I am attempting to create a search inside of a multiline textbox that will find each instance of a value and highlight that value inside the textbox. It will need to work regardless of how many instances exist on a given line. So far I have used the following code to identify if a value exists on a line but cannot get the highlighting to work properly when there are multiple instances of the same value.
strVal = "Find Me"
arrLines =Split(myTextbox.value, vbCrLf)
For Each strLine In arrLines
If InStr(strVal, myTextbox.text) > 0 Then
myTextbox.SelStart = InStr(strVal, my textbox.value)
myTextbox.SelLength = Len(strVal)
Exit For
End if
Next
I want to have this macro linked to a button and have the macro find and highlight the next instance each time the button is clicked regardless if that instance is on the same line or a new line. Basically, a Ctrl+F feature for the textbox. Thanks!
You can give this code a try (see comments for explanations):
Option Explicit
Private Sub CommandButton1_Click()
Static lastInstancePosition As Long ' use Static variable to have its value persist after Sub exiting
Dim instancePosition As Long
strVal = "Find me"
With myTextbox
instancePosition = InStr(lastInstancePosition + 1, .Text, strVal) 'search string occurrence starting from last found item
If instancePosition > 0 Then
.SetFocus 'bring focus back ti the textbox after it has been taken by the button
.SelStart = instancePosition - 1
.SelLength = Len(strVal)
lastInstancePosition = instancePosition ' update starting position for next search
End If
End With
End Sub
Related
I have a form in MS Access with multiple checkboxes which I want to use to fill up one textbox. If one of the checkboxes gets unchecked, I want its value to be deleted from the textbox without deleting other values. I'm new at using Access and coding in VBA (been reading ebooks for the past 3 weeks) and although I've tried to do research online it's been difficult for me to find the right code.
This is what I have so far:
First code found
Private Sub cb_click()
If Me.cb1 = True Then
Me.txtComentarios.Value = "INACTIVO;"
Else
Me.txtComentarios.Value = Null
End If
End Sub
Second code found
Private Sub cb2_Click()
If Me.cb2 = -1 Then
Me.[txtComentarios] = [txtComentarios] & "DISCREPANCIA"
Else
Me.[txtComentarios] = ""
End If
Exit Sub
End Sub
Also I would like for the checkboxes to fill the textbox in the same order the chechboxes are displayed.
Ex.
cb1; cb2; cb3
If, cb2 gets unchecked and its value gets deleted, I should have "cb1; cb3" but if I re-check cb2 I should get "cb1; cb2; cb3" again.
I just hope someone could guide me in. Thank you in advance.
Luz
You don't need events for each checkbox. Just create one procedure, which creates full text depending on checkboxes state and puts this text to the textbox. To call this function after each click on checkbox set After Update property of all checkboxes to =MyFunctionToUpdateTextbox instead of [Event Procedure]
Private Function MyFunctionToUpdateTextbox()
Dim strText As String
If Me.cb1 = True Then
strText = strText & "INACTIVO;"
End If
If Me.cb2 = True Then
strText = strText & "DISCREPANCIA;"
End If
If Me.cb3 = True Then
strText = strText & "Text for cb3"
End If
Me.txtComentarios = strText
End Function
I am having an userform where I have 8 Checkboxes in it.
Each checkbox is assigned to an call function called autofilter.
I would like to have an vba,in such a way that more than one Checkbox is used, then it should Display the result of selected Checkbox.
How can I achieve in VBA. I am struck how i should proceed with this Problem.
Expecting an help from Forum.
This is my autofilter program
Sub autofilter()
Dim ws As Worksheet
Set ws = ThisWorkbook.Sheets("Result")
wslr = ws.Cells(Rows.Count, 1).End(xlUp).Row
Set myfilt = ws.Range("A1:AFU" & wslr)
myfilt.autofilter Field:=12, Criteria1:= _
"USA"
End Sub
similarly, i have them for other Locations as well till autofilter7.
Right now, i have the code working in such a way that, if check box 1 is true it calls autofilter1.
I would like to have a VBA, in such a way that, when i select 1 or more checkboxes, it should call their autofilter function together. How can i achieve this ?
[![I have userform with Checkboxes designed like this.in the command button i have the following code,
If CheckBox1.Value = True Then
Call autofilter
End If
similarly, I have it same for other checkboxes.
