I'm working on the project where university course is represented as a to-do list, where:
course owner (teacher of the course) can add tasks (containing the URL to the resource needs to be learned and two datetime fields - when to start and when to complete the task)
course subscriber (student) can mark tasks as complete or not complete and their marks are saved individually for each account.
If student marks task as complete - his account + element he marked are shown in the course activity tab for teacher where he can:
initiate a conversation in JavaScript-based chat with him
evaluate the result of the conversation
What optimization algorithm you could recommend me to use for timetable rescheduling (changing datetime fields for to-do element if student procrastinates) here?
Actually, we can use the student activity on the resource + fact that he marked the task as complete + if he clicked or not on the URL placed on the to-do element leading to the external learning material (for example Google Book).
For example, are genetic algorithms suitable for this model and what pitfalls do they have: https://medium.com/#vijinimallawaarachchi/time-table-scheduling-2207ca593b4d ?
I'm not sure I completely understand your problem but it sounds like you have a feasible timetable to begin with and you just need to improve it.
If so genetic algorithms will work very well, but I think representing everything as binary 'chromosomes' like in the link might not be practical.
There are many other ways you can represent a timetable, such as in a 2D array, or giving an event a slot number.
You could look into algorithms such as Tabu search, Simulated Annealing and Great Deluge and Hill Climbing. They are all based on similar ideas but some work better with some problems than others. For example if you have a very rough search space simulated annealing won't be the best and Hill Climbing usually only finds a local optimum.
The general architecture of the algorithms mentioned above and many other genetic algorithms and Metaheuristics is: select a neighbouring solution using a move operator (e.g. swapping the time of one or two or three events or swapping the rooms of two events etc...), check the move doesn't violate any hard constraints, use an acceptance strategy such as, simulated annealing or Great Deluge, to determine if the move is accepted. If it is keep the solution and repeat the steps until the termination criterion is met. This can be max time, number of iterations reached or improving move hasn't been found in x number of iterations.
Whilst this is running keep a log of the 'best' solution so when the algorithm is terminated you have the best solution found. You can determine what is considered 'best' based on how many soft constraints the timetable violates
Hope this helps!
I'm doing a research on the author name disambiguation problem. I want to make some experiments. I want to perform clustering on citation records. My dataset consist of 2000 xml records. I need testing data. The dataset that I'm using is not popular and I need to make testing data manually. I don't know how to do so. I need instruction of how to make testing data manually. Note: I want to compare the performance of a set of techniques in solving the author name disambiguation problem, So I must perform testing.
Even though it is not really clear what kind of testing you want to perform, but general answer to the issue at hand - trying to artificially create more data from the data you have at hand - is a bootstrap. In general it is technique when you perform sampling with replacement from your dataset as many times as you want. It randomly picks up some element from your data repetitively untill you get a sample of the size you want. The sample you get could be larger than your original dataset but should have similar (from statistical point of view) as your original dataset. Bootstrap sampling is available in sklearn.
P.S. You need to keep in mind that this solution is not optimal - best solution to this problem is to actually get more real data somehow.
Classification vs. Clustering
For author name disambiguation, I don't think you want clustering. What you want is classification.
You have a features for each author / publication. Now you give the classifier two of those feature vectors. It classifies "it is the same author" or "those are different authors".
Training / testing data
Having a binary classification problem, the testing suddenly becomes simple: Just use one of the measures used in literature so often (accuracy, precision, recall, confuscation matrix).
Getting the data might be a bit more complicated. You wrote that you have an XML file of 2000 records. I guess you can derive features from those records automatically and authors have an identifier? Then you can simply generate negative examples by having different authors and positive examples by checking if the identifier is the same.
Otherwise you can have a look at http://dblp.uni-trier.de/. Although there are likely many publications under the same author which should be different, they do distinguish authors not only by name but give them identifiers.
Alternatively, you can train a classifier to classify each of the known authors with e.g. > 30 publications. Then remove the softmax layer and use those features to distinguish the authors.
I am trying to make a recommendation website of books. I have crawled some book sites and, and have around 15 million separate books in the DB, which is in neo4j.
Now for some genres, like mystery and thriller, there are about 1 million books at least. I have to make a top 20 list of recommendations. My current approach-
get the books
run a similarity comparison (vec-cosine or pearsons)
sort and display
are expensive and take time, not at all good for a realtime system. I thought keeping a sorted list per genre by linking neo4j to a traditional DB and getting the top ones from that db via neo4j. But that also is slow (takes a few 10s of seconds). Is there a simpler and more intuitive way to do this? Any ideas will help.
