i am usginf this but getting error can u provide a solution.
DECLARE #TableName VARCHAR(500);
SET #TableName = N'CREATE TABLE businessmaster_'+
CONVERT(VARCHAR(10),GetDate()-1,112)+
N' ( contentid int,Businessname varchar(50) )';
print #TableName
declare #sql varchar(100)
SET #sql = 'INSERT INTO'+ #TableName+' (contentid,Businessname) SELECT top 10 contentid,Businessname FROM businessmaster';
EXEC (#sql);
You did not create the table, it should look like this
DECLARE #TableName VARCHAR(500);
SET #TableName = N'businessmaster_'+CONVERT(VARCHAR(10),GetDate()-1,112);
EXEC (N'CREATE TABLE '+#TableName +' ( contentid int,Businessname varchar(50) )')
print #TableName
declare #sql varchar(100)
SET #sql = 'INSERT INTO '+ #TableName+' (contentid,Businessname) SELECT top 10 contentid,Businessname FROM businessmaster';
EXEC (#sql)
You did not create your table, how can you insert data to table not exist:
DECLARE #TableName VARCHAR(MAX);
DECLARE #SQL NVARCHAR(MAX);
SET #TableName = N'businessmaster_'+
CONVERT(VARCHAR(10),GetDate()-1,112);
SET #SQL = N' CREATE TABLE '+#TableName + N' ( contentid int,Businessname varchar(50) )';
EXECUTE (#SQL);
SET #SQL = 'INSERT INTO '+ #TableName+' (contentid,Businessname) SELECT top 10 contentid,Businessname FROM businessmaster';
EXECUTE (#SQL);
Demo.
Related
I am trying to execute this query:
declare #tablename varchar(50)
set #tablename = 'test'
select * from #tablename
This produces the following error:
Msg 1087, Level 16, State 1, Line 5
Must declare the table variable "#tablename".
What's the right way to have the table name populated dynamically?
For static queries, like the one in your question, table names and column names need to be static.
For dynamic queries, you should generate the full SQL dynamically, and use sp_executesql to execute it.
Here is an example of a script used to compare data between the same tables of different databases:
Static query:
SELECT * FROM [DB_ONE].[dbo].[ACTY]
EXCEPT
SELECT * FROM [DB_TWO].[dbo].[ACTY]
Since I want to easily change the name of table and schema, I have created this dynamic query:
declare #schema sysname;
declare #table sysname;
declare #query nvarchar(max);
set #schema = 'dbo'
set #table = 'ACTY'
set #query = '
SELECT * FROM [DB_ONE].' + QUOTENAME(#schema) + '.' + QUOTENAME(#table) + '
EXCEPT
SELECT * FROM [DB_TWO].' + QUOTENAME(#schema) + '.' + QUOTENAME(#table);
EXEC sp_executesql #query
Since dynamic queries have many details that need to be considered and they are hard to maintain, I recommend that you read: The curse and blessings of dynamic SQL
Change your last statement to this:
EXEC('SELECT * FROM ' + #tablename)
This is how I do mine in a stored procedure. The first block will declare the variable, and set the table name based on the current year and month name, in this case TEST_2012OCTOBER. I then check if it exists in the database already, and remove if it does. Then the next block will use a SELECT INTO statement to create the table and populate it with records from another table with parameters.
--DECLARE TABLE NAME VARIABLE DYNAMICALLY
DECLARE #table_name varchar(max)
SET #table_name =
(SELECT 'TEST_'
+ DATENAME(YEAR,GETDATE())
+ UPPER(DATENAME(MONTH,GETDATE())) )
--DROP THE TABLE IF IT ALREADY EXISTS
IF EXISTS(SELECT name
FROM sysobjects
WHERE name = #table_name AND xtype = 'U')
BEGIN
EXEC('drop table ' + #table_name)
END
--CREATES TABLE FROM DYNAMIC VARIABLE AND INSERTS ROWS FROM ANOTHER TABLE
EXEC('SELECT * INTO ' + #table_name + ' FROM dbo.MASTER WHERE STATUS_CD = ''A''')
Use:
CREATE PROCEDURE [dbo].[GetByName]
#TableName NVARCHAR(100)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE #sSQL nvarchar(500);
SELECT #sSQL = N'SELECT * FROM' + QUOTENAME(#TableName);
EXEC sp_executesql #sSQL
END
You can't use a table name for a variable. You'd have to do this instead:
DECLARE #sqlCommand varchar(1000)
SET #sqlCommand = 'SELECT * from yourtable'
EXEC (#sqlCommand)
You'll need to generate the SQL content dynamically:
declare #tablename varchar(50)
set #tablename = 'test'
declare #sql varchar(500)
set #sql = 'select * from ' + #tablename
exec (#sql)
Use sp_executesql to execute any SQL, e.g.
