Related
For instance, I assume this is what SDETs do?
They don't actually write the functional code but they're able to write integration/unit tests, am i correct?
But can someone learn to read code and then start writing tests?
This is actually a good question. I have been at the same place when I was working only on Manual Testing. Here is how I experienced things when I transitioned to automation. To answer your question, yes someone can read code and start writing tests on it but you need to understand the code that you are going to test.
There are different types of testing methodologies that are used when testing an application. These tests are done in layers so that the application is properly tested. Here is how the layering looks like:
1) Unit testing: This part is usually written by developers. This is because they have written the code and know the functionalities of the code and is easier for them to write. I am an SDET and I have written unit tests. There was only one opportunity that presented itself and it was when we were refactoring our code and there was a lot of room to write Unit Tests. In unit tests, you test functions in isolation by giving it some values and verifying an expected value. This is not something an SDET does, but should be able to do if provided the chance.
2) Integration testing: This part is also usually written by developers but the definition of integration testing is a bit vague. It means testing multiple modules in isolation. This can be modules in backend or modules in frontend but not together. Frameworks that help achieve this are code level integration tests for the technology you are using. Like for Angular application, there are deep integration tests that test the HTML and CSS of a component and there are shallow integration tests that just test two component's logic together. This can be written by an SDET but is usually written by the developer.
3) API testing (contract based testing): Pact helps us achieve this. There are other tools like rest assured, postman and jmeter that help in testing API end points. Pact helps test the integration of APIs on the frontend and verifies that integration in backend. This is very popular with microservices. This is something that can be written either by the developer or by the SDET.
4) End to End testing: This is something that is the sole responsibility of SDET. This covers testing of user flows depending on user stories. It is testing the entire stack together. Backend and frontend. This allows SDETs to automate how a user would use the application. This is also called as blackbox testing. There are different frameworks that help achieve this. Selenium, Protractor, Cypress, Detox etc. This is the sole responsibility of an SDET.
5) Load testing: This is again something that an SDET does. Using tools like hey, jmeter, loadrunner etc. These tests allow the SDET to initiate a heavy load on the system and check for breaking points of the system.
6) Performance testing: Testing the performance of the webpage for an end user depending on the page load time, the SEO optimisation and the weight of elements of page. This is something achieved by google's lighthouse tool that is an amazing tool to use. I am not aware of anything else that is as amazing as lighthouse because it gives us a lot of data that we can use to improve our website. This is a primary job of an SDET.
7) CI/CD: Continuous Integration and Continuous Deployments is something that requires architectural knowledge of the system. This is something you can do when you are an SDET3 or a lead QA engineer. For systems like AWS and GCP, using CI build tools like Jenkins and CircleCI, one can set up a pipeline that runs all the above tests when ever a branch is merged into master or whenever a pull request is created. Creating the pipeline will require you to have knowledge of Docker, Kubernetes, Jenkins and your test frameworks. First you dockerize your tests, then you build the image and push it to a directory in cloud, then you use the image to create a kubernetes job that runs everytime a change is presented in your code.
These are the levels of work that an SDET does. It takes time and hard work to have an understanding of all testing frameworks and how everything fits together. An SDET should have knowledge of the server, http protocols, frontend, backend, browsers, caching, pipeline management and orchestration of tests.
Yes, sure. You can write unit tests increasing test coverage of the codebase. That's very qualified work from software test engineering since you need to be aware what is going on in the code. This skill is definitely great!
I advise you to take a look on so called "mutation coverage". Usage of mutation coverage as a better metric than simple unit test coverage. Mutation tests are changing logical operators in the different parts of the codebase (making so called "mutants") and then are running unit tests to find out how many unit tests will fail showing their effectiveness (if after mutants were injected the result is the same as without them - unit tests quality is low and they won't catch any new injected issues to the codebase).
I got this question while interviewing some companies. I don't think I answer the question well. However, based on my understanding:
The UI level testing is more about the what end user will see and would be better to use for acceptance testing.
The API level test is good for performance testing, since it's easier to simulate multiple users to access the resource at the same time. And, it's easier to look at where the problem will be.
Can anyone give me more detail about that? And when should we choose to use which type of testing?? Thanks a lot.
UI stands for User Interface. UI allows the user to interact with the application.
