not sure how to filter and loop.
Original data and Expected outcome image
DECLARE #reference_date DATE = '2022-08-02';
SELECT
Event,
MIN(Date) as First_date,
SUM(CASE WHEN DATEDIFF(day, #reference_date, Date) BETWEEN 1 AND 2
THEN 1 ELSE 0 END) as "Within_3_Days",
SUM(CASE WHEN DATEDIFF(day, #reference_date, Date) BETWEEN 1 AND 6
THEN 1 ELSE 0 END) as "Within_7_Days",
SUM(CASE WHEN DATEDIFF(day, #reference_date, Date) BETWEEN 1 AND 29
THEN 1 ELSE 0 END) as "Within_30_Days",
SUM(CASE WHEN DATEDIFF(day, #reference_date, Date)>=30
THEN 1 ELSE 0 END) as ">_30_Days"
FROM event e0
GROUP BY Event
output:
Event
First_date
Within_3_Days
Within_7_Days
Within_30_Days
>_30_Days
A
2022-08-01
0
1
2
1
B
2022-09-15
0
0
0
1
The #reference_date is used to reference the date needed to determine if a date is within x days.
DBFIDDLE
P.S. I use dates in the format YYYY-MM-DD, because that's the only way I am SURE about the ordering of the Day and the Month part.
EDIT:
When using the first date of an event to determine the 'within' columns, you can do:
SELECT
e0.Event,
MIN(e0.Date) as First_date,
SUM(CASE WHEN DATEDIFF(day, e1.Date, e0.Date) BETWEEN 1 AND 2
THEN 1 ELSE 0 END) as "Within_3_Days",
SUM(CASE WHEN DATEDIFF(day, e1.Date, e0.Date) BETWEEN 1 AND 6
THEN 1 ELSE 0 END) as "Within_7_Days",
SUM(CASE WHEN DATEDIFF(day, e1.Date, e0.Date) BETWEEN 1 AND 29
THEN 1 ELSE 0 END) as "Within_30_Days",
SUM(CASE WHEN DATEDIFF(day, e1.Date, e0.Date)>=30
THEN 1 ELSE 0 END) as ">_30_Days"
FROM event e0
INNER JOIN (SELECT Event,MIN(Date) as Date from event GROUP BY Event) e1 on e1.Event=e0.Event
GROUP BY e0.Event
see: DBFIDDLE2
I am trying to build a SQL query that would count the sum of sales made based on certain values as shown below:
Given below is how my dataset is:
cust_name,sales_count,day_count
cust_a,100,3
cust_a,200,5
cust_a,150,7
cust_a,120,1
cust_a,180,10
cust_a,100,8
cust_b,20,3
cust_b,10,4
cust_b,50,6
cust_b,60,8
cust_b,15,9
I would like to get the output in the below format
cust_name,sales_count,day_count
cust_a,280,last_14
cust_a,450,last_7
cust_b,85,last_14
cust_b,80,last_7
Given below is the case statement I tried to build
select cust_name,
sum(case when day_count > 7 then count(sales_count) else 0 end) as count_14,
sum(case when day_count < 7 then count(sales_count) else 0 end) as count_7
from sales
group by cust_name;
I am using a Amazon Redshift Database.
Found a similar issue in this link (Amazon Redshift - Get week wise sales count by category) but I keep getting aggregate function calls may not have nested aggregate or window function.
Could anyone help trouble shoot this. Thanks.
From your question, you can try this query.
use SUM and CASE WHEN Expression.
select cust_name,
sum(case when day_count > 7 then sales_count else 0 end) as count_14,
sum(case when day_count < 7 then sales_count else 0 end) as count_7
from sales
group by cust_name;
EDIT:
Becasue Aggregate functions can't nest multiple times.
If you want to fix
sum(case when day_count > 7 then count(sales_count) else 0 end)
You can try to write a subquery to fix it.
SELECT cust_name,
sum(case when day_count > 7 then cnt else 0 end) as count_14,
sum(case when day_count < 7 then cnt else 0 end) as count_7
FROM (
SELECT cust_name,(case when day_count > 7 then 1
when day_count < 7 then 2
else null
end) grp,
count(sales_count) cnt
FROM sales
GROUP BY cust_name,
(case when day_count > 7 then 1
when day_count < 7 then 2
else null
end)
)t
WHERE grp is not null
GROUP BY cust_name
to produce the desired output, what you need is just
sum(case when day_count > 7 then sales_count else 0 end)
what you have in the brackets is the expression which output you redirect to the sum function that aggregates it, so for cust_a it produces the following set of values:
cust_a,100,3 -> 0 (3<=7)
cust_a,200,5 -> 0 (5<=7)
cust_a,150,7 -> 0 (7<=7)
cust_a,120,1 -> 0 (1<=7)
cust_a,180,10 -> 180 (10>7)
cust_a,100,8 -> 100 (8>7)
and then the sum is 280
I have this data called pdays:
id|time|date_time| type_id
1 2 2016-03-05 1
2 5 2016-03-05 1
3 3 2016-03-06 2
4 7 2016-03-07 3
5 2 2016-03-10 1
6 1 2016-03-12 3
I would like to calculate the average number of time SUM(time) for weekdays and weekends grouped by type_id
The output expect like this:
type_id| weekday_time|weekends_time
1 7 2
2 3 0
3 7 1
This is my thoughts:
First I need to extract date number from date_time; Second, identify the date number whether falls into (5,6,12,13,19,20,26,27) which are weekend numbers (note: This data presents a one month case, so I do not need to worry about the changes of weekend date numbers in next month); Finally, do the aggregation and grouping on type_id
CASE WHEN pday.date IN(5,6,12,13,19,20,26,27) THEN 'weekend' ELSE 'weekday' END
This is the case part I think I should use.