It would be good to know what other criteria you would like to base your recommendations on, e.g. how exactly you measure similarities between books. I'm assuming it's not purely genre based.
One approach we have been taking with these dense nodes (such as your genres, or cities people live in, etc.), is to find recommendations first based on some other criteria, then boost the relevance score of the recommendation if it is connected to the correct dense node. Such a query is much more performant.
For example, when recommending 20 people you should be friends with, I'd find 100 candidates based on all other criteria and then boost the scores of candidates living in the same location as the user we're recommending for. That's 100 single-hop traversals, which will be very quick.
Have a look at this recent webinar recording, you may find some inspiration in it.
Regarding similarity measures, these may need to be pre-computed, linking similar books together by SIMILAR_TO relationships. Such pre-computation might be done using the Runtime of GraphAware Framework, which only executes this background computation during quiet periods, thus not interfering with your regular transactional processing. Look at the NodeRank module, which computes PageRank in Neo4j during quiet periods.
Tried doing a bit of research on the following with no luck. Thought I'd ask here in case someone has come across it before.
I help a volunteer-run radio station with their technology needs. One of the main things that have come up is they would like to schedule their advertising programmatically.
There are a lot of neat and complex rule engines out there for advertising, but all we need is something pretty simple (along with any experience that's worth thinking about).
I would like to write something in SQL if possible to deal with these entities. Ideally if someone has written something like this for other advertising mediums (web, etc.,) it would be really helpful.
Entities:
Ads (consisting of a category, # of plays per day, start date, end date or permanent play)
Ad Category (Restaurant, Health, Food store, etc.)
To over-simplify the problem, this will be a elegant sql statement. Getting there... :)
I would like to be able to generate a playlist per day using the above two entities where:
No two ads in the same category are played within x number of ads of each other.
(nice to have) high promotion ads can be pushed
At this time, there are no "ad slots" to fill. There is no "time of day" considerations.
We queue up the ads for the day and go through them between songs/shows, etc. We know how many per hour we have to fill, etc.
Any thoughts/ideas/links/examples? I'm going to keep on looking and hopefully come across something instead of learning it the long way.
Very interesting question, SMO. Right now it looks like a constraint programming problem because you aren't looking for an optimal solution, just one that satisfies all the constraints you have specified. In response to those who wanted to close the question, I'd say they need to check out constraint programming a bit. It's far closer to stackoverflow that any operations research sites.
Look into constraint programming and scheduling - I'll bet you'll find an analogous problem toot sweet !
Keep us posted on your progress, please.
Ignoring the T-SQL request for the moment since that's unlikely to be the best language to write this in ...
One of my favorites approaches to tough 'layout' problems like this is Simulated Annealing. It's a good approach because you don't need to think HOW to solve the actual problem: all you define is a measure of how good the current layout is (a score if you will) and then you allow random changes that either increase or decrease that score. Over many iterations you gradually reduce the probability of moving to a worse score. This 'simulated annealing' approach reduces the probability of getting stuck in a local minimum.
So in your case the scoring function for a given layout might be based on the distance to the next advert in the same category and the distance to another advert of the same series. If you later have time of day considerations you can easily add them to the score function.
Initially you allocate the adverts sequentially, evenly or randomly within their time window (doesn't really matter which). Now you pick two slots and consider what happens to the score when you switch the contents of those two slots. If either advert moves out of its allowed range you can reject the change immediately. If both are still in range, does it move you to a better overall score? Initially you take changes randomly even if they make it worse but over time you reduce the probability of that happening so that by the end you are moving monotonically towards a better score.
Easy to implement, easy to add new 'rules' that affect score, can easily adjust run-time to accept a 'good enough' answer, ...
Another approach would be to use a genetic algorithm, see this similar question: Best Fit Scheduling Algorithm this is likely harder to program but will probably converge more quickly on a good answer.
I am a student carrying out a study to enhance a search engine's existing algorithm.
I want to know how I can evaluate the search engine - which I have improved - to quantify how much the algorithm was improved.
How should I go about comparing the old and new algorithm?
Thanks
This is normally done by creating a test suite of questions and then evaluating how well the search response answers those questions. In some cases the responses should be unambiguous (if you type slashdot into a search engine you expect to get slashdot.org as your top hit), so you can think of these as a class of hard queries with 'correct' answers.