UI testing refers to testing graphical user interfaces, such as how user interacts with the application, testing application elements like fonts, layouts, buttons, images, colors, etc. Basically, UI testing concentrates on the look-and-feel of an application.
For more details on API testing, see:
http://www.guru99.com/gui-testing.html
API is an acronym for Application Programming Interface. API enables communication between two separate software systems. A software system implementing an API contains functions/sub-routines which can be executed by another software system.
API testing is checking API of a Software System. In order to check the API , it needs to be called from the calling software . Necessary test environment, database, server, application setup needs to be prepared before doing API Testing.
API testing is focused on the functionality of the business logic (such as a calculating total price) and it is entirely different from UI testing. It mainly concentrates on the business logic layer of the software architecture. This testing won’t concentrate on the look and feel of an application.
For more details on API testing, see:
http://www.guru99.com/api-testing.html
Eric
In few words:
UI testing is testing between users (humans in most cases) and front end or client side (aka presentation logic) of the application such as a browser.
API testing is testing between backend or server side of the application (aka business logic) and backend of another application.
Instead of going into a long explanation, where you can find volumes written on the Internet, let me give you a couple of additional keywords.
For UI testing, also look at FUNCTIONAL and EXPLORATORY testing.
For API, also look at UNIT and AUTOMATED testing.
I find this resource useful http://www.stickyminds.com/testandevaluation.asp?Function=FEATUREDETAIL&ObjectId=17275
Pick the one your boss will give you a promotion for.
Testing at the API layer enables the robust, low-noise regression tests that are essential for continuous testing. It also helps you zero in on problems that might not be evident from the UI level — for example, an error in writing the expected values to the database.
GUI Testing--testing on visible elements in pages or screens called as Gui testing.some other names to GUI are Sites testing/ front end testing/ screens testing.
API testing--Testing on invisible services functionalities called as API testing. other names to API are Services testing/ middleware Testing/SOA testing.
End-to-End Testing--testing related to integration of a site and a service is called as End-to-End testing. other names are Inter System testing/ interoperability testing.
In everyday testing, basicly there are three uses for API testing from the testers' point of view.
When an application is brand new, and the backend is ready/being developed, and there is no GUI yet, that is when API is tested. Also when the new functionality is newly developed, and is not yet deployed to the GUI ready code base. This is usually the phase of the project that most, and highest priority business requirements are implemented in the code.
When you encounter a API call error in your browser's DevTools, it could be usefull to test different API resources.
When the tester reports a defect, in the defect ticket, the developers post in the result of new fix, or operations the result of the fix/configuration in the environment, as a quick check of the isolated functionality.
But in general, once a GUI is ready, usually API testing in not needed, at least for testers. Of course for developers, it is useful to test new functionalities, as a higher level testing (integration testing) after unit tests.
I'm just starting out working on test scripts.I'm going to get a web application created in .net for testing. I have no idea what kind of testing is needed for such kind of applications.
My suggestion is that you should have a healthy mix of automated and manual testing.
AUTOMATED TESTING
Unit Testing
Use NUnit to test your classes, functions and interaction between them.
http://www.nunit.org/index.php
Automated Functional Testing
If it's possible you should automate a lot of the functional testing. Some frame works have functional testing built into them. Otherwise you have to use a tool for it. If you are developing web sites/applications you might want to look at Selenium.
http://www.peterkrantz.com/2005/selenium-for-aspnet/
Continuous Integration
Use CI to make sure all your automated tests run every time someone in your team makes a commit to the project.
http://martinfowler.com/articles/continuousIntegration.html
MANUAL TESTING
As much as I love automated testing it is, IMHO, not a substitute for manual testing. The main reason being that an automated can only do what it is told and only verify what it has been informed to view as pass/fail. A human can use it's intelligence to find faults and raise questions that appear while testing something else.
Exploratory Testing
ET is a very low cost and effective way to find defects in a project. It take advantage of the intelligence of a human being and a teaches the testers/developers more about the project than any other testing technique i know of. Doing an ET session aimed at every feature deployed in the test environment is not only an effective way to find problems fast, but also a good way to learn and fun!
http://www.satisfice.com/articles/et-article.pdf
There are a lot of small things that you may need to check (assuming you're doing manual testing):
Check for the exact location/alignment of items
Check whether all hyperlinks are working as expected
Check by clicking a button (submitting the form) multiple time
Check for security aspects (google for xss or cross site scripting)
Check for fonts etc. (if they're different from standards)
Hope this helps.
