Earlier I was able to populate a combo box depending on what another combo box has selected, I then continued on with writing code, and I come back to test it again, and it no longer populates that list, it does with another list, but one of them doesn't. So it populates the drink's, but not the main. I'm not sure what's gone on for this to happen, it all seems okay to me.
Public Shared cmbCatDrinks As String = "Drinks"
Public Shared cmbCatMain As String = "Main"
Public Shared cmbCatBlank As String = ""
Public Shared cmbItemBlank As String = ""
Private Sub frmRestaurantOrd_Load(sender As Object, e As EventArgs) Handles MyBase.Load
cmbCat.Items.Add(cmbCatBlank)
cmbCat.Items.Add(cmbCatDrinks)
cmbCat.Items.Add(cmbCatMain)
End Sub
Private Sub cmbCat_SelectedIndexChanged(sender As Object, e As EventArgs) Handles cmbCat.SelectedIndexChanged
If cmbCat.SelectedItem = "Drinks" Then
cmbItem.Items.Add("Water")
cmbItem.Items.Add("Orange Juice")
cmbItem.Items.Add("Coca Cola")
cmbItem.Items.Add("Beer")
cmbSize.Items.Clear()
ElseIf cmbCat.SelectedItem = "Main" Then
cmbItem.Items.Add("Cheese and Tomato")
cmbItem.Items.Add("Ham and Pineapple")
cmbItem.Items.Add("Vegetarian")
cmbItem.Items.Add("Meat Feast")
cmbItem.Items.Add("Seafood")
cmbSize.Items.Add("Small")
cmbSize.Items.Add("Medium")
cmbSize.Items.Add("Large")
cmbItem.Items.Clear()
Else cmbCat.SelectedItem = cmbCatBlank
cmbItem.Items.Clear()
End If
End Sub
You are clearing the items you just added to cmbItem when "Main" is selected.
ElseIf cmbCat.SelectedItem = "Main" Then
cmbItem.Items.Add("Cheese and Tomato")
cmbItem.Items.Add("Ham and Pineapple")
cmbItem.Items.Add("Vegetarian")
cmbItem.Items.Add("Meat Feast")
cmbItem.Items.Add("Seafood")
cmbSize.Items.Add("Small")
cmbSize.Items.Add("Medium")
cmbSize.Items.Add("Large")
cmbItem.Items.Clear() ' <-- this is clearing all the items you just added.
Related
I am working with forms in VB.NET
There is a DatagridView table with a checkbox column.
See the picture below:
I am interested in the question: how to add the line index to the list when clicking in the checkbox (when we activate the checked status), and remove it from the list when we uncheck the checkbox?
Tried the following but this is not the correct solution:
If e.ColumnIndex = chk_column.Index Then
If e.RowIndex >= 0 Then
Try
For Each row As DataGridViewRow In dataGridNames.Rows
Dim cell As DataGridViewCheckBoxCell = TryCast(row.Cells(5), DataGridViewCheckBoxCell)
If cell.Value Is cell.FalseValue Then
bList_indexes.Add(DataGridnames.CurrentCell.RowIndex)
Exit For
Else 'If cell.Value Is cell.TrueValue Then
bList_indexes.RemoveAt(DataGridnames.CurrentCell.RowIndex)
End If
Next
Catch ex As Exception
'Show the exception's message.
'MessageBox.Show(ex.Message)
'Throw New Exception("Something happened.")
End try
End If
End If
Using DataSources allows you to take the logic out of mucking around in DataGridView events. You shouldn't perform [much] business logic on the UI anyways.
Here is the class I used to represent your data.
Public Class ClassWithSelect
Public Property [Select] As Boolean
Public Property Name As String
Public Sub New(s As Boolean, n As String)
Me.Select = s
Me.Name = n
End Sub
End Class
And all the code to set DataSources
Private myDataSource As List(Of ClassWithSelect)
Private selectedIndices As List(Of Integer)
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
myDataSource = Enumerable.Range(65, 10).Select(Function(i) New ClassWithSelect(False, Chr(i).ToString())).ToList()
DataGridView1.DataSource = myDataSource
updateSelectedIndices()
End Sub
Private Sub DataGridView1_CellValueChanged(sender As Object, e As DataGridViewCellEventArgs) Handles DataGridView1.CellValueChanged
updateSelectedIndices()
End Sub
Private Sub DataGridView1_CellContentClick(sender As Object, e As DataGridViewCellEventArgs) Handles DataGridView1.CellContentClick
DataGridView1.CommitEdit(DataGridViewDataErrorContexts.Commit)
End Sub
Private Sub updateSelectedIndices()
selectedIndices = New List(Of Integer)()
For i = 0 To myDataSource.Count - 1
If myDataSource(i).Select Then selectedIndices.Add(i)
Next
ListBox1.DataSource = selectedIndices
End Sub
And the end result
Now you don't need to access the UI to get the indices for further processing as they are in the class-level variable selectedIndices. The UI is meant for user I/O, NOT for storing state.