Most other queries are inherently subjective. To minimise bias you should ask multiple users to try your search engine and rate the results for comparison with the original. Here is an example of a computer science paper that does something similar:
http://www.cs.uic.edu/~liub/searchEval/SearchEngineEvaluation.htm
Regarding specific comparison of the algorithms, although obvious, what you measure depends on what you're interested in knowing. For example, you can compare efficiency in computation, memory usage, crawling overhead or time to return results. If you are trying to produce very specific behaviour, such as running specialist searches (e.g. a literature search) for certain parameters, then you need to explicitly test this.
Heuristics for relevance are also a useful check. For example, when someone uses search terms that are probably 'programming-related', do you tend to get more results from stackoverflow.com? Would your search results be better if you did? If you are providing a set of trust weightings for specific sites or domains (e.g. rating .edu or .ac.uk domains as more trustworthy for technical results), then you need to test the effectiveness of these weightings.
First, let me start out by saying, kudos to you for attempting to apply traditional research methods to search engine results. Many SEO's have done this before you, and generally keep this to themselves as sharing "amazing findings" usually means you can't exploit or have the upper hand anymore, this said I will share as best I can some pointers and things to look for.
Identify what part of the algorithm are you trying to improve?
Different searches execute different algorithms.
Broad Searches
For instance in a broad term search, engines tend to return a variety of results. Common part of these results include
News Feeds
Products
Images
Blog Posts
Local Results (this is based off of a Geo IP lookup).
Which of these result types are thrown into the mix can vary based on the word.
Example: Cats returns images of cats, and news, Shoes returns local shopping for shoes. (this is based on my IP in Chicago on October 6th)
The goal in returning results for a broad term is to provide a little bit of everything for everyone so that everyone is happy.
Regional Modifiers
Generally any time a regional term is attached to a search, it will modify the results greatly. If you search for "Chicago web design" because the word Chicago is attached, the results will start with a top 10 regional results. (these are the one liners to the right of the map), after than 10 listings will display in general "result fashion".
The results in the "top ten local" tend to be drastically different than those in organic listing below. This is because the local results (from google maps) rely on entirely different data for ranking.
Example: Having a phone number on your website with the area code of Chicago will help in local results... but NOT in the general results. Same with address, yellow book listing and so forth.
Results Speed
Currently (as of 10/06/09) Google is beta testing "caffeine" The main highlight of this engine build is that it returns results in almost half the time. Although you may not consider Google to be slow now... speeding up an algorithm is important when millions of searches happen every hour.
Reducing Spam Listings
We have all found experienced a search that was riddled with spam. The new release of Google Caffeine http://www2.sandbox.google.com/ is a good example. Over the last 10+ one of the largest battles online has been between Search Engine Optimizers and Search Engines. Gaming google (and other engines) is highly profitable and what Google spends most of its time combating.
A good example is again the new release of Google Caffeine. So far my research and also a few others in the SEO field are finding this to be the first build in over 5 years to put more weight on Onsite elements (such as keywords, internal site linking, etc) than prior builds. Before this, each "release" seemed to favor inbound links more and more... this is the first to take a step back towards "content".
Ways to test an algorythm.
Compare two builds of the same engine. This is currently possible by comparing Caffeine (see link above or google, google caffeine) and the current Google.
Compare local results in different regions. Try finding search terms like web design, that return local results without a local keyword modifier. Then, use a proxy (found via google) to search from various locations. You will want to make sure you know the proxies location (find a site on google that will tell your your IP address geo IP zipcode or city). Then you can see how different regions return different results.
Warning... DONT pick the term locksmith... and be wary of any terms that when returning result, have LOTS of spammy listings.. Google local is fairly easy to spam, especially in competitive markets.
Do as mentioned in a prior answer, compare how many "click backs" users require to find a result. You should know, currently, no major engines use "bounce rates" as indicators of sites accuracy. This is PROBABLY because it would be EASY to make it look like your result has a bounce rate in the 4-8% range without actually having one that low... in other words it would be easy to game.
Track how many search variations users use on average for a given term in order to find the result that is desired. This is a good indicator of how well an engine is smart guessing the query type (as mentioned WAY up in this answer).
**Disclaimer. These views are based on my industry experience as of October 6th, 2009. One thing about SEO and engines is they change EVERY DAY. Google could release Caffeine tomorrow, and this would change a lot... that said, this is the fun of SEO research!
Cheers
In order to evaluate something, you have to define what you expect from it. This will help to define how to measure it.
Then, you'll be able to measure the improvement.