A web application should go through below test's
1) Functionality Testing
2) Usability testing
3) Interface testing
4) Compatibility testing
5) Performance testing
6) Security testing
for complete guide
Read this Article
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 7 years ago.
The community reviewed whether to reopen this question 6 months ago and left it closed:
Original close reason(s) were not resolved
Improve this question
Are functional testing and integration testing the same?
You begin your testing through unit testing, then after completing unit testing you go for integration testing where you test the system as a whole. Is functional testing the same as integration testing? You still taking the system as a whole and testing it for functionality conformance.
Integration testing is when you test more than one component and how they function together. For instance, how another system interacts with your system, or the database interacts with your data abstraction layer. Usually, this requires a fully installed system, although in its purest forms it does not.
Functional testing is when you test the system against the functional requirements of the product. Product/Project management usually writes these up and QA formalizes the process of what a user should see and experience, and what the end result of those processes should be. Depending on the product, this can be automated or not.
Functional Testing:
Yes, we are testing the product or software as a whole functionally whether it is functionally working properly or not (testing buttons, links etc.)
For example: Login page.
you provide the username and password, you test whether it is taking you to home page or not.
Integration Testing:
Yes, you test the integrated software only but you test where the data flow is happening and is there any changes happening in the database.
For example: Sending e-mail
You send one mail to someone, there is a data flow and also change in database (the sent table increases value by 1)
Remember - clicking links and images is not integration testing. Hope you understood why, because there is no change in database by just clicking on a link.
Hope this helped you.
Functional Testing: It is a process of testing where each and every component of the module is tested. Eg: If a web page contains text field, radio botton, Buttons and Drop down etc components needed to be checked.
Integration Testing: Process where the dataflow between 2 modules are checked.
This is an important distinction, but unfortunately you will never find agreement. The problem is that most developers define these from their own point of view. It's very similar to the debate over Pluto. (If it were closer to the Sun, would it be a planet?)
Unit testing is easy to define. It tests the CUT (Code Under Test) and nothing else. (Well, as little else as possible.) That means mocks, fakes, and fixtures.
At the other end of the spectrum there is what many people call system integration testing. That's testing as much as possible, but still looking for bugs in your own CUT.
But what about the vast expanse between?
For example, what if you test just a little bit more than the CUT? What if you include a Fibonacci function, instead of using a fixture which you had injected? I would call that functional testing, but the world disagrees with me.
What if you include time() or rand()? Or what if you call http://google.com? I would call that system testing, but again, I am alone.
Why does this matter? Because system-tests are unreliable. They are necessary, but they will sometimes fail for reasons beyond your control. On the other hand, functional tests should always pass, not fail randomly; if they are fast, they might as well be used from the start in order to use Test-Driven Development without writing too many tests for your internal implementation. In other words, I think that unit-tests can be more trouble than they are worth, and I have good company.
I put tests on 3 axes, with all their zeroes at unit-testing:
Functional-testing: using real code deeper and deeper down your call-stack.
Integration-testing: higher and higher up your call-stack; in other words, testing your CUT by running the code which would use it.
System-testing: more and more unrepeatable operations (O/S scheduler, clock, network, etc.)
A test can easily be all 3, to varying degrees.
I would say that both are tightly linked to each other and very tough to distinguish between them.
In my view, Integration testing is a subset of functional testing.
Functionality testing is based on the initial requirements you receive. You will test the application behaviour is as expected with the requirements.
When it comes to integration testing, it is the interaction between modules. If A module sends an input, B module able to process it or not.
Integration testing - Integration testing is nothing but the testing of different modules. You have to test relationship between modules. For ex you open facebook then you see login page after entering login id and password you can see home page of facebook hence login page is one module and home page is another module. you have to check only relationship between them means when you logged in then only home page must be open not message box or anything else. There are 2 main types of integration testing TOP-DOWN approach and BOTTOM UP approach.
Functional Testing - In functional testing you have to only think about input and output. In this case you have to think like a actual user. Testing of What input you gave and what output you got is Functional testing. you have to only observe output. In functional testing you don't need to test coding of application or software.
In a Functional testing tester focuses only Functionality and sub functionality of application. Functionality of app should be working properly or not.
In integration testing tester have to check dependency between modules or sub-modules.Example for modules records should be fetching and displayed correctly in another module.
