I have a xrdp server running and would like to connect to it using Guacamole. However, each time I try to make any RDP connection it always fails with "You Have Been Disconnected." I know it is a fault with guacamole because I can log into xRDP using Remmina RDP client using the same credentials.
Here are my Logs:
/var/run/syslog :
Jul 26 10:02:36 ubuntu guacd[1291]: Creating new client for protocol "rdp"
Jul 26 10:02:36 ubuntu guacd[1291]: Connection ID is "$0c72bf59-0ff9-448d-a5a2-dc3229157122"
Jul 26 10:02:36 ubuntu guacd[5737]: Security mode: ANY
Jul 26 10:02:36 ubuntu guacd[5737]: Resize method: none
Jul 26 10:02:36 ubuntu guacd[5737]: User "#cce2ec3d-03c5-4387-be88-054a00927f56" joined connection "$0c72bf59-0ff9-448d-a5a2-dc3229157122" (1 users now present)
Jul 26 10:02:36 ubuntu guacd[5737]: Loading keymap "base"
Jul 26 10:02:36 ubuntu guacd[5737]: Loading keymap "en-us-qwerty"
Jul 26 10:02:36 ubuntu kernel: [ 4736.455320] guacd[5749]: segfault at 8000000000 ip 0000008000000000 sp 00007f3bc9f8bc98 error 14
Jul 26 10:02:36 ubuntu kernel: [ 4736.455323] traps: guacd[5750] general protection ip:7f3bcb074c69 sp:7f3bc978ac98 error:0
Jul 26 10:02:36 ubuntu kernel: [ 4736.455323]
Jul 26 10:02:36 ubuntu kernel: [ 4736.455325] in libguac.so.5.0.0[7f3bcb070000+d000]
Jul 26 10:02:36 ubuntu guacd[1291]: Connection "$0c72bf59-0ff9-448d-a5a2-dc3229157122" removed.
/var/log/tomcat8/Catalina.out :
10:02:33.079 [http-nio-8080-exec-2] WARN o.a.g.r.auth.AuthenticationService - Authentication attempt from 0:0:0:0:0:0:0:1 for user "-------" failed.
10:02:33.943 [http-nio-8080-exec-1] WARN o.a.g.r.auth.AuthenticationService - Authentication attempt from 0:0:0:0:0:0:0:1 for user "jonathan" failed.
10:02:36.100 [http-nio-8080-exec-6] INFO o.a.g.r.auth.AuthenticationService - User "guacadmin" successfully authenticated from 0:0:0:0:0:0:0:1.
10:02:36.241 [http-nio-8080-exec-10] INFO o.a.g.tunnel.TunnelRequestService - User "guacadmin" connected to connection "3".
10:02:38.179 [Thread-7] INFO o.a.g.tunnel.TunnelRequestService - User "guacadmin" disconnected from connection "3". Duration: 1937 milliseconds
Connection settings:
security mode: any
port: 3389
I am on ubuntu server 16.04. Any possible solutions would be much appreciated.
Try:
Removing the [path to libfreerdp*.so]/freerdp/guac*.so files that were copied, assuming this is the case.
Create symbolic links within [path to libfreerdp*.so]/freerdp/ to /usr/local/lib/freerdp/guac*.so, so you do not need to worry about
this going forward.
Source: RDP stopped working v0.9.9 - Apache Guacamole.
Related
At beginning I successfully configured radius server with mariadb and httpd. But I changed to hostname of the server and rebooted. Now even if the mariadb and httpd is running but radiusd failed to start. Here is the answer from journalctl -xe .. Please help me.
Jan 10 12:34:08 cpe.twcny.res.rr.com systemd[1]: Unit radiusd.service entered failed state.
Jan 10 12:34:08 cpe.twcny.res.rr.com systemd[1]: radiusd.service failed.
Jan 10 12:34:08 cpe.twcny.res.rr.com polkitd[963]: Unregistered Authentication Agent for unix-process:2183:15540 (system bus name :1.43, object path /org/
Jan 10 12:40:01 cpe.twcny.res.rr.com systemd[1]: Created slice User Slice of root.
I'm using RHEL 7.4 OS. I have done systemctl disable httpd.service to disable auto start of httpd. It is disabled also.
[root#clustermrfc002 ~]# systemctl is-enabled httpd
disabled.
But on reboot httpd service is starting.
Jul 28 18:02:07 clustermrfc002.novalocal systemd[1]: Starting The Apache HTTP Server...
Jul 28 18:02:08 clustermrfc002.novalocal httpd[8732]: [Sat Jul 28 18:02:08.357617 2018] [core:warn] [pid 8732] AH00117: Ignoring deprecated use
Jul 28 18:02:08 clustermrfc002.novalocal systemd[1]: Started The Apache HTTP Server.
which is causing problem in rhel 7 pacemaker cluster, below error is seen.
