Reply Inline With a Outlook Template - vba

I would like to reply to a message inline with a outlook template using a macro.
I am currently using the below code to perform the reply with a template but this opens a pop out reply window.
Sub Reply_Scripting()
Dim origEmail As MailItem
Dim replyEmail As MailItem
Set origEmail = Application.ActiveWindow.Selection.Item(1)
Set replyEmail = Application.CreateItemFromTemplate("C:\Test.oft")
replyEmail.HTMLBody = replyEmail.HTMLBody & origEmail.reply.HTMLBody
replyEmail.Display
End Sub
I have searched and found there has been similar question answered here. However, I was not able to modify the code to make it work successfully in my case.
Thanks.

I have noticed the following line of code:
replyEmail.HTMLBody = replyEmail.HTMLBody & origEmail.reply.HTMLBody
Note, you need to get a well formed HTML markup and assign it to the HTMLBody property. But it looks like you try to merge two HTML pages into a single one by adding one to another.
Instead, you need to paste the body content of the template you are loading in the code at the beginning of the body section of the existing item. I.e. right after the <body> tag.

This is what I have for an "auto reply". This DOES NOT allow editing before sending, but easily modified to do so. See comments in code.
Sub ReplyMSG()
Dim olItem As Outlook.MailItem
Dim olReply As MailItem ' Reply
For Each olItem In Application.ActiveExplorer.Selection
olItem.UnRead = False '<<----This marks the email as Read
Set olReply = olItem.ReplyAll '<<----This replies to all recipients
olReply.HTMLBody = "Insert a message or template here" & olReply.HTMLBody
olReply.Display '<<-----Use this to display the email before sending
olReply.Send '<<-----Comment this out if you want to edit before sending
Next olItem
End Sub

Related

Sending email with picture in html body

I am trying to send an email, with a chart, using VBA in Excel.
When I use .Display the email is created with that picture (chart) inside the email and it is sending.
When I sending straight away using .Send, the picture of the chart disappears from the email.
Also, I would like to better understand parameters after using:
.Attachments.Add PicFilename, 1, 1
What are the numbers "1, 1" which I took from one of the examples on website.
The Attachments.Add method is described in MSDN.
Sub AddAttachment()
Dim myItem As Outlook.MailItem
Dim myAttachments As Outlook.Attachments
Set myItem = Application.CreateItem(olMailItem)
Set myAttachments = myItem.Attachments
myAttachments.Add "C:\Test.doc", _
olByValue, 1, "Test"
myItem.Display
End Sub
Try to save the item before sending it out. Also you can use two calls sequentially if it helps:
mailItem.Display(False)
mailItem.Send()

VBA for Outlook - Change Subject Line using Right

I am trying to change incoming emails subject line to only the last 11 characters of the subject line. When I use Item.Subject = Right(Item.Subject,11) it does not work.
Can someone assist?
Full code.
Sub ChangeSubjectForward(Item As Outlook.MailItem)
Item.Subject = Right(Item.Subject, 11)
Item.Save
End Sub
You could create a macro rule then run the below code:
Sub save_to_dir_test1(mymail As MailItem)
Dim strID As String
Dim objMail As Outlook.MailItem
strID = mymail.EntryID
Set objMail = Application.Session.GetItemFromID(strID)
objMail.Subject = Right(m.Subject, 11)
objMail.Save
Set objMail = Nothing
End Sub
For more information, please refer to this link:
Run a Script Rule: Change Subject then Forward Message
Getting the incoming email in outlook via VBA
I found another SO thread that says you can't modify the subject of a message without opening it first. We can use ActiveInspector to get a handle on the Item after we display it. Then we can change it, save it, and close it. I added a check to see if the subject is actually longer than 11 characters before we attempt to truncate it.
Try this:
Public Sub ChangeSubjectForward(ByRef Item As Outlook.MailItem)
Debug.Print Now ' This shows you when the code runs
If Len(Item.Subject) > 11 Then
Debug.Print "Subject is too long. Trimming..." ' This shows that we tried to truncate.