Integration Test:-
When Unit testing is done and issues are resolved to the related components then all the required components need to integrate under the one system so that it can perform an operation.
After combining the components of the system,To test that whether the system is working properly or not,this kind of testing is called as Integration Testing.
Functional Testing:-
The Testing is mainly divided into two categories as
1.Functional Testing
2.Non-Functional Testing
**Functional Testing:-
To test that whether the software is working according to the requirements of the user or not.
**Non-Functional Testing:-
To test that whether the software satisfies the quality criteria like Stress Test,Security test etc.
Usually,Customer will provide the requirements for Functional Test only and for Non Functional test,Requirements should not be mentioned but the application necessarily perform those activity.
Integration testing It can be seen as how the different modules of the system work together.
We mostly refers to the integrated functionality of the different modules, rather different components of the system.
For any system or software product to work efficiently, every component has to be in sync with each other.
Most of the time tool we used for integration testing will be chosen that we used for unit testing.
It is used in complex situations, when unit testing proves to be insufficient to test the system.
Functional Testing
It can be defined as testing the individual functionality of modules.
It refers to testing the software product at an individual level, to check its functionality.
Test cases are developed to check the software for expected and unexpected results.
This type of testing is carried out more from a user perspective. That is to say, it considers the expectation of the user for a type of input.
It is also referred as black-box testing as well as close-box testing
Checking the functionality of the application is generally known as functional testing, where as the integration testing is to check the flow of data from one module to other.
Lets take example of money transfer app.Suppose we have page in which we enter all the credentials and if we press transfer button and after that if we getting any success, Then this is functional testing. But in same example if we verify the amount transfer then it is integration testing.
Authors diverge a lot on this. I don't believe there is "the" correct interpretation for this. It really depends.
For example: most Rails developers consider unit tests as model tests, functional tests as controller tests and integration tests as those using something like Capybara to explore the application from a final user's perspective - that is, navigating through the page's generated HTML, using the DOM to check for expectations.
There is also acceptance tests, which in turn are a "live" documentation of the system (usually they use Gherkin to make it possible to write those in natural language), describing all of the application's features through multiple scenarios, which are in turn automated by a developer. Those, IMHO, could be also considered as both, functional tests and integration tests.
Once you understand the key concept behind each of those, you get to be more flexible regarding the right or wrong. So, again IMHO, a functional test could also be considered an integration test. For the integration test, depending on the kind of integration it's exercising, it may not be considerate a functional test - but you generally have some requirements in mind when you are writing an integration test, so most of the time it can be also considerate as a functional test.
There are a lot of testing methods out there i.e. blackbox, graybox, unit, functional, regression etc.
Obviously, a project cannot take on all testing methods. So I asked this question to gain an idea of what test methods to use and why should I use them. You can answer in the following format:
Test Method - what you use it on
e.g.
Unit Testing - I use it for ...(blah, blah)
Regression Testing - I use it for ...(blah, blah)
I was asked to engage into TDD and of course I had to research testing methods. But there is a whole plethora of them and I don't know what to use (because they all sound useful).
1. Unit Testing is used by developers to ensure unit code he wrote is correct. This is usually white box testing as well as some level of black box testing.
2. Regression Testing is a functional testing used by testers to ensure that new changes in system has not broken any of existing functionality
3. Functional testing is testing conducted on a complete, integrated system to evaluate the system's compliance with its specified requirements. Functionality testing falls within the scope of black box testing, and as such, should require no knowledge of the inner design of the code or logic
.
This Test-driven development and Feature Driven Development wiki articles will be of great help for you.
For TDD you need to follow following process:
Document feature (or use case) that
you need to implement or enhance
in your application that
currently does not exists.
Write set of functional test
cases that can ensure above
feature (from step 1) works. You may need to
write multiple test cases for
above feature to test all different
possible work flows.
Write code to implement above feature (from step 1).
Test this code using test cases you
had written earlier (in step 2). The actual
testing can be manual but I would recommend to create automated tests
if possible.
If all test cases pass, you are good to
go. If not, you need to update code (go back to step 3)
so as to make the test case pass.
TDD is to ensure that functional test cases which were written before you coded should work and does not matter how code was implemented.
There is no "right" or "wrong" in testing. Testing is an art and what you should choose and how well it works out for you depends a lot from project to project and your experience.
