the default url address of the workbench is http://localhost:7200
I want to change it to this: http://localhost:7200/graphdb
Is it possible? How can I configure it?
Greetings
From the question, it's not clear what's the motivation to run the GraphDB under a different URL address. The short answer is you cannot do this. A hack, which is not guaranteed to work in the next future versions is to use the deprecated generate war script from an older distribution. After downloading the link, copy the file bin/generate-war-files to your current version and execute it. The generated WAR file may be deployed in Apache Tomcat name under whatever name you want.
Related
I've been strugling for a couple of days with this problem, but can't seem to fix it, I think I'm almost there.... but... not quite :(
This is where I am at.
I'm on a headless debian server, running virtualmin / webmin for creating my domains / users etc. I don't know if this will mess things up, but I'm happy to modify the config files manually (via webmin or via ssh/vim).
I am attempting to run fossil as a cgi service over apache.
its an internal site, named as homeserver.net I can reach the default pages just fine, and add in and create links etc as I want to.
Please note that the solution to my problem is at the end of the question.
so the files are located on disk at, which tallys up with my apache document root
/home/homeserver/www
I would like to run fossil to have both the internal site, and later on and dev work that I practice on in separate files. So I created a new directory for these repositories.
/home/homeserver/repos/web/site.fossil
/home/homeserver/repos/dev/ [no repository yet!]
reading the instructions on the fossil page I have inserted a short cgi file called 'fos_repo.cgi' that reads as.
#!/usr/bin/fossil
directory: /home/homeserver/repos
notfound: http://www.homeserver.net/site404.htm
when I open the link to
www.homeserver.net/cgi-bin/fos_repo.cgi
I get redirected to the 404 page that I have written. So the script is clearly being read and working.
From reading the fossil pages I understand that I should be able to use the following link to open/access the repo.
www.homeserver.net/cgi-bin/repos/web/site
I'm not sure why this isn't working...
so far I have tried the following.
I opened the repository from the cli, and had the server run in the background
fossil server site.fossil &
I though maybee the file should have been inside the main repo directory, not inside a sub directory, so I moved it... it now lives in
/home/homeserver/repos/site.fossil
I tried creating an alias to the file in apache
Alias /home/homeserver/repos/web/site.fossil /home/homeserver/www/repos
When I browse to
www.homeserver.net/repos/site
I get nothing, but going to
www.homeserver.net/repos/site.fossil
will attempt to downloaded the file (which is a binary)
so I think I'm getting somewhere, but I'm not sure what I'm missing.
I've used fossil before, but I ran it as a local server, and started it up as and when I needed it.
I'm running it like this so as I can eventually push the site out to a live VPS (maybe even finish up hosting the fossil site on the VPS also).
ps I really liked fossil when I used it before, and loved the whole integrated wiki and bug tracker, and the fact I could simply copy the file to my external drive to do a backup. Personally don't really want to change to something else, but if I have to....
thanks in advance.
David
Edit: trying other options.
So I thought I would try the single repository method shown on the fossil page, so adjusted my cgi script accordingly.
Now when I navitage to : www.homeserver.net/cgi-bin/fos_repo.cgi I get the following message returned
SQLITE_CANTOPEN: cannot open file at line 30276 of [f5b5a13f73]
SQLITE_CANTOPEN: os_unix.c:30276: (21) open(/home/homeserver/repos)
however if I ssh to the server an start it manually with
fossil server site.fossil
I can get to the server with www.homeserver.net:8081
So I either have a problem with my SQLite usage in apache or something else wrong. Plesse help
Solution
So for reasons of simplicity I've decided that using a single cgi file for each repo is what I am going to go with.
My initial directory structure was as follows:
/home/homeserver/www
/home/homeserver/www/repos
/home/homeserver/www/repos/web # for web site development
/home/homeserver/www/repos/dev # for other development
I think part of my problem was that I was hoping that having the directory: pont to my repos/ location fossil would find the site.fossil file (located in repos/web) and the dev.fossil file (located in repos/deb).
Obviously this didn't work.
The reason I wanted it too look like this was for separation of the information on my system.
For some reason I had decided that pointing fossil as repos/ would give me a nice fossil style front page and links to my repositories automatically. However After having used the directory: version and getting the following error message
Unable to find or open the project repository
I realised that I was still going to need to write my front page to the repositories, and that my expectation was a little too much.
So I've decided to run with a single cgi file pointing to each repo that i need to make.
Instead of
www.homeserver.net/cgi-bin/repos/web/site
try
www.homeserver.net/cgi-bin/repos.cgi/index
Reading your ( very long ) question again, I suggest trying
www.homeserver.net/cgi-bin/fos_repos.cgi/index
I am currently setting up a new dev environment, and have come to the final stage where I am trying to run a build.
However, one of the ANT targets is trying to create a directory, which is currently set to "C:\workspace\domains\Online" however for security reasons (they say anyway...) we do not have full access to the C: drive, so I have my domain setup in an alternate location. Where is this Domain Home/Root variable kept?
Well in my own domain there is in file <domain>/bin/setDomainEnv.bat the following line:
set DOMAIN_HOME=D:\Oracle\Middleware\user_projects\domains\domain_name
However since you are using some Ant build file to create your domain, maybe something is hardcoded in them or is one of the properties passed to this file.
An ANT build file that had been supplied by somebody else had been hardcoded! Not sure why they couldn't follow the convention! It just so happened that the location that had been hardcoded was the same as my old workspace, thus the confusion.
