I am having trouble figuring out how to configure the H2 Debug Console for Ignite.Net. The following article describes using the H2 Debug Console:
https://apacheignite-net.readme.io/docs/sql-queries#using-h2-debug-console
However, I am not sure how to incorporate into my .Net solution so that I can access it. Do you have any tips on how to do this?
Place the following line anywhere before Ignition.Start():
Environment.SetEnvironmentVariable("IGNITE_H2_DEBUG_CONSOLE", "true")
This will open H2 debug console in browser on Ignite startup. You may need to refresh the window to see newly created caches.
Keep in mind that this console is not for viewing cache contents, since not all data is visible there. It is for trying out SQL queries, and you have to have query entities configured accordingly.
Related
I am using R2DBC-H2 driver, and my UR.L is spring.r2dbc.url=r2dbc:h2:mem:///customer
Using this configuration, SpringBoot starts fine, however, I can not access the h2-console.
Does anybody know why, and how I can fix it?
If I understand the source code of H2ConsoleAutoConfiguration correctly, the h2 console auto configuration from spring boot does not work in a reactive environment.
...
#ConditionalOnWebApplication(type = Type.SERVLET)
...
public class H2ConsoleAutoConfiguration {
You can confirm this by yourself by changing the type of your web application to SERVLET (for example, by adding spring-boot-starter-web as a dependency) which will activate the route to the h2 console (if enabled in the application properties). The h2-console route endpoint will start working again.
As the whole code seems very servlet-specific, I don't know how to properly fix this problem.
H2 Console depends on traditional Jdbc drivers, not compatible with Spring WebFlux stack.
If you are developing a WebFlux application, you can use H2 as a standalone database, ane use H2 Console freely.
Following the official Getting Started guide to start H2 Database and H2 Console.
Set your spring.r2dbc.url to the database url you are running in the first step.
NOTE: Do not use a Memory DB here.
What would be the best way to debug Parse Cloud Code? Currently it's a mess of logging to the console and checking logs. Does anyone have a good workable solution?
During development, you should begin by testing against a local hosted server. I.e., I use VS Code. You can set breakpoints and watch variables for their values. You can set up a tool like ngrok to get a remote URL for your local endpoint so you can test with non-local hosted clients if you'd like.
We also use Slack extensively. We've created our own slack bot, and it has several channels it reports relevant information too, triggered from our parse-server. One of these is a dev error channel. Instead of console.logs, which are hard to sift through and find what you're looking for, we push important information to Slack. We don't switch every single console.log to a slack message, just the important "Hey something went wrong here's the information" messages. This brings them to our attention so we can identify and resolve them way faster. Slack is awesome. I recommend using slack, even on a solo project.
at the moment you can access your Logs using a console.log() or console.error() for functions and all general logs of everything that happens with your app, at Back4App you can access using: Server Settings -> Logs -> Settings -> Server System Log.
Or functions and all logs generated by Parse server, they're: request.log.info() and request.log.error(), at Back4App you can access using: Dashboard -> Logs.
How can I configure alerts in Eclipse oepe? It's not easy to migrate all the alert rules and slas across environments.Is there any way to have all the alerts/SLAs migrated in case of change in environment like DEV to TEST without making any changes through sbconsole?
Whenever I exported the jar file(sbconfig.jar) from console and imported it in eclipse, all the alerts are not there in any service. The becomes blank.
Pls help.
Do you also export the Global Operation Settings from the OSBConfiguration? Because that info is not stored in a specific project.
OSB Configurator definitely allows this, so it it is possible to put these settings into sbconfig.jar. In fact you can use this to add those settings to a pre-existing sbconfig.jar.
Note, however, that you might need to import it using /sbconsole/ or WLST rather than from inside OEPE. OEPE has a bad habit of ignoring things it doesn't want to set.
While using Windows Azure Table Storage in WCFService WebRole, tried to create CloudStorageAccount by the following way:
storageAccount =
CloudStorageAccount.Parse(Microsoft.WindowsAzure.CloudConfigurationManager.GetSetting("[Setting name]"))
Get exception:
ConfigurationErrorsException "Could not create Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener, Microsoft.WindowsAzure.Diagnostics, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35."