Item.Display 'Force the pop-up
Dim thisInspector As Inspector
Set thisInspector = Application.ActiveInspector
Set Item = thisInspector.CurrentItem ' Get the handle from the Inspector
Item.Subject = Right$(Item.Subject, 11)
Item.Save
Item.Close
End If
End Sub

Outlook Email created in VBA using a template converts to plain text when saved

Below is the code that I am running in ThisOutlookSession. The code is meant to check all incoming emails and if the email is from a certain email address and contains a specific string in the subject then a new email is created from a template and the triggering email is attached and the email is then sent out to a different email address. This portion all works fine.
Also to note I am using windows 10 and office 2016.
The problem that I am having is the email is converted to plain text unless it is displayed first. The template that I have created is saved as a HTML formatted message. I have tried adding lines such as
NewMsg.BodyFormat = olFormatHTML
NewMsg.save
But this doesn't seem to work as the email that is sent was still in the plain text format. If I add the following to that the message it basically works.
NewMsg.BodyFormat = olFormatRichText
NewMsg.save
NewMsg.BodyFormat = olFormatHTML
NewMsg.save
However the above block of code removes a lot of the formatting that was saved in my template such as different fonts/ font sizes.
Am I missing something about working with templates in VBA?
Also The problem that I am having with displaying the message first is two things. The obvious one is the flash that this causes because the message is briefly displayed. The second is my default signature is also added to the displayed message but I wanted to use a custom signature that I built into my template.
Here is my full code with sensitive information removed.
Private WithEvents Items As Outlook.Items
Private Sub Application_Startup()
Dim olApp As Outlook.Application
Dim objNS As Outlook.NameSpace
Set olApp = Outlook.Application
Set objNS = olApp.GetNamespace("MAPI")
' default local Inbox
Set Items = objNS.GetDefaultFolder(olFolderInbox).Items
End Sub
Private Sub Items_ItemAdd(ByVal item As Object)
On Error GoTo ErrorHandler
Dim Msg As Outlook.MailItem
Dim NewMsg As Outlook.MailItem
If TypeName(item) = "MailItem" Then
Set Msg = item
If Msg.SenderEmailAddress <> "example#example.com" Then GoTo Skip
If InStr(1, Msg.Subject, "Specific String") > 0 Then 'checks if subject contains the proper string
Set NewMsg = Application.CreateItemFromTemplate("Template Path")
Msg.Subject = Replace(Msg.Subject, "Old Subject", "New subject")
Msg.Save
NewMsg.HTMLBody = NewMsg.HTMLBody
NewMsg.Attachments.Add Msg
NewMsg.Recipients.Add("Example#Example.com")
NewMsg.Subject = Msg.Subject
NewMsg.Save
NewMsg.Send
End If
End If
Skip:
ProgramExit:
Exit Sub
ErrorHandler:
MsgBox Err.Number & " - " & Err.Description
End Sub
Reset the HTMLBody property - that will force HTML format:
Msg.HTMLBody = Msg.HTMLBody

OutlookVBA for finding and replacing the text from original email

I am trying to run outlook VBA to find and replace text from original email to new email to bunch of stakeholders.
Finding difficulty to run the script.
Scenario, I get an email which has Company Name list. So whenever I am running this script it should replace with company name listed on the original email.
Below is my script.
Sub Test()
Dim origEmail As MailItem
Dim replyEmail As MailItem
Dim oRespond As Outlook.MailItem
Dim strcompany As String
Dim strHTML As String
Set origEmail = Application.ActiveWindow.Selection.Item(1)
Set replyEmail = Application.CreateItemFromTemplate("C:\Users\test-.oft")
strcompany = InputBox("Issue : ", "Replace %company%")
strHTML = Replace(replyEmail.HTMLBody, "Company:", strissue)
replyEmail.HTMLBody = replyEmail.HTMLBody & origEmail.Reply.HTMLBody
replyEmail.Subject = replyEmail.Subject & origEmail.Reply.Subject
replyEmail.Display
End Sub
Use Explorer.SelectionChange (use Application.ActiveExplorer) to track the selection change
Set up event handlers on the selected emails.
When MailItem.Reply event fires, you can read properties from the original message and populate the properties on the new message passed as the parameter to the event handler.
You can do the same for the messages replied to from the open inspectors (use Inspectors.NewInspector event to track the message opened in inspectors).

How to add default signature in Outlook

I am writing a VBA script in Access that creates and auto-populates a few dozen emails. It's been smooth coding so far, but I'm new to Outlook. After creating the mailitem object, how do I add the default signature to the email?
