I would like to connect SQl server DB in VM using my local sql server management studio.
What should I need for server name ?
Can I use my server Windows authentication for VM in my local ?
Create an empty text file on your VM and give it extension .udl
Doubleclick on it now you can set the properties easy from combobox
Adjust the properties and click on "test connection" until it works
Now open the file in notepad and there you see a complete connection string.
Note that for SQL Server authentication you need to configure the protocol in SQL Server Configuration Manager
When you are in Management studio on your local machine, you will need the hostname or IP address of the VM.
For Windows Authentication, you will need an account on the local domain that both your workstation and the database VM are connected to.
For SQL server authentication, you will need an account in the SQL Server instance.
In both cases, security will need to be configured and associated with your account.
Are you on a domain, or is this just a private server?
Use name of the VM where SQL server is running.
And yes, you can use Windows authentication. Depending on your domain settings.
This will help you How to: Create a SQL Server Login It is not much difference from SQL login.
And if you are in Administrators group on machine running SQL Server, then your login already should be included.
And if your machine with Management Studio and server with SQL Server are in different domains, then you will need to run Management Studio under different account
runas /netonly /user:domain\username "c:\path\ssms.exe"
See Connect to SQL Servers in another domain using Windows Authentication
Related
I have looked everywhere on Stack Overflow and I have not found an answer that closely compares to my scenario, so please bear with me.
The issue is I was recently given a development server at work and I have to migrate my current project (which I have on SQL Server Management Studio running on SQL Server Express) so that it is hosted on that server. I was just given the server name and authorized access to it. So I can connect to it through Remote Desktop Connection (RDC), but I am clueless as to where to go from here.
I have tried going in through RDC and opening Management Studio from there but when plugging in my server name and using Windows Authentication it doesn't let me in. And I can't use SQL Server Authentication because I'd have to be actually in to be able to create an SQL login.
How can I connect to this server through Management Studio?
The server is in the same network? In the management studio, in server name, you can put a IP address or computer name.
Do you know if SQL is even installed on the server you are tasked to deploy to? You are able to "connect" to SQL Express locally because the instance is installed on your local machine. You will need an instance of SQL installed on the remote machine to be able to use SSMS to connect to the remote instance.
If you are attempting to connect to an already created DB that you have been using the credentials are the same, if you know the address and you have the ports opened on your computer to allow the connection. If you are going to start a new DB on the server, then you will have to connect via AD credentials IF your admin has given you the proper access. I personally suggest using AD credentials to create connections, it's just a lot more secure.
If you are trying to connect to the local db, then it should be on the drop down list on the log in screen.
You are going to have to talk with your admin who set it up if you are still having problems.
You might have to Enter your Server Details in the Hosts File on the Current Application Server
For Accessing Hosts File,
Go to Run and type drivers and Hit Enter. Go to the etc Folder and you will see hosts file in the Folder.
At the End of the File Enter the Server IP And Server Name
Save the file and try Logging into the Server Management Studio again
Hopefull, this would help
I just created a new SQL Server 2014 VM from Windows Azure gallery. I did remote login into VM , on trying to login into DB with Windows Authentication mode, I get below error:
Login failed for user 'dbserver\dba1'. (.Net SqlClient Data Provider)
Are there any specific steps, which I have to follow for new SQL Server DB login to work properly?
P.S. I have opened port 1433 into windows firewall, it did not help, althoug that should not be required for logging in directly from VM.
I guess Azure VM is not joined to domain. This means that only SQL authentication will work against this SQL Server instance. You might need to do the following:
Enable Mixed authentication on the SQL Server
Add a user mapped to SA role (or enable SA and set its password, but having separate user is better)
Open port 1433 (you did this already)
Make sure SQL is listening on this port (should be already)
In case you connecting outside of the same Azure Cloud Service - make sure you have endpoint created for the VM. Highly recommended to use port different from 1433 as the endpoint public port.
