In SQL Server Database Engine I have a table named Table A.
I deleted the table using graphical interface, but when I wanted to create a table with same name, the error shows
The object already exists
What is the remedy of this situation?
The following steps should help you track down what is going on and help you create your table:
Right-click on your database and select refresh
Verify that your table does not exist under this database.
If you table is
not shown here, then very likely your table is displayed under the
master database.
To create a table in your selected database,
first select the database and then run your query.
A better
option for number 4, just to be sure you are specifying the correct
database is to run the command use dbname; (where dbname is
the name of your database). Do this on the line above your create table code.
Related
I made a stored procedure which I want to store the results of it in a "temporary table"
I named the table
#SalesDiff
HOWEVER,
the title of table under temporary tables folder is shown as
#SalesDiff___________________________________________________________00000000023F
Below is basic query format
SELECT * INTO #SalesDiff FROM (
SELECT A, B, C
FROM
(.... ) D
Temporary tables only exist for the lifespan of the connection that creates them. When the SQL engine creates your table for you, it appends information to the end to distinguish your version of #SalesDiff from the version generated by the other three users running the same stored procedure.
Within your connection, the engine keeps track of the version information automagically, so you don't need to worry about the extension.
I want to create a new table with one of the columns linked/updated by a table on another database (but on the same server).
so when table A column is updated it will automatically update table b's column with the same information no data will be entered into this column from table b.
I have tried various different ways but can't find a way to do this with out updating column manually or setting up a server agent any help would be great.
if you want to make cross server query, please check sp_addlinkedserver
https://msdn.microsoft.com/en-us/library/ms190479.aspx
Once it is linked, just create a trigger, where you can use
select * from [server].[database].[schema].[table]
On our original design we screwed up a foreign key constraint in our table. Now that the table is full of data we cannot change it without dropping all of the records in the table. The only solution I could think of is to create a backup table and put all of the records in there, then delete all the records, alter the table and start adding them back. Any other (BETTER) ideas? Thanks!
Using MS SQL Server
I'm a bit late, just for reference.
If You are using SQL Server Management Studio, You could generate a DROP and RECREATE script with "Keep schema and data" option.
Right click on the desired DB in object explorer
Tasks > Generate scripts
Select the table you want to script
Then clicking on Advanced button
"Script DROP and CREATE" ->"Script DROP and CREATE"
"Types of data to script" -> "Schema and data"
Hope this helps
Here's some pseudo-code. No need to make a backup table, just make a new table with the right constraint, insert your records into it, and rename.
CREATE TABLE MyTable_2
(...field definitions)
<add the constraint to MyTable_2>
INSERT INTO MyTable_2 (fields)
SELECT fields
FROM MyTable
DROP TABLE MyTable
exec sp_rename 'MyTable2', 'Mytable'
Using SQL Server Management Studio (SSMS), you can use it's table designer to specify the final condition of the table. Before saving the changes, have it generate the change script and save that script. Cancel out of the design window, open the script and review it. SSMS may already have generated a script that does everything you need, fixing the primary-foreign key relationship while preserving all existing data. If not, you will have a script, already started, that performs most of what you need to do and should be able to modify it for your needs.
This is your only solution.
Create the backup table, empty the original one, modify the table and then insert step-by-step until you find a violation.
Update All Schema Database Old by new Schema Database .
Create script (Right click on the desired DB in object explorer Tasks > Generate scripts -> select option select specific database objects and tables ->next -> advanced-> option Type of data to script Data only -> ok ->next ->next.) to data only and backup Database to old database
Drop database old and create new database and make new DB is empty .
Excute script of Old Data only on new database .
I am trying to insert data from one table to another with same structure,
select * into tbltable1 from tbltable1_Link
I am getting the following error message:
There is already an object named 'tbltable1' in the database.
The SELECT INTO statement creates a new table of the name you provide and populates it with the results of the SELECT statement.