This would be the default signature that is automatically added when creating a new email.
Ideally, I'd like to just use ObjMail.GetDefaultSignature, but I can't find anything like it.
Currently, I'm using the function below (found elsewhere on the internet) and referencing the exact path & filename of the htm file. But this will be used by several people and they may have a different name for their default htm signature file. So this works, but it's not ideal:
Function GetBoiler(ByVal sFile As String) As String
'Dick Kusleika
Dim fso As Object
Dim ts As Object
Set fso = CreateObject("Scripting.FileSystemObject")
Set ts = fso.GetFile(sFile).OpenAsTextStream(1, -2)
GetBoiler = ts.readall
ts.Close
End Function
(Called with getboiler(SigString = "C:\Users\" & Environ("username") & "\AppData\Roaming\Microsoft\Signatures\Mysig.txt"))
Edit
Thanks to JP (see comments), I realize that the default signature is showing up at first, but it disappears when I use HTMLBody to add a table to the email. So I guess my question is now: How do I display the default signature and still display an html table?
Sub X()
Dim OlApp As Outlook.Application
Dim ObjMail As Outlook.MailItem
Set OlApp = Outlook.Application
Set ObjMail = OlApp.CreateItem(olMailItem)
ObjMail.BodyFormat = olFormatHTML
ObjMail.Subject = "Subject goes here"
ObjMail.Recipients.Add "Email goes here"
ObjMail.HTMLBody = ObjMail.Body & "HTML Table goes here"
ObjMail.Display
End Sub
The code below will create an outlook message & keep the auto signature
Dim OApp As Object, OMail As Object, signature As String
Set OApp = CreateObject("Outlook.Application")
Set OMail = OApp.CreateItem(0)
With OMail
.Display
End With
signature = OMail.body
With OMail
'.To = "someone#somedomain.com"
'.Subject = "Type your email subject here"
'.Attachments.Add
.body = "Add body text here" & vbNewLine & signature
'.Send
End With
Set OMail = Nothing
Set OApp = Nothing
My solution is to display an empty message first (with default signature!) and insert the intended strHTMLBody into the existing HTMLBody.
If, like PowerUser states, the signature is wiped out while editing HTMLBody you might consider storing the contents of ObjMail.HTMLBody into variable strTemp immediately after ObjMail.Display and add strTemp afterwards but that should not be necessary.
Sub X(strTo as string, strSubject as string, strHTMLBody as string)
Dim OlApp As Outlook.Application
Dim ObjMail As Outlook.MailItem
Set OlApp = Outlook.Application
Set ObjMail = OlApp.CreateItem(olMailItem)
ObjMail.To = strTo
ObjMail.Subject = strSubject
ObjMail.Display
'You now have the default signature within ObjMail.HTMLBody.
'Add this after adding strHTMLBody
ObjMail.HTMLBody = strHTMLBody & ObjMail.HTMLBody
'ObjMail.Send 'send immediately or
'ObjMail.close olSave 'save as draft
'Set OlApp = Nothing
End sub
Dim OutApp As Object, OutMail As Object, LogFile As String
Dim cell As Range, S As String, WMBody As String, lFile As Long
S = Environ("appdata") & "\Microsoft\Signatures\"
If Dir(S, vbDirectory) <> vbNullString Then S = S & Dir$(S & "*.htm") Else S = ""
S = CreateObject("Scripting.FileSystemObject").GetFile(S).OpenAsTextStream(1, -2).ReadAll
WMBody = "<br>Hi All,<br><br>" & _
"Last line,<br><br>" & S 'Add the Signature to end of HTML Body
Just thought I'd share how I achieve this. Not too sure if it's correct in the defining variables sense but it's small and easy to read which is what I like.
I attach WMBody to .HTMLBody within the object Outlook.Application OLE.
Hope it helps someone.
Thanks,
Wes.
I figured out a way, but it may be too sloppy for most. I've got a simple Db and I want it to be able to generate emails for me, so here's the down and dirty solution I used:
I found that the beginning of the body text is the only place I see the "<div class=WordSection1>" in the HTMLBody of a new email, so I just did a simple replace, replacing
"<div class=WordSection1><p class=MsoNormal><o:p>"
with
"<div class=WordSection1><p class=MsoNormal><o:p>" & sBody
where sBody is the body content I want inserted. Seems to work so far.