Note: The event handler was taken from this answer but this answer is also linked as an improvement to the check change handler, but I felt the complexity would distract from my answer. If you find you need to click fast, look into the latter.
Also Note: The method updateSelectedIndices() should have inside it an InvokeRequired check if you plan to perform work off the UI thread
I'm creating an inventory management system where the data is stored in a text file. I'm able to save data to the text file, however on the tracker screen it should show current inventory such as: Manufacturer, Processor, Video, Form, RAM, etc. However, all my text boxes remain blank and I'm not sure why. It's not reading properly or updating the text.
frmTracker.vb
Private Sub txtManufacturer_TextChanged(sender As Object, e As EventArgs) Handles txtManufacturer.TextChanged
Dim objMyStreamReader = System.IO.File.OpenText("inventory.txt")
Dim strInventory = objMyStreamReader.ReadLine()
objMyStreamReader.Close()
txtManufacturer.AppendText(strInventory)
End Sub
This is how I'm currently saving the data to the text file.
frmItemEntry.vb
Private Sub btnSave_Click(sender As Object, e As EventArgs) Handles btnSave.Click
Dim objMyStreamReader As System.IO.StreamReader
Dim objMyStreamWriter As System.IO.StreamWriter = System.IO.File.CreateText("inventory.txt")
Dim strInventory As String
objMyStreamWriter.WriteLine(txtManufacturerEntry.Text)
objMyStreamWriter.WriteLine(txtProcessorEntry.Text)
objMyStreamWriter.WriteLine(txtVideoEntry.Text)
objMyStreamWriter.WriteLine(txtFormEntry.Text)
objMyStreamWriter.WriteLine(txtRamEntry.Text)
objMyStreamWriter.WriteLine(txtVramEntry.Text)
objMyStreamWriter.WriteLine(txtHdEntry.Text)
objMyStreamWriter.WriteLine(chkWirelessEntry.CheckState)
objMyStreamWriter.Close()
Me.Close()
End Sub
Example from inventory.txt
Dell
i5
Nvidia
Desktop
8
4
600
0
To be honest, controls should never be used as the primary store for your data in a program. You should really be creating a class and a list of that class to store your data.
You can then read your data into the list from your file, and then, display it from there in your form.
There are several ways of navigating through the data and saving updates. The suggestion below uses buttons for next item and previous item, and a button to save update the file.
It's all pretty self explanatory, but if there's something your not sure about, please have a google and learn something new :-D
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
ReadDataFile()
DisplayItem(0)
End Sub
Private Class InventoryItem
Public Property Manufacturer As String
Public Property Processor As String
Public Property Video As String
Public Property FormFactor As String
Public Property Ram As String
Public Property VRam As String
Public Property Hd As String
Public Property Wireless As CheckState
Public Sub New()
Manufacturer = ""
Processor = ""
Video = ""
FormFactor = ""
Ram = ""
VRam = ""
Hd = ""
Wireless = CheckState.Unchecked
End Sub
End Class
Dim Inventory As New List(Of InventoryItem)
Dim currentItemIndex As Integer
Private Sub ReadDataFile()
Using objMyStreamReader As New StreamReader("k:\inventory.txt")
Do Until objMyStreamReader.EndOfStream
Dim newItem As New InventoryItem
newItem.Manufacturer = objMyStreamReader.ReadLine()
newItem.Processor = objMyStreamReader.ReadLine()
newItem.Video = objMyStreamReader.ReadLine()
newItem.FormFactor = objMyStreamReader.ReadLine()
newItem.Ram = objMyStreamReader.ReadLine()
