I have got several messages on error queue which has name TestQueue_errors.
One of the messages on error queue is important and should be moved back to service queue TestQueue so it can be processed again. The other messages on error queue are broken and should stay on error queue.
I have tried to do that with shovel plugin but it seems it is able only to move all messages from one queue to another. Is there a way I could achieve that, to move single message from one queue to another?
As far as I know Rabbit Management does not allow to do it. The only thing you can do is to publish this message again.
Maybe there are some tools which give possibility to achieve it but it is not a standard behaviour.
Here are actions which you are able to perform on the queue (from RabbitMQ Management page):
Move all messages from one queue to another
Get all messages without requeue option (they would not be in the queue anymore)
Get first N messages without requeue option and then move the rest of messages to another queue
Related
I have a publisher that sends messages to a consumer that moves a motor.
The motor has a work queue which I cannot access, and it works slower than the rate of the incoming messages, so I'm trying to control the traffic on the consumer.
To keep updated and relevant data coming to the motor without the queue filling up and creating a traffic jam, I set the RabbitMQ queue size limit to 5 and basicQos to 1.
The idea is that the RabbitMQ queue will drop the old messages when it is filled up, so the newest commands are at the front of the queue.
Also by setting basicQos to 1 I ensure that the consumer doesn't grab all messages from the queue and bombards the motor at once, which is exactly what i'm trying to avoid since I can't do anything once the command was sent to the motor.
This way the consumer takes messages from the queue one by one, while new messages replace the old ones on the queue.
Practically this moves the bottleneck to the RabbitMQ queue instead of the motor's queue.
I also cannot check the motor's work queue, so all traffic control must be done on the consumer.
I added messageId and tested, and found out many messages are still coming and going long after the publisher is being shut down.
I'm expecting around 5 messages after shutdown since that's the size of the queue, but i'm getting hundreds.
I also added a few seconds of sleep inside the callback to make sure this isn't the robot queue that's acting up, but i'm still getting many messages after shutdown, and I can see in the logs the callback is being called every time so it's definitely still getting messages from somewhere.
Please help.
Thanks.
Moving the acknowledgment to the end of the callback solved the problem.
I'm guessing that by setting basicQos to 1 it did execute the callback for each message one after another, but in the background it kept grabbing messages from the queue.
So even when the publisher was shutdown, the consumer still had messages that were taken from the queue in it, and those messages were the ones that I saw being executed.
I'm trying to use RabbitMQ in a more unconventional way (though at this point i can pick any other message queue implementation if needed)
I have one queue (I can have more if needed) that where customers are fetching N messages asynchronous. After they do their work I send the results from the client to the db.
I have two problems: first I don't want that they will work on the same message, second I want to grantee that I wont lose messages in case that my customer will close the browser or just stop working.
I looked at the documentation and saw the TTL which was perfect for me if I could alter that message that got timeout isn't going to be deleted but to move to another queue. can't find a way to alter this.
Moreover I looked at the confirmation option which in the first glance looked what I wanted,that mechanism is working like this: when the consumer gets a message he send confirmation to queue, I thought I can delay this confirm and send it when the work is done on the client side.
my problem was that I can't program the queue that if any message didn't get confirm then return it to the queue (or to another).
I also find how to do a scheduled message but it didn't help either because I don't want that the message will be inserted to the queue in five min,I want that when a customer will receive a message it will be locked in the queue for 5 min until confirm to delete is set otherwise return it to the queue.
Can I do temporary queue that enables my mechanism?
If someone can help with one of the problems or suggest another architecture or option to do it in another MQ it would be great.
Resources:
confirmation:
http://www.rabbitmq.com/blog/2011/02/10/introducing-publisher-confirms/
post about locks but his problem was a batcher component:
Locks and batch fetch messages with RabbitMq
TTL:
https://www.rabbitmq.com/ttl.html
Schedule a message:
https://www.rabbitmq.com/blog/2015/04/16/scheduling-messages-with-rabbitmq/
my problem was that I can't program the queue that if any message
didnt get confirm then return it to the queue (or to another).
RabbitMQ does this anyhow, so all you have to do is switch off the auto-ack flag, you figured this out
I thought I can delay this confirm and send it when the work is done
on the client side.
so just send the ACK once you've finished with processing the message.
All the unacknowledged messages remain in the queue and are re-delivered to next consumer (or the same one when it's up again, depending on your setup)
I have the following problem.