MSDN help says that 1) Visual Studio must be run as an administrator. 2) A role must be running under full trust (change the .NET trust level option to Full Trust).
All Done, but I still have the same exception.
One thing that can cause this error is running the web role itself, instead of running the containing cloud project. If this is the issue, you could fix it by ensuring that the cloud project is set as the startup project for debugging, and not the web role.
It's possible, and sometimes useful, to run the ASP.NET project that defines the web role on its own. This can be a lot quicker than running things in the Azure Compute Emulator. It may also enable you to develop your project without having to run VS elevated. Also, I've found that the emulator tends to cause Visual Studio to report an invalid memory access error from time to time, at which point you need to restart VS. Running the web role directly avoids all these problems.
However, there are some things that can prevent this from working, and the exception you describe is a symptom of one of these problems. If your web role's Web.config includes configuration for Azure's DiagnosticMonitorTraceListener (and Visual Studio adds that by default when you create a web role) then the first thing that tries to generate trace output will crash with the error you describe if you run outside the emulator. And as it happens, retrieving a setting from the CloudConfigurationManager appears to do this.
This isn't peculiar to the CloudConfigurationManager by the way. All it's doing is producing some trace output. VS configures web roles to send all trace output to the Azure diagnostic listener, and because that listener can only run in either the compute emulator or an actual Azure instance, the first thing that tries to produce trace output will crash. CloudConfigurationManager is a common candidate because it happens to produce trace output, and it typically gets used early on when a role starts up. But in principle, anything that produces trace output could hit this exception.
A simple way to avoid this is to remove the relevant section from the configuration file. When you create a new web role, Visual Studio adds a <system.diagnostics> section that configures the default trace output to go to the Azure diagnostic listener. You could just comment that out. That will enable you to debug the web role directly in Visual Studio without using the compute emulator (assuming you aren't doing anything else that depends on being in a role environment).
Of course, the problem with that is that you'll no longer get any diagnostic traces when running in Azure. One way to solve that is to move the relevant configuration to the Web.config.Release file (adding the necessary xdt: attributes).
This change will also stop the Azure diagnostic trace listener from running when you use the local compute emulator. (That's less of a problem, because the trace messages will still appear in the debugger. It just means you won't get persistent copies of the traces copied to table storage like you would when running for real.) The obvious way to fix this would seem to be to make a similar modification to Web.config.Debug (or to run the release build in the emulator), but there's a snag: apparently cloud projects do not apply configuration file transforms when packaging for the emulator by default. Fortunately, you can fix this: http://blog.hill-it.be/2011/03/07/no-web-config-transformation-in-local-azure/ shows how to enable transforms for local debugging in the compute emulator. (Transforms are never applied when debugging an ASP.NET project directly from within VS, by the way.)
I've found that this error is caused by the wrong version in your web.config
Ie., you may not have
Version=1.0.0.0
Microsoft.WindowsAzure.Diagnostics is up to version 1.8.0.0 as of now
Try updating to the current version
Remove the lines in Web.config < add type="Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener
We are running a Domino 8.5.3 and the server log is constantly issuing these errors:
HTTP JVM:
!err.PersistenceServiceResourceProvider.Errorwritingtopersistedcontenttor!
We have not been able to isloate it to a particular page. Eventually, the HTTP task will crash and we need to reboot the server and recompile all the databases on the server. We are using the CKEditor to generate the HTML content. You help would be most appreciated.
We used to get this exact error a lot which appeared to be caused by inline images uploaded via the CKEditor like Paul mentioned.
I don't know why but we fixed it by changing the directory domino uses for uploads via the
xsp property xsp.persistence.dir.xspupload (formally xsp.upload.directory)
changing it to something like c:\temp rather than the windows default made the problem go away. could have been a co-incidence but may have been something in windows interfering
I haven't seen that error before but it reads like it might be something to do with asking the server to make a lot of data available to the xpages between calls to the server- effectively, session and application scope data.