.HTMLBody = Replace(oEmail.HTMLBody, "<div class=WordSection1><p class=MsoNormal><o:p>", "<div class=WordSection1><p class=MsoNormal><o:p>" & sBody)
I constructed this approach while looking for how to send a message on a recurring schedule.
I found the approach where you reference the Inspector property of the created message did not add the signature I wanted (I have more than one account set up in Outlook, with separate signatures.)
The approach below is fairly flexible and still simple.
Private Sub Add_Signature(ByVal addy as String, ByVal subj as String, ByVal body as String)
Dim oMsg As MailItem
Set oMsg = Application.CreateItem(olMailItem)
oMsg.To = addy
oMsg.Subject = subj
oMsg.Body = body
Dim sig As String
' Mysig is the name you gave your signature in the OL Options dialog
sig = ReadSignature("Mysig.htm")
oMsg.HTMLBody = Item.Body & "<p><BR/><BR/></p>" & sig ' oMsg.HTMLBody
oMsg.Send
Set oMsg = Nothing
End Sub
Private Function ReadSignature(sigName As String) As String
Dim oFSO, oTextStream, oSig As Object
Dim appDataDir, sig, sigPath, fileName As String
appDataDir = Environ("APPDATA") & "\Microsoft\Signatures"
sigPath = appDataDir & "\" & sigName
Set oFSO = CreateObject("Scripting.FileSystemObject")
Set oTextStream = oFSO.OpenTextFile(sigPath)
sig = oTextStream.ReadAll
' fix relative references to images, etc. in sig
' by making them absolute paths, OL will find the image
fileName = Replace(sigName, ".htm", "") & "_files/"
sig = Replace(sig, fileName, appDataDir & "\" & fileName)
ReadSignature = sig
End Function
I have made this a Community Wiki answer because I could not have created it without PowerUser's research and the help in earlier comments.
I took PowerUser's Sub X and added
Debug.Print "n------" 'with different values for n
Debug.Print ObjMail.HTMLBody
after every statement. From this I discovered the signature is not within .HTMLBody until after ObjMail.Display and then only if I haven't added anything to the body.
I went back to PowerUser's earlier solution that used C:\Users\" & Environ("username") & "\AppData\Roaming\Microsoft\Signatures\Mysig.txt"). PowerUser was unhappy with this because he wanted his solution to work for others who would have different signatures.
My signature is in the same folder and I cannot find any option to change this folder. I have only one signature so by reading the only HTM file in this folder, I obtained my only/default signature.
I created an HTML table and inserted it into the signature immediately following the <body> element and set the html body to the result. I sent the email to myself and the result was perfectly acceptable providing you like my formatting which I included to check that I could.
My modified subroutine is:
Sub X()
Dim OlApp As Outlook.Application
Dim ObjMail As Outlook.MailItem
Dim BodyHtml As String
Dim DirSig As String
Dim FileNameHTMSig As String
Dim Pos1 As Long
Dim Pos2 As Long
Dim SigHtm As String
DirSig = "C:\Users\" & Environ("username") & _
"\AppData\Roaming\Microsoft\Signatures"
FileNameHTMSig = Dir$(DirSig & "\*.htm")
' Code to handle there being no htm signature or there being more than one
SigHtm = GetBoiler(DirSig & "\" & FileNameHTMSig)
Pos1 = InStr(1, LCase(SigHtm), "<body")
' Code to handle there being no body
Pos2 = InStr(Pos1, LCase(SigHtm), ">")
' Code to handle there being no closing > for the body element
BodyHtml = "<table border=0 width=""100%"" style=""Color: #0000FF""" & _
" bgColor=#F0F0F0><tr><td align= ""center"">HTML table</td>" & _
"</tr></table><br>"
BodyHtml = Mid(SigHtm, 1, Pos2 + 1) & BodyHtml & Mid(SigHtm, Pos2 + 2)
Set OlApp = Outlook.Application
Set ObjMail = OlApp.CreateItem(olMailItem)
ObjMail.BodyFormat = olFormatHTML
ObjMail.Subject = "Subject goes here"
ObjMail.Recipients.Add "my email address"
ObjMail.Display
End Sub
Since both PowerUser and I have found our signatures in C:\Users\" & Environ("username") & "\AppData\Roaming\Microsoft\Signatures I suggest this is the standard location for any Outlook installation. Can this default be changed? I cannot find anything to suggest it can. The above code clearly needs some development but it does achieve PowerUser's objective of creating an email body containing an HTML table above a signature.