I think you should be using INSERT INTO since the table already exists. If your purpose is in fact to populate a temporary table, then you should provide a table name that does not already exist in the database.
See MSDN for more information on this.
If you are confident that tbltable1 is not required, you can drop the table first.
You may also want to consider using temporary tables...
Select * into ##MyTemporaryTable FROM tblTable1_Link
You can then use the temporary table in this session. (Ending the session should drop the temporary table automatically, if I remember correctly. It's been a while since I've worked with SQL Server).
I have a database called foo and a database called bar. I have a table in foo called tblFoobar that I want to move (data and all) to database bar from database foo. What is the SQL statement to do this?
SQL Server Management Studio's "Import Data" task (right-click on the DB name, then tasks) will do most of this for you. Run it from the database you want to copy the data into.
If the tables don't exist it will create them for you, but you'll probably have to recreate any indexes and such. If the tables do exist, it will append the new data by default but you can adjust that (edit mappings) so it will delete all existing data.
I use this all the time and it works fairly well.
On SQL Server? and on the same database server? Use three part naming.
INSERT INTO bar..tblFoobar( *fieldlist* )
SELECT *fieldlist* FROM foo..tblFoobar
This just moves the data. If you want to move the table definition (and other attributes such as permissions and indexes), you'll have to do something else.
This should work:
SELECT *
INTO DestinationDB..MyDestinationTable
FROM SourceDB..MySourceTable
It will not copy constraints, defaults or indexes. The table created will not have a clustered index.
Alternatively you could:
INSERT INTO DestinationDB..MyDestinationTable
SELECT * FROM SourceDB..MySourceTable
If your destination table exists and is empty.
If it’s one table only then all you need to do is
Script table definition
Create new table in another database
Update rules, indexes, permissions and such
Import data (several insert into examples are already shown above)
One thing you’ll have to consider is other updates such as migrating other objects in the future. Note that your source and destination tables do not have the same name. This means that you’ll also have to make changes if you dependent objects such as views, stored procedures and other.
Whit one or several objects you can go manually w/o any issues. However, when there are more than just a few updates 3rd party comparison tools come in very handy. Right now I’m using ApexSQL Diff for schema migrations but you can’t go wrong with any other tool out there.
Script the create table in management studio, run that script in bar to create the table. (Right click table in object explorer, script table as, create to...)
INSERT bar.[schema].table SELECT * FROM foo.[schema].table
You can also use the Generate SQL Server Scripts Wizard to help guide the creation of SQL script's that can do the following:
copy the table schema
any constraints (identity, default values, etc)
data within the table
and many other options if needed
Good example workflow for SQL Server 2008 with screen shots shown here.
You may go with this way: ( a general example )
insert into QualityAssuranceDB.dbo.Customers (columnA, ColumnB)
Select columnA, columnB from DeveloperDB.dbo.Customers
Also if you need to generate the column names as well to put in insert clause, use:
select (name + ',') as TableColumns from sys.columns
where object_id = object_id('YourTableName')
Copy the result and paste into query window to represent your table column names and even this will exclude the identity column as well:
select (name + ',') as TableColumns from sys.columns
where object_id = object_id('YourTableName') and is_identity = 0
Remember the script to copy rows will work if the databases belongs to the same location.
You can Try This.
select * into <Destination_table> from <Servername>.<DatabaseName>.dbo.<sourceTable>
Server name is optional if both DB is in same server.
I give you three options:
If they are two databases on the same instance do:
SELECT * INTO My_New_Table FROM [HumanResources].[Department];
If they are two databases on different servers and you have linked servers do:
SELECT * INTO My_New_Table FROM [ServerName].[AdventureWorks2012].[HumanResources].[Department];
If they are two databases on different servers and you don't have linked servers do:
SELECT * INTO My_New_Table
FROM OPENROWSET('SQLNCLI', 'Server=My_Remote_Server;Trusted_Connection=yes;',
'SELECT * FROM AdventureWorks2012.HumanResources.Department');