I tried to open this kernel module by double click on it, but it does not work. I could not find answer in internet either.
Do you know how could I check what is inside of this kernel module/open it?
Apply for a developer position at SAP and, once you've been accepted, access the internal kernel source code. That part is closed-source (at least at the time of this answer) and not available for customer or partner review.
Related
I'm trying to use LabView to operate a ThorLab CS235CU camera. However, so far I haven't had any success using LabView to operate it, despite searching the provided thorlabs and national instruments documentation and google for an answer all week. I started by trying ThorLab's VIs that came with their software, but anytime I run a script it returns the following error:
Error 1386 has occurred at Invoke Node. In the provided "simple image aquisition" VI, this error occurs at 3 locations (steps 2, 3, and 4) before deleting the rest of the script, if run with execution highlighted. National Instruments has 3 suggested fixes on their website: unblocking DLLs manually, which seems unrealistic given I don't know what is causing this error; running LabView as an administrator, which I had been doing from the beginning and didn't help the issue; and creating a configuration file, which I tried but did not work. I put it in C:\ProgramFiles\National Instruments\LabView 2020 as well as C:\ProgramFiles(x86)\National Instruments\LabView 2020, but the error still occurs. I'm very new to using LabView and couldn't begin to explain why this error is occurring, so anyone that can or knows how to help, please do.
It seems that you didn't set up the ThorLabs driver properly one way or another. Often it is the manufacturer's installer that must be run first (with LabVIEW turned off) and eventually you'll find the according driver/dll wrapper VIs (also referred to as LabVIEW-Driver) in some arcane subdirectory like <Program Files>\ThorLabs\<Product>\Drivers\Labview\...
It might make sense to copy that directory to your myProject\drivers\ Folder and the simple image acquisition.vi to something like myProject\examples and work your way from there. Also make sure you're using LabVIEW 32bit since few third-party drivers come in 64bit.
Context
As a university project we want to change the the pharo vm to use an object-table and see what happens.
We use a pharo-vm clone from github and VMMaker. Building the VM works fine.
To get started we added a primitive that returns an incremented Integer:
InterpreterPrimitives>>primitiveIntegerIncrement
"increments an integer"
self pushInteger: self popInteger + 1 .
and modified StackInterpreter class>>initializePrimitiveTable accordingly
MaxPrimitiveIndex := 576.
"... and so on ..."
(575 primitiveFail)
(576 primitiveIntegerIncrement))
And it works.
Problem
When we make changes to the VM we want to test-run already in the SmalltalkImage so we do not need to compile and see it did not work.
Something like:
StackInterpreter test: '1 inc'
And then I can debug if the primitive is wrong or an error occurs. Of course there needs to be done much more but how can I achieve this?
What we tried
category VMMaker-InterpreterSimulation class StackInterpreterSimulator. Trying the code in the comments
DoIt
^ (StackInterpreterSimulator new openOn: Smalltalk imageName) test
errors:
displayForm := 'Display has not yet been installed' asDisplayText form.
the ByteString does not understand asDisplayText
(CogVMSimulator new openOn: Smalltalk imageName) test
(InterpreterSimulator new openOn: Smalltalk imageName) test
error:
PrimitiveFailed: primitive #basicNew: in Array class failed
I also found this screen cast but it only debugs the VM from outside using gbd: http://vimeo.com/22485382#
Our project is hosted here: http://smalltalkhub.com/#!/~kirstin/PharoObjectTable
Current Status
We started implementing an object table. The lookup of attributes can go throught the object table. Full object table support and no usage of direct pointes is very tricky since pointers are expected everywhere. So we use pointers into the object table to identify when a lookup should go through the OT. We also found all object creation primitives and add new objects to the table.
How long is your project and how many people are you ? To me what you try to do is quite some work. Do you have good knowledge about low level behavior ?
To answer your question, the main problem here is that the cog simulator is not maintained in the pharo vm fork. This is because no one in the pharo crew use the simulator. We only use external debugging from gdb. In fact the pharo folks work mostly on VM plugins, the core of the VM is mainly maintained and developed by Eliot Miranda which works on Squeak. Therefore we report to him when there's a bug in the VM core.
For your project you would have to split it in at least 2 steps:
step 1: make the object table work with the stack VM
step 2: make the JIT work with your object table
Note that for step 2 I would recommend not to change the way an object access its header, therefore having a VW-like object table where you have the fixed size header on the one in the the object table, and the fields of the objects (and maybe header extensions) in the heap.