I need 50 rep to post a comment against the Signature Option I found most helpful, however I had an issue with images not showing correctly so I had to find a work around. This is my solution:
Using #Morris Maynard's answer as a base https://stackoverflow.com/a/18455148/2337102 I then had to go through the following:
Notes:
Back up your .htm file before starting, copy & paste to a secondary folder
You will be working with both the SignatureName.htm and the SignatureName_files Folder
You do not need HTML experience, the files will open in an editing program such as Notepad or Notepad++ or your specified HTML Program
Navigate to your Signature File location (standard should be C:\Users\"username"\AppData\Roaming\Microsoft\Signatures)
Open the SignatureName.htm file in a text/htm editor (right click on the file, "Edit with Program")
Use Ctrl+F and enter .png; .jpg or if you don't know your image type, use image001
You will see something like: src="signaturename_files/image001.png"
You need to change that to the whole address of the image location
C:\Users\YourName\AppData\Roaming\Microsoft\Signatures\SignatureNameFolder_files\image001
or
src="E:\location\Signatures\SignatureNameFolder_files\image001.png"
Save your file (overwrite it, you had of course backed up the original)
Return to Outlook and Open New Mail Item, add your signature. I received a warning that the files had been changed, I clicked ok, I needed to do this twice, then once in the "Edit Signatures Menu".
Some of the files in this webpage aren't in the expected location. Do you want to download them anyway? If you're sure the Web page is from a trusted source, click Yes."
Run your Macro event, the images should now be showing.
Credit
MrExcel - VBA code signature code failure: http://bit.ly/1gap9jY
Most of the other answers are simply concatenating their HTML body with the HTML signature. However, this does not work with images, and it turns out there is a more "standard" way of doing this.1
Microsoft Outlook pre-2007 which is configured with WordEditor as its editor, and Microsoft Outlook 2007 and beyond, use a slightly cut-down version of the Word Editor to edit emails. This means we can use the Microsoft Word Document Object Model to make changes to the email.
Set objMsg = Application.CreateItem(olMailItem)
objMsg.GetInspector.Display 'Displaying an empty email will populate the default signature
Set objSigDoc = objMsg.GetInspector.WordEditor
Set objSel = objSigDoc.Windows(1).Selection
With objSel
.Collapse wdCollapseStart
.MoveEnd WdUnits.wdStory, 1
.Copy 'This will copy the signature
End With
objMsg.HTMLBody = "<p>OUR HTML STUFF HERE</p>"
With objSel
.Move WdUnits.wdStory, 1 'Move to the end of our new message
.PasteAndFormat wdFormatOriginalFormatting 'Paste the copied signature
End With
'I am not a VB programmer, wrote this originally in another language so if it does not
'compile it is because this is my first VB method :P
Microsoft Outlook 2007 Programming (S. Mosher)> Chapter 17, Working with Item Bodies: Working with Outlook Signatures
I like Mozzi's answer but found that it did not retain the default fonts that are user specific. The text all appeared in a system font as normal text. The code below retains the user's favourite fonts, while making it only a little longer. It is based on Mozzi's approach, uses a regular expression to replace the default body text and places the user's chosen Body text where it belongs by using GetInspector.WordEditor. I found that the call to GetInspector did not populate the HTMLbody as dimitry streblechenko says above in this thread, at least, not in Office 2010, so the object is still displayed in my code. In passing, please note that it is important that the MailItem is created as an Object, not as a straightforward MailItem - see here for more. (Oh, and sorry to those of different tastes, but I prefer longer descriptive variable names so that I can find routines!)
Public Function GetSignedMailItemAsObject(ByVal ToAddress As String, _
ByVal Subject As String, _
ByVal Body As String, _
SignatureName As String) As Object
'================================================================================================================='Creates a new MailItem in HTML format as an Object.
'Body, if provided, replaces all text in the default message.
'A Signature is appended at the end of the message.
'If SignatureName is invalid any existing default signature is left in place.