]1]1
Difficult to answer without all the exact details, but I think you are looking for something like:
In the command button _Click sub code, you should have this:
Edited : notice Dim i as String at the top.
Dim formControl As Control
Dim i As String
'loop through every control in the userform
For Each formControl In Me.Controls
'Test if the control is a checkbox
If LCase(TypeName(formControl)) = "checkbox" Then
If formControl.Value = True Then
'The below is very crude and you should find a better way of getting parameter from checkbox
'The below also assumes you use ONE filterFunction that takes a parameter
'You need to get the number from the checkbox, so take the number from the name of the checkbox
i = Right(formControl.Name, 1) - 1
'myFilterFunction i (Use this only if you have parameterised your function)
'change i to empty string if it was 0.
i = IIf(i = 0, "", i)
'This calls a function represented by the string
Application.Run "myFilterFunction" & i
End If
End If
Next formControl
At the moment, the away you've describe it, the code should work. Replace the name of the function with the name of your autofilter function....
I am using Ms-Access and I created a userform which has a number of Textboxes on it. The boxes are named: Box1, Box2, Box3 ...
I need to loop through all boxes, but I don't know which is the last one. To avoid looping through all userform controls I thought of trying the following:
For i =1 To 20
If Me.Controls("Box" & i).value = MyCondition Then
'do stuff
End If
Next i
This errors at Box6, which is the first box not found. Is there a way to capture this error and exit the loop when it happens.
I know I could use On Error but I 'd rather capture this specific instance with code instead.
Thanks,
George
A Controls collection is a simplified collection of controls (obviously) and share a same order as a placement order of controls.
First of all, even a creatable collection object lacks methods such as Exists or Contains , hence you need a function with error handling to checking/pulling widget from a collection.
Public Function ExistsWidget(ByVal Name As String) As Boolean
On Error Resume Next
ExistsWidget = Not Me.Controls(Name) Is Nothing
On Error GoTo 0
End Function
If you really doesnt like "ask forgiveness not permission" option you can pull entire ordered collection of your textboxes (and/or check existance by name in another loop with similar logic).
Public Function PullBoxes() As Collection
Dim Control As MSForms.Control
Set PullBoxes = New Collection
For Each Control In Me.Controls
If TypeOf Control Is MSForms.TextBox And _
Left(Control.Name, 3) = "Box" Then
Call PullBoxes.Add(Control)
End If
Next
End Function
Since names of widgets are unique - you can return a Dictionary from that function with (Control.Name, Control) pairs inside and able to check existance of widget by name properly w/o an error suppression.
There's a good guide to Dictionary if it's a new information for you.
Anyway, no matter what object you choose, if user (or code) is unable to create more of thoose textboxes - you can convert this Function above to a Static Property Get or just to a Property Get with Static collection inside, so you iterate over all controls only once (e.g. on UserForm_Initialize event)!
Public Property Get Boxes() As Collection
Static PreservedBoxes As Collection
'There's no loop, but call to PullBoxes to reduce duplicate code in answer
If PreservedBoxes Is Nothing Then _
Set PreservedBoxes = PullBoxes
Set Boxes = PreservedBoxes
End Property
After all, the last created TextBox with name Box* will be:
Public Function LastCreatedBox() As MSForms.TextBox
Dim Boxes As Collection
Set Boxes = PullBoxes
With Boxes
If .Count <> 0 Then _
Set LastCreatedBox = Boxes(.Count)
End With
End Function
I think that now things are clearer to you! Cheers!
Note: All code are definitely a bunch of methods/properties of your form, hence all stuff should be placed inside of form module.
Long story short - you cannot do what you want with VBA.
However, there is a good way to go around it - make a boolean formula, that checks whether the object exists, using the On Error. Thus, your code will not be spoiled with it.
Function ControlExists(ControlName As String, FormCheck As Form) As Boolean
Dim strTest As String
On Error Resume Next
strTest = FormCheck(ControlName).Name
ControlExists = (Err.Number = 0)
End Function
Taken from here:http://www.tek-tips.com/viewthread.cfm?qid=1029435
To see the whole code working, check it like this:
Option Explicit
Sub TestMe()
Dim i As Long
For i = 1 To 20
If fnBlnExists("Label" & i, UserForm1) Then
Debug.Print UserForm1.Controls(CStr("Label" & i)).Name & " EXISTS"
Else
Debug.Print "Does Not exist!"
