I installed Apache 2.4.27 and PHP 7.1.7 from source, but I don't find a tip about how to install libapache2-mod-php7.1 or the required module.
How can I install libapache2-mod-php7.1 (or similar) to Apache 2 located under /user/local/apache2?
I have to install it on Debian 8.8 Jessie.
Basically it should be installed during installation of PHP:
sudo apt-get install php7.1
...
The following NEW packages will be installed:
libapache2-mod-php7.1 libssl1.0.2 php-common php7.1 php7.1-cli php7.1-common php7.1-json php7.1-opcache php7.1-readline
So first check if it is already installed:
dpkg -l | grep libapache2-mod-php7.1
ii libapache2-mod-php7.1 7.1.7.retag-1+0~20170711133844.5+jessie~1.gbp5284f4 amd64 server-side, HTML-embedded scripting language (Apache 2 module)
In case it is not installed the following command should work fine:
sudo apt-get install libapache2-mod-php7.1
If it will fail check if it is available in repo:
apt-get update
apt-cache search libapache2-mod-php7.1
I used deb.sury.org for php 7.1:
apt-get install apt-transport-https ca-certificates
wget -O /etc/apt/trusted.gpg.d/php.gpg https://packages.sury.org/php/apt.gpg
echo "deb https://packages.sury.org/php/ jessie main" > /etc/apt/sources.list.d/php.list
apt-get update
Related
I am trying to install Tensorflow-serving to my Centos 8 machine. Installing with Docker image is not an option for Centos. So I try to install with pip. These are the commands for installing tensorflow-model-server:
pip3 install tensorflow-serving-api==1.15
echo "deb [arch=amd64] http://storage.googleapis.com/tensorflow-serving-apt stable tensorflow-model-server tensorflow-model-server-universal" | sudo tee /etc/apt/sources.list.d/tensorflow-serving.list
curl https://storage.googleapis.com/tensorflow-serving-apt/tensorflow-serving.release.pub.gpg | sudo apt-key add -
sudo apt-get update && sudo apt-get install tensorflow-model-server
The problem is I need version 1.15.0 and I couldn't find how to modify links to install the 1.15 version. Any help for modifying links, ideas for installing "tensorflow/serving" to Centos 8 will be appreciated by me :)
I found the links:
wget 'http://storage.googleapis.com/tensorflow-serving-apt/pool/tensorflow-model-server-1.15.0/t/tensorflow-model-server/tensorflow-model-server_1.15.0_all.deb'
dpkg -i tensorflow-model-server_1.15.0_all.deb
pip3 install tensorflow-serving-api==1.15
With these commands, it works :)
I am running Virtuamin on centos 7, I am unable to install ziparchive on php 7.4, but when I switch to php 7.2, it works. I need php 7.4 to work because it is faster and wordpress script need 7.3+ to work effectively.
sudo apt-get install php7.4-zip
This works in ubuntu 18.04
Maybe you would like to take a look on this post:
https://www.cloudbooklet.com/upgrade-php-version-to-php-7-4-on-ubuntu/
Basically, it tells you to:
Add PPA for PHP 7.4
Add the ondrej/php which has PHP 7.4 package and other required PHP extensions.
sudo apt install software-properties-common
sudo add-apt-repository ppa:ondrej/php
sudo apt update
Then you can install the extension
sudo apt install php7.4-zip
Or install all the commonly used ones:
sudo apt install php7.4-common php7.4-mysql php7.4-xml php7.4-xmlrpc php7.4-curl php7.4-gd php7.4-imagick php7.4-cli php7.4-dev php7.4-imap php7.4-mbstring php7.4-opcache php7.4-soap php7.4-zip php7.4-intl -y
I am on Debian 9, which does not ship with PHP7.4, but it can be installed if you add the repository from Sury.
sudo apt install ca-certificates apt-transport-https
wget -q https://packages.sury.org/php/apt.gpg -O- | sudo apt-key add -
echo "deb https://packages.sury.org/php/ stretch main" | sudo tee /etc/apt/sources.list.d/php.list
After that, I ran this with success:
apt install php7.4-zip
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
php7.4-zip
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 20.5 kB of archives.