So use the StackVMSimulator and build the StackVM first. When everything will work (including context), you can think about hacking the JIT. Recently Guillermo Polito ported the Stack VM to the build process (see PharoSVMBuilder instead of PharoVMBuilder), a guy reported problems with this builder but you could hack it a bit to make it work.
Now to make the simulator work on Pharo 2.0 (which is the Pharo version of the generator image you have), you have to open the monticello browser and merge from Eliot's branch the Cog package (repo MCHttpRepository location: 'http: //source. squeak. org/VMMaker'), but not the latest Cog, the one at around the same date as the current VMMaker package of pharo-vm because the latest Cog and VMMaker of Eliot's branch are not stable.
The alternative being to start from Eliot's build image and merge things from the pharo branch. Here are infos about how to build the squeak development image (http://www.mirandabanda.org/cogblog/build-image/).
Then Eliot gave me this script once:
| cos |
cos := CogVMSimulator newWithOptions: #(Cogit SistaStackToRegisterMappingCogit).
cos desiredNumStackPages: 8.
cos openOn: 'my/favourite.image'.
cos openAsMorph; toggleTranscript; halt; run
You don't need the SistaStackToRegisterMappingCogit option. I guess some similar script with the StackVMSimulator should work.
Lastly there are some documentation about the simulator but it is only for the CogSimulator (these documentations expects you already knows how the StackSimulator works, and just give you hints about how to use it with the JIT):
http://www.mirandabanda.org/cogblog/2008/12/12/simulate-out-of-the-bochs/
and in one of the video named "Cog VM (part x)", x being from 1 to 6, Eliot shows how he uses the simulator to disassemble x86, print the stack and inspect the heap.
Another tip, ask your questions on the pharo mailing list (pharo users or pharo dev), because here no one may notice your question (fortunately someone pointed me out your question this time).
And tell on the pharo mailing list if you managed to run the simulator in Pharo 2.0, some people (as me) are very interested in it. I was planning to do it at some point.
Good luck ! Nice project anyway.
The last time I tried to use the simulator is roughly a year ago, and I did not make it work.
However, there are a few patches, which I assume never got integrated that might be of help:
https://code.google.com/p/cog/issues/detail?id=106
https://code.google.com/p/cog/issues/detail?id=107
https://code.google.com/p/cog/issues/detail?id=108
Issue 107 includes a patch for your asDisplayText issue.
I was recently reading an article on the Windows Metafile vulnerability (http://en.wikipedia.org/wiki/Windows_Metafile_vulnerability#Third-party_patch) and I was interested by one of the points made.
A third party patch[9] was released by Ilfak Guilfanov on 31 December 2005 to temporarily disable the vulnerable function call in gdi32.dll.
So this got me thinking as to how Ilfak Guilfanov actually went about disabling the function in gdi32.dll.
My theory got as far as opening dependency walker and finding the function entry point and then analysing that in a Hex editor, however Hex isn't my native language unfortunately.
So would you require some form of expensive software to achieve something like this or would it be a case of a lot of trial and error ?
Note: This isn't intended as a hacking question, but more to understand what I see as a very interesting and clever process
You could open up the dll with your favorite (dis)assembler, find the entrypoint of the function and put a ret assembler instruction to directly return from the function without doing anything else.
I want to develop a VGA graphics driver (for Linux(Ubuntu)) with support for the basic primitives such as putpixel, drawline, fillrect and bitblt. I want to do it in protected mode.
I´ve been googling for a week and the following four links are the best I have found:
http://www.brackeen....vga/basics.html
http://www.osdever.n...VGA/vga/vga.htm
http://bos.asmhacker...sing%20bios.htm
Unfortunately, the first one uses a BIOS call so I cannot use it. The second link has lots of information on the VGA registers but no examples showing how to make them work together. The third example is a example to switch in 13h mode but i've tried it and nothing happened. Can you guys give me a hint? Thanks in advance!
--Vincenzo
my code at http://bos.asmhackers.net/docs/vga_without_bios/snippet_5/vga.php
works fine if you are in 32bit mode with full hardware access. Unfortunately I doubt that any Linux variant will let you directly access the VGA ports. I'm not sure how you develop this driver, but if you made sure that you have full access to the VGA ports it should work. In my example code I only switch between mode 0x03 and 0x13, but in the folders above you'll be able to find port values for most other common VGA modes, as well as C code to do the switch if you prefer that.
