I have built a macro that does the following: My first sheet contains a list of names. Every time I run the macro, a name is added to the list and a new sheet is created. I would now like to, in the same macro, be able to create a button next to each new name every time I add a name that will allow me to navigate to the new sheet since I will be adding many of these. Do you have a suggestion for how I should do this?
Related
I have an item number scanned into excel B4 and based on the number, it returns either "Yes" or "No" into C4. If it says "Yes" I would like the item number in B4 to be added to another sheet. If it says "No", nothing needs to happen with this item number. I would like the items numbers to from a list in the separate sheet.
=IF(ISNUMBER(SEARCH("Yes",Sheet7!C4)),Sheet7!B4,)
My if statement is working fine but the issue now lies with a code to make jump to the next row after data has been changed so this can be a continuous process. Right now, after something has been scanned, it provides me with that value i need but as soon as another item is scanned it changes the value to the newest. i want a list of item numbers in the end
I won't write the code for you but look at events.
To get to these open the VBA window [Alt] + [F11] then go onto the sheet you want the event to action on.
Change the top left Drop Down to "Worksheet" and the top right will then let you select different events. for this I would recommend the 'Change' event, this causes the code to trigger whenever a cell is changed.
I have a continuous form which displays a small amount of data from each record in my table ProjectT (i.e. project name, status) and a command button in the footer which I would like to open the selected record in its expanded single form (where all of the relevant info is displayed).
At first I set this button up using Access's wizard, but realized that Access opens a selected record by filtering the data on the form. The problem with this is that once the expanded form is opened, I want a user to be able to move to other records without having to select to unfilter the results. If I change the button on my continuous form to simply open the expanded single form, is there code I can run to make the form open to the selected record without putting a filter on?
Initially I thought to set the expanded form's (named ProjectF) default value to Forms!ProjectListF!ProjectID (where ProjectListF is the continuous form and ProjectID is the autonumber primary key for ProjectT), but this was not successful, I think because there is more than one ProjectID displayed on ProjectListF.
Another thing to consider is that I have another button on my Main Menu form which opens the ProjectF form in data entry mode to prevent the user inadvertently changing/deleting an existing record when they are trying to add a new one; I have no idea if this might be important when trying to find a solution to my issue.
I'm open to any suggestion--I have an okay handle on SQL, and have delved into a little VBA but am completely self taught. Any ideas? Thanks!
You can open the detailed form with this command:
DoCmd.OpenForm "ProjectF", , , "[ProjectID] = " & Me!ProjectID.Value & ""
I am trying to put a number picker in a form in MS Access 2007. Here's an example of what I am trying to make:
I cannot find this in the default form controls, and have tried to make one myself using a listbox. Listboxes can be modified to look just like the number picker above, however the arrows only change the view, of the list, and not the actual selection (that is the value). For example, with the list box, if I have it range from 1 to 3, and default at 1 - when I change it to 2 via the arrows, the value of the listbox does not change, and is still one.
Does anyone know how to get a number picker in Access?
So you want to create a list of numbers and allow users to change the value displayed (AND stored as the control's value) using up and down arrows, such that they select the next or previous in the list.
I would suggest creating a text box and two buttons. Populate an array with the list of values. When a button is clicked it would:
A. Find the position in the array of any value already entered into the text box (eg loaded from a database)
B. Get the next or previous item from the array.
The array is populated as required (probably when the form is opened).
If you just need to allow the user to enter a whole integer number (ie a number spinner) you would do as follows:
Create one using a (locked) textbox and two buttons. Just add a textbox (name it something like txtValue) and two buttons (btnUp and btnDown), then add code like this to the Click event of those buttons:
Private Sub btnUp_Click()
Me.txtValue = Nz(Me.txtValue, 0) + 1
End Sub
Private Sub btnDown_Click()
Me.txtValue = Nz(Me.txtValue, 0) - 1
End Sub
You could add if statements to limit the data being entered
Or you can use a 3rd party control.
http://www.fmsinc.com/microsoftaccess/controls/components/spin-button/index.html
There are probably more, but be aware that using these sorts of controls in Access is unsupported, and there is no guarantee moving forward that they will work in Access. You're far better off using the native methods described earlier.
I have an an Excel sheet that uses VBA to generate some form control buttons on the fly.
the buttons are cleared and then new buttons are created.
I have noticed that even though old buttons are deleted Excel is keeping an internal register of each button. New buttons have button name of over 11K
I don't know if there is some sort of limit excel will allow for this and I don't want to run out of buttons.
I am not sure if this growing registry of buttons past is causing the file size to grow.
I would like to be able to reset the increment back to 0
Anyone have any idea how I can go back to button_0 ? (without starting a whole new Excel sheet)
Seems internal button count is sheet specific. Solution is to copy sheet, rename old sheet, then rename new sheet to old sheet name. Then delete old sheet. Viola! button count reset.
I found the answer somewhere in a forum, but I couldn't retrace it.
You could also pragmatically create the button by a function/sub-routine as a workaround.
Example: below function adds a button and limits the count to a fixed number (in my case, it is the total buttons available).
In my sheet, the first button is named "Button 687" (before I use the macro) and the second button is named "Button 2".
But, it is quite not dynamic when you want to add Drop Down or other form control etc. Macro recording helps you figure out the syntax, methods and properties of the form control you want to add though.
I am not sure why "buttons" is not listed in Properties/Methods after you typed "Activesheet." but Activesheet.Buttons(1).Name or Activesheet.buttons.add are valid codes.
Public Sub Add_Button(ButtonLabel$, ButtonSize#, BFontSize#, BFontName$)
Dim Button__ As Object
Dim One_Unit#: Per_Unit = Application.CentimetersToPoints(1)
'Creates a button at the sheet's first cell (row 1, col 1) with the height and width being 1cm.
Set Button__ = ActiveSheet.Buttons.Add(1, 1, One_Unit, One_Unit)
'button count will be restricted to the number set by user.
With Button__
.Name = "Button " & ActiveSheet.Buttons.Count
With .Characters
.Text = UCase(BLabel)
.Font.Name = BFontName
.Font.Size = BFontSize
End With
End With
End Sub
Sub AddAButton()
Add_Button BLabel:="SAVE"
Debug.Print ActiveSheet.Buttons(ActiveSheet.Buttons.Count).Name
End Sub
What is simplest/best way to achieve functionality in vba in Excel:
- button "add person" which will add 4 rows in which user specifies name...,
also "
- button "delete person" appearing in new added entry - to delete it
What is a workflow for doing that?
Should I record that first?
Should I write VBA only? How to keep the part that can be added/deleted - somewhere hidden or in VBA?
well the simplest solution is to create macros;
to add person
after that, you need to assign this macro to the button with vba ( by right click and assign macro).and loop it 4 times.
to delete person -->1st you make the button and set the visibility to false. After that you need to identify the row number, and set the button to visible in vba