My program sends messages directly to the Queue (without exchange). I need to monitor incoming of new messages and send them to other Queue without removing them from source queue.
I don't have access to program code, so I'm not able to publish messages to exchange first.
Is it possible to solve this problem using the management web interface of RabbitMQ?
I tried to use shovel plugin, but it removes all messages from source queue after ack.
First to clear up few things:
My program sends messages directly to the Queue (without exchange) This is not true, at the very least (and most likely in this case) nameless exchange is used.
removes all messages from source queue after ack
this is by design and therefore perfectly fine.
You should never keep messages in the queue, queue is made to be consumed. As Derick Bailey says here
RabbitMQ is not a database. RabbitMQ is a message broker and queueing system.
on the same link you will find your answer. I cannot give a concrete one since you didn't provide motivation, but whatever it is keeping messages in the queue is never good!
Maybe you want to log/store your message first and then process it with the consequence of processing being some 3rd action or whatever...
I have thousands of unacked messages in my dev environment which I can't restart.
Is there a way to remove (purge) all messages even if they are unacknowledged?
Close the channel that the unacked messages reside on, which will nack them back into the queue, then call purge.
You have to make consumer ack them (or nack) and only after that they will be removed. Alternatively you can shutdown consumers and purge the queue completely.
If you are looking for some way to purge all unacked messages - there are no such feature nor in AMQP protocol neither in RabbitMQ.
It looks like your consumer is the cause of the problem, so you have to adjust it (rewrite) to release message immediately after it processed or failed.
Once there are no "ready" messages in the queue, delete it and recreate.
YOU WILL LOSE THE QUEUE CONTENTS with this method.
You need to put messages back into the queue before you can purge them:
close the channel
close the connection (the script doesn't work for me)
As an alternative, this doesn't require to wait:
delete and recreate the queue
restart the server
You need to call basic.recover to force all unacked messages to be re-enqueued to a channel that failed. Be aware of the errata concerning this function specifying that only the requeue mode is supported by RabbitMQ.
For software developer use below code.
channel.purgeQueue(queue-name);
if we use this code the Queue will be clear and same queue will exist.
One way this can happen is if the consumer is stuck recycling the same messages due to a processing error. In this case, the RabbitMQ queue management interface may show the messages as Unacked, but really they are being read from the queue and processed (to the point of the failure) then requeued (to enable a retry) at a rapid pace -- maybe thousands of times per second.
During this loop, the messages exist briefly in the Ready state, but are immediately removed again by you application -- and the cycle begins again. As an example, this auto-requeue behavior is the default for Spring AMQP.
Since the messages are never left in the Ready state, the Management Interface's Get Message(s) button is unlikely work. What can work, if you have queue access, is to run a separate custom consumer instance, perhaps locally, but with the specific intent of removing and not requeuing the messages in question.
By RabbitMQ's Fair Dispatch mechanism, your additional consumer will likely receive the messages in question and have the opportunity to perform your custom handling.
You might even write a custom utility to do this, with logic to filter, analyze, or deadletter the messages of interest.
If you want to clear the contents of the queue, then you can use the AMQP method queue.purge: There is queue purge in AMQP: http://www.rabbitmq.com/amqp-0-9-1-reference.html#queue.purge
You could do similar using the management plugin.
I'm using ActiveMQ and I would like to know how to solve this specific case.
When the consumer is down, the producer sends a message to the queue. The message will remain in the queue until the consumer is running to consume it.
Now imagine I shutdown the producer, the message will STILL remain in the queue. Now i run the consumer and it will try to consume that message, but won't be able to reply back to the producer since its down.
I would like to solve this problem by cleaning the messages if the producer is out.
The ActiveMQ Broker cleans the Queue after stopping. I would like to do the same for the messages of a respective producer.
Thanks.
Based on what I understand now from your question and additional comments I propose to add a Message Property to your messages to identify the Producer, and write a small utility that uses a Message Selector to read all messages matching the Producer from the queue. You can run that utility straight after the Producer is stopped (or crashes), and that should quite accurately do what you want to achieve.
EDIT: although primarily focused on EE, the Sun/Oracle JavaEE Tutorial contains a very good chapter on general JMS programming that starts off with standalone producers and consumers. The accompanying source code bundle can be downloaded here, the ready to comoile samples in that bundle should get you started very quickly.
You can solve it a couple of ways. One is to set a TTL on the message so it goes away. The other is to connect via JMX and purge the Queue or remove the specific message using a selector statement or with the Message's specific MessageId value.
See this article for some hints.