'=================================================================================================================
' REQUIRED REFERENCES
' VBScript regular expressions (5.5)
' Microsoft Scripting Runtime
'=================================================================================================================
Dim OlM As Object 'Do not define this as Outlook.MailItem. If you do, some things will work and some won't (i.e. SendUsingAccount)
Dim Signature As String
Dim Doc As Word.Document
Dim Regex As New VBScript_RegExp_55.RegExp '(can also use use Object if VBScript is not Referenced)
Set OlM = Application.CreateItem(olMailItem)
With OlM
.To = ToAddress
.Subject = Subject
'SignatureName is the exactname that you gave your signature in the Message>Insert>Signature Dialog
Signature = GetSignature(SignatureName)
If Signature <> vbNullString Then
' Should really strip the terminal </body tag out of signature by removing all characters from the start of the tag
' but Outlook seems to handle this OK if you don't bother.
.Display 'Needed. Without it, there is no existing HTMLbody available to work with.
Set Doc = OlM.GetInspector.WordEditor 'Get any existing body with the WordEditor and delete all of it
Doc.Range(Doc.Content.Start, Doc.Content.End) = vbNullString 'Delete all existing content - we don't want any default signature
'Preserve all local email formatting by placing any new body text, followed by the Signature, into the empty HTMLbody.
With Regex
.IgnoreCase = True 'Case insensitive
.Global = False 'Regex finds only the first match
.MultiLine = True 'In case there are stray EndOfLines (there shouldn't be in HTML but Word exports of HTML can be dire)
.Pattern = "(<body.*)(?=<\/body)" 'Look for the whole HTMLbody but do NOT include the terminal </body tag in the value returned
OlM.HTMLbody = .Replace(OlM.HTMLbody, "$1" & Signature)
End With ' Regex
Doc.Range(Doc.Content.Start, Doc.Content.Start) = Body 'Place the required Body before the signature (it will get the default style)
.Close olSave 'Close the Displayed MailItem (actually Object) and Save it. If it is left open some later updates may fail.
End If ' Signature <> vbNullString
End With ' OlM
Set GetSignedMailItemAsObject = OlM
End Function
Private Function GetSignature(sigName As String) As String
Dim oTextStream As Scripting.TextStream
Dim oSig As Object
Dim appDataDir, Signature, sigPath, fileName As String
Dim FileSys As Scripting.FileSystemObject 'Requires Microsoft Scripting Runtime to be available
appDataDir = Environ("APPDATA") & "\Microsoft\Signatures"
sigPath = appDataDir & "\" & sigName & ".htm"
Set FileSys = CreateObject("Scripting.FileSystemObject")
Set oTextStream = FileSys.OpenTextFile(sigPath)
Signature = oTextStream.ReadAll
' fix relative references to images, etc. in Signature
' by making them absolute paths, OL will find the image
fileName = Replace(sigName, ".htm", "") & "_files/"
Signature = Replace(Signature, fileName, appDataDir & "\" & fileName)
GetSignature = Signature
End Function
The existing answers had a few problems for me:
I needed to insert text (e.g. 'Good Day John Doe') with html formatting where you would normally type your message.
At least on my machine, Outlook adds 2 blank lines above the signature where you should start typing. These should obviously be removed (replaced with custom HTML).