First, your output appears to be wrong. Type_id 3 has both a weekend and a weekday entry, but you show one of the output values as 0.
This should get you what you want in SQL Server and it is very close to other RDBMS's. If you update your RBDMS, I'll change:
;with cte AS (
select type_id,
CASE WHEN pday.date IN(5,6,12,13,19,20,26,27) THEN 'weekday' ELSE 'weekend' END AS day_type,
SUM(time) AS time_sum
FROM pdays
GROUP BY
type_id,
CASE WHEN pday.date IN(5,6,12,13,19,20,26,27) THEN 'weekday' ELSE 'weekend' END
)
SELECT type_id,
SUM(CASE WHEN day_type = 'weekday' THEN time_sum ELSE 0 END) AS 'weekday_time',
SUM(CASE WHEN day_type = 'weekend' THEN time_sum ELSE 0 END) AS 'weekend_time'
FROM cte
GROUP BY [type_id]
I got a table of Visitors.
Visitor has the following columns:
Id
StartTime (Date)
Purchased (bool)
Shipped (bool)
For each day within the last 7 days, I want to select 3 counts of the Visitors who have that day as StartTime:
The count of total visitors
The count of total visitors where Purchased = true
The count of total visitors where Shipped = true
Ideally the returned result would be:
Day Total TotalPurchased TotalShipped
1 100 67 42
2 82 61 27
etc...
I am used to .NET Linq so this has proved to be quite a challenge for me.
All I have come up with so far is the following:
SELECT COUNT(*) AS Total
FROM [dbo].[Visitors]
WHERE DAY([StartTime]) = DAY(GETDATE())
It selects the total of the current day just fine, however I feel pretty stuck right now so it'd be nice if someone could point me in the right direction.
For the last 7 days use the query proposed by Stanislav but with this WHERE clause
SELECT DAY([StartTime]) theDay,
COUNT(*) AS Tot,
SUM(CASE WHEN Purchased=true THEN 1 ELSE 0 END) as TotPurch,
SUM(CASE WHEN Shipped=true THEN 1 ELSE 0 END) as TotShip
FROM [dbo].[Visitors]
WHERE [StartTime] BETWEEN GETDATE()-7 AND GETDATE()
GROUP BY DAY([StartTime])
SELECT COUNT(*) AS Total,
SUM(CASE WHEN Purchased=true THEN 1 ELSE 0 END) as TotalPurchased,
SUM(CASE WHEN Shipped=true THEN 1 ELSE 0 END) as TotalShipped
FROM [dbo].[Visitors]
WHERE DAY([StartTime]) = DAY(GETDATE())
and add GROUP BY DAY([StartTime]) as jarlh mentioned
Here's a simple select that will give you the dataset you want
SELECT DATEDIFF(day,StartTime, getdate())+1 as [Day], -- Add 1 to display 1 to 7 instead of 0 to 6
COUNT(*) as Total,
SUM(CASE WHEN Purchased = 1 THEN 1 ELSE 0 END) as TotalPurchased,
SUM(CASE WHEN Shipped = 1 THEN 1 ELSE 0 END) AS TotalShipped
FROM Visitors
WHERE DATEDIFF(day,startTime,GETDATE()) < 6
GROUP BY DATEDIFF(day,startTime,GETDATE())
ORDER BY 1
This query will not take into consideration the time component of the date.
I am trying to group by year but was not able to do.I can get the column count but not year wise. this is what i tried.
select t_contract ,
sum(CASE t_contract when '18' then 1 else 0 end) as XL,
sum(CASE t_contract when '01' then 1 else 0 end) as VC,
sum(CASE t_contract when '75' then 1 else 0 end) as AN,
sum(CASE t_contract when '48' then 1 else 0 end) as CS
from icps.dbo.tickets
WHERE
t_date_time_issued >= DATEADD(year, -6, GETDATE())
GROUP BY contract
.. but i want to add year .. where i have t_date_time _issued column.
My another query is I have a column called t_zone_name and I want to sum all the rows where t_zone_anme like '%ICeland%' an i tried this:
sum(CASE t_zone_name like '%ICeland%' then 1 else 0 end) as ICELAND
but I get an error on statement like... thanks in advance.
LIKE
YEAR XL VC AN CS total
2010 50 50 50 50 200
2011 5 5 5 5 20
Try the below query:
SELECT t_contract, YEAR(t_date_time_issued) As Yr, SUM(CASE WHEN t_zone_name like '%ICeland%' THEN 1 ELSE 0 END) AS ICELAND
SUM(CASE t_contract when '18' then 1 else 0 end) as XL,
SUM(CASE t_contract when '01' then 1 else 0 end) as VC,
SUM(CASE t_contract when '75' then 1 else 0 end) as AN,
SUM(CASE t_contract when '48' then 1 else 0 end) as CS
FROM icps.dbo.tickets
WHERE YEAR(t_date_time_issued) >= (YEAR(GetDate()) - 6)
GROUP BY t_contract, YEAR(t_date_time_issued)
You might need change the order of t_contract and YEAR(t_date_time_issued) depending on which grouping you want to apply first.
As suggested by #ray I have replaced DATEPART(yyyy, t_date_time_issued) >= DATEPART(yyyy, DATEADD(year, -6, GETDATE())) with year(t_date_time_issued) >= (year(GetDate()) - 6)
If you want to group by year, in sql server, you might
GROUP BY DATEDIFF(year,t_date_time_issued, GETDATE())
In other DB engine, usually has method to get year part, or use substring to get year part from a time string.