This page shows a sample I want to reproduce:
http://dgrid.io/js/dgrid/test/Tree.html
(or any other of the samples here: http://dgrid.io/js/dgrid/test/)
I did a "view source" to see the code, but poking around and so far haven't found the data file "dgrid/test/data/hierarchicalCountryData".
It doesn't seem to be included in the code samples from GitHub (dgrid#1.2.1).
Also the normal doc/samples on the website don't show much about these tree features. I think I found it by doing a site:dgrid.io tree. So is this future research, or something currently available?
Related
I want to parse and get all the details related to my UI tests from xcresult file. Before Xcode 11, I can achieve this by reading the TestSummaries.plist file. But Apple has changed the xcresult format from Xcode 11.
I found this on google. But seems like it can only extract the screenshots from the xcresult bundle. I want to extract all details like, start/end times, action/activities times, code coverage details and logs etc.
Apple itself provide xcresulttool command line tool to see the xcresults in a human readable format. But it also does not gives all the needed information.
I saw about XCTestObservation & XCTestRun to build my own test observer but can't find any workable sample in the internet. Am I missing something? Did anyone throw some help on this?
XCTestHTMLReport has helped me to obtain beautiful HTML report with screenshots.
Note: Before asking i searched some on embedding but couldn't get exactly what i wanted.
I have a resume file in the pdf format that i would like to display in my website without storing anywhere like google or other but on my own. I have static website [which i made using Jekyll] lets say https://www.example.com and what i actually need is to display my resume accessible in the following link https://www.example.com/resume
Some of them have long permalinks and i actually hate them. (Just saying)
Upload the PDF into the website's / or assets/ directory.
To make a link for HTML:
CV
To make a link for Markdown:
[CV](<PATH>/cv.pdf)
On Chrome, this has been around for a long time and plagues webdevs to this day. There seem to be no plans to change that anytime soon because that's just the way it was built. Chrome behaves slightly different when not online, so offline/local-testing will not always produce expected result.
My answer to you, for this question, is a suggestion. In order to make it cross-browser compatible, your mode of implementation should be:
Modal or,
Lightbox
Whether or not you are using a SSG should not matter here. Look for a bootstrap or material implementation.
On the client-side, it is possible with extension. I reckon this isn't helpful to you; but I'm including this information for future readers.
I'm searching for a while, but didn't find a practical answer for the following problem:
An Articlepage in the Frontend can contain different types of sections. For example a block text section and than a text section with left photo an at the end an wallpaper photo.
Now I want to implement this in my backend dynamically, so that I can choose, which type of section and -even more important- how many sections my article should contain.
In my recent project I've solved the problem as an Articlesection with a Dropdown, wich contains the different section styles. And one article hat xy Artilesections as childpages. In the frontend I included all Childpages of the Article - so to speak the Articlesections, where I've checked with if conditions, which sectionsystyle I have in this Section and here I styled the section as I want.
For example Artilce1 has 2 Childpages: Articlesection1 and Artilcesection2.
In AS1 I have choose in the dropdown: right text with left photo and check with if conditions, to style the section. The same with AS2, that is for example a wallpaper photo.
This semiprofessional solution worked, but there are some bugs with displaying the Article correct in the backend, because I have to declare the Articlesections as Includes and not native childpages. And in generell this don't seems like the developers of silverstripe want the users to do it this way..
Are there better ways to implement a dynamically changing backend, so I can decide, which and how much sections I have in the frontend.
Take a look at https://github.com/sheadawson/silverstripe-blocks. There's quite a few addons that offer similar functionality as Blocks such as Elemental. The following blog post might also be useful too - https://www.silverstripe.org/blog/silverstripe-strips/.
Thank you for your reply, but there is a problem, because I don't work a lot with the terminal and the composer. In principle I want to install sheadawsons silverstripe-block. I have installed the composer and run the command:
"composer require sheadawson/silverstripe-blocks" it seems like it installed that correctly, because I became no errors, but what then? With dev/build -to refresh the database- happened nothing and the following instructions in the readmy chanced nothing. Should I copy any files in my Sivlerstripe web folder or what else..? I'm a bit desperate, because there is such a poor documentation.
Tank you
I'm trying to learn Cucumber. After poking around a bit on SO I found a link to this tutorial. It was very helpful (and I recommend it highly!), but, for a beginner like myself, a couple of the early steps were opaque. I thought I'd explain these two pitfalls here, to spare future Cucumber students the head-scratching they caused me.
The two problems both came up in this section:
Starting the fail-fix cycle
I run it using cucumber features, and it fails on the first line –
Given I go to the new book page – because cucumber doesn’t know where
the “new book page” is. So I add that to the cucumber paths helper.
when /the new book page/
new_book_path
I had trouble interpreting this section and running her code.
My first question was: where do I find the cucumber paths helper file?
Once I figured it out and ran cucumber features, I got a syntax error.
My second question was how do I debug the syntax error that her code raises? I've tried to answer these two questions below.
First Gotcha: where the heck is the `cucumber paths helper'?
First off, she talks about adding a step to the cucumber paths helper. I struggled for a while to figure out where this file was located. I couldn't find anything with a similar name in my app, and google searches didn't yield any useful results. What was going on?
It turns out that I couldn't find the file because it's not automatically generated -- you need to create it yourself. Furthermore, the name of the file is totally arbitrary: it doesn't need to be called cucumber_paths_helper. That's why my google searches were fruitless.
For her code snippet to be executed it just needs to be in some file living in the features/support folder. All of the code in this directory is executed before any cucumber tests are run. The solution? I put her code into a new file at features/support/manage_books_steps.rb.
Ok, one down...
Second Gotcha: syntax error, unexpected keyword_when
The next problem showed up when I tried to run cucumber features. I got this:
/Users/dB/myApp/features/support/manage_books_steps.rb:1: syntax error, unexpected keyword_when
when /the new book page/
^ (SyntaxError)
For some reason my system couldn't parse this code. I'm not sure why exactly, but I'm guessing that Sarah was using some gem or tool to preprocess her code that I didn't have installed, and she unfortunately didn't go into detail about her gemset in the article. (Maybe she wrote it before cucumber's training wheels came off?) In any case, after consulting some other cucumber tutorials I tried reformatting her snippet like so.
When /^I go to the new book page$/ do
visit new_book_path
end
This worked.
After getting past those two little obstacles, the rest of the tutorial was a synch.
Anyway, I hope this helps someone somewhere down the line. And thanks, Sarah, for a great tutorial.
Edits/comments/corrections are welcome.
I am trying to use core plot with an ios app I am writing, but I am unable to build after following the instructions to set up the library for use. I am getting the following message.
'CorePlot0' does not contain a valid pid
Sorry the tutorial I used is here http://recycled-parts.blogspot.com/2011/07/setting-up-coreplot-in-xcode-4.html
This has been asked (and answered) a number of times on this site alone. The most helpful suggestion on those (many) similar questions that reference the blog post you mentioned says you should read that post's comments since the post refers to older code.
If all else fails, create a new test project and try following the (comment-updated) instructions again. If it still doesn't work, update your question with much more detail regarding what you tried and where it went wrong. Include build logs, run logs, etc. - we're not mind readers.