This question has already been asked several times but the solution is not working for me. I don't know why.
Actually i am trying to create a temp table in sql query where i am inserting some records in temp table using select into but everytime it returns empty row:
here is what i am trying:
Create Table #TempTable
(
EntityID BIGINT
)
INSERT INTO #TempTable (EntityID)
SELECT pkEntityID FROM Employee WHERE EmpID = 45
Select * from #TempTable
Corresponding to 45 , there are 10 rows in Employee table. IS it like I have to do something else or a loop like structure here as we can only insert one row in a table at once?
This has been stated in the comments, all of which i up-voted, but to answer your question... there isn't anything else you have to do. There clearly isn't an EmpID = 45 in your source table. Here's a reproducible example:
Declare #Employee Table (pkEntityID bigint, EmpID int)
insert into #Employee (pkEntityID, EmpID)
values
(32168123,45),
(89746541,45),
(55566331,45),
(45649224,12)
Create Table #TempTable
(
EntityID BIGINT
)
INSERT INTO #TempTable (EntityID)
SELECT pkEntityID FROM #Employee WHERE EmpID = 45
Select * from #TempTable
drop table #TempTable
Have you accidentally also created the Employee table in the master database and you are currently connected to the master database?
Related
If I run the following select statement inside an insert trigger, is it possible that it will return more than one result?:
DECLARE #variable char(1) = (SELECT ID FROM inserted)
If so, then what's the best to handle it?
Here is the problem that I am trying to solve: Every time when the new record is inserted into a table, I want to take the newly inserted ID and insert it into another table(if it doesn't exists).
Thank you!
Instead of
DECLARE #variable char(1) = (SELECT ID FROM inserted)
You can do something like following:
Declare #VarTempTbl as table (id int)
Insert into #VarTempTbl (id)
Select id from inserted
So that you can get those values for further processing
Now, I had created Two tables One for Master table and another for When any Insertion happens in that Master table, that entry has to inserted into the another table.
CREATE TABLE tblEmployee
(
Id int Primary Key,
Name nvarchar(30),
Gender nvarchar(10),
DepartmentId int
)
CREATE TABLE tblEmployee_New
(
Id int Primary Key,
Name nvarchar(30),
Gender nvarchar(10),
DepartmentId int
)
Trigger:
CREATE TRIGGER TR_EMPLOYEEDETAILS_AFTEROFINSERT
ON TBLEMPLOYEE
AFTER INSERT
AS
BEGIN
TRUNCATE TABLE tblEmployee_New
INSERT INTO TBLEMPLOYEE_NEW(ID, NAME, GENDER, DEPARTMENTID)
SELECT ID, NAME, GENDER, DEPARTMENTID
FROM INSERTED
END
Now Lets try to insert into record into a master table
Insert into tblEmployee values (1,'John', 'Male', 3)
Insert into tblEmployee values (2,'Mike', 'Male', 2)
It has automatically insert the newly inserted records into the another table.
If your want to remove the Previous records then add a drop Statement in that above Trigger.
Note: You can also use #Temp Table instead of creating a another table('tblEmployee_New')
Kinldy Share your comments
I have a question: I would like to duplicate all the data in the table PlanData where userID='38' and change then the userID of the duplicated data into userID='39'. So UserID is one of many many cols in the table.
How would I be able to do that?
Thanks
Try below -
insert into PlanData(userid, col2,col3)
select 39 as userid,col2,col3 from PlanData where userID='38'
If you don't want to hardcode the column names then you could use a temporary table as a first step.
The example snippet below also uses a temp table for PlanData, for testing reasons.
-- Test table
IF OBJECT_ID('tempdb..#PlanData') IS NOT NULL DROP TABLE #PlanData;
CREATE TABLE #PlanData (ID INT PRIMARY KEY IDENTITY(1,1), userID INT, Col1 VARCHAR(30));
-- Sample Data
insert into #PlanData (userID, Col1) values
(36,'A'),(36,'B'),(36,'C'),
(38,'X'),(38,'Y'),(38,'Z');
-- Create a temporary table with data from the original user
IF OBJECT_ID('tempdb..#tmpPlanData') IS NOT NULL DROP TABLE #tmpPlanData;
SELECT * INTO #tmpPlanData FROM #PlanData WHERE 0=1
UNION ALL
SELECT * FROM #PlanData WHERE userID = 38;
-- Remove the identity column from the temp table
-- This assumes that the ID column is the first column in the table
ALTER TABLE #tmpPlanData DROP COLUMN ID;
-- Set the userId to the new userId in the temporary table
UPDATE #tmpPlanData SET userID = 39;
-- Insert all from the temporary table into the destination table
INSERT INTO #PlanData
SELECT * FROM #tmpPlanData;
-- Check the inserts
SELECT * FROM #PlanData
WHERE userID = 39;
I am trying to insert data to a table from another where data is not already exists
The table I am inserting the data into
CREATE TABLE #T(Name VARCHAR(10),Unit INT, Id INT)
INSERT INTO #T
VALUES('AAA',10,100),('AAB',11,102),('AAC',12,130)
The table I am selecting the data from
CREATE TABLE #T1(Name VARCHAR(10),TypeId INT,Unit INT, Id INT)
INSERT INTO #T1
VALUES('AAA',3,10,100),('AAA',3,10,106)
In this case I want to select ('AAA',3,10,106) from #T1 because AAA,106 combination not exists in #T
Basically what I want is to populate unique Name and Id combination
I tried below which doesn't seems to work
SELECT *
FROM #T1
WHERE NOT EXISTS(SELECT * FROM #T)
You have to somehow correlate the two tables:
SELECT *
FROM #T1
WHERE NOT EXISTS(SELECT *
FROM #T
WHERE #T1.Name = #T.Name AND #T1.ID = #T.ID)
The above query essentially says: get me those records of table #T1 which do not have a related record in #T having the same Name and ID values.
