I use VirtualBox 5.2.6 on Windows 10. There is an Ubuntu virtual machine, from which I would like to access to host's clipboard and files.
I tried to use
Machine>Settings >> General>Advanced>Shared Clipboard
I also tried
Devices>Shared Clipboard>Bidirectional
I installed virtualbox-guest-dkms too, but has no effect.
You need first to install guest addition in your VM, you may take a look here if you need help.
I've been fighting with this issue. There's a lot of writting about this, some solutions work for some causes and others do the fix for others.
I just want to share how I fixed this at all. Hoping this will help at least for some cases.
First of all, update your guest Ubuntu SO.
$ sudo apt update
$ sudo apt upgrade
Then, install guest addition as #A STEFANI stated.
This will install the program VBoxClient-all in the guest machine.
After this, just kill the proccess VBoxClient and start it using VBoxClient-all.
$ sudo killall VBoxClient
$ VBoxClient-all
No reboot is needed.
Hope this helps.
Related
Having a terrible time with the raspi related problems. One of them concerning the libcamera. I have Ubuntu 22.04 64bit on my raspi and I have installed the libcamera package with the command sudo apt install libcamera_*. The problem is that whenever I run a command with libcamera it tells me command not found!!! Any solutions?!! The camera is detected and supported. Thanks in advance for your help.
I am trying to install MSSQL-Server on my Ubuntu 22.04. I know that it does not currently support Ubuntu 22.04. I need to find a workaround to install the software as I don't want to downgrade.
I tried installing but it keeps giving me dependency errors. How do I solve it? Any help would be appreciated.
Unfortunately, at this time, SQL Server 2019 only works on Ubuntu 20/21. 22.04 is not supported at this time.
So either you will have to use Ubuntu 20 or, as others have stated, use Docker Containers.
You can install Docker into Ubuntu 22.04. It's a multi-step process, but it isn't that difficult.
Install Docker Engine on Ubuntu (follow the Install using the repository section)
https://docs.docker.com/engine/install/ubuntu/#set-up-the-repository
Install SQL Server Container
https://learn.microsoft.com/en-us/sql/linux/quickstart-install-connect-docker?view=sql-server-ver15&pivots=cs1-bash
That should do it.
Also, in link #2, read further below on how to connect to your docker image to run SQLCMD from within the container.
Like SQL Server 2019, you cannot install the SQLCMD tools directly into your Ubuntu 22.04 installation. But the Docker container image contains the sqlcmd tool for you to be able to connect to the database.
Or, you can use Visual Studio Code with the SQL Server (mssql) extension and it can connect to your SQL Server instance in your running Docker container.
The connection string would be:
"Server=localhost;Database=your database name;User Id=user id;Password=password"
You can leave out the Database setting if you just want to connect to the default database.
If you create any databases, you can then connect to them directly by specifying the name.
I also have same problem like this. I also tried downgrading Openssl to 1.1.1k and 1.1.1s but still not works. And finally I found this explanation
https://github.com/microsoft/msphpsql/issues/1419#issuecomment-1303626500
So, keep use OpenSSL 3.0.2 and you just need to change the SECLEVEL to 0 instead of 1 in /etc/ssl/openssl.conf
[system_default_sect]
CipherString = DEFAULT:#SECLEVEL=0
And it works, now I can connect to SQL Server using Ubuntu 22.04.
Looked at this
and it has worked for me!
So worth giving it a shot
cd /opt/mssql/lib
ls -la
sudo rm libcrypto.so libssl.so
sudo ln -s /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 libcrypto.so
sudo ln -s /usr/lib/x86_64-linux-gnu/libssl.so.1.1 libssl.1.1
If libssl is not installed, try:
sudo apt install libssl1.1
Update: I had issues connecting using libssl1.1, so I switched to 1.0 after performing the previous steps, so I also did the following:
sudo systemctl stop mssql-server
sudo systemctl edit mssql-server
Added:
[Service]
Environment="LD_LIBRARY_PATH=/opt/mssql/lib"
Then:
sudo ln -s /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0 /opt/mssql/lib/libssl.so
sudo ln -s /usr/lib/x86_64-linux-gnu/libcrypto.so.1.0.0 /opt/mssql/lib/libcrypto.so
Then started mysql-server and things just worked fine!
It's my first time trying to install and using Arch linux, I was trying to install it in VirtualBox in Mac Os mojave, when i did arch-chroot /mnt(after all the configuration), then tried to nano /etc/locale.conf it just printed command not found.
I've already tried with vim or other commands like sudo or apt to install a plain text editor but it's always the same and I also tried twice but nothing changes.
PLEEAAASE, I need help.
In Archlinux you should use pacman -S to install packages
try this :
"pacman -S nano"
you can see more information here:
https://wiki.archlinux.org/index.php/pacman#Installing_packages
You can install it with the Linux kernel etc.