newItem.VRam = objMyStreamReader.ReadLine()
newItem.Hd = objMyStreamReader.ReadLine()
Dim wirelessValue As String = objMyStreamReader.ReadLine()
If wirelessValue = "0" Then
newItem.Wireless = CheckState.Unchecked
ElseIf wirelessValue = "1" Then
newItem.Wireless = CheckState.Checked
End If
Inventory.Add(newItem)
Loop
End Using
End Sub
Private Sub SaveDataFile()
Using objMyStreamWriter As New System.IO.StreamWriter("k:\inventory.txt", False)
For Each item As InventoryItem In Inventory
objMyStreamWriter.WriteLine(item.Manufacturer)
objMyStreamWriter.WriteLine(item.Processor)
objMyStreamWriter.WriteLine(item.Video)
objMyStreamWriter.WriteLine(item.FormFactor)
objMyStreamWriter.WriteLine(item.Ram)
objMyStreamWriter.WriteLine(item.VRam)
objMyStreamWriter.WriteLine(item.Hd)
If item.Wireless = CheckState.Checked Then
objMyStreamWriter.WriteLine("1")
Else
objMyStreamWriter.WriteLine(0)
End If
Next
End Using
End Sub
Private Sub DisplayItem(index As Integer)
With Inventory(index)
txtManufacturerEntry.Text = .Manufacturer
txtProcessorEntry.Text = .Processor
txtVideoEntry.Text = .Video
txtFormEntry.Text = .FormFactor
txtRamEntry.Text = .Ram
txtVramEntry.Text = .VRam
txtHdEntry.Text = .Hd
chkWirelessEntry.CheckState = .Wireless
End With
End Sub
Private Sub BtnUpdateItem_Click(sender As Object, e As EventArgs) Handles BtnUpdateItem.Click
With Inventory(currentItemIndex)
.Manufacturer = txtManufacturerEntry.Text
.Processor = txtProcessorEntry.Text
.Video = txtVideoEntry.Text
.FormFactor = txtFormEntry.Text
.Ram = txtRamEntry.Text
.VRam = txtVramEntry.Text
.Hd = txtHdEntry.Text
.Wireless = chkWirelessEntry.CheckState
End With
SaveDataFile()
End Sub
Private Sub BtnPreviousItem_Click(sender As Object, e As EventArgs) Handles BtnPreviousItem.Click
If currentItemIndex > 0 Then
currentItemIndex -= 1
DisplayItem(currentItemIndex)
End If
End Sub
Private Sub BtnNextItem_Click(sender As Object, e As EventArgs) Handles BtnNextItem.Click
If currentItemIndex < Inventory.Count - 1 Then
currentItemIndex -= 1
DisplayItem(currentItemIndex)
End If
End Sub
First change the format of your text file.
Dell,i5,Nvidia,Desktop,8,2,600,True
Acer,i7,Intel,Desktop,16,4,1GB,True
HP,Pentium,Diamond Viper,Desktop,4,2,200,False
Surface Pro,i7,Intel,Laptop,8,2,500,True
Each line is a record and each field in the record is separated by a comma (no spaces so we don't have to .Trim in code) (a space within a field is fine, notice Surface Pro).
Now it is easier to read the file in code.
This solution uses a BindingSource and DataBindings. This simplifies Navigation and editing and saving the data.
Public Class Form5
Private bs As BindingSource
Private dt As New DataTable
#Region "Set Up the Form"
Private Sub Form5_Load(sender As Object, e As EventArgs) Handles MyBase.Load
AddColumnsToDataTable()
FillDataTable()
AddDataBindings()
End Sub
Private Sub AddColumnsToDataTable()
'Prepare the DataTable to hold data
dt.Columns.Add("Manufacturer", GetType(String))
dt.Columns.Add("Processor", GetType(String))
dt.Columns.Add("Video", GetType(String))
dt.Columns.Add("Form", GetType(String))
dt.Columns.Add("RAM", GetType(String))
dt.Columns.Add("VRAM", GetType(String))
dt.Columns.Add("HD", GetType(String))
dt.Columns.Add("Wireless", GetType(Boolean))
End Sub
Private Sub FillDataTable()
'ReadAllLines returns an array of the lines in a text file
'inventory.txt is stored in the bin\Debug folder of your project
'This is the current directory so it does not require a full path.