DECLARE #tbl sysname,
#sql nvarchar(4000),
#params nvarchar(4000),
#count int
DECLARE tblcur CURSOR STATIC LOCAL FOR
SELECT object_name(id) FROM syscolumns WHERE name = 'LastUpdated'
ORDER BY 1
OPEN tblcur
WHILE 1 = 1
BEGIN
FETCH tblcur INTO #tbl
IF ##fetch_status <> 0
BREAK
SELECT #sql =
N' SELECT #cnt = COUNT(*) FROM dbo.' + quotename(#tbl) +
N' WHERE LastUpdated BETWEEN #fromdate AND ' +
N' coalesce(#todate, ''99991231'')'
SELECT #params = N'#fromdate datetime, ' +
N'#todate datetime = NULL, ' +
N'#cnt int OUTPUT'
EXEC sp_executesql #sql, #params, '20060101', #cnt = #count OUTPUT
PRINT #tbl + ': ' + convert(varchar(10), #count) + ' modified rows.'
END
DEALLOCATE tblcur
You need to use the SQL Server dynamic SQL:
DECLARE #table NVARCHAR(128),
#sql NVARCHAR(MAX);
SET #table = N'tableName';
SET #sql = N'SELECT * FROM ' + #table;
Use EXEC to execute any SQL:
EXEC (#sql)
Use EXEC sp_executesql to execute any SQL:
EXEC sp_executesql #sql;
Use EXECUTE sp_executesql to execute any SQL:
EXECUTE sp_executesql #sql
Declare #tablename varchar(50)
set #tablename = 'Your table Name'
EXEC('select * from ' + #tablename)
Also, you can use this...
DECLARE #SeqID varchar(150);
DECLARE #TableName varchar(150);
SET #TableName = (Select TableName from Table);
SET #SeqID = 'SELECT NEXT VALUE FOR ' + #TableName + '_Data'
exec (#SeqID)
Declare #fs_e int, #C_Tables CURSOR, #Table varchar(50)
SET #C_Tables = CURSOR FOR
select name from sysobjects where OBJECTPROPERTY(id, N'IsUserTable') = 1 AND name like 'TR_%'
OPEN #C_Tables
FETCH #C_Tables INTO #Table
SELECT #fs_e = sdec.fetch_Status FROM sys.dm_exec_cursors(0) as sdec where sdec.name = '#C_Tables'
WHILE ( #fs_e <> -1)
BEGIN
exec('Select * from ' + #Table)
FETCH #C_Tables INTO #Table
SELECT #fs_e = sdec.fetch_Status FROM sys.dm_exec_cursors(0) as sdec where sdec.name = '#C_Tables'
END
I am trying to execute this query:
declare #tablename varchar(50)
set #tablename = 'test'
select * from #tablename
This produces the following error:
Msg 1087, Level 16, State 1, Line 5
Must declare the table variable "#tablename".
What's the right way to have the table name populated dynamically?
For static queries, like the one in your question, table names and column names need to be static.
For dynamic queries, you should generate the full SQL dynamically, and use sp_executesql to execute it.
