Does spacemacs provide an option to enable vertical cursors bars? I'm interested in enabling such a mode together with default horizontal cursor bar highlighting.
Unfortunately, I couldn't find any nice out-of-the-box solutions. You could start here to set this up, although ideally this would be submitted to MELPA:
https://www.emacswiki.org/emacs/CrosshairHighlighting
Or you can use the built-in highlight-indentation-current-column-mode to add vertical highlighting to the indentation level of the line you are on. To change the face, use:
(set-face-background 'highlight-indentation-current-column-face "#4e4e4e") ;; insert color of choice
Related
I'm editting a .tsx-file and are reaching upon this bonkers file-formatting:
... If I enlarge the window a bit, then it makes more sense:
But I would still like to change it, so value and onClick aren't aligned all that way to the right. Ideally, it would try to align them with the opening bracket (as they do), unless the opening bracket is more than 35 characters, from the line start. Or something like that.
Now, I assume that it's the TypeScript-formatting that dictates the Code Style for a .tsx-file. But when I open the settings: Editor >> Code Style >> TypeScript then there are BAZILLIONS of settings.
Which leads me to three questions:
Does anyone know what I need to change, so object-attributes doesn't follow the opening-brackets width?
Could I find the name of what I'm looking for, in some smart way? I tried hovering over the massive space, hoping that the little yellow light-bulb could shine some light on, what I was after.
Are there any presets, to be found somewhere? So I don't need to engineer a new Code Style, if I dislike the default.
Make sure that the following option is disabled:
Settings (Preferences on macOS)
Editor | Code Style | TypeScript | Wrapping and Braces
Function call arguments: Align when multiline
NOTE: It is possible that the default value has been changed somewhere since the previous version as I have seen a few questions for the same option but different language (PHP and JavaScript).
HINT 1: Did you know that you can paste your own code in the preview area and start changing options to see how they will affect it? It helps locating the right option a lot.
HINT 2: There is a special popup that shows formatting rules applied to the code. It does not show all possible options but can give you a hint what to look for. To invoke it:
Use Help | Find Action... (or Action tab on Search Everywhere -- they use to be different popups but are using the same popup nowadays)
Type adjust to filer actions
Select and invoke "Adjust code style settings" action
It will give you a popup with applicable rules (it's a limited set: may not list all).
An example for PHP code:
Netbeans 9.0
Win10-64 & Win7-64
I've set my background to black - I forget the motif name and I can't find out how change it again. Java highlighting of same objects (methods, object names, etc.) is all but unreadable. I've tried to find a place to change it (Tools->Options->Fonts & Colors->Highlighting) and can't find the right highlighting option. Ditto for breakpoint highlighting.
And in addition, the cursor can not be seen. Probably the cursor color is black and can't be seen on a black background.
For example, click on internalFrame and others are highlighted and unreadable (the first 'internalFrame' is readable, the rest not):
JInternalFrame internalFrame = new JINternalFrame();
internalFrame.method1();
internalFrame.method2();
Is there a way to change these highlights?
Is there a way to change these highlights?
Yes, but you have to go to different places to change them, depending on what you want to change:
(1) To change most coloring for the edit window containing program source:
Tools > Options > Fonts & Colors
Select the Syntax tab, and then select Java (or whatever language you are using) from the Language drop list.
Most of the options you want to modify are probably listed in the Category window.
Beneath the Category window is a Preview window which will immediately show you the effect of changing the Foreground and/or Background colors for a given Category entry. As an (extreme) example, this screen shot shows the effect of changing the font color to yellow and the background color to red for Java identifiers:
Some Category entries which are not language specific (e.g. URL, Whitespace) can be found by selecting All Languages from the Language drop list.
There is a Restore button in the top right of the screen if you mess up, and want to revert to the defaults.
(2) To change the cursor color:
Tools > Options > Fonts & Colors
Select the Highlighting tab, and then select Caret Color from the Category window.
Select Foreground and Background colors as appropriate.
(3) To change the highlighting for breakpoint lines see the answers to the SO question How to change background color of line highlighting during debug process in Netbeans?
Notes:
Although you didn't ask, you also have limited ability to change the colors used in the Console windows: Tools > Options > Miscellaneous > select the Terminal tab.
There are many dark color schemes available for NetBeans, so if the one you are using has annoying limitations just try some of the alternatives. NetBeans 8.2 offers a few under Tools > Plugins > Available Plugins, such as Darcula LAF for NetBeans, Dark Look And Feel Themes and 2pmTech L&F.
Also, here are a couple of sites that offer many NetBeans themes with previews: https://netbeansthemes.com/ and http://svenspruijt.nl/themebuilder/
I pressed something in Intellij and my caret shape changed to this. How to revert to the normal thickness? Using Intellij 2016.1.
Compare to this, normal thickness should be that of a bold vertical line:
Update: On Android Studio 2.1 beta, same machine, same font settings, cursor is visibly thinner.
You can .. but it's not pixel perfect. I mean -- for me the value does not seem to control thickness in pixels but rather some index (which gets applied to some predefined values) -- at least this is my impression on what I see my computer.
In any case:
Help | Find Action...
Search for registry action
Once in Registry window -- look for editor.caret.width entry
Set the new value (for me the default was 2) -- make sure that field went bold (move to another entry) to ensure that new value was accepted.
Restart IDE (this option requires it)
UPDATE (2017/04/06):
You may also try ThinCaret plugin:
Makes your editor caret 1 pixel thin (for retina users)
You can change it under Settings -> Editor -> General -> Appearance -> Use Block caret
Other caret settings are under Settings -> Editor -> Colors & Fonts -> General. Then if you scroll down to the editor section on the right, there is a caret item in the list with font/color settings.
Please check the Picture for solution.
If you got here because of the thick cursor (block cursor) that behaves differently than the normal thin one. Just press the insert (Ins) button once and you are good to go.
Go to the Keymaps section of the Preferences and add your own Keyboard shortcut if you are using a Mac. Windows users can just enable/disable Insert mode on their keyboard.
PHPStorm has a vertical line on what they call the "right margin" which is set by default to 120 characters or columns...
Given that PSR standards state There MUST NOT be a hard limit on line length; the soft limit MUST be 120 characters; lines SHOULD be 80 characters or less., it'd be nice if I could get another visual indicator at the 80 character mark...
I'm well aware that it says what line/column you're on in the status bar, but I typically hide most panels (status bar included) while coding.
Therefore, is there a way (feature or plugin) that would allow me to add a 2nd vertical line to indicate the 80th column?
It is not currently possible .. and no plugin comes into my mind.
https://youtrack.jetbrains.com/issue/IDEA-99875 -- star/vote/comment to get notified on progress.
P.S. Considering that this is rather PHP/Python specific (other languages do not care about this) .. I would not expect JB to have it implemented in nearest future...
I suggest the following workaround, it works for me on PhpStorm 9.0:
Open Settings page (usually Ctrl+Alt+S), go to Plugins -> Browse Repositories
Find and install BackgroundImage plugin
Restart IDE, it may output an error, something like "unknown protocol d" - don't worry, go forth
Make an image with height=1px, and width=(desired width of additional margin). Give it, say, white background and paint one rightmost pixel to say, black. I took a screenshot of an editor and cropped it in PS, to avoid annoying search and adjustment of the image width. Every change of background image requires to restart PhpStorm.
Open Settings again, goto Other settings -> BackgroundImage
Set Enabled checkbox, browse your created image, and check the FileSystem radio button
Restart IDE again and change the margin and you will get two margins
The image is left-aligned, so when you resize an editor on x-axis (move the splitter between Editor and Project View or File System View, etc.), the margin will remain truthy.
Some side-effects - it appears also on console window, event log, perhaps somewhere else.
If the plugin doesn't work, check out this page (there said that most JetBrains plugins should work on all products on IntelliJ Platform, and some workaround if they does not): http://www.jetbrains.org/intellij/sdk/docs/basics/getting_started/plugin_compatibility.html
ADDED: Doesn't work with scaling an editor (Ctrl + MouseWheel) - the scale of the image (fake margin), remains the same and the margin becomes not truthy.
In the latest PHPStorm, this is now possible. This would be PHPStorm 2017.3. The instructions on the ticket mentioned in the accepted answer explains it quite well:
Will be available in the next EAP build. You can set it up at
Settings|Editor|Code Style|Visual guides for all languages or on
"Wrapping and Braces" tab for a specific language ("Other" tab for
XML/HTML). You can change the visual indent guide color at
Settings|Editor|Color Scheme|General|Guides|Visual guides. Please
submit separate reports if you find any problems.
I personally found the setting in Settings|Editor|Code Style|PHP|Wrapping and Braces|Visual guides. It should be there for every language.
I'm really impressed with the autocomplete feature of the IntelliJ IDE so far.
What I'd like to do, is cycle through the autocomplete suggestions I get when hitting Ctrl + Space without using the arrow keys (↑, ↓).
The reason for this is that I prefer to keep my fingers on the home row (I'm using IntelliJ's Vim emulator additionally).
For example, how would I select sortThis instead of sorted without using the arrow keys or the mouse?
Peter Gromov's answer brought me to a satisfying solution:
In IntelliJ's settings, for Keymap → Editor Actions → Down I set a custom shortcut: Ctrl + J.
This way I can cycle forward through the suggestions.
Setting a shortcut for Down with Selection or Scroll Line Down in the IdeaVim-specific shortcuts did not affect the selection of autocomplete suggestions though.
The answer here: https://stackoverflow.com/a/9713306/2370679 led me to discover that Ctrl+n & Ctrl+p allow navigation of the auto-complete options without having to modify any settings
For macOS the IDE will give a hint that "^↑ and ^↓ will move caret up and down in the editor". These clearly do not work.
There are a few extra steps that are needed after following #matthias-braun's solution.
Here is the full list of step that I use:
Go to Preferences -> Keymap
Expand Editor Actions (not Plug-ins -> IdeaVim)
Select Down
Click the pencil icon or right-click
Select Add Keyboard Shortcut
Press the shortcut (I use ^N)*
Repeat for 3-6 for Up (I use ^P)
Click Ok**
Go to Preferences -> Other Settings -> Vim Emulation
In the drop-down under the Handler column for the row containing Down, select Vim***
Do the same thing for Up
* If you are warned about the key binding already existing then remove it. You can always reset back to the defaults by clicking the little cog icon up the very top to the right of the drop-down menu.
** The Vim Emulation doesn't seem to be populated correctly until you reopen the Preferences.
*** I'm not sure why the Handler should be Vim. This seems backwards to me but it works.
If you're able to scroll up/down in editor with some IdeaVIM-specific shortcuts, they should also work in the completion list.
In this particular case, I'd just type another "t" so that "sortThis" becomes selected (and the only) variant.
I have done the same thing with mapping the arrows but in a more logical way:
I mapped them that when I press 'Alt' 'J' is left, 'L' is right, 'I' is up, and 'k' is down. that way I can have easy access to the arrows while my fingers are on the home row and I don't need to move them nearly as much...
I'm posting it just so people who search it on google can have that idea.