But as a professional Test Expert my suggestion is that you have a healthy mix of automated and manual testing.
(Examples below are in PHP but you can easily find the correct examples for what ever langauge/framework you are using)
AUTOMATED TESTING
Unit Testing
Use PHPUnit to test your classes, functions and interaction between them.
http://phpunit.sourceforge.net/
Automated Functional Testing
If it's possible you should automate a lot of the functional testing. Some frame works have functional testing built into them. Otherwise you have to use a tool for it. If you are developing web sites/applications you might want to look at Selenium.
http://www.webinade.com/web-development/functional-testing-in-php-using-selenium-ide
Continuous Integration
Use CI to make sure all your automated tests run every time someone in your team makes a commit to the project.
http://martinfowler.com/articles/continuousIntegration.html
MANUAL TESTING
As much as I love automated testing it is, IMHO, not a substitute for manual testing. The main reason being that an automated can only do what it is told and only verify what it has been informed to view as pass/fail. A human can use it's intelligence to find faults and raise questions that appear while testing something else.
Exploratory Testing
ET is a very low cost and effective way to find defects in a project. It take advantage of the intelligence of a human being and a teaches the testers/developers more about the project than any other testing technique i know of. Doing an ET session aimed at every feature deployed in the test environment is not only an effective way to find problems fast, but also a good way to learn and fun!
http://www.satisfice.com/articles/et-article.pdf
This answer is (almost) identical to one that I gave to another question. Check out that question since it had some other good answers that might help you.
How can we decide which testing method can be used?
I usually do the following things:
Page consistency in case of multi-page web sties.
Testing the database connections.
Testing the functionalities that can be affected by the change I just made.
I test functions with sample input to make sure they work fine (especially those that are algorithm-like).
In some cases I implement features very simply hard-coding most of the settings then implement the settings later, testing after implementing every setting.
Most of these apply to applications, too.
Well before going to the answer i would like to clear testing concept about multiple methods.
There are six main testing types which cover all most all testing methods.
Black Box Testing
White Box Testing
Grey Box Testing
Functional Testing
Integration Testing
Usability Testing
Almost all Testing methods lies under these types, you can also use some testing method in multiple types like you can use Smoke testing in black box or white box approach on the basis of resources available to test.
So for testing a web site completely you need to use at least following testing methods on the basis of resources available to test. These are at least methods which should be used to test a web site, but there may be some more imp methods on the basic of nature of website.
Requirement Testing
Smock Testing
System Testing
Integration Testing
Regression Testing
Security Testing
Performance & Load Testing
Deployment Testing
You should at least use all of above (8) testing methods to test a web site no matter what testing type you are focusing. You can automate you test in some areas and you can do this manually it all depends upon the resources availability.
There is specifically no hard and fast rule to follow any testing type or any method. As you know "Testing Is An ART" so art don't have rules or boundaries. Its totally up to you What you use to test and how.......
Hope you got the answer of question.
Selenium is very good for testing websites.
The answer depends on the Web framework used (if any). Django for example has built-in testing functions.
For PHP (or functional web testing), SimpleTest is pretty good and well... simple. It support Unit Testing (PHP only) and Web Testing. Tests can run in the IDE (Eclipse), or in the browser (meaning on your server).
The other answers posted so far focus on unit/functional/performance/etc. testing, and they are all reasonable.
However, one the key questions you should ask is, "how effective is my testing?".
This is often answered with test coverage tools, that determine which parts of your application actually get exercised by some set of tests. The ideal test coverage tool lets you test your application by any method you can imagine (including all the standard answers above) and will then report what part and what percentage of your code was exercised. Most importantly, it will tell you what code you did not exercise. You can then inspect that code and decide if more testing is warranted, or if you don't care. If the untested code has to do with "disk full error handling" and you belive that 1TB disks are common, you might decide to ignore that. If the untested code is the input validation logic leading to SQL queries, you might decide that you must test that logic to ensure that no SQL injection attacks can occur.
What test coverage tools let you do it to make a rational decision that you have tested adequately, using data about what parts of your code has been exercised. So regardless of how you test, best practices indicates you should also do test coverage analysis.
Test coverage tools can be obtained from a variety of sources. SD provides a family of test coverage tools that handle C, C++, Java, C#, PHP and COBOL, all of which are used to support web site testing in various ways.