I'm trying to install Prestashop 1.7 on a server with Ubuntu 16.04 Apache, Mysql, Php 7.0.
I start the installation but after a second i get a generic error "an error has occurred" and i can see under the progress bar, it appears a new prestashop image with another progress bar. On Apache errors log there's nothing. Any ideas what can be wrong? I checked folder's ownership and permissions are ok.
you can see it on http://155.94.210.181/nautazon/
Thanks
The problem was with the zip archive that wasn't uploaded properly on the server. I didn't notice there had been an error on the ftp and the file was incomplete
Related
adonis application returns this error message when cloned the project and run after installing npm install, but the same project is working in another mac book pro. even i am using a mac book pro and it returns the following error. it says error 500.
Error
Cannot initiate session store since unable to parse `3b4204e91221f241deaad16ec6e4ddc0rs82L3YRb0FL72WnRgcJACuQ3Pur5KO5XigYeIuvLtuv+r27yI+dQXmZNbUUqX0URC5bzdBT1lnnZdZutBu4rVBPjvTKX00KR/RRsx9zjF0Zx2lqpSDdwJqUoGvJdM4YnJA3D6EK71GRVfpAeEprchMf5E0hdVEgnzVxV0wgqOg=`
The issue was really unknown and once i clean cookies from site settings of the browser, it was fixed itself, also i recommend to test all the sites on Incognito mode,
I did something stupid and while in the middle of a valet use 7.1 process, I pressed ctrl-C. In an attempt to get everything working since then I uninstalled valet+, did a composer global update, a brew update, valet fix, and valet install yet still every site I visit just spits out "Fatal error: Call to undefined function apcu_fetch() in /Users/n8klatt/.composer/vendor/weprovide/valet-plus/server.php on line 37". Any ideas on how I can get Valet+ working again?
(The initial error after interrupting the valet use 7.1 call was "Unable to determine linked PHP", which I remedied with a brew link --force php#5.6 since 5.6 was what I had been using. That allowed me to proceed with the valet use 7.1 but then all my sites started throwing that apcu_fetch error.)
So you're experiencing 2 problems here:
Call to undefined function apcu_fetch() is most likely caused by having PHP-FPM run your webserver on a different PHP version as your CLI. Makes sure your webserver is running the same version as your CLI. An easy was to check this is adding the PHPINFO within the server.php file and check the result. Often restarting your PC allows old PHP-FPM instances to die.
Unable to determine linked PHP is an error thrown when you're running on a native PHP version which is not installed by brew. In this case valet-plus cannot find the correct version number of your PHP installation and throws this error.
Solutions:
Make sure APCu is installed correctly as mentioned in weprovide/valet-plus#133
Make sure your PHP installation is not faulty as mentioned in weprovide/valet-plus#127
Hope that helps, if not give me a comment.
I had the same problem with php56. But I'm not using valet, after I reinstall the PHP56 with brew, and it added pear and pecl module. I installed apcu (couldn't install apc directly) with pecl channel-update pecl.php.net and pecl install apcu-4.0.11.
After that installation added extension="apcu.so" in php56 .ini file, which points to /usr/local/Cellar/php#5.6/5.6.38/lib/php/20131226/apcu.so where the image does not exist really because it was installed by PECL, so I had to change php56 .ini to apcu extension to match extension=/usr/local/lib/php/pecl/20131226/apcu.so where the image file resides for real, and then restart apache and it works.
I migrated prestashop 1.4 (all the files) from the live site, to my computer and imported the database successfully to htdocs/prestashop
Now I go to http://localhost/prestashop/ and it shows nothing but this
"This page isn’t working
localhost is currently unable to handle this request. HTTP ERROR 500"
You are trying to run PS 1.4 on php7.
mysql_connect was deprecated in php5.5 and completely removed in php7.
http://php.net/manual/en/function.mysql-connect.php
i have installed apache tomcat 8.5 one month ago with java 1.8 on Windows Server 2008 and it works ok.
now the service is stopped and i'm not able to restart it from apache configuration or Windows Services . It is always stopped.
i got the following error: "service terminated with service specific error incorrect function".
ther error in Windows Event viewer does not saying nothing more:
even its details tab:
What can i do?
I was trying to install Apache Tomcat/8.5.31 as Windows service and i was also facing the same error.