Dim lines = File.ReadAllLines("inventory.txt")
'Now it is easy to split each line into fields by using the comma
For Each line As String In lines
'Split returns an array of strings with the value of each field
Dim items = line.Split(","c)
'Each item in the array can be added as a field to the DataTable row
dt.Rows.Add(items(0), items(1), items(2), items(3), items(4), items(5), items(6), CBool(items(7)))
'Notice that the last element is changed from a string to a boolean. This is
'the Wireless field which is bound to the check box. The string "True" or "False" is
'changed to a Boolean so it can be used as the .Checked property (see bindings)
Next
End Sub
Private Sub AddDataBindings()
'Create a new instance of the BindingSource class
bs = New BindingSource()
'Set the DataSource to the DataTable we just filled
bs.DataSource = dt
'Now you can set the bindings of each control
'The .Add method takes (Name of Property to Bind, the BindingSource to use, The Field name
'from the DataTable.
txtForm.DataBindings.Add("Text", bs, "Form")
txtHd.DataBindings.Add("Text", bs, "HD")
txtManufacturer.DataBindings.Add("Text", bs, "Manufacturer")
txtProcessor.DataBindings.Add("Text", bs, "Processor")
txtRam.DataBindings.Add("Text", bs, "RAM")
txtVideo.DataBindings.Add("Text", bs, "Video")
txtVram.DataBindings.Add("Text", bs, "VRAM")
'Notice on the CheckBox we are using the Checked property.
chkWireless.DataBindings.Add("Checked", bs, "Wireless")
End Sub
#End Region
Private Sub btnAdd_Click(sender As Object, e As EventArgs) Handles btnAdd.Click
'Add a blank row to the DataTable
'A Boolean is like a number, a String can be Nothing but a Boolean must
'have a value so we pass in False.
dt.Rows.Add(Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, False)
'Find the position of the last row
Dim i As Integer = bs.Count - 1
'Move to the new empty row
bs.Position = i
End Sub
#Region "Navigation Code"
Private Sub btnPrevious_Click(sender As Object, e As EventArgs) Handles btnPrevious.Click
'The binding source Position determins where in the data you are
'It starts at zero
If bs.Position = 0 Then
MessageBox.Show("This is the first item.")
Return 'This exits the sub, you can use Exit Sub in vb
'but Return is common in other languages so it is good to learn
Else
'As the position of the BindingSource changes the boud TextBoxes
'change their data.
bs.Position = bs.Position - 1
End If
End Sub
Private Sub btnNext_Click(sender As Object, e As EventArgs) Handles btnNext.Click
' If you are not at the end of the list, move to the next item
' in the BindingSource.
If bs.Position + 1 < bs.Count Then
bs.MoveNext()
' Otherwise, move back to the first item.
Else
bs.MoveFirst()
End If
End Sub
#End Region
#Region "Save the Data"
Private Sub SaveDataTable()
'Resave the whole file if this was a real app you would use a database
Dim sb As New StringBuilder
'A string builder keeps the code from creating lots of new strings
'Strings are immutable (can't be changed) so every time you think you are
'changing a string, you are actually creating a new one.
'The string builder is mutable (changable)
For Each row As DataRow In dt.Rows
'The ItemsArray returns an array of objects containing all the
'values in each column of the data table.
Dim rowValues = row.ItemArray
'This is a bit of Linq magic that turns the values (objects) into strings
'Underneath it is performing a For loop on each object in the array
Dim strRowValues = From o In rowValues
Select Convert.ToString(o)
'Now that we have strings we can use the String.Join with the comma
'to get the format of the text file
sb.AppendLine(String.Join(",", strRowValues))
Next
'Finally we change the StringBuilder to a real String
'The inventory.txt is stored in the bin\Debug directory so it is current directory
'no additional path required
File.WriteAllText("inventory.txt", sb.ToString)
End Sub
Private Sub Form5_FormClosing(sender As Object, e As FormClosingEventArgs) Handles MyBase.FormClosing
'Because our binding is two-way any additions or changes to the text
'in the text boxes or check box are reflected in the DataTable.
SaveDataTable()
End Sub
#End Region
End Class
Once you remove the comments, there is really very little code here. The #Region...#End Region tags make it easy to collapse code sections you are not working on and find areas quickly.
On every DataGridView1_SelectionChanged event I need to run a Private Sub OnSelectionChanged() of the form that is loaded into Panel1 (see the image http://tinypic.com/r/2nu2wx/8).
Every form that can be loaded into Panel1 has the same Private Sub OnSelectionChanged() that initiates all the necessary calculations. For instance, I can load a form that calculates temperatures or I can load a form that calculates voltages. If different element is selected in the main form’s DataGridView1, either temperatures or voltages should be recalculated.