Here is an example of a script used to compare data between the same tables of different databases:
Static query:
SELECT * FROM [DB_ONE].[dbo].[ACTY]
EXCEPT
SELECT * FROM [DB_TWO].[dbo].[ACTY]
Since I want to easily change the name of table and schema, I have created this dynamic query:
declare #schema sysname;
declare #table sysname;
declare #query nvarchar(max);
set #schema = 'dbo'
set #table = 'ACTY'
set #query = '
SELECT * FROM [DB_ONE].' + QUOTENAME(#schema) + '.' + QUOTENAME(#table) + '
EXCEPT
SELECT * FROM [DB_TWO].' + QUOTENAME(#schema) + '.' + QUOTENAME(#table);
EXEC sp_executesql #query
Since dynamic queries have many details that need to be considered and they are hard to maintain, I recommend that you read: The curse and blessings of dynamic SQL
Change your last statement to this:
EXEC('SELECT * FROM ' + #tablename)
This is how I do mine in a stored procedure. The first block will declare the variable, and set the table name based on the current year and month name, in this case TEST_2012OCTOBER. I then check if it exists in the database already, and remove if it does. Then the next block will use a SELECT INTO statement to create the table and populate it with records from another table with parameters.
--DECLARE TABLE NAME VARIABLE DYNAMICALLY
DECLARE #table_name varchar(max)
SET #table_name =
(SELECT 'TEST_'
+ DATENAME(YEAR,GETDATE())
+ UPPER(DATENAME(MONTH,GETDATE())) )
--DROP THE TABLE IF IT ALREADY EXISTS
IF EXISTS(SELECT name
FROM sysobjects
WHERE name = #table_name AND xtype = 'U')
BEGIN
EXEC('drop table ' + #table_name)
END
--CREATES TABLE FROM DYNAMIC VARIABLE AND INSERTS ROWS FROM ANOTHER TABLE
EXEC('SELECT * INTO ' + #table_name + ' FROM dbo.MASTER WHERE STATUS_CD = ''A''')
Use:
CREATE PROCEDURE [dbo].[GetByName]
#TableName NVARCHAR(100)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE #sSQL nvarchar(500);
SELECT #sSQL = N'SELECT * FROM' + QUOTENAME(#TableName);
EXEC sp_executesql #sSQL
END
You can't use a table name for a variable. You'd have to do this instead:
DECLARE #sqlCommand varchar(1000)
SET #sqlCommand = 'SELECT * from yourtable'
EXEC (#sqlCommand)
You'll need to generate the SQL content dynamically:
declare #tablename varchar(50)
set #tablename = 'test'
declare #sql varchar(500)
set #sql = 'select * from ' + #tablename
exec (#sql)
Use sp_executesql to execute any SQL, e.g.
DECLARE #tbl sysname,
#sql nvarchar(4000),
#params nvarchar(4000),
#count int
DECLARE tblcur CURSOR STATIC LOCAL FOR
SELECT object_name(id) FROM syscolumns WHERE name = 'LastUpdated'
ORDER BY 1
OPEN tblcur
WHILE 1 = 1
BEGIN
FETCH tblcur INTO #tbl
IF ##fetch_status <> 0
BREAK
SELECT #sql =
N' SELECT #cnt = COUNT(*) FROM dbo.' + quotename(#tbl) +
N' WHERE LastUpdated BETWEEN #fromdate AND ' +
N' coalesce(#todate, ''99991231'')'
SELECT #params = N'#fromdate datetime, ' +
N'#todate datetime = NULL, ' +
N'#cnt int OUTPUT'
EXEC sp_executesql #sql, #params, '20060101', #cnt = #count OUTPUT
PRINT #tbl + ': ' + convert(varchar(10), #count) + ' modified rows.'
END
DEALLOCATE tblcur
You need to use the SQL Server dynamic SQL:
DECLARE #table NVARCHAR(128),
#sql NVARCHAR(MAX);
SET #table = N'tableName';
SET #sql = N'SELECT * FROM ' + #table;
Use EXEC to execute any SQL:
EXEC (#sql)
Use EXEC sp_executesql to execute any SQL:
EXEC sp_executesql #sql;
Use EXECUTE sp_executesql to execute any SQL:
EXECUTE sp_executesql #sql
Declare #tablename varchar(50)
set #tablename = 'Your table Name'
EXEC('select * from ' + #tablename)
Also, you can use this...
