I just created a personal GitLab account and am trying to follow the steps on
https://gitlab.com/help/ssh/README
to deploy my SSH key to GitLab. I've completed up to step 5, and see my SSH key among 'Your SSH keys' in my User Settings -> SSH keys:
I'm trying to now complete the optional 6th step, testing the key:
My GitLab username is khpeek, so I guessed my 'GitLab domain' is gitlab.com/khpeek. However, the test command
ssh -T git#gitlab.com/khpeek
yields an error message:
ssh: Could not resolve hostname gitlab.com/khpeek: Name or service not known
Apparently this is the wrong hostname. What would be the right one?
If you're using Gitlab on gitlab.com then the domain is simply gitlab.com so you should run ssh -T git#gitlab.com
Go to clone with ssh. And check the URL link. It should looks like this. git#hostname:project.git. git#hostname this whole part is your hostname.
Open your GitLab account or repository online (any site will do, just make sure your logged in). Then checkout the URL. The domain together with the TLD will be your hostname. E.g.
www.gitlab.your.institution.com/...
So in this case gitlab.your.institution.com is your hostname.
Related
Here is my situation. I want to access a server through a jumpbox/bastion host.
so, I will login as normal user in jumpbox and then change user to root after that login to remote server using root. I dont have direct access to root in jumpbox.
$ ssh user#jumpbox
$ user#jumpbox:~# su - root
Enter Password:
$ root#jumpbox:~/ ssh root#remoteserver
Enter Password:
$ root#remoteserver:~/
Above is the manual workflow. I want to achieve this in ansible.
I have seen something like this.
ansible_ssh_common_args: '-o ProxyCommand="ssh -W %h:%p -q user#jumpbox"'
This doesnot work when we need to switch to root and login to remote server.
There are a few things to unpack here:
General Design / Issue:
This isn't an Ansible issue, it's an ssh issue/proxy misconfiguration.
A bastion host/ssh proxy isn't meant to be logged into and have commands ran directly on it interactively (like su - root, enter password, then ssh...). That's not really a bastion, that's just a server you're logging into and running commands on. It's not an actual ssh proxy/bastion/jump role. At that point you might as well just run Ansible on the host.
That's why things like ProxyJump and ProxyCommand aren't working. They are designed to work with ssh proxies that are configured as ssh proxies (bastions).
Running Ansible Tasks as Root:
Ansible can run with sudo during task execution (it's called "become" in Ansible lingo), so you should never need to SSH as the literal root user with Ansible (shouldn't ssh as root ever really).
Answering the question:
There are a lot of workarounds for this, but the straightforward answer here is to configure the jump host as a proper bastion and your issue will go away. An example...
As the bastion "user", create an ssh key pair, or use an existing one.
On the bastion, edit the users ~/.ssh/config file to access the target server with the private key and desired user.
EXAMPLE user#bastion's ~/.ssh/config (I cringe seeing root here)...
Host remote-server
User root
IdentityFile ~/.ssh/my-private-key
Add the public key created in step 1 to the target servers ~/.ssh/authorized_keys file for the user you're logging in as.
After that type of config, your jump host is working as a regular ssh proxy. You can then use ProxyCommand or ProxyJump as you had tried to originally without issue.
I'm trying to use gitlab CI/CD to auto deploy my code, after push on an specific branch (in my case 'staging' branch)
after push on 'staging' branch I see following error on jobs section in gitlab UI:
Running with gitlab-runner 15.0.0 (xxxxxx)
on deploy xxxxxx
Preparing the "ssh" executor
00:36
Using SSH executor...
ERROR: Preparation failed: ssh command Connect() error: ssh Dial() error: ssh: handshake failed: knownhosts: key is unknown
I can see gitlab from my VM and gitlab-runner registered successfully before.
I've also created ssh key and add it to gitlab-runner installation steps.
You need to check what SSH URL is used in your case.
Something like git#gitlab.com:me/myProject would look for gitlab.com SSH host keys fingerprints in an ~/.ssh/known_hosts file.
Make sure to add first in gitlab-runner server the following to ~/.ssh/known_hosts:
gitlab.com ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAfuCHKVTjquxvt6CM6tdG4SLp1Btn/nOeHHE5UOzRdf
gitlab.com ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCsj2bNKTBSpIYDEGk9KxsGh3mySTRgMtXL583qmBpzeQ+jqCMRgBqB98u3z++J1sKlXHWfM9dyhSevkMwSbhoR8XIq/U0tCNyokEi/ueaBMCvbcTHhO7FcwzY92WK4Yt0aGROY5qX2UKSeOvuP4D6TPqKF1onrSzH9bx9XUf2lEdWT/ia1NEKjunUqu1xOB/StKDHMoX4/OKyIzuS0q/T1zOATthvasJFoPrAjkohTyaDUz2LN5JoH839hViyEG82yB+MjcFV5MU3N1l1QL3cVUCh93xSaua1N85qivl+siMkPGbO5xR/En4iEY6K2XPASUEMaieWVNTRCtJ4S8H+9
gitlab.com ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBFSMqzJeV9rUzU4kWitGjeR4PWSa29SPqJ1fVkhtj3Hw9xjLVXVYrU9QlYWrOLXBpQ6KWjbjTDTdDkoohFzgbEY=
That will skip manual fingerprint confirmation in SSH.
In other words, no more "knownhosts: key is unknown".
Note that with GitLab 15.3 (August 2022), you will have an easier time finding those:
New links to SSH fingerprints
Your GitLab SSH fingerprints are now easier to find, thanks to new links on the SSH configuration page and in the documentation.
Thank you Andreas Deicha for your contribution!
See Documentation and Issue.
