I am after something like
firefox['update'] = "never" equivalent in cookbook recipe for firefox as auto updates is causing issues with selenium tests. Could someone please help?
Looking at the attributes provided by the cookbook reveals the following:
default['firefox']['version'] = 'latest'
So setting this to some specific version would be a starting point (not sure if you have set this, as you seem to lack the knowledge how to find the attributes provided by a cookbook.
Regarding actually disabling updates, a quick search revealed this thread, which lists the option that needs to be added to the user.js file in your profile:
user_pref("app.update.enabled", false);
Related
I'm running tests with Matchstick and my save() calls don't seem to be working (I set up my tests by saving some entities, but then my application code doesn't see them when it goes to load).
Is there any way to check the current state of the backend and see what's in there? Mainly just trying to troubleshoot.
Turns out, you just have to read the docs
https://thegraph.com/docs/en/developer/matchstick/
logStore()
I understand from the documentation that the SourceDiskCache folder cannot be configured using the XML configuration file and is only available "through code installation". However I can't figure out how!
I need to configure a custom folder. I have tried a few different things, with different results (both in Application_Start):
This doesn't throw an error, but uses the default folder (/cache)
var sourceDiskCachePlugin = new SourceDiskCachePlugin {VirtualCacheDir = "~/App_Data/cache"};
Config.Current.Plugins.GetOrInstall(sourceDiskCachePlugin);
This (and most other variations I have tried) throws the error "SourceDiskCache settings may not be adjusted after it is started."
new SourceDiskCachePlugin().Install(Config.Current);
Config.Current.Plugins.Get<SourceDiskCachePlugin>().VirtualCacheDir = "~/App_Data/cache";
How can I configure this?
Also, the documentation states that SourceDiskCache is in beta - is this still the case, and will XML configuration ever be available?
This would be the normal way to configure and install it:
var plugin = new SourceDiskCachePlugin()
plugin.VirtualCacheDir = "~/App_Data/cache";
plugin.Install(Config.Current);
If your code is running more than once, use Config.Current.Plugins.GetOrInstall(plugin); It's best if you only install the plugin during Application_Start.
However, approach #1 from your question should work equally well, as long as you've set the right NTFS permissions on App_Data.
I am curious about the proper way to stop a user from activating my plugin if their system does not meet certain requirements. Doing the checks is easy and I don't need any help with that, I am more curious how to tell WordPress to exit and display an error message.
Currently I have tried both exit($error_message) and die($error_message) in the activation hook method. While my message is displayed and the plugin is not activated, a message saying Fatal Error is also displayed (see image below).
Does anyone know of a better way, that would display my message in a proper error box without displaying Fatal error, it just looks really bad for new users to see that.
Thanks for any help in advance.
This is a little undocumented, as you might have noticed. Instead of die(), do it like this:
$plugin = dirname(__FILE__) . '/functions.php';
deactivate_plugins($plugin);
wp_die('<p>The <strong>X</strong> plugin requires version WordPress 2.8 or greater.</p>','Plugin Activation Error',array('response'=>200,'back_link'=>TRUE));
The lines above wp_die() are to deactivate this plugin. Note that we use functions.php in this case because that's where I have my Plugin Name meta data comment declaration -- and if you use a different file, then change the code above. Note that the path is very specific for a match. So, if you want to see what your path would normally be, use print_r(get_option('active_plugins'));die(); to dump that out so that you know what path you need. Since I had a plugin_code.php where the rest of my plugin code was, and since it was in the same directory as functions.php, I merely had to do dirname(__FILE__) for the proper path.
Note that the end of the wp_die() statement is important because it provides a backlink and prevents an error 500 (which is the default Apache code for wp_die()).
It is only a idea though. Try checking the wordpress version and compare then use php to through custom exception/error. PHP 5.0 try catch can be a good way to do it. Here is some resources.
http://www.w3schools.com/php/php_exception.asp
http://php.net/manual/en/internals2.opcodes.throw.php
You can try the first link. It is pretty basic. Thanks! hope the information will be helpful.
I checked out the latest SVN trunk of qooxdoo and now i have the following problems:
Some events seems that they are not comming through
Virtual Lists are not filled anymore (the _createWidget() method of the extension from qx.ui.virtual.cell.AbstractWidget is not called)
My original version was QX 1.0.1-pre and the problems appeared also when i tried to migrate to 1.2
Just to get the obvious stuff out of the way, did you follow the steps of the migration guide and make any necessary changes outlined in migration.log?
Aside from that, the virtual widgets are still experimental and no migration path is provided, meaning you'll have to go over your code and check if the parts of the ui.virtual API you're using have changed since 1.0.1.
For the missing events, please provide some more information: What events are you listening for?
The problem with the event seems to be a bug in Qooxdoo
When selenium tries to open popup window I'm getting JS error permission denied in file
file:///C:/DOCUME~1//LOCALS~1/Temp/customProfileDir8708f7f69e14482ba857f4b2e74775c1/core/RemoteRunner.hta
So this break script execution, could you assist? I saw a related topic at MSDN and openqa but didn't find resolution that could help me.
I've just encountered this error. In the end it was because I was running IE in 'Offline' mode. Open the File menu and make sure that "Work Offline" does not have a tick next to it.
I've just updated a section about that in the Selenium docs. The website build is not working right now, so if you go to the site you will find the old version.
I'll paste the raw text here, I think your case is the second: JS trying to access sections that are still not loaded, so your solution would be a waitForPopUp command:
Why am I getting a permission denied
error?
The most common reason for this error
is that your session is attempting to
violate the same-origin policy by
crossing domain boundaries (e.g.,
accesses a page from http://domain1
and then accesses a page from
http://domain2) or switching protocols
(moving from http://domainX to
https://domainX). For this to be
solved, try using the Heightened
Privileges Browsers if you're working
with the Proxy Injection browsers.
This is covered in some detail in the
tutorial. Make sure you read the
sections about The Same Origin Policy
and Proxy Injection carefully.
If the previous situation was not your
case, it can also occur when
JavaScript attempts to look at
objects which are not yet available
(before the page has completely
loaded), or tries to look at objects
which are no longer available (after
the page has started to be unloaded).
This is most typically encountered
with AJAX pages which are working with
sections of a page or subframes that
load and/or reload independently of
the larger page. For this type of
problem, it is common that the error
is intermittent. Often it is
impossible to reproduce the problem
with a debugger because the trouble
stems from race conditions which are
not reproducible when the debugger's
overhead is added to the system. Try
first adding a static pause to make
sure this is the situation and then
moving on to the waitFor kind of
commands.