Christoffer code include files are found BOS operating system source code like text.inc and font8x16.inc
http://bos.asmhackers.net/downloads.php
This is coming many many years later but I think it's still very relevant and if somebody is struggling I hope they can find it useful.
First of all, it is completely possible to configure VGA only using registers without interrupts, as hard as it may be. A useful resource about registers and how to configure them can be found here, but unless you have a ton of time to spare to learn how to properly do all of it, move to the following section.
If you wish to really learn how to do it, I suggest going through with the documentation provided earlier. However, some of it is already done!
Chris Giese did a great job demonstrating exactly how to do this for MS-DOS system, and while you may think that doesn't help you, it really does.
Chris's code can be found here. If you want another useful codes check here as well.
Now, while it only works for MS-DOS it's actually easy to convert to other systems. The code already contains all data needed to configure the registers in many different modes. And that's the part that saves you a ton of time going through documentation.
The code uses functions outportb, inportb, which are MS-DOS functions, to write/read single byte to/from a port. Therefore, you have to redefine these functions to read/write for your own system. Redefinition complexity depends on the system you operate on.
In addition, you will also need to provide means to write to physical memory region between 0xA0000-0xBFFFF which corresponds to standard VGA memory area. Once you have that allocated, you need to also redefine the functions pokeb pokew peekb which will help you output things (text or pixel data) on the screen.
One last note: the code is already defined to work with many different modes including both text and display modes.
I'm new to VB6 but i'm currently in charge of maintaining a horror of editor like tool with plenty of forms, classes, modules and 3rd party tools all chunk together like the skin faces on that guy in the texas chainsaw massacre...
What i don't understand is why i get different results when i run the app in debugging mode, vs when i compiled it and run it on my devevelopment pc vs when i installed it on a different pc.
Yes i know i'm dumb, so please direct me to where i can find out more about this. I'm hoping to find out something like different linking, registry related etc connection that i'm simply not getting right now, i.e. something like wax on, wax off :P
The main pain in the neck is when i'm trying to debug some errors from my QA and i need to find a spare pc to test this on plus i can't directly debug because i don't know where the code is if i do it that manner.
Thanks.
i run the app in debugging mode vs when i compiled it and run it on my
devevelopment pc
When you compile you have the option of compiling to native code or pcode. The debugger runs using pcode only. Under rare circumstances when you compile to native code there will be a change in behavior. This particular is really rare. I used VB6 since it's release and I may get it once or twice a year. My application is a complex CAD/CAM creating shapes and running metal cutting machine and has two dozen DLLs. Not a typical situation. At home with my hobby software I never ran into this problem.
There are another class of errors that result from event sequencing problems. While VB6 isn't truly multi-tasking it has the ability to jump out of the current code block to process a event. If it re-enters the same block for the new event interesting things (to say the least) can result. I think this is the likely source of your problems as you software is an editor which is a highly interactive type of software.
In general the problem is fixed by reordering the effected areas. You find the effected area by inserting MsgBox or write to a text file to log where you are. I recommend logging to a text file as MsgBox tend to alter behavior that are timing or multi-tasking related.
Remember if a event fire while VB6 in the middle of a code block and there a DoEvents floating around then it will leave the code block process the event and return to the original code block. If it re-enters the same code block and you didn't mean for this to happen then you will have problems. And you will have different problems on different computers as the timing will be different for each.
The easiest way to deal with this type of issues is create some flag variables. In multi-tasking parlance they are known as semaphores or mutexes. WHen you enter a critical section of code, you set it true. When you leave the routine you set it to false. If it is already true when you enter that section of code you don't execute it.
when i installed it on a different pc.
These are usually the result of the wrong DLL installed. Most likely you have an older version while the target has a newer version. I would download the free Virtual PC and create a clean Window XP install to double check this.
If your problem is event timing this too can be different on different computers. This is found by logging (not MsgBox) suspect regions.
If you can display a screen shot or the text of your specific errors then I can help better.
The first thing to check would be the versions of all the dlls that your app depends on - including the service pack version of the VB6 dll.
Have you any more specific details about what's behaving differently?