For installing the kernel you use
pacstrap
so just add nano, vim or whatever text-editor you like to use.
For more information: https://wiki.archlinux.org/index.php/Installation_guide
https://prnt.sc/hlt4ey
I'm trying to get onto the xfce4 client from my chromebook (and it has worked before), however now this error is popping up. How do I fix this error?
My guess is you may not have the right user privileges. According to the error message you provided you are running an Ubuntu Linux environment.
If you haven't tried running the program through the terminal yet, attempt to do so.
The terminal can typically be opened by the key combination Ctrl+Alt+T on ubuntu linux.
Try using sudo command before running the program. This will run the command you enter using root privileges.
For example, if running the program on your terminal is
myName#ubuntu: xfce4
And this encounters an error, try to use sudo beforehand like so:
myName#ubuntu: sudo xfce4
Alternatively you can log in and not have to type sudo before every command.
myName#ubuntu: sudo bash
password:
If this fails you may need to update the package that contains the library. This can be done on the terminal in a fashion similar to:
myName#ubuntu: sudo apt-get install --only-upgrade xfce4
I'm trying to connect to SQL Server on Ubuntu 9.04 using Ruby. I translated and followed all the steps outlined in getting OSX talking to SQL Server from here:
http://toolmantim.com/articles/getting_rails_talking_to_sqlserver_on_osx_via_odbc
Everything is working on the FreeTDS and unixODBC end. I can see and query the database using tsql.
When I try to access the database from Ruby using IRB I get the following error:
DBI::DatabaseError : INTERN (0) [RubyODBC] Cannot allocate SQLHENV
Has anyone run into this and what can I do to solve this?
I started getting this error when I upgraded to Ubuntu 9.10 (Karmic Koala). Your tip regarding installation order of the Ubuntu packages didn't work for me.
It seems the fix was to manually compile ruby-odbc.
wget http://www.ch-werner.de/rubyodbc/ruby-odbc-0.9997.tar.gz
tar xzvf ruby-odbc-0.9997.tar.gz
cd ruby-odbc-0.9997
ruby extconf.rb --with-dlopen
make
sudo make install
System
Ubuntu 9.10 64 bit
I had to specify the odbc directory in the rubyodbc install
wget http://www.ch-werner.de/rubyodbc/ruby-odbc-0.9997.tar.gz
tar xzvf ruby-odbc-0.9997.tar.gz
cd ruby-odbc-0.9997
ruby extconf.rb --with-odbc-dir=/usr/lib/odbc --disable-dlopen
make
sudo make install
I had the same problem.
But on Centos 5.5 not Ubuntu
Tried many forums/solutions with no joy.
The error message hints at a missing reference to unixODBC.
Which was setting using LD_LIBRARY_PATH variable.
Found another way to set path, by creating
/etc/ld.so.conf.d/odbc.conf.
add unixODBC location to file ie /usr/local/lib.
Run, sudo ldconfig.
Go fig that I actually got this working after submitting my question. What I ended up doing was uninstall libdbd-odbc-ruby and libdbi-ruby and then reinstalling them by installing libdbi-ruby first and then installing libdbd-odbc-ruby. I guess when I installed them before, something must of messed up.
BTW, following the instructions to recompile Ruby-ODBC on Ubuntu 9.10 (Karmic) required installation of either the libiodbc2-dev or the unixodbc-dev package. When using libiodbc2-dev, I got segmentation faults when my Ruby program tried:
connection.select_all('select top 15 * from log_device_healths')
..but no problem when using unixodbc-dev instead.
Tim Morgan's solution didn't work for me. However I was able to get things working by installing an older version of libodbc-ruby (0.9995) from here:
http://mirrors.kernel.org/ubuntu/pool/universe/libo/libodbc-ruby/libodbc-ruby1.8_0.9995-1_i386.deb
Additional details are available from Carsten Gehling's blog:
http://gehling.dk/2010/02/the-woes-of-libodbc-ruby1-8-and-debian-ubuntu/
Be careful though -- Ubuntu's Update Manager will happily "upgrade" this version of libodbc-ruby to the broken 0.9997-2. I accidentally overwrote the older version this way only to end up back here, trying to figure out how I fixed it last time.
Well, it seems my other answer stopped working for me. This thread helped me to solve the issue in another way, and I wanted to share it here.
sudo gem uninstall ruby-odbc
sudo rm /usr/local/lib/site_ruby/1.8/x86_64-linux/odbc.so
cd /tmp
wget http://mirrors.kernel.org/ubuntu/pool/universe/libo/libodbc-ruby/libodbc-ruby1.8_0.9995-1_amd64.deb
sudo dpkg -i libodbc-ruby1.8_0.9995-1_amd64.deb
If you're not on a 64-bit platform, you'll need to download a different Debian package.
Basically, what solves the problem is installing version 0.9995 of the ruby-odbc Ubuntu package.