The code below does the job. Please note the following:
The 'From' parameter allows you to choose the account (since there could be different default signatures for different email accounts)
The 'Recipients' parameter expects an array of emails, and it will 'Resolve' the added email (i.e. find it in contacts, as if you had typed it in the 'To' box)
Late binding is used, so no references are required
'Opens an outlook email with the provided email body and default signature
'Parameters:
' from: Email address of Account to send from. Wildcards are supported e.g. *#example.com
' recipients: Array of recipients. Recipient can be a Contact name or email address
' subject: Email subject
' htmlBody: Html formatted body to insert before signature (just body markup, should not contain html, head or body tags)
Public Sub CreateMail(from As String, recipients, subject As String, htmlBody As String)
Dim oApp, oAcc As Object
Set oApp = CreateObject("Outlook.application")
With oApp.CreateItem(0) 'olMailItem = 0
'Ensure we are sending with the correct account (to insert the correct signature)
'oAcc is of type Outlook.Account, which has other properties that could be filtered with if required
'SmtpAddress is usually equal to the raw email address
.SendUsingAccount = Nothing
For Each oAcc In oApp.Session.Accounts
If CStr(oAcc.SmtpAddress) = from Or CStr(oAcc.SmtpAddress) Like from Then
Set .SendUsingAccount = oAcc
End If
Next oAcc
If .SendUsingAccount Is Nothing Then Err.Raise -1, , "Unknown email account " & from
For Each addr In recipients
With .recipients.Add(addr)
'This will resolve the recipient as if you had typed the name/email and pressed Tab/Enter
.Resolve
End With
Next addr
.subject = subject
.Display 'HTMLBody is only populated after this line
'Remove blank lines at the top of the body
.htmlBody = Replace(.htmlBody, "<o:p> </o:p>", "")
'Insert the html at the start of the 'body' tag
Dim bodyTagEnd As Long: bodyTagEnd = InStr(InStr(1, .htmlBody, "<body"), .htmlBody, ">")
.htmlBody = Left(.htmlBody, bodyTagEnd) & htmlBody & Right(.htmlBody, Len(.htmlBody) - bodyTagEnd)
End With
Set oApp = Nothing
End Sub
Use as follows:
CreateMail from:="*#contoso.com", _
recipients:= Array("john.doe#contoso.com", "Jane Doe", "unknown#example.com"), _
subject:= "Test Email", _
htmlBody:= "<p>Good Day All</p><p>Hello <b>World!</b></p>"
Result:
Often this question is asked in the context of Ron de Bruin's RangeToHTML function, which creates an HTML PublishObject from an Excel.Range, extracts that via FSO, and inserts the resulting stream HTML in to the email's HTMLBody. In doing so, this removes the default signature (the RangeToHTML function has a helper function GetBoiler which attempts to insert the default signature).
Unfortunately, the poorly-documented Application.CommandBars method is not available via Outlook:
wdDoc.Application.CommandBars.ExecuteMso "PasteExcelTableSourceFormatting"
It will raise a runtime 6158:
But we can still leverage the Word.Document which is accessible via the MailItem.GetInspector method, we can do something like this to copy & paste the selection from Excel to the Outlook email body, preserving your default signature (if there is one).
Dim rng as Range
Set rng = Range("A1:F10") 'Modify as needed
With OutMail
.To = "xxxxx#xxxxx.com"
.BCC = ""
.Subject = "Subject"
.Display
Dim wdDoc As Object '## Word.Document
Dim wdRange As Object '## Word.Range
Set wdDoc = OutMail.GetInspector.WordEditor
Set wdRange = wdDoc.Range(0, 0)
wdRange.InsertAfter vbCrLf & vbCrLf
'Copy the range in-place
rng.Copy
wdRange.Paste
End With
Note that in some cases this may not perfectly preserve the column widths or in some instances the row heights, and while it will also copy shapes and other objects in the Excel range, this may also cause some funky alignment issues, but for simple tables and Excel ranges, it is very good:
Need to add a reference to Microsoft.Outlook. it is in Project references, from the visual basic window top menu.
Private Sub sendemail_Click()
Dim OutlookApp As Outlook.Application
Dim OutlookMail As Outlook.MailItem
Set OutlookApp = New Outlook.Application
Set OutlookMail = OutlookApp.CreateItem(olMailItem)
With OutlookMail
.Display
.To = email
.Subject = "subject"
Dim wdDoc As Object ' Word.Document
Dim wdRange As Object ' Word.Range
Set wdDoc = .GetInspector.WordEditor
Set wdRange = wdDoc.Range(0, 0) ' Create Range at character position 0 with length of 0 character s.
' if you need rtl:
wdRange.Paragraphs.ReadingOrder = 0 ' 0 is rtl , 1 is ltr
wdRange.InsertAfter "mytext"
End With
End Sub
Assuming that your signature has this line "Thank you."
Now all you need to do is to replace "Thank you." with whatever you want. Note: This is case sensitive so you must use the exact case. "Thank you" is not as "Thank You"
myMail.HTMLBody = Replace(myMail.HTMLBody, "Thank you.", "Please find attached the file you needed. Thank You.")
Here's the full code:
Sub Emailer()
'Assumes your signature has this line: "Thank you."