DECLARE #SeqID varchar(150);
DECLARE #TableName varchar(150);
SET #TableName = (Select TableName from Table);
SET #SeqID = 'SELECT NEXT VALUE FOR ' + #TableName + '_Data'
exec (#SeqID)
Declare #fs_e int, #C_Tables CURSOR, #Table varchar(50)
SET #C_Tables = CURSOR FOR
select name from sysobjects where OBJECTPROPERTY(id, N'IsUserTable') = 1 AND name like 'TR_%'
OPEN #C_Tables
FETCH #C_Tables INTO #Table
SELECT #fs_e = sdec.fetch_Status FROM sys.dm_exec_cursors(0) as sdec where sdec.name = '#C_Tables'
WHILE ( #fs_e <> -1)
BEGIN
exec('Select * from ' + #Table)
FETCH #C_Tables INTO #Table
SELECT #fs_e = sdec.fetch_Status FROM sys.dm_exec_cursors(0) as sdec where sdec.name = '#C_Tables'
END
I have 2 table (same name) on 2 different database
I want compare these table, this is my procedure
ALTER PROCEDURE COUNTCOLUMN
#TABLENAME NVARCHAR(MAX),
#DATABASENAME1 NVARCHAR(MAX),
#DATABASENAME2 NVARCHAR(MAX)
AS
BEGIN
DECLARE #COLNAME NVARCHAR(MAX)
DECLARE #ROWCOUNT INT
DECLARE #ROWCOUNT2 INT
DECLARE #NUMB1 INT
DECLARE #NUMB2 INT
DECLARE #SQLQUERY NVARCHAR(MAX)
DECLARE #SQLQUERY2 NVARCHAR(MAX)
DECLARE #SQLQUERY3 NVARCHAR(MAX)
DECLARE #SQLQUERY4 NVARCHAR(MAX)
DECLARE #SQLQUERY5 NVARCHAR(MAX)
DECLARE #SQLQUERY6 NVARCHAR(MAX)
SET #SQLQUERY = 'SELECT #NUMBER = COUNT(*) FROM information_schema.columns WHERE table_name = '+N'#TESTTB'+''
SET #SQLQUERY2 = 'USE ' + #DATABASENAME1
SET #SQLQUERY3 = 'USE ' + #DATABASENAME2
EXECUTE sp_executesql #SQLQUERY2
EXECUTE sp_executesql #SQLQUERY, N'#TESTTB NVARCHAR(MAX), #NUMBER INT OUTPUT',#TESTTB = #TABLENAME ,#NUMBER = #NUMB1 OUTPUT
EXECUTE sp_executesql #SQLQUERY3
EXECUTE sp_executesql #SQLQUERY, N'#TESTTB NVARCHAR(MAX), #NUMBER INT OUTPUT',#TESTTB = #TABLENAME ,#NUMBER = #NUMB2 OUTPUT
IF(#NUMB1 <= #NUMB2)
BEGIN
DECLARE #NUMB INT
SET #NUMB = 1
WHILE (#NUMB <= #NUMB1)
BEGIN
IF (EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'TEMP1'))
BEGIN
DROP TABLE TEMP1
END
IF (EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'TEMP2'))
BEGIN
DROP TABLE TEMP2
END
ELSE
BEGIN
SET #SQLQUERY4 = 'SELECT #COL_NAME = COL_NAME(OBJECT_ID(#TABLENAME), #NUMB)'
EXECUTE sp_executesql #SQLQUERY2
EXECUTE sp_executesql #SQLQUERY4, N'#TABLENAME NVARCHAR(MAX),#NUMB INT, #COL_NAME NVARCHAR(MAX) OUTPUT', #TABLENAME = #TABLENAME,#NUMB=#NUMB, #COL_NAME = #COLNAME OUTPUT
SET #SQLQUERY5 = 'SELECT '+ #COLNAME + ' INTO TEST_DB..TEMP1 FROM ' + #TABLENAME
EXECUTE sp_executesql #SQLQUERY2
EXECUTE sp_executesql #SQLQUERY5
EXECUTE sp_executesql #SQLQUERY3
EXECUTE sp_executesql #SQLQUERY4, N'#TABLENAME NVARCHAR(MAX),#NUMB INT, #COL_NAME NVARCHAR(MAX) OUTPUT', #TABLENAME = #TABLENAME,#NUMB=#NUMB, #COL_NAME = #COLNAME OUTPUT
SET #SQLQUERY6 = 'SELECT ' + #COLNAME +' INTO TEST_DB..TEMP2 FROM '+ #TABLENAME
EXECUTE sp_executesql #SQLQUERY3
EXECUTE sp_executesql #SQLQUERY6
SELECT #ROWCOUNT = COUNT(*) FROM TEMP1
SELECT #ROWCOUNT2 = COUNT(*) FROM TEMP2
IF(#ROWCOUNT != #ROWCOUNT2)
BEGIN
PRINT N'NUMBER OF ROWS ARE NOT EQUAL';
BREAK
END
ELSE IF (#NUMB > #NUMB1)
BREAK
ELSE
BEGIN
SELECT * FROM TEST_DB..TEMP1
EXCEPT
SELECT * FROM TEST_DB..TEMP2
SET #NUMB = #NUMB + 1;
CONTINUE
END
END
END
END
END
It should be like this TEMP1 <--TEST_DB..TESTTABLE, TEMP2 <--TEST_DB2..TESTTABLE
But TEMP1 , TEMP2 always have the same values as TESTTABLE from the first database (TEST_DB )
It seem like I can't switch between two databases in procedure so I try to run it separate but still not work
I am trying to execute this query:
declare #tablename varchar(50)
set #tablename = 'test'
select * from #tablename
This produces the following error:
Msg 1087, Level 16, State 1, Line 5
Must declare the table variable "#tablename".
