I have been trying to install tensorflow-gpu on windows 10, via
pip3 install --upgrade tensorflow-gpu
When I do this I break the current installation of ordinary tensorflow!, and get this error: On Windows, running "import tensorflow" generates No module named "_pywrap_tensorflow" error.
Somehow I manage to fix this by re-installing ordinary tensorflow, but then when I import tensorflow in python 3.5.2 and try to identify my GPU, No device is found!
I have a Cuda 9.0 installed alongside cudnn64_6 defined as a DLL in CUDA/v9.0/bin, and I can run the nbody test program without problems and I can see the GPU being used for that demo application.
Is there any known issue with tensorflow-gpu 1.3.0?
Really struggling on this. Why does it have to be so problematic installing this library!
Please help
mg
TensorFlow 1.3 (and 1.4) require CUDA 8.0 and do not support later versions. You will either need to downgrade CUDA to 8.0 or make a custom build from source.
Related
updated code to work with tensorflow 2.4 to get around issue
I'm trying to install Tensorflow 1.9 on a Raspberry Pi as it is a requirement of the code I want to run. It installs fine on my Macbook using pip install tensorflow==1.9.0, but on the Pi I get the error:
Could not find a version that satisfies the requirement tensorflow==1.9.0 (from versions: 0.11.0, 1.11.0, 1.12.0, 1.13.1, 1.14.0)
No matching distribution found for tensorflow==1.9.0
I'm using a Conda (miniconda3) environment with Python 3.6.
Would using Ubuntu Desktop instead of Raspberry Pi OS work maybe? Or is there perhaps a way to build it from https://github.com/tensorflow/tensorflow/tree/r1.9?
You need to install python version 3.6 or other compatible versions in conda. Tensorflow does not work on versions higher than 3.8 and has identified issues with some other versions. I recommend using python 3.6 through conda. You will also probably need to move the
libcrypto-1_1-x64.dll
libssl-1_1-x64.dll
files from anaconda3\Library\bin to anaconda3/DLLs. You can find more details about this issue if you run into it here.
Hope this answers your question!
To install Tensorflow on Raspberry Pi run:
sudo apt install libatlas-base-dev
and then
pip3 install tensorflow
You can also compilte TensorflowLite and use if you wish. The compile TensorflowLite on RPi refer this link
When I try to install tensorflow on python 3.9 I get following error:
ERROR: Could not find a version that satisfies the requirement tensorflow (from versions: none)
ERROR: No matching distribution found for tensorflow
Is not there any tensorflow for 3.9?
What do you guys recommend?
Can I install other version of python beside the existing version?
Right now tensorflow does not have a build for python3.9
The latest one is for python3.8
You can check the build files at PyPI
https://pypi.org/project/tensorflow/#files
yes, you can install another version of python.
The original poster did not mention what type of computer or operating system he was using while attempting to install TensorFlow alongside Python 3.9. The error could be linked to working on a 64-bit Mac with the M1 chip (I recently experienced the same error described above while working on a Mac M1 in a Miniconda environment with Python 3.9.13). I solved the error by running
python3 -m pip install tensorflow-macos
from Terminal (in the Miniconda environment). TensorFlow installed normally alongside Python 3.9.13.
I do recommend installing Miniconda (or Anaconda as others have suggested), because it will allow you to easily create development environments with whatever version of Python modules or dependencies you require at the moment. See https://docs.conda.io/en/latest/miniconda.html. The larger Anaconda comes with a user-friendly 'Navigator' GUI which enables you to choose which environment is used to open a Jupyter notebook or other development environment, several of which come with Anaconda. See https://docs.anaconda.com/anaconda/install/
This is terrible with newer versions of Python that are not compatible with the machine learning module package.
So my approach is to keep the existing version 3.9 and the computer is using Anaconda to install a virtual environment with 3.7. When using vscode or pycharm, just remember to set it to that 3.7 Python environment.
I have installed both tensorflow 2.2.0 and tensorflow 1.15.0(by pip install tensorflow-gpu==1.15.0). The tensorflow 2 is installed in the base environment of Anaconda 3, while the tensorflow 1 is installed in a separate environment.
The tensorflow 2.2.0 can recognize gpu based on a simple test:
if tf.test.gpu_device_name():
print('Default GPU Device: {}'.format(tf.test.gpu_device_name()))
//output: Default GPU Device: /device:GPU:0
But the tensorflow 1.15.0 can not detect gpu.
For your information, my system environment is python + cuda 10.1 + vs 2015.