Jul 28 18:12:23 clustermrfc001 pengine[7420]: error: Resource MNGT_httpd_rhcdDaemon (systemd::httpd) is active on 2 nodes attempting recovery
Check the output of "chkconfig" and review its runlevel.
Or, check if any other service for HTTPD is enabled using "systemctl list-unit-files", if enabled, disable and verify
Although httpd.service is disabled to start on boot, its started by network.target as a dependency.
Jul 26 15:02:41 localhost.localdomain systemd[1]: Starting Network.
Jul 26 15:02:41 localhost.localdomain systemd[1]: Starting /etc/rc.d/rc.local Compatibility...
Jul 26 15:02:41 localhost.localdomain systemd[1]: Starting Postfix Mail Transport Agent...
Jul 26 15:02:41 localhost.localdomain systemd[1]: Starting Dynamic System Tuning Daemon...
Jul 26 15:02:41 localhost.localdomain systemd[1]: Starting PostgreSQL database server...
Jul 26 15:02:41 localhost.localdomain systemd[1]: Starting Simple Network Management Protocol (SNMP) Daemon....
Jul 26 15:02:41 localhost.localdomain systemd[1]: Starting
The Apache HTTP Server...
Fix as jayant say.
cat upload.sh
/home/Dropbox-Uploader/dropbox_uploader.sh upload -f /home/Dropbox-Uploader/.dropbox_uploader /home/material/* /
date >> /home/upload.log
All files in directory material can be uploaded into my dropbox with bash upload.sh.
I want to write a autorun service at shutdown to upload files into dropbox.
vim /etc/systemd/system/upload.service
[Unit]
Description=upload files into dropbox
Before=network.target shutdown.target reboot.target
[Service]
ExecStart=/bin/true
ExecStop=/bin/bash /home/upload.sh
StandardOutput=journal
StandardError=journal
[Install]
WantedBy=multi-user.target
Enable it with:
sudo systemctl enable upload.service
To reboot it.
journalctl -u upload
-- Logs begin at Thu 2018-01-18 22:38:54 EST, end at Tue 2018-04-10 06:55:43 EDT. --
Apr 10 06:48:27 localhost systemd[1]: Started upload files into dropbox.
Apr 10 06:48:27 localhost systemd[1]: Starting upload files into dropbox...
Apr 10 06:48:27 localhost bash[111]: which: no shasum in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
Apr 10 06:48:27 localhost bash[111]: > Uploading "/home/material/test.txt" to "/test.txt"...
Apr 10 06:48:27 localhost bash[111]: Error: Couldn't resolve host.
ln -s /usr/bin/sha1sum /usr/bin/shasum according to google's result.
Reboot the second time.
journalctl -u dropbox
Apr 10 06:55:04 localhost systemd[1]: Started upload files into dropbox.
Apr 10 06:55:04 localhost systemd[1]: Starting upload files into dropbox...
Apr 10 06:55:04 localhost bash[113]: shasum: invalid option -- 'a'
Apr 10 06:55:04 localhost bash[113]: Try 'shasum --help' for more information.
Apr 10 06:55:04 localhost bash[113]: shasum: invalid option -- 'a'
Apr 10 06:55:04 localhost bash[113]: Try 'shasum --help' for more information.
Apr 10 06:55:04 localhost bash[113]: > Uploading "/home/material/test.txt" to "/test.txt"...
Apr 10 06:55:04 localhost bash[113]: Error: Couldn't resolve host.
Do as Raushan say,new issue arised,
Uploading by 4 chunks *** FAILED dropbox
For the problem Uploading by 4 chunks *** FAILED dropbox ,some material say that if files exceeding 150 mb should be uploaded in chunks.
split -b 10m /home/upload.tar.gz /home/material/dropbox
ls /home/material
dropboxaa dropboxac dropboxae dropboxag ......
Both of them is less than 10m.
journalctl -u upload
Apr 19 01:45:26 localhost systemd[1]: Started upload files into dropbox.
Apr 19 01:45:26 localhost systemd[1]: Starting upload files into dropbox...
Apr 19 01:45:27 localhost bash[401]: > Uploading "/home/material/dropboxaa" to "/dropboxaa"... FAILED
Apr 19 01:45:27 localhost bash[401]: An error occurred requesting /upload
Apr 19 01:45:28 localhost bash[401]: > Uploading "/home/material/dropboxab" to "/dropboxab"... FAILED
Apr 19 01:45:40 localhost bash[401]: Some error occured. Please check the log.
Apr 19 01:45:40 localhost systemd[1]: upload.service: main process exited, code=exited, status=1/FAILURE
Apr 19 01:45:40 localhost systemd[1]: Unit upload.service entered failed state.
Apr 19 01:45:40 localhost systemd[1]: upload.service failed.
Why > Uploading "/home/material/dropboxaa" to "/dropboxaa"... FAILED?
It is not possible that the second instruction of your script executes without executing the first one. Try redirecting the error output of the dropbox_uploader.sh to see what is failing.
