I have a condition (in Business objects ) as below
=If([Actual ]=0;Sum([Applied] In ([Project];[ Name];[Number];[Sub ])))
which I need to convert it to CASE statement for my OBIEE
Below is the query I had tried but it doesn't work:
SELECT
CASE
WHEN F.ACTUAL_EQP_COST = 0
THEN SUM((F.HRS_APPLIED) IN(F.PROJECT,F.NAME,F.NUMBER,F.SUB))
ELSE 0
END
FROM F
Probably
select SUM(F.HRS_APPLIED)
from DTS_OSC_WIP_REP_CST_ANALYSIS_A F
where F.ACTUAL_EQP_COST = 0
group by F.PROJECT,F.WIP_ENTITY_NAME,F.OPERATION_NUMBER,F.OPERATION_SUB_SEQ
You can't use "in" inside a "then" statement.
I couldn't understand exactly but something in this direction might help:
select
CASE WHEN F.ACTUAL_EQP_COST = 0
THEN (SELECT SUM(F1.HRS_APPLIED)
FROM DTS_OSC_WIP_REP_CST_ANALYSIS_A F1
WHERE F1.column_name IN (F.PROJECT,F.WIP_ENTITY_NAME,F.OPERATION_NUMBER,F.OPERATION_SUB_SEQ))
ELSE 0 END
from DTS_OSC_WIP_REP_CST_ANALYSIS_A F
Related
I am getting an error at the FROM sb.v_transactions t line after my CASE WHEN statements. I tried adding commas, parentheses, and am considering perhaps using CTE to create my output. Was wondering if anyone could help me figure out why I'm getting the error? I have a feeling it has something to do with how I'm using the AND operators.
%sql
UPDATE sb.transactions u
SET t.FranchiseStore = u.FranchiseStore
AND t.LocationNumber = u.LocationNumber
AND openflg = CASE openflg
WHEN o.FiscYKey IS NULL THEN 1
ELSE 0
END
AND closeflg_y = CASE closeflg_y
WHEN c.FiscYKey IS NULL THEN 1
ELSE 0
END
AND closeflg_p = CASE closeflg_p
WHEN c.FiscYKey IS NULL THEN 1
ELSE 0
END
AND closeflg_w = CASE closeflg_w
WHEN c.FiscYKey IS NULL THEN 1
t.FiscWkKey THEN 1
ELSE 0
END
-- PARSE EXCEPTION ON THE FROM BELOW. WHY?
FROM sb.v_transactions t
LEFT JOIN sb.v_loc_opendates o
ON t.LocationNumber = o.LocationNumber
LEFT JOIN sb.v_loc_closedates c
ON t.LocationNumber = c.LocationNumber
WHERE t.LocationNumber = u.LocationNumber
AND t.DayDate = u.DayDate
I am translating a query from PostgreSQL to SQL Server. I didn't write the query in PostgreSQL and it's quite complicated for my knowledge so i don't understand every piece of it.
From my understand: we are trying to find the max version from p_policy and when insurancestatus = 7 or 14 / transactiontype = CAN, we compare two dates (whose format are BIG INT).
This is the PG Query:
SELECT *
FROM BLABLABLA
WHERE
pol.vnumber = (
SELECT MAX(pol1.vnumber)
FROM p_policy pol1
AND ( CASE WHEN pol1.insurancestatus IN (7,14)
or pol1.transactiontype IN ('CAN')
-- ('CAN','RCA')
THEN pol1.veffectivedate = pol1.vexpirydate
ELSE pol1.veffectivedate <> pol1.vexpirydate
END
)
AND pol1.vrecordstatus NOT IN (30,254)
etc.
I am used to have a where statement where I compare it to a value. I understand here from the Case statement we will have a boolean, but still that must be compared to something?
Anyway the main purpose is to make it work in SQL, but I believe SQL can't read a CASE statement where THEN is a comparison.
This is what I tried:
SELECT *
FROM BLABLABLA
WHERE pol.vnumber =
(
SELECT MAX(pol1.vnumber)
FROM p_policy pol1
WHERE sbuid = 4019
AND ( CASE WHEN pol1.insurancestatus IN (7,14)
or pol1.transactiontype IN ('CAN')
THEN CASE
WHEN pol1.veffectivedate = pol1.vexpirydate THEN 1
WHEN pol1.veffectivedate <> pol1.vexpirydate THEN 0
END
END
)
AND pol1.vrecordstatus NOT IN (30,254)
etc.
And then I get this error from SQL Server (which directly the last line of the current code - so after the double case statement)
Msg 4145, Level 15, State 1, Line 55
An expression of non-boolean type specified in a context where a condition is expected, near 'AND'.