After this operation, 94.2 kB of additional disk space will be used.
Get:1 https://packages.sury.org/php stretch/main amd64 php7.4-zip amd64 7.4.7-1+ 0~20200612.18+debian9~1.gbp671911 [20.5 kB]
Fetched 20.5 kB in 0s (149 kB/s)
Selecting previously unselected package php7.4-zip.
(Reading database ... 107553 files and directories currently installed.)
Preparing to unpack .../php7.4-zip_7.4.7-1+0~20200612.18+debian9~1.gbp671911_amd 64.deb ...
Unpacking php7.4-zip (7.4.7-1+0~20200612.18+debian9~1.gbp671911) ...
Processing triggers for libapache2-mod-php7.4 (7.4.7-1+0~20200612.18+debian9~1.g bp671911) ...
Setting up php7.4-zip (7.4.7-1+0~20200612.18+debian9~1.gbp671911) ...
Creating config file /etc/php/7.4/mods-available/zip.ini with new version
Processing triggers for php7.4-fpm (7.4.7-1+0~20200612.18+debian9~1.gbp671911) . ..
NOTICE: Not enabling PHP 7.4 FPM by default.
NOTICE: To enable PHP 7.4 FPM in Apache2 do:
NOTICE: a2enmod proxy_fcgi setenvif
NOTICE: a2enconf php7.4-fpm
NOTICE: You are seeing this message because you have apache2 package installed.
Processing triggers for libapache2-mod-php7.4 (7.4.7-1+0~20200612.18+debian9~1.g bp671911) ...
Processing triggers for php7.4-cgi (7.4.7-1+0~20200612.18+debian9~1.gbp671911) . ..
Processing triggers for php7.4-cli (7.4.7-1+0~20200612.18+debian9~1.gbp671911) . ..
This is how I installed it on my ubuntu:-
For PHP
sudo apt-get install php7.0-zip
For Centos
You can try: yum install php-pecl-zip.x86_64
Try installing that and enabling it by running: echo "extension=zip.so" >> /etc/php.d/zip.ini
NOTE: Make sure to restart your server after install the above
sudo /etc/init.d/apache2 restart or sudo service nginx restart
I need to install GeoIP on PHP 7.2 .
For this I am using following commands -
sudo apt-get -y install gcc make autoconf libc-dev pkg-config
sudo apt-get -y install libgeoip-dev
sudo pecl7.2-sp install geoip-beta
Top two commands are run successfully, But while running the third on I am getting following error -
sudo: pecl7.2-sp: command not found
Any suggestion, How can I install pecl on php 7.2 or any other way to install GeoIP on php 7.2.
I am on ubuntu 16:04 and the following got it working for me (more or less):
Run the following command:
sudo apt-get install php-pear php-dev
Now you can run the command pecl instead pecl7.2-sp - seems to work fine though:
sudo pecl install geoip-beta
Hope that helps.
I had to install imagick for php7.3 so I was getting same error using command like this
sudo pecl7.2-sp install imagick
What worked for me is running the command like this
pecl -d php_suffix=7.3 install -f imagick
Been trying to run rebol-view-278-4-2 on Elementary OS "Freya" (a variant of Ubuntu 14.04 LTS).
I keep getting this error:
error while loading shared libraries: libXaw.so.7: cannot open shared object file: No such file or directory
I went ahead and tried to install the missing library but to no avail.
These are the steps I took to get R2 core and view working on Ubuntu 14.04 LTS "Trusty," so I would imagine that this would also work on Freya:
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install libc6:i386 libncurses5:i386 libstdc++6:i386
sudo apt-get update
sudo apt-get install libx11-6:i386
sudo apt-get install libxext6:i386
sudo apt-get install libxaw7:i386
sudo apt-get install libfreetype6:i386
sudo apt-get install xfonts-100dpi xfonts-75dpi
(I prefer to keep the package install steps separate in case one of them fails.)