Your best bet is probably to use a insert statement with a subquery. Something like this:
SQL Insert Into w/Subquery - Checking If Not Exists
Edit: If you're still stuck, try this--
INSERT INTO #T (Name, Unit, Id)
SELECT Name, Unit, Id
FROM #T1
WHERE
NOT EXISTS (SELECT Name, Unit, Id FROM #T
WHERE #T.Name = #T1.Name AND #T.Unit = #T1.Unit AND #T.Id = #T1.Id)
Is there a way to select only one column from other table in a single SQL statement without using Alter again after creating a table with new columns
like below but its just for understanding
create table compliance_rules_filter_groups
( group_id int,
group_name varchar(50),
rule_id int (select rule_id from compliance_rules),
m_group_filter_logical_condition varchar(10)
)
You are creating table column rule_id as int not, inserting data in this statement. You can use rule_id from compliance_rules table while you are going to insert data to compliance_rules_filter_groups table.
While inserting you may do as following or INNER JOIN could be used depends on your table structure. But after all main thing is, you can't insert data with CREATE statement.
INSERT INTO compliance_rules_filter_groups(group_id, group_name, rule_id, m_group_filter_logical_condition)
SELECT 1, '', (select rule_id from compliance_rules), ''
After having created a temporary table and declaring the data types like so;
CREATE TABLE #TempTable(
ID int,
Date datetime,
Name char(20))
How do I then insert the relevant data which is already held on a physical table within the database?
INSERT INTO #TempTable (ID, Date, Name)
SELECT id, date, name
FROM physical_table
To insert all data from all columns, just use this:
SELECT * INTO #TempTable
FROM OriginalTable
Don't forget to DROP the temporary table after you have finished with it and before you try creating it again:
DROP TABLE #TempTable
SELECT ID , Date , Name into #temp from [TableName]
My way of Insert in SQL Server. Also I usually check if a temporary table exists.
IF OBJECT_ID('tempdb..#MyTable') IS NOT NULL DROP Table #MyTable
SELECT b.Val as 'bVals'
INTO #MyTable
FROM OtherTable as b
SELECT *
INTO #TempTable
FROM table
I have provided two approaches to solve the same issue,
Solution 1: This approach includes 2 steps, first create a temporary table with
specified data type, next insert the value from the existing data
table.
CREATE TABLE #TempStudent(tempID int, tempName varchar(MAX) )
INSERT INTO #TempStudent(tempID, tempName) SELECT id, studName FROM students where id =1
SELECT * FROM #TempStudent
Solution 2: This approach is simple, where you can directly insert the values to
temporary table, where automatically the system take care of creating
the temp table with the same data type of original table.
SELECT id, studName INTO #TempStudent FROM students where id =1
SELECT * FROM #TempStudent
After you create the temp table you would just do a normal INSERT INTO () SELECT FROM
INSERT INTO #TempTable (id, Date, Name)
SELECT t.id, t.Date, t.Name
FROM yourTable t
The right query:
drop table #tmp_table
select new_acc_no, count(new_acc_no) as count1
into #tmp_table
from table
where unit_id = '0007'
group by unit_id, new_acc_no
having count(new_acc_no) > 1
insert into #temptable (col1, col2, col3)
select col1, col2, col3 from othertable
Note that this is considered poor practice:
insert into #temptable
select col1, col2, col3 from othertable
If the definition of the temp table were to change, the code could fail at runtime.
Basic operation of Temporary table is given below, modify and use as per your requirements,
-- CREATE A TEMP TABLE
CREATE TABLE #MyTempEmployeeTable(tempUserID varchar(MAX), tempUserName varchar(MAX) )
-- INSERT VALUE INTO A TEMP TABLE
INSERT INTO #MyTempEmployeeTable(tempUserID,tempUserName) SELECT userid,username FROM users where userid =21
-- QUERY A TEMP TABLE [This will work only in same session/Instance, not in other user session instance]
SELECT * FROM #MyTempEmployeeTable
-- DELETE VALUE IN TEMP TABLE
DELETE FROM #MyTempEmployeeTable
-- DROP A TEMP TABLE
DROP TABLE #MyTempEmployeeTable
INSERT INTO #TempTable(ID, Date, Name)
SELECT OtherID, OtherDate, OtherName FROM PhysicalTable
insert #temptable
select idfield, datefield, namefield from yourrealtable
All the above mentioned answers will almost fullfill the purpose. However, You need to drop the temp table after all the operation on it. You can follow-
INSERT INTO #TempTable (ID, Date, Name)
SELECT id, date, name
FROM physical_table;
IF OBJECT_ID('tempdb.dbo.#TempTable') IS NOT NULL
DROP TABLE #TempTable;