End If
Next i
End Sub
Public Function fnBlnExists(ControlName As String, ByRef FormCheck As UserForm) As Boolean
Dim strTest As String
On Error Resume Next
strTest = FormCheck(ControlName).Name
fnBlnExists = (Err.Number = 0)
End Function
I would suggest testing the existence in another procedure per below: -
Private Sub Command1_Click()
Dim i As Long
i = 1
Do Until Not BoxExists(i)
If Me.Conrtols("Box" & i).Value = MyCondition Then
'Do stuff
End If
i = i + 1
Next
End Sub
Private Function BoxExists(ByVal LngID As Long) As Boolean
Dim Ctrl As Control
On Error GoTo ErrorHandle
Set Ctrl = Me.Controls("BoX" & LngID)
Set Ctrl = Nothing
BoxExists = True
Exit Function
ErrorHandle:
Err.Clear
End Function
In the above, BoxExists only returns true if the box does exists.
You have taken an incorrect approach here.
If you want to limit the loop, you can loop only in the section your controls reside e.g. Detail. You can use the ControlType property to limit controls to TextBox.
Dim ctl As Control
For Each ctl In Me.Detail.Controls
If ctl.ControlType = acTextBox Then
If ctl.Value = MyCondition Then
'do stuff
End If
End If
Next ctl
I believe the loop will be faster than checking if the control name exists through a helper function and an On Error Resume Next.
But this only a personal opinion.
I'm making an add records form for a spreadsheet of mine, and let's say that I want one of the controls to be a dropdown that is populated by unique entries under a certain column "type". However, I want to also make it such that the dropbox always has a initial option to "add new type" and upon such selection, it becomes a regular text box. How would I do this in VBA?
You cannot change a control type at run time. The easiest thing to do is create a combo box and a text box. Set the text box visibility to false. Then in the onchange event of the combo box your code will unhide the text box and hide the combo box. You will also need a save button so that when it is clicked it will add the option to the drop down, clear the text box, hide the text box, hide the button and unhide the drop down.
Okay, so here's my idea of how to tackle this.
Create 2 hidden elements (Visibility = False), one a TextBox and one a CommandButton.
Populate your ComboBox with the values from the sheet under column "type"
Add one more entry AddItem with wording such as "Add new item..."
When the user selects "Add new item...", change the Visibility of the TextBox & CommandButtons to True
When the user clicks the CommandButton, add the phrase to the column and add a new element to the ComboBox
I have created a mockup UserForm and code that does a little more than just this; it also styles the user entry to sentence case (consistency purposes) and checks to make sure the value isn't already in the column.
Excel Sheet with "type" column
UserForm with name labels
UserForm Code
Private Sub bAdd_Click()
Dim str As String
Dim rng As Range
Dim ro As Integer
'Makes sure there is an entry, adds it to the Sheet and then updates the dropdown
If Len(Me.tbNew) > 0 Then
'Converts user entry to "Sentance Case" for better readability
str = StrConv(Me.tbNew, vbProperCase)
'Finds out if the entry already exists
Set rng = Sheets(1).Range(Sheets(1).Cells(2, 1), Sheets(1).Cells(Sheets(1).Cells(Sheets(1).Rows.Count, 1).End(xlUp).Row, 1))
On Error Resume Next
Err.Number = 0
'Searches for duplicate; if found, then ListIndex of cbColor is modified without inserting new value (prevents duplicates)
ro = rng.Find(str, LookIn:=xlValues, LookAt:=xlWhole).Row
Debug.Print Err.Number
'Ensures a user doesn't add the same value twice
If Err.Number > 0 Then
Sheets(1).Cells(Sheets(1).Cells(Sheets(1).Rows.Count, 1).End(xlUp).Row + 1, 1) = str
Me.cbColor.AddItem StrConv(Me.tbNew, vbProperCase), Me.cbColor.ListCount - 1
Me.cbColor.ListIndex = Me.cbColor.ListCount - 2
Else
Me.cbColor.ListIndex = ro - 2
End If
'Resets and hides user form entries
Me.tbNew = vbNullString
Me.tbNew.Visible = False
Me.bAdd.Visible = False
End If
End Sub
Private Sub bClose_Click()
Unload Me
End Sub
Private Sub cbColor_Change()
'Visibility is toggled based on if the user selected the last element in the dropdown
Me.bAdd.Visible = Me.cbColor.ListIndex = Me.cbColor.ListCount - 1
Me.tbNew.Visible = Me.cbColor.ListIndex = Me.cbColor.ListCount - 1
End Sub
Private Sub UserForm_Initialize()
'Populate from the sheet
For a = 2 To Sheets(1).Cells(Cells(Sheets(1).Rows.Count, 1).End(xlUp).Row, 1).Row
Me.cbColor.AddItem Sheets(1).Cells(a, 1)
Next
'Add option for new type
Me.cbColor.AddItem "Add new type..."