The problem is - there are many forms that can be loaded into Panel1, and I’m struggling to raise an event that would fire only once and would run the necessary Sub only in the loaded form.
Currently I’m using Shared Event:
'Main form (Form1).
Shared Event event_UpdateLoadedForm(ByVal frm_name As String)
'This is how I load forms into a panel (in this case frm_SCT).
Private Sub mnu_SCT_Click(sender As Object, e As EventArgs) Handles mnu_SCT.Click
frm_SCT.TopLevel = False
frm_SCT.Dock = DockStyle.Fill
Panel1.Controls.Add(frm_SCT)
frm_SCT.Show()
Var._loadedForm = frm_SCT.Name
RaiseEvent event_UpdateLoadedForm(Var._loadedForm)
End Sub
‘Form that is loaded into panel (Form2 or Form3 or Form4...).
Private WithEvents myEvent As New Form1
Private Sub OnEvent(ByVal frm_name As String) Handles myEvent.event_UpdateLoadedForm
‘Avoid executing code for the form that is not loaded.
If frm_name <> Me.Name Then Exit Sub
End Sub
This approach is working but I’m sure it can be done way better (I'd be thankful for any suggestions). I have tried to raise an event in the main form like this:
Public Event MyEvent As EventHandler
Protected Overridable Sub OnChange(e As EventArgs)
RaiseEvent MyEvent(Me, e)
End Sub
Private Sub DataGridView1_SelectionChanged(sender As Object, e As EventArgs) _
Handles DataGridView1.SelectionChanged
OnChange(EventArgs.Empty)
End Sub
but I don't know to subscribe to it in the loaded form.
Thank you.
Taking into account Hans Passant’s comments as well as code he posted in related thread I achieved what I wanted (see the code below).
Public Interface IOnEvent
Sub OnSelectionChange()
End Interface
Public Class Form1
' ???
Private myInterface As IOnEvent = Nothing
' Create and load form.
Private Sub DisplayForm(frm_Name As String)
' Exit if the form is already displayed.
If Panel1.Controls.Count > 0 AndAlso _
Panel1.Controls(0).GetType().Name = frm_Name Then Exit Sub
' Dispose previous form.
Do While Panel1.Controls.Count > 0
Panel1.Controls(0).Dispose()
Loop
' Create form by its full name.
Dim T As Type = Type.GetType("Namespace." & frm_Name)
Dim frm As Form = CType(Activator.CreateInstance(T), Form)
' Load form into the panel.
frm.TopLevel = False
frm.Visible = True
frm.Dock = DockStyle.Fill
Panel1.Controls.Add(frm)
' ???
myInterface = DirectCast(frm, IOnEvent)
End Sub
Private Sub DataGridView1_SelectionChanged(sender As Object, e As EventArgs) _
Handles DataGridView1.SelectionChanged
' Avoid error if the panel is empty.
If myInterface Is Nothing Then Return
' Run subroutine in the loaded form.
myInterface.OnSelectionChange()
End Sub
End Class
One last thing – it would be great if someone could take a quick look at the code (it works) and confirm that it is ok, especially the lines marked with “???” (I don’t understand them yet).
Ok so here's the relevant code:
Public Shared compSelect(9) As ComboBox
Public Shared compPercent(9) As TextBox
Private Sub MainForm_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Data.LoadComponents("C:/Users/Jon/Documents/Visual Studio 2013/Projects/QuickBlend/QuickBlend/QuickBlend/Resources/databaseText.txt")
MsgBox("finished loading")
MainForm.compSelect = {CompSelect1, CompSelect2, CompSelect3, CompSelect4, CompSelect5, CompSelect6, CompSelect7, CompSelect8, CompSelect9, CompSelect10}
MainForm.compPercent = {CompPercent1, CompPercent2, CompPercent3, CompPercent4, CompPercent5, CompPercent6, CompPercent7, CompPercent8, CompPercent9, CompPercent10}
For Each box As ComboBox In MainForm.compSelect
box.DataSource = Data.Components
box.DisplayMember = "Name"
For Each comp As String In Data.ComponentNames
box.Items.Add(comp)
Next
MsgBox("looped")
Next
MsgBox("finished loop")
End Sub
As you can see, I've placed various MsgBoxes to see exactly whats going on. It never displays the "looped" message box. Can anybody explain to me why it's completely skipping the for loop? Been working on this for a while and got fed up with it. Thanks in advance for the help! =)
MainForm.compSelect should be Me.compSelect since this is the instance(has been filled with comboboxes) and not just the fully qualified name of the object that has not been filled.
