I've installed the SQL Server MgmtStudio 64BIT\SQLManagementStudio_x64_ENU.exe . I tried to login in the SSMS but it throws an error specifying "Network Path Not Found.". After googling I found to start the services.
But, in my services I couldn't even find the list of SQL services as show in the below image.
I even checked the sql server configuration and everything is enabled.
This is my first time installation in Windows 10 64 bit.
Please provide if this might be a duplicate.
I think you installed only the management studio client. Please install the Server version of SQL Server
https://www.microsoft.com/en-us/download/details.aspx?id=42299
Related
I've installed SQL Server 2016 (Standard Edition) on a Windows Server 2016, selecting Integration Services to be installed too. I've also installed SSMS and SSDT from the same installation media.
I am running SSMS as administrator and can connect to the local Database engine.
My user is a Windows and SQL Server admin.
However I cannot connect (explicitly using the server name) or even browse to the local Integration Services?
Receiving the following error.
SSIS not browsable and can't connect
Having already searched for an answer to this problem, many suggest checking that the service is running etc. which can be seen in the Services and SQL Configuration Manager.
Services shown as running
I've also tried turning off the Windows Firewall to establish if that is the cause of the problem but it had no effect.
Anyone got any ideas what might be preventing it from being accessible?
I've had this problem last month. In my case I had to install the 32-bit version of access database engine (on my 64 bit windows).
Sql data tools works with 32-bit
https://www.microsoft.com/en-us/download/details.aspx?id=54920
The later SSMS versions (16.x and 17.x) will only connect to their respective versions SQL 2016 and SQL 2017. Microsoft is planning to retire the older method in favor of the SSISDB, which is more secure.
Link to the official statement from Microsoft (in the note box).
I have had the same problem and the solution was to install the old interface on top of the existing one (SQL Server Management Studio 2016). Here's link to the installation file. After having installed this, I can now connect to the integration services. You will have to set it up of course and give yourself Rights
I installed SQL server 2012 developer addition.
My windows is working on Parallel Access installed on MAC.
When I tried opening SQL server, It initiated a call to connect to server. And when I clicked on connect it gave me error.
I've never installed SQL server 2012 in my personal PC. WHen I was installing I chose Windows authentication mode and user ROMANCH9326 came out automatically.
Please help me, I'm clueless about this problem.
TITLE: Connect to Server
Cannot connect to ROMANCH9326.
ADDITIONAL INFORMATION:
Login failed for user 'ROMANCH9326\romanch'. (Microsoft SQL Server, Error: 18456)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
On Start > Search type "sql configuration"
Open SQL Configuration Manager
SQL Server Network Configuration >Protocols for [SQLINSTANCENAME]
Check if Named Pipes is enabled, enable it if not.
Restart your SQL Server Instance.
Well This is a pretty silly solution but when I tried repair function on SQL server it said that my Database Engine libraries were not installed properly somehow.
So I reinstalled the software and now it worked just fine. I was able to log in.
Thanks :)
I've just built a new dev machine and I can't get SQL Server Agent working. What I've done so far:
Install VS 2010 (I think this installed an express version of SQL Server)
Install SQL Server 2008 R2 Developer edition.
I'm not sure if I did something wrong in step 2. All I want is a fully working version of SQL Server with SQL Server Agent running and no limitation on the amount of data I can store (I will need more than 10GB).
Currently, in SSMS I have the following instance: ./SQLEXPRESS. I thought that during step 2, this would have been upgraded, but it doesn't seem so.
Can anyone help?
Note: I ended up resolving this by uninstalling everything that had "SQL Server" in it in Control Panel > Programs and Features. I then reinstalled from scratch.
Note: I ended up resolving this by uninstalling everything that had "SQL Server" in it in Control Panel > Programs and Features. I then reinstalled from scratch.
The agent account is disabled. If you aren't able to enable it through configuration manager, try enabling it through services. After its enabled, try starting the serivce. If you still have issues starting the agent, try changing the account the service is running under. There may also be an issue with the account that the SQL Server service is running under. Trying changing the SQL Server service account and restarting it. The agent should then start up successfully.
You have two installations, with two named instances. The Express named SQLEXPRESS and the developer edition named MSSQLSERVER (unless you changed this during install). connect to .\MSSQLSERVER and see, it should be there available to be started.
SQL Server Express does not ship with the SQL Server Agent.
I've just started work on a new computer in which I had to download all the software fresh.
I've just download a copy of SQL Server 2008 R2, and I'm trying to connect to SQL Server Management Studio without success. I vaguely remember last time I installed this, it asked me to choose between windows, or sql server authentication, however this didn't happen for this installation.
If I try to login via Windows Authentication (where the username and password fields are greyed out, localhost as server name) it gives the following error:
"A Network-related or instance
specific error occured while
establishing a connection to SQL
Server. The server was not found or
was not accessible. Verify that the
instance name is correct and that SQL
Server is configured to allow remote
connections. (provider: Named Pipes
Provider, error: 40 - Could not open a
connection to SQL Server) (Microsoft
SQL Server, Error: 2)"
I have checked everything in SQL Server Configuration Manager, and everything bar VIA is enabled.
If I try SQL Server Authentication, It asks me for a username and password which I definiately have not set yet. Also, under SQL Server Services in configuration manager, there is nothing there.
Any help would be appreciated :)
Thanks
PS: I don't know if it's worth mentioning but I am running Windows 7 as a virtual machine on a Mac.
Are you sure you have the correct instance name? If it was SQL Server 2008 R2 Express Edition then the default instance name is .\SQLEXPRESS.
Also if your using sql authentication to connect try running sql management studio as admin, if you are a limited user your identity might not be mapped to an account in sql server yet but i believe the Administrators user group is.
You need to check if your services are running.
Please type
net start mssqlserver
in your command prompt. Then try to login.
Ended up reinstalling completely and doing a fresh install from a fresh download. When I did this I was brought through the steps of selecting the default instance, and selecting authentication modes.
Working fine now :)
After checking tons of sites looking for an answer to this question, I think I have a simple solution.
Open the sql Server Configuration
Click on the sql server services node
Right Click on Sql server
Click Start.
I have been screwing around with this forever, and this simple method actually worked.
I have installed SQL Server 2005 three times now on the same box. I cleaned up registry settings, files, you name it.
All along I have been trying to install SQL Server 2005 Database and Reporting Services (x64) on a Windows 2008 Server. I have also applied the SP3 patch. Installing and Restarting the Server at every point. Verified that the installation was 64bit. ASP.NET and IIS7 are both running under 64bit.
Also, I have installed multiple instances (SQLDEV64, SQLQA64, SQLSTAGE64) of the Database and Reporting Services.
I started to go through the Reporting Services Configuration manager, installing the Reporting Database along with setting up IIS. When I go test the website I get the following error and there lies my question. How can I get around this error?
http://localhost/reportserver
Reporting Services Error
--------------------------------------------------------------------------------
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Method not found: 'Void Microsoft.ReportingServices.Diagnostics.UserUtil.CleanCurrentUserName()'.
--------------------------------------------------------------------------------
SQL Server Reporting Services
Any help would be greatly appreciated.
I found the solution to my issue by pure chance. It looks like the SP3 upgrade only upgraded the last reporting services instance that was installed. So I had to manually copy the files under:
C:\Program Files\Microsoft SQL Server\MSSQL.9\Reporting Services\ReportServer
to the other instances. This seemed to fix the missing reference issue. I work with Microsoft products and defend them every day, but some of their developer tool install files are just wonky and ill packaged.