The tensosflow versions 1.15.0 to 1.15.3 (the latest version) are all compiled against Cuda 10.0. Downgrading the cuda 10.1 to cuda 10.0 solved the problem.
Also be aware of the python version. It is recommended to install the tensorflow .whl file (as listed at https://nero-mirror.stanford.edu/pypi/simple/tensorflow-gpu/) for the specific python version. As for installation, see How do I install a Python package with a .whl file?
Tensorflow 1.15 expects cuda 10.0 , but I managed to make it work with cuda 10.1 by installing the following packages with Anaconda: cudatoolkit (10.0) and cudnn (7.6.5). So, after running
conda install cudatoolkit=10.0
conda install cudnn=7.6.5
tensorflow 1.15 was able to find and use GPU (which is using cuda 10.1).
PS: I understand your environment is Windows based, but this question pops on Google for the same problem happening on Linux (where I tested this solution). Might be useful also on Windows.
It might have to do with the version compatibility of TF, Cuda and CuDNN. This post has it discussed thoroughly.
Have you tried installing Anaconda? it downloads all the requirements and make it easy for you with just a few clicks.
I've searched around and non of the solutions seem to pertain to me, so here I am.
I installed anaconda 5.1 for python 3.6, I downloaded and installed 64-Bit(x86)Installer(551 MB)
from
https://www.anaconda.com/download/#linux
I followed the directions here
https://docs.anaconda.com/anaconda/install/linux
I had the install prepend the path and install microsoft VS code.
I then attempt to install the CPU only tensorflow using anaconda as suggested here
https://www.tensorflow.org/install/install_linux#InstallingAnaconda
I try to install the binary for python 3.6 CPU only
https://storage.googleapis.com/tensorflow/linux/cpu/tensorflow-1.6.0-cp36-cp36m-linux_x86_64.whl
I get the following error
tensorflow-1.6.0-cp36-cp36m-linux_x86_64.whl is not a supported wheel on this platform.
I am running a Ubuntu 16.04 VM on windows 10.
edit: when I run this command
pip install --ignore-installed --upgrade tfBinaryURL
outside of the tensorflow environment it worked.
2nd edit:
Additionally I explored my tensorflow environment in my anaconda3 folder, and I noticed it only has python 2.7, so when I tried to install the cpu only tensorflow while in the enviroment for python 2.7 it worked.
Was happy to know Tensorflow is made available for Windows and we don't have to use Docker.
I tried to install as per instructions but I get this error.
pip install --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-0.12.0rc0-cp35-cp35m-win_amd64.whl
tensorflow-0.12.0rc0-cp35-cp35m-win_amd64.whl is not a supported wheel on this platform.
What does that error mean?
I am running latest version of Python.
python --version
Python 3.5.2
This is most likely to be a 64-bit versus 32-bit issue. The pre-built TensorFlow pip package is 64-bit only, but the default version of Python 3.5.2 on Python.org is 32-bit. You can download the 64-bit release from here (select one of the "Windows x86-64" options).
It's only available for Python 3.5.x not 3.6.
You can quickly create a 3.5 environment with:
conda create -n tensorflow python=3.5
You must have a 3.5.x version of Python. The 3.6 version won't work.
If you have installed an Anaconda that contains Python 3.6, you need to downgrade its Python to 3.5.2.
Open the Anaconda Prompt as administrator, and run:
conda install python=3.5.2
After the installation is finished, you can follow the rest of the steps on tensorflow website.
Do you have Python and Anaconda installed? I had a similar issue until I uninstalled Anaconda and then the setup was fine.
I did the following steps and it worked.(Anaconda 4.4 x64)
1- Go to Windows 10 command prompt (right click and Run as admin)
2- if activated the path, you can run conda anywhere, if not, should go to .../anaconda3/scripts and run conda command from there and do the following (the main trick was to change 35 to 36)
1- conda -n tensorflow python=3.5
2- activate tensorflow
3- pip install --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-0.12.0rc0-cp36-cp36m-win_amd64.whl
issues fixed when i did the downgrading from 3.6 to 3.5 using the below
conda install python=3.5.2
There can be two reasons:
1) You are using 32-Bit python package. Tensorflow does not support 32 bit, only 64 fit.
Check in your system settings for this. If this is fine refer to second point..
2)You are using Python 3.7.
Python 3.7 isn't eventually officially supported by Python. It's still in beta testing,
and very much under active development.
Consider downgrading to a lower version of python. For now, stick with Python 3.6 or 3.5.