Concerning a search engine, I guess that you might be able to measure itsability to find things, its accuracy in returning what is relevant.
It's an interesting challenge.
I don't think you will find a final mathematical solution if that is your goal. In order to rate a given algorithm, you require standards and goals that must be accomplished.
What is your baseline to compare against?
What do you classify as "improved"?
What do you consider a "successful search"?
How large is your test group?
What are your tests?
For example, if your goal is to improve the process of page ranking then decide if you are judging the efficiency of the algorithm or the accuracy. Judging efficiency means that you time your code for a consistent large data set and record results. You would then work with your algorithm to improve the time.
If your goal is to improve accuracy then you need to define what is "inaccurate". If you search for "Cup" you can only say that the first site provided is the "best" if you yourself can accurately define what is the best answer for "Cup".
My suggestion for you would be to narrow the scope of your experiment. Define one or two qualities of a search engine that you feel need refinement and work towards improving them.
In the comments you've said "I have heard about a way to measure the quality of the search engines by counting how many time a user need to click a back button before finding the link he wants , but I can use this technique because you need users to test your search engine and that is a headache itself". Well, if you put your engine on the web for free for a few days and advertise a little you will probably get at least a couple dozen tries. Provide these users with the old or new version at random, and measure those clicks.
Other possibility: assume Google is by definition perfect, and compare your answer to its for certain queries. (Maybe sum of distance of your top ten links to their counterparts at Google, for example: if your second link is google's twelveth link, that's 10 distance). That's a huge assumption, but far easier to implement.
Information scientists commonly use precision and recall as two competing measures of quality for an information retrieval system (like a search engine).
So you could measure your search engine's performance relative to Google's by, for example, counting the number of relevant results in the top 10 (call that precision) and the number of important pages for that query that you think should have been in the top 10 but weren't (call that recall).
You'll still need to compare the results from each search engine by hand on some set of queries, but at least you'll have one metric to evaluate them on. And the balance of these two is important too: otherwise you can trivially get perfect precision by not returning any results or perfect recall by returning every page on the web as a result.
The Wikipedia article on precision and recall is quite good (and defines the F-measure which takes into account both).
I have had to test a search engine professionally. This is what I did.
The search included fuzzy logic. The user would type into a web page "Kari Trigger", and the search engine would retrieve entries like "Gary Trager", "Trager, C", "Corey Trager", etc, each with a score from 0->100 so that I could rank them from most likely to least likely.
First, I re-architected the code so that it could be executed removed from the web page, in a batch mode using a big file of search queries as input. For each line in the input file, the batch mode would write out the top search result and its score. I harvested thousands of actual search queries from our production system and ran them thru the batch setup in order to establish a baseline.
From then on, each time I modified the search logic, I would run the batch again and then diff the new results against the baseline. I also wrote tools to make it easier to see the interesting parts of the diff. For example, I didn't really care if the old logic returned "Corey Trager" as an 82 and the new logic returned it as an 83, so my tools would filter those out.
I could not have accomplished as much by hand-crafting test cases. I just wouldn't have had the imagination and insight to have created good test data. The real world data was so much richer.
So, to recap:
1) Create a mechanism that lets you diff the results of running new logic versus the results of prior logic.
2) Test with lots of realistic data.
3) Create tools that help you work with the diff, filtering out the noise, enhancing the signal.
You have to clearly identify positive and negative qualities such as how fast one gets the answer they are seeking or how many "wrong" answers they get on the way there. Is it an improvement if the right answer is #5 but the results are returned 20 times faster? Things like that will be different for each application. The correct answer may be more important in a corporate knowledge base search but a fast answer may be needed for a phone support application.
Without parameters no test can be claimed to be a victory.
Embrace the fact that the quality of search results are ultimately subjective. You should have multiple scoring algorithms for your comparison: The old one, the new one, and a few control groups (e.g. scoring by URI length or page size or some similarly intentionally broken concept). Now pick a bunch of queries that exercise your algorithms, say a hundred or so. Let's say you end up with 4 algorithms total. Make a 4x5 table, displaying the first 5 results of a query across each algorithm. (You could do top ten, but the first five are way more important.) Be sure to randomize which algorithm appears in each column. Then plop a human in front of this thing and have them pick which of the 4 result sets they like best. Repeat across your entire query set. Repeat for as many more humans as you can stand. This should give you a fair comparison based on total wins for each algorithm.
http://www.bingandgoogle.com/
Create an app like this that compares and extracts the data. Then run a test with 50 different things you need to look for and then compare with the results you want.