For people who still encounter this issue: in our case the cause was a difference between the host name in the known_host file and the one in the toml file. They must be both fully qualified or both non qualified.
I have a site on CyberPanel, user "thows3051" and want to use git to manage my site. But when I try ssh -T git#github.com I get git#github.com: Permission denied (publickey)..
If I ssh into the server on that user ssh thows3051#mysite.com, into the .ssh directory, there is a thows3051.pub file which I copied the contents into the repo on github under "deploy keys".
EDIT
Was able to explicitly use the correct key with ssh -i ~/.ssh/thows3051 -T git#github.com which shows You've successfully authenticated....
So my question is why isn't the user using the right ssh key?
Thanks in advance
Was able to fix it. I'm not sure what key was being used, if any?
But if you create a file in ~/.ssh/config, you can put the following inside:
IdentityFile ~/.ssh/thows3051
And it will use that key.
Note that you can set specific keys for certain hosts, for example:
Host github.com
IdentityFile ~/.ssh/github.key
I can connect using these credentials through ftp but not through ssh.
Timothy#ement MINGW64 ~
$ ssh timothy#mywebsite.com
ssh: connect to host mywebsite.com port 22: Connection timed out
I'm sure this question has been asked a million times before. Does it have anything to do with ssh keys?
I'm using siteground and in the ssh/shell access area i've added this:
t r timothy#mywebsite.com KtV/T4QvP4K9n7Zki9n+ZWp6 0.0.0.0/0 - ALL Remove Key | Add IP | Private Key
any help would be appreciated. Thank you.
Does it have anything to do with ssh keys?
Yes: see the official SiteGround documentation How to use SSH.
you need to enable ssh access and register your public ssh key.
then you can use ssh (provided in your <path-to-git>/usr/bin) in order to access
ssh -p18765 <user>#yourdomain
SiteGround chooses to run its sshd on port 18765, not the default 22.
The siteground tutorials are junk, two out of the three chat support staff I spoke with just referred me to the tutorials when I was attempting to make a connection to my siteground server over ssh.
These are the steps that finally worked:
From the cPanel Advanced section select SSH/Shell Access
Generate a new key using their utility (make note of the password you used for later use).
*** They have a tutorial that should allow you to create a private key on linux then upload the public key to their site. That is "not recommended" and I was unable to get that to work.
Once you have their key listed in the current keys table click the Private Key link
Copy the Private Key to a file in your local .ssh directory (make sure the mask is 0600)
run the following command:
ssh-add
enter the passphrase you used when generating the key using their utility
If you get a response "Identity added: ..." you are all set
you should now be able to use the command:
ssh # -p18765
It doesn't look like they have X11 forwarding enabled though so if you use ssh -X you will get:
X11 forwarding request failed on channel 0
I'm sorry to have to ask this question, but I feel like I've tried every answer so far on SO with no luck.
I have my local machine and my remote server. Jenkins is up and running on my server.
If I open up terminal and do something like scp /path/to/file user#server:/path/to/wherever then my ssh works fine without requiring a password
If I run this command inside of my Jenkins job I get 'Host Key Verification Failed'
So I know my SSH is working correctly the way I want, but why can't I get Jenkins to use this SSH key?
Interesting thing is, it did work fine when I first set up Jenkins and the key, then I think I restarted my local machine, or restarted Jenkins, then it stopped working. It's hard to say exactly what caused it.
I've also tried several options regarding ssh-agent and ssh-add but those don't seem to work.
I verified the local machine .pub is on the server in the /user/.ssh folder and is also in the authorized keys file. The folder is owned by user.
Any thoughts would be much appreciated and I can provide more info about my problem. Thanks!
Update:
Per Kensters suggestion I did su - jenkins, then ssh server, and it asked me to add to known hosts. So I thought this was a step in the right direction. But the same problem persisted afterward.
Something I did not notice before I can ssh server without password when using my myUsername account. But if I switch to the jenkins user, then it asks me for my password when I do ssh server.
I also tried ssh-keygen -R server as suggested to no avail.
Try
su jenkins
ssh-keyscan YOUR-HOSTNAME >> ~/.ssh/known_hosts
SSH Slaves Plugin doesn't support ECDSA. The command above should add RSA key for ssh-slave.
Host Key Verification Failed
ssh is complaining about the remote host key, not the local key that you're trying to use for authentication.
Every SSH server has a host key which is used to identify the server to the client. This helps prevent clients from connecting to servers which are impersonating the intended server. The first time you use ssh to connect to a particular host, ssh will normally prompt you to accept the remote host's host key, then store the key locally so that ssh will recognize the key in the future. The widely used OpenSSH ssh program stores known host keys in a file .ssh/known_hosts within each user's home directory.
In this case, one of two things is happening:
The user ID that Jenkins is using to run these jobs has never connected to this particular remote host before, and doesn't have the remote host's host key in its known_hosts file.
The remote host key has changed for some reason, and it no longer matches the key which is stored in the Jenkins user's known_hosts file.
You need to update the known_hosts file for the user which jenkins is using to run these ssh operations. You need to remove any old host key for this host from the file, then add the host's new host key to the file. The simplest way is to use su or sudo to become the Jenkins user, then run ssh interactively to connect to the remote server:
$ ssh server
If ssh prompts you to accept a host key, say yes, and you're done. You don't even have to finish logging in. If it prints a big scary warning that the host key has changed, run this to remove the existing host from known_hosts:
$ ssh-keygen -R server
Then rerun the ssh command.
One thing to be aware of: you can't use a passphrase when you generate a key that you're going to use with Jenkins, because it gives you no opportunity to enter such a thing (seeing as it runs automated jobs with no human intervention).