For me what finally worked was following these steps. Go to Tomcat installation directory's bin folder. You will see two EXEs (tomcat8.exe and tomcat8w.exe). tomcat8w.exe is a GUI application for monitoring and configuring Tomcat services. Double-click it and then go to Java tab
1) Enable the check box for Use default
2) In Java Classpath: section, specify the path to bootstrap.jar and tomcat-juli.jar. These should be present in your tomcat installation's bin directory itself:
<path_to_tomcat_installation>\bin\bootstrap.jar;<path_to_tomcat_installation>\bin\tomcat-juli.jar
To get more help, you may check the log at the following location provided you installed your Tomcat as Windows service using default LogPath option as described in the documentation: %SystemRoot%\System32\LogFiles\Apache
UPDATE: In another recent installation, i noticed that despite having configuration settings exactly similar to another working setup, i was still getting Incorrect function error under System log in Event Viewer. This time, i had to uncheck the Use default option and had to explicitly provide path to jvm.dll as shown below:
Java Classpath setting was still required as explained above.
Currently I have a Windows Server 2012 R2 Datacenter running Tomcat 9 & had the same problem. This happened after I ran Windows updates & restarted the Server.
Error messages below. (The blanked out text is my private data.)
Error showed when attempting to start the service.
Error in System Event Log
The following steps fixed the issue...
Navigate to your tomcat9w.exe Location: \Tomcat9\bin\
Right click your tomcat9w.exe and select Run as administrator.
Select the Java tab. Select Use default, Apply, & OK
Start your service.
Note: I unchecked the "Use default" box after I was able to get the service running correctly. Because I wanted to retain my existing configuration. Going forward the service has continued to work correctly.
Hope this helps!
I was also facing some issue with Tomcat 9 and Java 13 (tried all previously mentioned solutions but nothing worked). When I downgraded it to Java 11 and Pointed the jvm.dll from JDK 11 my issue got fixed (or Use Default if JAVA_HOME is set to Java 11).
In my case the only way I could get it to work, was to go to the "Startup" tab and change "Mode" from "JVM" to "Java". After that, it started fine and was able to confirm that by visiting the localhost.
(Definitely not an expert)
I fixed this issue by (re)installing Java. I was using the Java SDK downloaded by IntelliJ. Although I was able to direct Tomcat to that download during installation, it returned this "error service terminated" message at runtime. Instead I installed Java SDK directly from Oracle, Tomcat found the installation immediately during installation (I didn't need to point it), and this error disappeared.
It's possible the Java installation by IntelliJ was incomplete somehow and is the underlying cause of the problem, but I am definitely not an expert.
I fixed the issue by reinstalling Tomcat:
Search the Command Prompt icon
Right-click on it
Select Run as administrator
Change the folder to the bin folder of Tomcat
Execute appserver uninstall
Execute appserver install
It solved my problem.
I followed the below steps to fix the the above issue. it may help if someone still face the same.
Step 1. opened the installation directory : tomcat9w.exe Location: \Tomcat9\bin\
Step 2. Browsed the Jvm.dll path under "Java Tab" in Tomcat where it has installed
Step 3. Run the service but still faced same.
Step 4. then, Opened ""C:\Program Files (x86)\Apache Software Foundation\Tomcat 9.0\bin>startup.bat --> entered.
Finally it got fixed .
I've upgraded to the current version of macOS. I want to work with Apache. Well, my problem is, that when I try to access localhost with or without ~Username, I get an error message saying ERR_CONNECTION_REFUSED on Chrome or "Can't open Page" on Safari. Apache is running and apachectl configtest says "Syntax OK".
I placed the current version of phpMyAdmin into /Library/WebServer/Documents and tried to access it, same problem.
I followed the steps in this guide without a solution for me
Apache localhost/~username/ not working
So does anyone know what problem I'm facing? I'm clueless right now.
I had the same outcomes as above, using virtual hosts though, and after updating to macos 10.12.2 was receiving ERR_CONNECTION_REFUSED.
My original setup is based on the excellent posts here: https://getgrav.org/blog/macos-sierra-apache-mysql-vhost-apc
And as such, because I'm using Homebrew, all I needed to do was also run brew upgrade on CLI followed by sudo apachectl restart and I'm back up and running.