I'm just finished installing Ubuntu 13.10.
I want try Phalcon, and when I build the source (phalcon.so), I have this error :
from /home/fabrice/Downloads/cphalcon/build/32bits/phalcon.c:204:
/usr/include/php5/ext/pcre/php_pcre.h:29:18: fatal error: pcre.h: No such file or directory
#include "pcre.h"
^
compilation terminated.
make: *** [phalcon.lo] Erreur 1
My installation of lamp is :
sudo apt-get install -y apache2 php5 mysql-server libapache2-mod-php5
php5-mysql php5-curl php5-imagick php5-mcrypt php5-memcache
php5-sqlite php5-xdebug php-apc php5-intl php-mongo php5-dev gcc
Can anybody help me ?
The latest version of Phalcon uses PCRE libraries.
You can install them like so:
sudo apt-get install libpcre3-dev
and then try and install Phalcon again
For CentOS you will need to use
sudo yum install pcre-devel
Credits: #xgretsch
For Mac you can use
brew install pcre
Credits #Brandon Romano
For Mac without brew
Go to https://www.pcre.org/ and download latest pcre:,
tar -xzvf pcre-8.42.tar.gz
cd pcre-8.42
./configure --prefix=/usr/local/pcre-8.42
make
make install
ln -s /usr/local/pcre-8.42 /usr/sbin/pcre
ln -s /usr/local/pcre-8.42/include/pcre.h /usr/include/pcre.h
Credits #user1377324
For mac osx maverick you can use
brew install pcre
if it gives you error, you can use
sudo ln -s /opt/local/include/pcre.h /usr/include/
sudo pecl install apc
I have installed pcre via homebrew in Big Sur, so linked as:
sudo ln -s /opt/homebrew/include/pcre2.h /usr/local/include/
To include pcre.h file, search the package archives for the pcre.h file.
To do this I use a command called apt-file (
apt-get install apt-file
and
apt-file update
if you don’t have it installed).
Then search for the pcre package:
apt-file search -x "/pcre.h$"
The -x informs the command that I want to use a regular expression as the pattern. apt-file provided me with three hits:
kannel-dev: /usr/include/kannel/gwlib/pcre.h
libajax6-dev: /usr/include/ajax/pcre.h
libpcre3-dev: /usr/include/pcre.h
The last one is the one I want:
apt-get install libpcre3-dev
This will solve the problem with pcre.h file compilation problem. Hope it will help others, who may come to find an answer to this thread.
For MacOS monterey amd64 (darwin), it is necessary to create a symlink.
First, locate where the pcre.h was installed by Brew:
$ brew list pcre | grep 'pcre\.h$'
/opt/homebrew/Cellar/pcre/8.45/include/pcre.h
Then, gets the directory that GCC is looking for header (.h) files:
$ cpp -v
...
#include <...> search starts here:
/Library/Developer/CommandLineTools/usr/lib/clang/13.0.0/include
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include
/Library/Developer/CommandLineTools/usr/include # <---- we are going to use this one
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks (framework directory)
Finally, create a symlink to the pcre.h file, so that GCC will find it in its search path:
ln -s /opt/homebrew/Cellar/pcre/8.45/include/pcre.h \
/Library/Developer/CommandLineTools/usr/include/pcre.h
To test if it worked, we can use the following C code:
#include <stdio.h>
#include <pcre.h>
int main() {
printf("lala popo");
return 0;
}
And run:
gcc test.c -o test
🎉🎉🎉🎉🎉🎉
Using macOS Monterey 12.6 on an M1 Pro MacBook Pro, here are the steps necessary to install outh extension for PHP 8.1 using brew:
brew install pcre
brew install pcre2
sudo ln -s /opt/homebrew/include/pcre.h /usr/local/include/
sudo ln -s /opt/homebrew/include/pcre2.h /usr/local/include/
sudo pecl install oauth