I have written the following code in VBA and I get a Type Mismatch error in the conditions of the ;SUMPRODUCT;.
For Day = 1 To DaysTill
For m = 0 To Rot
For n = 0 To StepsNumber
RArray((Day - 1) * (Rot + 1) + m, n) = Application.WorksheetFunction.SumProduct(--(Range("HT12:HT1048576") <= RotArray((Day - 1) * (Rot + 1) + m)), --(Range("HS12:HS1048576")) = Day, Range("HT12:HT1048576"), Range("HV12:HV1048576").Offset(, n)) * PriceStepArray(n)
Next n
Next m
Next Day
Does anyone know how to fix this?
Related
I don't understand why I cannot compare an array in VBA. I created an array that starts 0 1 2 3. I added a comparison due to subscript errors trying to compare 0 to 0 - 1 so it can only start comparisons at 1 and continue. Now I'm receiving a type Mismatch 13 and I can't figure out why the data type is different/not working. I'm guessing i in a for loop is not considered an int or something?
It fails at CoordinatesArray(i) = CoordinatesArray(i-1)
Code:
For i = 0 To NumLines - 1
coordx1 = (vLines(12 * i + 6))
coordy1 = (vLines(12 * i + 7))
coordz1 = (vLines(12 * i + 8))
CoordinatesArray(i) = Array(coordx1, coordy1, coordz1)
If i > 0 Then
If CoordinatesArray(i) = CoordinatesArray(i - 1) Then
coordx1 = (vLines(7))
You will need to compare each value in the jagged array separately:
For i = 0 To NumLines - 1
coordx1 = (vLines(12 * i + 6))
coordy1 = (vLines(12 * i + 7))
coordz1 = (vLines(12 * i + 8))
CoordinatesArray(i) = Array(coordx1, coordy1, coordz1)
If i > 0 Then
If CoordinatesArray(i)(1) = CoordinatesArray(i - 1)(1) And _
CoordinatesArray(i)(2) = CoordinatesArray(i - 1)(2) And _
CoordinatesArray(i)(3) = CoordinatesArray(i - 1)(3) Then
coordx1 = (vLines(7))
This code doesn't find the correct output
for say n= 1 (although it gives the correct output for say n= 2,3,4..etc.)
if we put n= 1 to find x then the i loop will continue from 1 to 0, hence the first term in x should vanish and leftover should be the second term 5; but it gives 0 ?
Is there any limitation on the input n to run the for loop ?I would appreciate any help.
Function math(n As Integer) As Double
Dim i As Integer
Dim x As Double
For i = 1 To n - 1
x = (n - 1) * 2 + 5
sum = sum + x
Next i
math = sum
End Function
Why not simply:
Function math(n As Integer) As Double
Math = ((n - 1) * 2 + 5) * Abs((n - 1) - (n = 1))
End Function
???
if the answer is correct then Math = (n * 2 + 3) * Abs((n - 1) - (n = 1)) would be easier to understand and make much more sense
In the for loop, if you don't precise the Step, the variable will only increment by 1.
And here, you start at 1 to go to 0, so the loop won't execute, you need to test n to cover both cases :
Function math(n As Integer) As Double
If n < 0 Then Exit Function
Dim i As Integer
Dim x As Double
Dim Summ As Double
Select Case n
Case Is > 1
For i = 1 To n - 1
x = (i - 1) * 2 + 5
Summ = Summ + x
Next i
Case Is = 1
Summ = (n - 1) * 2 + 5
Case Is = 0
Summ = 5
Case Else
MsgBox "This case is not supported", vbInformation + vbOKOnly
Exit Function
End Select
math = Summ
End Function
If n = 1, you end up with For i = 1 To 0 which is incorrect and
should be expressed For i = 1 To 0 STEP -1.
So I suggest you add the STEP BYand make sure it is either 1 to -1 depending on N.
I have issue with an Excel worksheet that contains the formula:
=Spline($D$9:$D$34,$J$9:$J$34,$D43)
Sheet works fine until I open this sheet on network drive and save it on local drive. Then this formula throws #NAME? error. Strange is, that error is gone when I click on line with formula to edit it and press enter (nothing changes in formula).
Have someone met similar issue?
I just found another information. Formula spline is defined in VBA module, not internal in Excel. It looks like. But issue is still here.
Function spline(periodcol As Range, ratecol As Range, x As Range)
Dim period_count As Integer
Dim rate_count As Integer
period_count = periodcol.Rows.Count
rate_count = ratecol.Rows.Count
If period_count <> rate_count Then
spline = "Error: Range count does not match"
GoTo endnow
End If
ReDim xin(period_count) As Single
ReDim yin(period_count) As Single
Dim c As Integer
For c = 1 To period_count
xin(c) = periodcol(c)
yin(c) = ratecol(c)
Next c
Dim n As Integer
Dim i, k As Integer
Dim p, qn, sig, un As Single
ReDim u(period_count - 1) As Single
ReDim yt(period_count) As Single
n = period_count
yt(1) = 0
u(1) = 0
For i = 2 To n - 1
sig = (xin(i) - xin(i - 1)) / (xin(i + 1) - xin(i - 1))
p = sig * yt(i - 1) + 2
yt(i) = (sig - 1) / p
u(i) = (yin(i + 1) - yin(i)) / (xin(i + 1) - xin(i)) - (yin(i) - yin(i - 1)) / (xin(i) - xin(i - 1))
u(i) = (6 * u(i) / (xin(i + 1) - xin(i - 1)) - sig * u(i - 1)) / p
Next i
qn = 0
un = 0
yt(n) = (un - qn * u(n - 1)) / (qn * yt(n - 1) + 1)
For k = n - 1 To 1 Step -1
yt(k) = yt(k) * yt(k + 1) + u(k)
Next k
Dim klo, khi As Integer
Dim h, b, a As Single
klo = 1
khi = n
Do
k = khi - klo
If xin(k) > x Then
khi = k
Else
klo = k
End If
k = khi - klo
Loop While k > 1
h = xin(khi) - xin(klo)
a = (xin(khi) - x) / h
b = (x - xin(klo)) / h
y = a * yin(klo) + b * yin(khi) + ((a ^ 3 - a) * yt(klo) + (b ^ 3 - b) * yt(khi)) * (h ^ 2) / 6
spline = y
endnow:
End Function
Try to add:
Application.Volatile
to your VBA code. Add this just below the Function statement to force a renewed calculation as soon as anything changes.
I have a function that only call the spline function when something happens..in this case when a division is less than zero..the inputs for the function is the same that for the spline function(called CUBIC), the spline was tested and works well when I call it direct! someone can help me?...follows a party of the code
Function NDF6(T As Variant, dias As Variant, taxas As Variant)
If T <= dias(1) Then
NDF6 = taxas(1)
Exit Function
End If
If T >= dias(tam) Then
NDF6 = taxas(tam)
Exit Function
End If
For i = 1 To tam
If T <= dias(i) Then
If taxas(i) / taxas(i - 1) < 0 Then
Call CUBIC(T, dias, taxas)
Else
i0 = ((taxas(i - 1) * dias(i - 1)) / 360) + 1
i1 = ((taxas(i - 1) * dias(i - 1)) / 360) + 1
irel = i1 / i0
i2 = irel ^ ((T - dias(i - 1)) / (dias(i) - dias(i - 1)))
i2rel = i2 * i0
i2real = i2rel - 1
NDF6 = i2real * (360 / T)
End If
Public Function CUBIC(x As Variant, input_column As Variant, output_column As Variant)
The function returns a zero value when I call the cubic function. The inputs are a cell with a value with a value equivalent a day and two arrays(DUONOFF and ONOFF) equivalent a days and rates, I call the function like:
NDF6(512,DUONOFF,ONOFF)
follows the CUBIC function
Public Function CUBIC(x As Variant, input_column As Variant, output_column As Variant)
'Purpose: Given a data set consisting of a list of x values
' and y values, this function will smoothly interpolate
' a resulting output (y) value from a given input (x) value
' This counts how many points are in "input" and "output" set of data
Dim input_count As Integer
Dim output_count As Integer
input_count = input_column.Rows.Count
output_count = output_column.Rows.Count
Next check to be sure that "input" # points = "output" # points
If input_count <> output_count Then
CUBIC = "Something's messed up! The number of indeces number of output_columnues don't match!"
GoTo out
End If
ReDim xin(input_count) As Single
ReDim yin(input_count) As Single
Dim c As Integer
For c = 1 To input_count
xin(c) = input_column(c)
yin(c) = output_column(c)
Next c
values are populated
Dim N As Integer 'n=input_count
Dim i, k As Integer 'these are loop counting integers
Dim p, qn, sig, un As Single
ReDim u(input_count - 1) As Single
ReDim yt(input_count) As Single 'these are the 2nd deriv values
N = input_count
yt(1) = 0
u(1) = 0
For i = 2 To N - 1
sig = (xin(i) - xin(i - 1)) / (xin(i + 1) - xin(i - 1))
p = sig * yt(i - 1) + 2
yt(i) = (sig - 1) / p
u(i) = (yin(i + 1) - yin(i)) / (xin(i + 1) - xin(i)) - (yin(i) - yin(i - 1)) / (xin(i) - xin(i - _1))
u(i) = (6 * u(i) / (xin(i + 1) - xin(i - 1)) - sig * u(i - 1)) / p
Next i
qn = 0
un = 0
yt(N) = (un - qn * u(N - 1)) / (qn * yt(N - 1) + 1)
For k = N - 1 To 1 Step -1
yt(k) = yt(k) * yt(k + 1) + u(k)
Next k
now eval spline at one point
Dim klo, khi As Integer
Dim h, b, a As Single
first find correct interval
klo = 1
khi = N
Do
k = khi - klo
If xin(k) > x Then
khi = k
Else
klo = k
End If
k = khi - klo
Loop While k > 1
h = xin(khi) - xin(klo)
a = (xin(khi) - x) / h
b = (x - xin(klo)) / h
y = a * yin(klo) + b * yin(khi) + ((a ^ 3 - a) * yt(klo) + (b ^ 3 - b) * yt(khi)) * (h ^ 2) _/ 6
CUBIC = y
out:
End Function
I was running tests on my software today and found that some of the values it was producing weren't correct.
I decided to step through the code and noticed that the variables I had assigned to textbox values on my userform when hovered over said empty, even though when hovering over the textbox assigned to it, the value inputted by the user showed.
For Example,
n = BiTimeSteps_TextBox.Value
when hovered over
n = empty
even though
BiTimeSteps_TextBox.Value = 2
when hovered over.
So say I have a formula shortly after that says
d = n*2 ,
n when hovered over says empty and d is made 0 when it shouldn't be.
Someone told me if I switch it around to
BiTimeSteps_TextBox.Value = n
it should be recognised but it is still not.
What could possibly be causing this?
See full code below: (it aims to price options using the binomial tree pricing method)
S = BiCurrentStockPrice_TextBox.Value
X = BiStrikePrice_TextBox.Value
r = BiRisk_Free_Rate_TextBox.Value
T = BiexpTime_TextBox.Value
Sigma = BiVolatility_TextBox.Value
n = BiTimeSteps_TextBox.Value
Dim i, j, k As Integer
Dim p, V, u, d, dt As Double
dt = T / n ' This finds the value of dt
u = Exp(Sigma * Sqr(dt)) 'formula for the up factor
d = 1 - u 'formula for the down factor
'V value of option
'array having the values
Dim bin() As Double 'is a binomial arrays, it stores the value of each node, there is a loop
'work out the risk free probability
p = (1 + r - d) / (u - d)
'probability of going up
ReDim bin(n + 1) As Double
'it redims the array, and n+1 is used because it starts from zero
'------------------------------------------------------------------------------------------------------------------------------
''European Call
If BiCall_CheckBox = True Then
For i = 0 To n 'payoffs = value of option at final time
bin(i + 1) = Application.WorksheetFunction.Max(0, (u ^ (n - i)) * (d ^ i) * S - X)
'It takes the max payoff or 0
Cells(i + 20, n + 2) = bin(i + 1) 'to view payoffs on the isolated column on the right
Next i
End If
'european put
If BiPut_CheckBox = True Then
For i = 0 To n 'payoffs = value of option at final time
bin(i + 1) = Application.WorksheetFunction.Max(0, X - (S * (u * (n - i)) * (d * i)))
' European Put- It takes the max payoff or 0
Cells(i + 20, n + 2) = bin(i + 1) 'to view payoffs on the isolated column on the right
Next i
End If
For k = 1 To n 'backward column loop
For j = 1 To (n - k + 1) 'loop down the column loop
bin(j) = (p * bin(j) + (1 - p) * bin(j + 1)) / (1 + r)
Cells(j + 19, n - k + 2) = bin(j)
'' print the values along the column, view of tree
Next j
Next k
Worksheets("Binomial").Cells(17, 2) = bin(1) ' print of the value V
BiOptionPrice_TextBox = bin(1)