End Sub
Probably a silly question with a simple answer but I am a real novice when it comes to userforms.
I have "Frame 3" with 5 different option buttons (Dest1, Dest2, Dest3, Dest4, Dest5) After an option is selected, where is the caption value of the selected option stored? How can I access that with vba.
Thank you,
Josh
Here's just some example code you can use. Add your Option Buttons to groups, and then you can go from there. I used groups since you had multiple frames, and you can check based on group, and have multiple groups, and check which one's selected for each group.
Private Sub CommandButton1_Click()
Dim x As Control
' Loop through ALL the controls on the UserForm.
For Each x In Me.Controls
' Check to see if "Option" is in the Name of each control.
If InStr(x.Name, "Option") Then
' Check Group name.
If x.GroupName = "Grp1" Then
' Check the status of the OptionButton.
If x.Value = True Then
MsgBox x.Caption
Exit For
End If
End If
End If
Next
End Sub
You can also access the option buttons through the frame-ojbect that holds them (if you have other frames and controls you don't want to go through):
Option Explicit
Sub Test()
Dim oCtrl As Control
'***** Try only controls in Frame3
For Each oCtrl In Frame3.Controls
'***** Try only option buttons
If TypeName(oCtrl) = "OptionButton" Then
'***** Which one is checked?
If oCtrl.Value = True Then
'***** What's the caption?
Debug.Print "You have checked option " & oCtrl.Caption
Exit For
End If
End If
Next
End Sub
The Label Text associated with an Option Button is obtainable by using OptionButton1.Caption
If you are using a loop, just substitute the OptionButton1 with your variable for option buttons and it will pull through the one you need when conditions are met. eg:
For xitem = 1 To 5
xFrm = "OptionButton" & xitem
For Each fItem In Me.Controls
If fItem.Name Like xFrm Then
If fItem.Value Then
k = fitem.Caption
End If
End If
Next fItem
Next xitem
In my case, I wanted the caption of the toggle that was selected in an option group to be passed on to a subform filter. e.g. choosing toggle "black" filters subform to all cars where strColour = "black".
I ended up with this:
Private Sub OptionGroupName_Click()
Dim Caption As String
Caption = OptionGroupName.Controls.Item(OptionGroupName.Value - 1).Caption
Me.SubformName.Form.Filter = "[SubformField] = """ & Caption & """"
Me.SubformName.Form.FilterOn = True
End Sub
Not to dog pile on everyone else's options but I created a function that takes the radio group name and spits out the selected radios coresponding label caption. Was using it in Access not Excel.
Only works provided you name your controls similarly....
i.e. (lblRadioButton1 & optRadioButton1)
Function GetSelectedRadioButtonCaption(ByVal optionGroupName As OptionGroup) As String
Dim oCtrl As Control
Dim oCtrl2 As Control
Dim optionLabelName As String
Dim optionLabelObject As Label
Dim optionButtonObject As OptionButton
For Each oCtrl In optionGroupName.Controls
'***** Try only option buttons
If TypeOf oCtrl Is OptionButton Then
'***** Which one is checked?
Set optionButtonObject = oCtrl
If optionButtonObject.OptionValue = optionGroupName.Value Then
'***** What's the caption?
optionLabelName = Replace(oCtrl.Name, "opt", "lbl")
For Each oCtrl2 In optionGroupName.Controls
If oCtrl2.Name = optionLabelName Then
Set optionLabelObject = oCtrl2
GetSelectedRadioButtonCaption = optionLabelObject.caption
Exit For
End If
Next
End If
If GetSelectedRadioButtonCaption <> "" Then
Exit For
End If
End If
Next
Exit_GetSelectedRadioButtonCaption:
End Function