I'm using google oAuth for getting youtube latest streaming. It works for 3600 seconds. But then it stopped working. After some researching at stackoverflow, many people wrote to use "SetAccessType": "offline" .
I did it but same result.
Here is my snippet.
<?php
/**
* Library Requirements
*
* 1. Install composer (https://getcomposer.org)
* 2. On the command line, change to this directory (api-samples/php)
* 3. