WebLogic and LDAP are integrated, I can see users and groups in the Console security realm. Setup was minimal - simply added and set specs for an AD provider, nothing else.
However, all username combinations I've tried end up in wrong user/password in the analytics login screen, and "access denied" in the BI cluster log.
So what should be the username syntax that AD accounts are to enter? I am trying to allow any AD account to be able to login at this point.
UPDATED per #Chris request:
WL version 12.2.1
Documentation: very vague help screens from the WL console, missing the part I'm trying to figure out specifically
Error from the managed server log/obis1: BI security access is denied - web service credentials are invalid
The account works, however, in Windows Network, AD Server, and is visible inside WL with its specific AD group.
The correct answer to this: you can use the same exact credentials you would while logging to the AD server directly. Getting "invalid user/password" error can be indicative of a lot of other problems stemming from the LDAP Authenticator configuration.
Related
I am attempting to log into an Azure SQL Database using SSMS. I need to be able to log into the database with Active Directory Integrated Authentication. When attempting to login:
I receive this error:
Failed to authenticate the user NT Authority\Anonymous Logon in Active Directory (Authentication=ActiveDirectoryIntegrated).
Error code 0xCAA90002; state 10
WSTrust response does not have recognized SAML assertion. (.Net SqlClient Data Provider)
The following are true:
I am the Active Directory admin in the Azure SQL Server.
The Azure SQL Server Firewall accepts all IP addresses
I am specifying a database under the connection properties tab
I have .NET 4.6 and I'm using SSMS v17.1
Authentication works if I use "Active Directory Universal Authentication".
Any ideas?
Thanks.
This issue is with the AD Syncing options. In my environment, AD is not syncing passwords into the tenant. This prevents AD Integration Authentication and AD Password Authentication. The only authentication that works in this instance is AD Universal Authentication.
This may be due to the old API of ADALSQL.dll that is used by SSMS for Active Directory password. The fact that Active Directory Universal (which uses newer API from ADAL.net) works indicates the issue is in the AD library, not SQL.
I had the same error message, and it turned out to be caused by a password expiry.
As soon as I renewed the password, the error message disappeared.
The existing ldap is only used for authentication. For the application that I created, for example authentication is successful then the user will be able to enter into the system. If not successful then the error message will appear.
How do I set up my own ldap in laravel. with postman and token?
If you can, avoid using LDAP :)
Having said that, try this small tutorial:
laravel-simple-ldap-auth
You will have to ask your IT administrator for the real connection data of your production LDAP server.
I need to get the corporate name this is the basic thing. But my problem is i need to get them through WEB API. I have tried impersonate set to true in web config enabled Windows authentication also. I can get the details locally when i run postman, but the same when i try to access after deploying in server it shows the following things:
1) Corporate domain name returns empty
2) Access denied (when anonymous is set to disable mode)
I am confused whether this can be done without having a windows authentication prompt box. If yes have i missed something while configuring IIS?
Thanks everyone in advance :)
This is way too late to answer this but SSO is what i need and i have come across Ping Identity.
So using SSO i can get the details of the user who are logged in.
PingIdentity - SSO
I have installed an Azure MFA on our network to provide two form Id for our VPN. We are using the Azure MFA pay as you go option where users are added and charged as we add them to the server.
I have import the users from AD. Ninety percent of the users imported work file. I have both enabled an not enabled users listed on the server.
When I run a test from within the MFA server the authentication process works. The server will call the number I have listed and when I press the # key to accept the system returns that that use authenticated ok.
The ones I am have problems with will authenticate with I use the test button on MFA server, but when I try to use the same user to login to the VPN
I get this error
Pfauth failed for user 'CN=test#xxxx.com,CN=Users,DC=xxxx,DC=com' (distinguishedName format) from xxx.xxx.xxx.xxx. Call status: SKIPPED_NO_USER - "Couldn't match supplied username to a defined user".
Other users have no problem logging in.
I have tried to re-import the user, recreate the use manual in the MFA server nothing changes the results.
It looks to me that the error is that the MFA server does not recognize the server. Has anyone seen this problem or can direct me to thing to check.
It looks like you are either securing the VPN using LDAP, or are using RADIUS but doing the primary authentication using LDAP bind. After primary authentication is performed, the MFA Server needs to find the user in its data store to look up the phone number and auth method configured. It either uses Windows SIDs or LDAP unique identifiers to do that lookup. Take a look at Company Settings-->Username Resolution in the MFA Server. It is set to use Windows SIDs by default. Try changing that to use LDAP unique identifiers.
I have a database with LDAP login enabled. It works fine when logging in through the PIA or when logging into app-designer through the application server.
I need to make app-designer allow me to login with 2-tier mode using LDAP authentication. Is this possible without customization?
I do not think this is possible. 2-tier logs directly into the database and more importantly, does not run the signon peoplecode that does call-outs for LDAP authentication. In fact, 2-tier is really just a Win32 app that runs no peoplecode - it isn't a peoplesoft "application." There is a user callout dll delivered with peoplesoft, and some scant documents on what you have to do to use it - but again, likely not going to meet your need. You may need to use the ldap synch online app engine job to pull in your ldap users to security tables if you want to use those login identities for 2-tier access.
The only delivered way to use LDAP Authentication for App Designer is to use connection 3-Tier through the app server. Only with the 3-Tier connection will the Signon PeopleCode be executed. With 2-Tier, there is no hook to the LDAP Server.
You could look at using the Grey Sparling Desktop Single Signon, which does integrate with App Designer and uses Windows and NTLM to grab Active Directory authentication. This would give you some degree of LDAP Authentication if you Windows machine authenticates with a domain. But it is an add-on product you would need to purchase.
Otherwise, as Epictetus mentioned, you can use the LDAP Username if you have it synced with your PeopleSoft database and use the local password stored in PSOPRDEFN.
One problem I have seen is that when using LDAP and 2 tier when you login with LDAP it somehow decrypts the password in PSOPRDEFN. The next login 2 tier by that same account throws the error cannot login please encrypt password using data movoer encrypt password *. If you encrypt that users password the same results happen following that users next LDAP login.