What's the right way to have the table name populated dynamically?
For static queries, like the one in your question, table names and column names need to be static.
For dynamic queries, you should generate the full SQL dynamically, and use sp_executesql to execute it.
Here is an example of a script used to compare data between the same tables of different databases:
Static query:
SELECT * FROM [DB_ONE].[dbo].[ACTY]
EXCEPT
SELECT * FROM [DB_TWO].[dbo].[ACTY]
Since I want to easily change the name of table and schema, I have created this dynamic query:
declare #schema sysname;
declare #table sysname;
declare #query nvarchar(max);
set #schema = 'dbo'
set #table = 'ACTY'
set #query = '
SELECT * FROM [DB_ONE].' + QUOTENAME(#schema) + '.' + QUOTENAME(#table) + '
EXCEPT
SELECT * FROM [DB_TWO].' + QUOTENAME(#schema) + '.' + QUOTENAME(#table);
EXEC sp_executesql #query
Since dynamic queries have many details that need to be considered and they are hard to maintain, I recommend that you read: The curse and blessings of dynamic SQL
Change your last statement to this:
EXEC('SELECT * FROM ' + #tablename)
This is how I do mine in a stored procedure. The first block will declare the variable, and set the table name based on the current year and month name, in this case TEST_2012OCTOBER. I then check if it exists in the database already, and remove if it does. Then the next block will use a SELECT INTO statement to create the table and populate it with records from another table with parameters.
--DECLARE TABLE NAME VARIABLE DYNAMICALLY
DECLARE #table_name varchar(max)
SET #table_name =
(SELECT 'TEST_'
+ DATENAME(YEAR,GETDATE())
+ UPPER(DATENAME(MONTH,GETDATE())) )
--DROP THE TABLE IF IT ALREADY EXISTS
IF EXISTS(SELECT name
FROM sysobjects
WHERE name = #table_name AND xtype = 'U')
BEGIN
EXEC('drop table ' + #table_name)
END
--CREATES TABLE FROM DYNAMIC VARIABLE AND INSERTS ROWS FROM ANOTHER TABLE
EXEC('SELECT * INTO ' + #table_name + ' FROM dbo.MASTER WHERE STATUS_CD = ''A''')
Use:
CREATE PROCEDURE [dbo].[GetByName]
#TableName NVARCHAR(100)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE #sSQL nvarchar(500);
SELECT #sSQL = N'SELECT * FROM' + QUOTENAME(#TableName);
EXEC sp_executesql #sSQL
END
You can't use a table name for a variable. You'd have to do this instead:
DECLARE #sqlCommand varchar(1000)
SET #sqlCommand = 'SELECT * from yourtable'
EXEC (#sqlCommand)
You'll need to generate the SQL content dynamically:
declare #tablename varchar(50)
set #tablename = 'test'
declare #sql varchar(500)
set #sql = 'select * from ' + #tablename
exec (#sql)
Use sp_executesql to execute any SQL, e.g.