Thanks all.
I am changing some of my PHP settings such as upload size limit etc.
I manage to increase my upload size limit with some modifications to my Loaded Configuration File: php5.ini.
So it is the right file, and changes to php5.ini takes effect.
I want to enable ldap extension too. However, i couldnt do that. I added the following line:
extension=php_ldap.dll
But it did not take any effect.
Can anybody see why?
Thanks!
If you're on Linux, adding a dll extension won't do much good since these are used by Windows.
You'd rather have to enable the .so extension.
But then again just uncommenting or adding this entry in your php.ini doesn't make the extension work automatically, it will work only if the given .so file is really there and is in the right path, resp. the path is configured correctly.
If you're on Linux and you've got a chance, you should install extensions via your package manager (apt, yum, ...) which will compile the extension into your php installation. This way you won't loose your extension after server updates which include php.
If you don't have access to your server, there is always something you can do!
a) Ask the hosting provider to enable the extension for you, good hosting providers do that.
b) Get a VPS. You'll be so much better off!! It's worth it! Check out ServerGrove!
In order for camel to connect to a remote host, it needs to already have seen the fingerprint of the host and record it in a known_hosts file, just like .ssh/known_hosts .
I get the setting from this file from a field in a database which is too small to contain the complete url... If I could symbolic link the .ssh file to the default location where the sftp endpoint is looking, I would not have to specify it in the URL and the url will fit in the column and life will be beautiful.
The question is where does camel expects this file to be?
I digged somewhat deeper and the answer is : null, there is no default.
The parameter is defined but not initialised to anything. In newer versions of Camel this is less of an issue because the checkKnownHosts option is turned off. In older version the default is ask, which is rather silly for something which is supposed to run unattended.
So I'm not sure what the best way to accomplish this is, but basically I have a laptop that I use at work for Maven projects. It works fine when I'm at work, but as soon as I walk out of the door of their corporate proxy and maven server, I often have to do alot of hand-fudging of the settings.xml file when I'm at home if I'm not VPN'ed in:
We have a corporate-installed Maven Repository proxy server to store some of our own artifacts and handle being the middle-man for our commonly used artifacts.
We have an http proxy that we use for connecting to the outside world.
Both configurations have been handled by my settings.xml file for setting a single Nexus group and maven proxies. If I'm not connected to the VPN while away from the office, I have to muck around with the settings.xml each time I'm not on it, then switch it back when I am on it.
What solutions have anyone else found to handle this? I've been trying profiles to manage the proxy, but I can't seem to get it to work correctly, and it's starting to look pretty ugly. Are there some settings configurations that can detect when I'm not behind the proxy at work and not use the corporate proxy server or Maven server?
While I can think of some profile based solution to handle the proxy (basically, reading the <active> value from a property defined in a profile), this wouldn't be fully automated (the profile activation do not support network based stuff) unless you can find a file that is present or not depending on your location (in which case, you could use an existing/missing file trigger but this is kinda hacky). Anyway, this would solve only one part of the problem because mirrors can't be declared in profiles (see MNG-3525).
So, instead of trying to control this with a profile, my suggestion would be to use two settings.xml and to pass your settings-home.xml file with the -s command line option when you're at home.
Another option would be to automate the changes in your settings.xml with a script (Groovy would be a good choice as someone reported in MNG-3525).
I found a use environment variables to set nonProxyHosts together with proxy and noproxy shell aliases to be the most convenient solution when switching between networks with proxy and without it.
In settings.xml, configure proxy with
<host>proxy.corporation.int</host>
<port>8080</port>
<nonProxyHosts>${env.MAVEN_NONPROXY}</nonProxyHosts>
Then in ~/.profile set
export MAVEN_NONPROXY_PROXY='*.corporation.int|local.net|some.host.com'
export MAVEN_NONPROXY_NOPROXY='*'
alias proxy="export MAVEN_NONPROXY=\"$MAVEN_NONPROXY_PROXY\" && export all_proxy=http://proxy.corporation.int:8080"
alias noproxy="export MAVEN_NONPROXY=\"$MAVEN_NONPROXY_NOPROXY\" && unset all_proxy"
To do the switch when roaming, you would just execute from a shell:
[me#linuxbox me]$ proxy
or
[me#linuxbox me]$ noproxy
Obviously, both aliases proxy and noproxy can include much more changes than just setup of MAVEN_NOPROXY and all_proxy.
I was frustrated by the same problem: having to manually edit settings.xml when roaming between networks. So much in fact, that I wrote a Maven plugin that enables automatic discovery of proxy settings. The current implementation uses the proxy-vole library written by Bernd Rosstauscher to detect proxy settings based on OS configuration, browser, and environment settings.
I've just released the source code of the plugin on Github, under an Apache 2.0 license: https://github.com/volkertb/autoproxy-maven-plugin
You're welcome to give it a try and to see if it meets your needs. Any feedback or contributions are welcome!
(Note: you don't necessarily have to add the plugin to your project's POM. You can invoke it from the command line as well, after you've installed it. See the README on the site for more details.)
You can set MAVEN_OPTS when you need to activate a proxy:
export MAVEN_OPTS="-Dhttp.proxyHost=my-proxy-server -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=*.my.org -Dhttps.proxyHost=my-proxy-server -Dhttps.proxyPort=80 -Dhttps.nonProxyHosts=*.my.org"