Thank you !Let me know if it is not clear
I think you want boolean logic. The CASE expression would translate as:
(
(
(pol1.insurancestatus IN (7,14) OR pol1.transactiontype = 'CAN')
AND pol1.veffectivedate = pol1.vexpirydate
) OR (
NOT (pol1.insurancestatus IN (7,14) OR pol1.transactiontype = 'CAN')
AND pol1.veffectivedate <> pol1.vexpirydate
)
)
There are 2 main issues with your snippet, SQL Server-syntax-wise.
SELECT * FROM BLABLABLA WHERE
pol.vnumber = /* PROBLEM 1: we haven't defined pol yet; SQL Server has no idea what pol.vnumber is here, so you're going to get an error when you resolve your boolean issue */
(
SELECT MAX(pol1.vnumber)
FROM p_policy pol1
WHERE sbuid = 4019
AND ( CASE WHEN pol1.insurancestatus IN (7,14)
or pol1.transactiontype IN ('CAN')
THEN CASE
WHEN pol1.veffectivedate = pol1.vexpirydate THEN 1
WHEN pol1.veffectivedate <> pol1.vexpirydate THEN 0
END
END
) /* PROBLEM 2: Your case statement returns a 1 or a 0..
which means your WHERE is saying
WHERE sbuid = 4019
AND (1)
AND pol1.vrecordstatus NOT IN (30,254)
SQL Doesn't like that. I think you meant to add a boolean operation using your 1 or 0 after the parenthesis.
like this: */
= 1
AND pol1.vrecordstatus NOT IN (30,254)
I use PostgreSQL and I would like to combine these two case conditions, but when I uncomment the code, I get a syntax error. This is not a difficult instruction. I want to divide or multiply the obtained number depending on the condition. How can I enter it so that the code is compiled?
SELECT
SUM(
CASE
WHEN transactions.recipient_account_bill_id = recipientBill.id AND recipientBill.user_id = 2
THEN 1
ELSE -1
END * transactions.amount_money
/* CASE
WHEN senderBillCurrency.id = recipientBillCurrency.id
THEN NULL
ELSE
CASE
WHEN recipientBillCurrency.base = true
THEN /
ELSE *
END senderBillCurrency.current_exchange_rate
END */
) as TOTAL
FROM transactions
LEFT JOIN bills AS senderBill ON senderBill.id = transactions.sender_account_bill_id
LEFT JOIN bills AS recipientBill ON recipientBill.id = transactions.recipient_account_bill_id
LEFT JOIN currency as senderBillCurrency ON senderBillCurrency.id = senderBill.currency_id
LEFT JOIN currency as recipientBillCurrency ON recipientBillCurrency.id = recipientBill.currency_id
WHERE 2 IN (senderBill.id, recipientBill.id)
You cannot create dynamic SQL expressions like that. A CASE expression cannot return an operator as if SQL was some sort of macro language. You can only return an expression.
You already used the following approach using 1 and -1 with your multiplication. Why not also use it with N and 1/N:
<some expression> * CASE WHEN condition THEN 1 / N ELSE N END
Or in your case:
<some expression> * CASE
WHEN senderBillCurrency.id = recipientBillCurrency.id THEN 1
WHEN recipientBillCurrency.base THEN 1 / senderBillCurrency.current_exchange_rate
ELSE senderBillCurrency.current_exchange_rate
END
Notice, you can put several WHEN clauses in a CASE expression. No need to nest them
I tried searching around but couldn't find anything that would help me out.
I'm trying to do this in SQL:
DECLARE #onlyMM INT
SET #onlyMM = 1
SELECT *
FROM cdn.magnag
WHERE CASE #onlyMM
WHEN 1
THEN man_zrdtyp NOT IN (
1616
,2001
)
ELSE - 1
END
I have a problem with:
where case #onlyMM when 1 then man_zrdtyp not in (1616,2001) else -1 end
how to properly make a case for the operator not in?
I think you need to formulate the WHERE clause in a different way. You could use OR instead of case statement. Like this:
WHERE
(#onlyMM=1 AND man_zrdtyp not in (1616,2001))
OR #onlyMM<>1
You don't want to do this?
where (case when #onlyMM = 1 then man_zrdtyp else -1 end) not in (1616,2001)
I want to use case after where clause in SQL Server 2008; how can I use it like
select *
from MPR
where
case when #min >= 0
then MainComponent_Id = #mainc and SubComponent_Id = #subcomp
else MainComponent_Id = #mainc and SubComponent_Id = #subcomp and MinorComponent_Id = #minorc
end
end
I am using a stored procedure, and in my stored procedure if minorcomponent_id value is 0 then it will add 1 one else 2 one will work.
I had tried hard but its giving error in near case.
How to resolve it?
Thanks
You don't need to use a CASE statement. You can simplify logic as follows:
select
*
from
MPR
where
MainComponent_Id = #mainc AND SubComponent_Id = #subcomp
AND (#min >= 0 OR MinorComponent_Id = #minorc)