Don't forget to specify port if it is not standard, SQL connection string expects comma for it (i.e. myvmpublicname.cloudapp.net,12345)
You can check this article for more details
I was getting connection inside the VM using MSSQL Server, but not from outside. After reading some comments, I found that I needed to add a specific port for outgoing traffic and added that port at Azure firewall:
Here are the steps to check is it working for you or not:
Start Sql Server configuration Manager
Click on your Server name
Click SQL Server network config
Click on protocols
Click on TCP/IP
At the end of tcp/IP range set your port, I set 1433.
Please restart SQL Database.
Now open port at Azure management portal. And conntect through SQL tools or other services.
And also remember to open windows firewall.
It most likely installed another windows user as the admin for the SQL Database. If you know what that user is, login as them.
Otherwise, did you manage to set up the SQL in mixed mode and have an sa password. If so, login with that then add the Windows Account.
If not, try Forgot SQL Server Password to reset the sa password and get access that way.
I am new to SQL server, I want to connect my SQL Server(Management Studio) to a network SQL Server, How can I do that??
Enter your server, username, and password.
You can use windows authentication etc. What in particular are you finding hard about connecting to your particular server?
When you open the management studio, it should have a spot to specify the hostname and credentials you want to connect with. Just enter the remote server name and credentials to connect with and that should be it (assuming the remote server allows remote connections).
Since you want use the Network Server, You need to check 2 things for Windows Authentication you need to have the access to the remote machine means you should be able to connect remotely using mstsc command. And the second if you are using SQL server authentication then check the functional id which you are using is correct or not. If this 2 things satisfy you can connect any remote server from your machine.
I have installed SQL Server 2008 R2 Express on a Windows Server 2008 R2 machine, and now when I want to open that database using SQL Server Management Studio on the client machine it fails to open.
But the database opens normally on the server.
The owner of the database is sa and on client I am logged in with windows authentication.
How to resolve this error??
the server priciple smtech/prabhu is not able to access the database
the user is of client under the server domain
I suggest making sure that the account you are trying to connect with actually has access.
Log onto the server, open up management studio, look in object explorer. There should be a Security folder icon in the treeview, Expand that and the Logins folder.
If the user you are trying to connect with isnt present you may need to add it.
Other than this instead of connecting with windows authentication maybe try connect with SQL Server Authentication as the SA user?
Is both Client and DB sever are on SAME domain ?? If not, then I think Windows Authentication will not work for you.
(As already suggested in above answer) create a SQL Login try with to connect DB from Client using that Login.
If both machine are on same domain and still you are not able to connect server, then few things you can check,
Can your client actually "see" this server over network ??
Most common reason is firewall. By default SQL Server communicates from port 1433 and 1434. Try to see if this MSDN link helps
Make sure that your SQL Server instance is configured to communicate using TCP/IP. This can be configured from SQL Server Configuration Manager.
I want to connect my db on SQL Server 2008 over local area network I want to put it on one computer on the LAN so any computer on the network can access it what should I do please give me correct steps
In a Client-Server scenario, you will have the SQL Server installed on your server machine.
Clients will be the computers accessing that SQL Server using a client software (can be SQL Server Management Studio, web/forms application, Excel worksheet, etc).
Each of the client will provide you a way of making a connection to the SQL Server Instance running on the server. From server you will need IP Address or Servername along with SQL Server Instance name. They both combined form host name.
Data Source = ServerName\InstanceName
Note: Instance name not required for default instance.
User name: You need to add user from domain or a sql server authenticated user under security tab (SSMS) on the SQL Server.
Password: Corresponding password.
Note: Once you add a user to SQL Server Instance, do not forget to attach the user to databases you want the user to access and provide appropriate role(s).
Install SQL Server 2008 on one machine on your LAN (let's call it SQLServer)
Connect that machine to the LAN (network cable)
You're done.
Now, all other computers can connect to that SQL Server machine by its name in the connection string - in .NET, that would look like:
server=SQLServer;database=YourDatabase;User ID=YourUser;Pwd=top$Secret