DECLARE #tbl sysname,
#sql nvarchar(4000),
#params nvarchar(4000),
#count int
DECLARE tblcur CURSOR STATIC LOCAL FOR
SELECT object_name(id) FROM syscolumns WHERE name = 'LastUpdated'
ORDER BY 1
OPEN tblcur
WHILE 1 = 1
BEGIN
FETCH tblcur INTO #tbl
IF ##fetch_status <> 0
BREAK
SELECT #sql =
N' SELECT #cnt = COUNT(*) FROM dbo.' + quotename(#tbl) +
N' WHERE LastUpdated BETWEEN #fromdate AND ' +
N' coalesce(#todate, ''99991231'')'
SELECT #params = N'#fromdate datetime, ' +
N'#todate datetime = NULL, ' +
N'#cnt int OUTPUT'
EXEC sp_executesql #sql, #params, '20060101', #cnt = #count OUTPUT
PRINT #tbl + ': ' + convert(varchar(10), #count) + ' modified rows.'
END
DEALLOCATE tblcur
You need to use the SQL Server dynamic SQL:
DECLARE #table NVARCHAR(128),
#sql NVARCHAR(MAX);
SET #table = N'tableName';
SET #sql = N'SELECT * FROM ' + #table;
Use EXEC to execute any SQL:
EXEC (#sql)
Use EXEC sp_executesql to execute any SQL:
EXEC sp_executesql #sql;
Use EXECUTE sp_executesql to execute any SQL:
EXECUTE sp_executesql #sql
Declare #tablename varchar(50)
set #tablename = 'Your table Name'
EXEC('select * from ' + #tablename)
Also, you can use this...
DECLARE #SeqID varchar(150);
DECLARE #TableName varchar(150);
SET #TableName = (Select TableName from Table);
SET #SeqID = 'SELECT NEXT VALUE FOR ' + #TableName + '_Data'
exec (#SeqID)
Declare #fs_e int, #C_Tables CURSOR, #Table varchar(50)
SET #C_Tables = CURSOR FOR
select name from sysobjects where OBJECTPROPERTY(id, N'IsUserTable') = 1 AND name like 'TR_%'
OPEN #C_Tables
FETCH #C_Tables INTO #Table
SELECT #fs_e = sdec.fetch_Status FROM sys.dm_exec_cursors(0) as sdec where sdec.name = '#C_Tables'
WHILE ( #fs_e <> -1)
BEGIN
exec('Select * from ' + #Table)
FETCH #C_Tables INTO #Table
SELECT #fs_e = sdec.fetch_Status FROM sys.dm_exec_cursors(0) as sdec where sdec.name = '#C_Tables'
END
I am trying to execute this query:
declare #tablename varchar(50)
set #tablename = 'test'
select * from #tablename
This produces the following error:
Msg 1087, Level 16, State 1, Line 5
Must declare the table variable "#tablename".
What's the right way to have the table name populated dynamically?
For static queries, like the one in your question, table names and column names need to be static.
For dynamic queries, you should generate the full SQL dynamically, and use sp_executesql to execute it.
Here is an example of a script used to compare data between the same tables of different databases:
Static query:
SELECT * FROM [DB_ONE].[dbo].[ACTY]
EXCEPT
SELECT * FROM [DB_TWO].[dbo].[ACTY]
Since I want to easily change the name of table and schema, I have created this dynamic query:
declare #schema sysname;
declare #table sysname;
declare #query nvarchar(max);
set #schema = 'dbo'
set #table = 'ACTY'
set #query = '
SELECT * FROM [DB_ONE].' + QUOTENAME(#schema) + '.' + QUOTENAME(#table) + '
EXCEPT
SELECT * FROM [DB_TWO].' + QUOTENAME(#schema) + '.' + QUOTENAME(#table);
EXEC sp_executesql #query
Since dynamic queries have many details that need to be considered and they are hard to maintain, I recommend that you read: The curse and blessings of dynamic SQL
Change your last statement to this:
EXEC('SELECT * FROM ' + #tablename)
This is how I do mine in a stored procedure. The first block will declare the variable, and set the table name based on the current year and month name, in this case TEST_2012OCTOBER. I then check if it exists in the database already, and remove if it does. Then the next block will use a SELECT INTO statement to create the table and populate it with records from another table with parameters.