Set outlookApp = New Outlook.Application
Set myMail = outlookApp.CreateItem(olMailItem)
myMail.To = "x#x.com"
myMail.Subject = "Hello"
myMail.Display
myMail.HTMLBody = Replace(myMail.HTMLBody, "Thank you.", "Please find attached the file you needed. Thank You.")
'myMail.Send
End Sub
Outlook adds the signature to the new unmodified messages (you should not modify the body prior to that) when you call MailItem.Display (which causes the message to be displayed on the screen) or when you access the MailItem.GetInspector property (in the older versions of Outlook prior to 2016) - you do not have to do anything with the returned Inspector object, but Outlook will populate the message body with the signature.
Once the signature is added, read the HTMLBody property and merge it with the HTML string that you are trying to set. Note that you cannot simply concatenate 2 HTML strings - the strings need to be merged. E.g. if you want to insert your string at the top of the HTML body, look for the "<body" substring, then find the next occurrence of ">" (this takes care of the <body> element with attributes), then insert your HTML string after that ">".
Outlook Object Model does not expose signatures at all.
On a general note, the name of the signature is stored in the account profile data accessible through the IOlkAccountManager Extended MAPI interface. Since that interface is Extended MAPI, it can only be accessed using C++ or Delphi. You can see the interface and its data in OutlookSpy (I am its author) if you click the IOlkAccountManager button.
Once you have the signature name, you can read the HTML file from the file system (keep in mind that the folder name (Signatures in English) is localized.
Also keep in mind that if the signature contains images, they must also be added to the message as attachments and the <img> tags in the signature/message body adjusted to point the src attribute to the attachments rather than a subfolder of the Signatures folder where the images are stored.
It will also be your responsibility to merge the HTML styles from the signature HTML file with the styles of the message itself.
If using Redemption (I am its author) is an option, you can use its RDOAccount object - it exposes ReplySignature and NewMessageSignature properties.
Redemption also exposes RDOSignature.ApplyTo method that takes a pointer to the RDOMail object and inserts the signature at the specified location correctly merging the images and the styles:
set Session = CreateObject("Redemption.RDOSession")
Session.MAPIOBJECT = Application.Session.MAPIOBJECT
set Drafts = Session.GetDefaultFolder(olFolderDrafts)
set Msg = Drafts.Items.Add
Msg.To = "user#domain.demo"
Msg.Subject = "testing signatures"
Msg.HTMLBody = "<html><body>some <b>bold</b> message text</body></html>"
set Account = Session.Accounts.GetOrder(2).Item(1) 'first mail account
if Not (Account Is Nothing) Then
set Signature = Account.NewMessageSignature
if Not (Signature Is Nothing) Then
Signature.ApplyTo Msg, false 'apply at the bottom
End If
End If
Msg.Send
Previously MailItem.GetInspector was a valid replacement for MailItem.Display.
This solution was lost. "Outlook adds the signature to the new unmodified messages (you should not modify the body prior to that) when you call MailItem.Display (which causes the message to be displayed on the screen) or when you access the MailItem.GetInspector property (in the older versions of Outlook prior to 2016) - you do not have to do anything with the returned Inspector object, but Outlook will populate the message body with the signature."
.GetInspector can be implemented differently:
Option Explicit
Sub GenerateSignatureWithoutDisplay()
Dim objOutlook As Outlook.Application
Dim objMail As Outlook.mailItem
Set objOutlook = Outlook.Application
Set objMail = objOutlook.CreateItem(olMailItem)
With objMail
.subject = "Test email to generate signature without .Display"
' To get the signature
' .GetInspector ' Previously a direct replacement for .Display
' Later this no longer generated the signature.
' No error so solution assumed to be lost.
' 2022-06-22 Compile error: Invalid use of property
' 2022-06-22 Germ of the idea seen here
' https://stackoverflow.com/questions/72692114
' Dim signature As Variant ' The lucky trick to declare as Variant
' signature = .GetInspector
' signature = .HtmlBody
' .HtmlBody = "Input variable information here" & "<br><br>" & signature
' After review of the documentation
' https://learn.microsoft.com/en-us/office/vba/api/outlook.mailitem.getinspector
Dim myInspector As Outlook.Inspector
Set myInspector = .GetInspector
.HtmlBody = "Input variable information here" & "<br><br>" & .HtmlBody
.Close olSave
End With
' To verify after the save the signature is in saved mail
'objMail.Display
End Sub