For work I need to create a resource management excel file. My goal is to create an overview as is seen here:
If John would have taken a few hours off, or if he has a fey hours of sick leave, I would like to turn this cell only to change colour so I know that John will be absent for whatever reason on this day.
However, since I'm creating this for an entire row (for a whole year), I do not want to create conditional formatting per cell because that would be plain madness.
Here is an example per employee (in this example John):
enter image description here
So what I need is a formula to check if a cell in a row (for example sick leave) on the employee worksheet is grater than 0 and then change the colour of only the corresponding cell on the recourse planning worksheet, not the entire row.
Does any of you guys know if this is possible in excel 2016? Preferably without VBA scripting since I have to transfer this excel file to a co-worker who is not into VBA programming.
Thank in advance.
Nuntius transmittendus!
This is definitely possible without any code. Use CountIf() as tinus087 commented. The tricky part is how to create the address range used by the CountIf() so that you can put one conditional format on all the cells. On the the one hand you need the column of the cells being checked to match the column of your total cell. On the other hand the worksheet tab name needs to change depending on which row you are on. So use INDIRECT() to point to the correct worksheet and OFFSET() to look at the correct cells.
So, for cell C4, the formula you want to use as the range in your CountIf() is OFFSET(INDIRECT($A4&"!A1"),3,COLUMN(C1)-1,4). When applied to cell C4 this creates address John!C4:C7. When used for cell D4, it results in John!D4:D7.
You'll probably want some error checking to deal with the #REF! error happens when the formula is applied to a row without a first name or where the name listed doesn't match any worksheet tabs.
Something else to think about, if you haven't already, what happens if there are two John's? Is the 2nd John going to be named John2?
I have a spreadsheet, where I'd like to drag down a particular index/match formula, but where the formula does not return a value, I'd like it to keep the formula that is already in place (which sums up a few of the items below it).
I know that you could just use the cell reference for the if_error part of the formula, but this would return the value of the cell as it is now, and wouldn't use the current formula to generate a new value based on the values returned by the index match formula.
I have attached pictures below. Basically, I want to leave the sum formulas as is, but just be able to drag down that first index formula (the actual spreadsheet I'm dealing with has many different spaces, and is very long, otherwise I'd just copy the formula manually).
If this isn't possible, are there any other solutions? Another thing I tried was for each index/match that didn't return a value, I had it return the formula as a string, and then I'd copy/paste special with values, replace the column in the formula that is a string to the column I'm looking for, and then it would evaluate the formula that was, before, a string. But then you lose the formulas for all the other cells.
So the issue is that some cells are used to sum, and I don't want to drag the formula over those cells, but at the same time, I do need to use the formula over the whole range, otherwise it would just take too long.
Once you put a formula in G1, the previous formula in that cell is no longer available, so referencing G1 in your new formula would just produce a circular reference.
Instead think of a formula that combines both formulas into one: it should detect in which situation it is and then perform the appropriate calculation.
In your case, I think this formula will do what you want:
=IFERROR(INDEX($M$3:$M$9, MATCH(F1,$L$3:$L$9)), IF(E1="", "", SUM(G2:G4)))
Put it in cell G1 and copy it down.
Note how it looks at column E to decide whether it should do the sum. I also adapted a bit the part you already had, by making some references absolute (adding some $), because the area in the L and M columns is positioned at fixed rows.
Add a helper column in row H for your Index-Match formula and copy it all the way down. Then, in row I do an if statement. If row H meets the criteria you want, do that, else use row G.
So I think I found a good solution, especially in the case where you are going to be using the spreadsheet over and over, and the format won't change much. This might be too specific for anyone to use, but posting it just in case someone gets some use out of it.
First I created two macros, one to hide the sum rows, and another to unhide all the sum rows. I got the sum rows from another column by copying all the formulas across to the new column I'm looking at. Numbers will of course be wrong, but the sum formulas will be what we want to keep. You can speed this up by finding "sum" in formulas and then selecting all of the results.
Next, use the macro which hides all the sum rows.
Next, create the index formula in the first row. Control shift down to select all rows beneath. Then, "find", and "go to special" and select "only visible cells", and then hit F2, and control enter, and this will copy the formula down to all the visible cells, ie the non-sum cells.
Then use your unhide macro, and it should be golden!
You can use this technique for any spreadsheet where the source data format is different from target, and where you have fixed formulas in the target which you always will need.
I have been trying to get the above data which is presented datewise in Column form to be pasted in the below format in Row form, but challenge is either 1 date at a time can be taken or either single cell reference needs to be given in each cell on other sheet, need some shortcut such that sheets data remains dynamic and datewise data is copied. Image shows it in one sheet, above data is required to be shown in below format in other sheet.
Thanks and Regards
Mandeep Goraya
For example, your table is like this:
Put this code into cell B8 then fill right:
=INDEX($B$2:$F$3,MOD(COLUMN(A1)-1+ROWS($B$2:$F$3),ROWS($B$2:$F$3))+1,1+INT((COLUMN(A1)-1)/ROWS($B$2:$F$3)))
I am just a beginner in VBA. I am trying to copy some data from one workbook that is updated daily to a master woorkbook and generate a report. I want it to first filter one of the columns for nonzero values and copy it with three selected columns for example columns T,C,N. I have looked everywhere for an answer but I haven't succeeded yet. Please help.
You can check if a given cell has value 0 by something like this If Sheets(sheetname).Cells(rownumber,columnnumber)=0 Then
You haven't specified what do you want to do on the other workbooks with the cells that were empty.
I am trying to merge header cells columns into one cell but when i do that my data also comes in one column. I want my resulting output as per this screenshot attached. Kindly help me for this.
Are your columns variable? Or you always have the same output schema?
If it's fixed then, I would use a template where the headers are fixed and I start populating from row 5.
Google Spreadsheet input
If you are using the Spreadsheet input that is not possible on the step.
What I usually do in that kind of situation is to create a row with my headers and hide it so the user don't get confused with two headers. Them the Step will get the result perfectly using the column names provided on first row. (you can use a formula like =b3 there so it changes with the real header. No problem.)
Excel input
If you are using the Excel input step you can set the sheet to be read from row 2, column 0 and should work fine. =)