--DECLARE TABLE NAME VARIABLE DYNAMICALLY
DECLARE #table_name varchar(max)
SET #table_name =
(SELECT 'TEST_'
+ DATENAME(YEAR,GETDATE())
+ UPPER(DATENAME(MONTH,GETDATE())) )
--DROP THE TABLE IF IT ALREADY EXISTS
IF EXISTS(SELECT name
FROM sysobjects
WHERE name = #table_name AND xtype = 'U')
BEGIN
EXEC('drop table ' + #table_name)
END
--CREATES TABLE FROM DYNAMIC VARIABLE AND INSERTS ROWS FROM ANOTHER TABLE
EXEC('SELECT * INTO ' + #table_name + ' FROM dbo.MASTER WHERE STATUS_CD = ''A''')
Use:
CREATE PROCEDURE [dbo].[GetByName]
#TableName NVARCHAR(100)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE #sSQL nvarchar(500);
SELECT #sSQL = N'SELECT * FROM' + QUOTENAME(#TableName);
EXEC sp_executesql #sSQL
END
You can't use a table name for a variable. You'd have to do this instead:
DECLARE #sqlCommand varchar(1000)
SET #sqlCommand = 'SELECT * from yourtable'
EXEC (#sqlCommand)
You'll need to generate the SQL content dynamically:
declare #tablename varchar(50)
set #tablename = 'test'
declare #sql varchar(500)
set #sql = 'select * from ' + #tablename
exec (#sql)
Use sp_executesql to execute any SQL, e.g.
DECLARE #tbl sysname,
#sql nvarchar(4000),
#params nvarchar(4000),
#count int
DECLARE tblcur CURSOR STATIC LOCAL FOR
SELECT object_name(id) FROM syscolumns WHERE name = 'LastUpdated'
ORDER BY 1
OPEN tblcur
WHILE 1 = 1
BEGIN
FETCH tblcur INTO #tbl
IF ##fetch_status <> 0
BREAK
SELECT #sql =
N' SELECT #cnt = COUNT(*) FROM dbo.' + quotename(#tbl) +
N' WHERE LastUpdated BETWEEN #fromdate AND ' +
N' coalesce(#todate, ''99991231'')'
SELECT #params = N'#fromdate datetime, ' +
N'#todate datetime = NULL, ' +
N'#cnt int OUTPUT'
EXEC sp_executesql #sql, #params, '20060101', #cnt = #count OUTPUT
PRINT #tbl + ': ' + convert(varchar(10), #count) + ' modified rows.'
END
DEALLOCATE tblcur
You need to use the SQL Server dynamic SQL:
DECLARE #table NVARCHAR(128),
#sql NVARCHAR(MAX);
SET #table = N'tableName';
SET #sql = N'SELECT * FROM ' + #table;
Use EXEC to execute any SQL:
EXEC (#sql)
Use EXEC sp_executesql to execute any SQL:
EXEC sp_executesql #sql;
Use EXECUTE sp_executesql to execute any SQL:
EXECUTE sp_executesql #sql
Declare #tablename varchar(50)
set #tablename = 'Your table Name'
EXEC('select * from ' + #tablename)
Also, you can use this...
DECLARE #SeqID varchar(150);
DECLARE #TableName varchar(150);
SET #TableName = (Select TableName from Table);
SET #SeqID = 'SELECT NEXT VALUE FOR ' + #TableName + '_Data'
exec (#SeqID)
Declare #fs_e int, #C_Tables CURSOR, #Table varchar(50)
SET #C_Tables = CURSOR FOR
select name from sysobjects where OBJECTPROPERTY(id, N'IsUserTable') = 1 AND name like 'TR_%'
OPEN #C_Tables
FETCH #C_Tables INTO #Table
SELECT #fs_e = sdec.fetch_Status FROM sys.dm_exec_cursors(0) as sdec where sdec.name = '#C_Tables'
WHILE ( #fs_e <> -1)
BEGIN
exec('Select * from ' + #Table)
FETCH #C_Tables INTO #Table
SELECT #fs_e = sdec.fetch_Status FROM sys.dm_exec_cursors(0) as sdec where sdec.name = '#C_Tables'
END