Assuming you are using dropbox-uploader, try specifying the exact location of the configuration file. See Running as cron job section in their README.md
/home/Dropbox-Uploader/dropbox_uploader.sh -f /path/to/.dropbox_uploader upload /home/material/* /
For the Couldn't resolve host problem :
Unit configuration should have dependency like
After=network.target instead of Before=network.target as the default shutdown order is inverse of startup
[Unit]
Description=upload files into dropbox
Before=shutdown.target reboot.target
After=network.target
[Service]
ExecStart=/bin/true
ExecStop=/bin/bash /home/upload.sh
StandardOutput=journal
StandardError=journal
[Install]
WantedBy=multi-user.target
Refer: https://serverfault.com/a/785355
For the shasum problem :
I am not sure about your OS distro, I am using Fedora 25.
In my case shasum binary is from perl-Digest-SHA package which can be installed by command yum install perl-Digest-SHA on RedHat based linux distro
Refer: https://superuser.com/a/1180163
I followed this guide https://www.rabbitmq.com/install-debian.html and installed rabbitmq-server. However, it won't start with an error message:
Jul 31 20:29:49 76672.local rabbitmqctl[7519]: attempted to contact: [rabbit#76672]
Jul 31 20:29:49 76672.local rabbitmqctl[7519]: rabbit#76672:
Jul 31 20:29:49 76672.local rabbitmqctl[7519]: * unable to connect to epmd (port 4369) on 76672: badarg (unknown POSIX error)
Jul 31 20:29:49 76672.local rabbitmqctl[7519]: current node details:
Jul 31 20:29:49 76672.local rabbitmqctl[7519]: - node name: 'rabbitmq-cli-30#76672'
Jul 31 20:29:49 76672.local rabbitmqctl[7519]: - home dir: /var/lib/rabbitmq
Jul 31 20:29:49 76672.local rabbitmqctl[7519]: - cookie hash: VwJCJ/LkSvmUKaoPOglCcQ==
Jul 31 20:29:49 76672.local systemd[1]: Failed to start RabbitMQ broker.
Jul 31 20:29:49 76672.local systemd[1]: rabbitmq-server.service: Unit entered failed state.
Jul 31 20:29:49 76672.local systemd[1]: rabbitmq-server.service: Failed with result 'exit-code'.
dpkg: error processing package rabbitmq-server (--configure):
subprocess installed post-installation script returned error exit status 1
Processing triggers for systemd (229-4ubuntu17) ...
Processing triggers for ureadahead (0.100.0-19) ...
Errors were encountered while processing:
rabbitmq-server
E: Sub-process /usr/bin/dpkg returned an error code (1)
altor_work#76672:
I tried to do this installation on a clear instance of Ubuntu and got the same error. I googled the error message and it seems I have some problem with network settings - I guess I should change some settings from their default state.
Any idea what needed to be changed? Or with which setting I should take my first try?
P.S. I'm completely novice in Unix. For me, it's just a cloud environment where I run my Python scripts.
I solved my problem by setting HOSTNAME in the file rabbitmq-env.conf. I don't know what exactly caused the problem in the first place.
My settings:
sudo cat /etc/hostname
76672.localhost
sudo cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 ubuntu16.04 ubuntu16
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
127.0.0.1 76672.local
/etc/rabbitmq/rabbitmq-env.conf
# Empty - if the file is empty rabbitmq doesn't start
HOSTNAME=76672.local # With this rabbitmq doesn't start either
HOSTNAME=localhost # With this all works
If it works with localhost setting only please check out the following:
fgrep BindToDevice /lib/systemd/system/epmd.socket
In apache, the module mod_jk not changes IP of hostname when occurs changing of IP on DNS.
Version of apache:
Server version: Apache/2.2.15 (Unix)
Server built: Aug 2 2013 08:02:15
Version mod_jk: 1.2.37
Example:
workers.properties
worker.portalconsultoras_prd.type=ajp13
worker.portalconsultoras_prd.host=hostexample.com.br
worker.portalconsultoras_prd.port=8009
This configuration works fine.
But, when occurs change ip in the host name in DNS, the module md_jk starts fail to connect. Follow below the log of mod_jk:
[Wed Sep 18 12:00:33 2013] [5315:140659824723936] [info] jk_open_socket::jk_connect.c (627): connect to 107.xx.xx.220:8009 failed (errno=115)
[Wed Sep 18 12:00:33 2013] [5315:140659824723936] [info] ajp_connect_to_endpoint::jk_ajp_common.c (995): Failed opening socket to (107.xx.xxx.220:8009) (errno=115)
[Wed Sep 18 12:00:33 2013] [5315:140659824723936] [error] ajp_send_request::jk_ajp_common.c (1630): (portalconsultoras_prd) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=115)
I would like a configuration of apache that avoid this problem.
Looking for the solutions in google, have turn on the "HostnameLookups", but is inefficient.
Thanks!