Your problem is that you are setting the datasource for the comboBox, and then trying to add items to it. .NET does not like this, and will just exit the Sub that tries to do this, without warning (unless you have exception handling added in). Your code should be...
Public Shared compSelect(9) As ComboBox
Public Shared compPercent(9) As TextBox
Private Sub MainForm_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Data.LoadComponents("C:/Users/Jon/Documents/Visual Studio 2013/Projects/QuickBlend/QuickBlend/QuickBlend/Resources/databaseText.txt")
MsgBox("finished loading")
MainForm.compSelect = {CompSelect1, CompSelect2, CompSelect3, CompSelect4, CompSelect5, CompSelect6, CompSelect7, CompSelect8, CompSelect9, CompSelect10}
MainForm.compPercent = {CompPercent1, CompPercent2, CompPercent3, CompPercent4, CompPercent5, CompPercent6, CompPercent7, CompPercent8, CompPercent9, CompPercent10}
For Each box As ComboBox In MainForm.compSelect
box.DataSource = Data.Components
box.DisplayMember = "Name"
'take this stuff out, it is not needed
'For Each comp As String In Data.ComponentNames
'box.Items.Add(comp)
'Next
MsgBox("looped")
Next
MsgBox("finished loop")
End Sub
I'm migrating an application from VB6 to VB.Net and I found a change in the behavior of the ListBox and I'm not sure of how to make it equal to VB6.
The problem is this:
In the VB6 app, when the ListBox is focused and I type into it, the list selects the element that matches what I type. e.g. If the list contains a list of countries and I type "ita", "Italy" will be selected in the listbox.
The problem is that with the .Net version of the control if I type "ita" it will select the first element that starts with i, then the first element that starts with "t" and finally the first element that starts with "a".
So, any idea on how to get the original behavior? (I'm thinking in some property that I'm not seeing by some reason or something like that)
I really don't want to write an event handler for this (which btw, wouldn't be trivial).
Thanks a lot!
I shared willw's frustration. This is what I came up with. Add a class called ListBoxTypeAhead to your project and include this code. Then use this class as a control on your form. It traps keyboard input and moves the selected item they way the old VB6 listbox did. You can take out the timer if you wish. It mimics the behavior of keyboard input in Windows explorer.
Public Class ListBoxTypeAhead
Inherits ListBox
Dim Buffer As String
Dim WithEvents Timer1 As New Timer
Private Sub ListBoxTypeAhead_KeyDown(sender As Object, _
e As System.Windows.Forms.KeyEventArgs) Handles Me.KeyDown
Select Case e.KeyCode
Case Keys.A To Keys.Z, Keys.NumPad0 To Keys.NumPad9
e.SuppressKeyPress = True
Buffer &= Chr(e.KeyValue)
Me.SelectedIndex = Me.FindString(Buffer)
Timer1.Start()
Case Else
Timer1.Stop()
Buffer = ""
End Select
End Sub
Private Sub ListBoxTypeAhead_LostFocus(ByVal sender As Object, _
ByVal e As System.EventArgs) Handles Me.LostFocus
Timer1.Stop()
Buffer = ""
End Sub
Public Sub New()
Timer1.Interval = 2000
End Sub
Private Sub Timer1_Tick(sender As Object, e As System.EventArgs) Handles Timer1.Tick
Timer1.Stop()
Buffer = ""
End Sub
End Class
As you probably know, this feature is called 'type ahead,' and it's not built into the Winform ListBox (so you're not missing a property).
You can get the type-ahead functionality on the ListView control if you set its View property to List.
Public Function CheckIfExistInCombo(ByVal objCombo As Object, ByVal TextToFind As String) As Boolean
Dim NumOfItems As Object 'The Number Of Items In ComboBox
Dim IndexNum As Integer 'Index
NumOfItems = objCombo.ListCount
For IndexNum = 0 To NumOfItems - 1
If objCombo.List(IndexNum) = TextToFind Then
CheckIfExistInCombo = True
Exit Function
End If
Next IndexNum
CheckIfExistInCombo = False
End Function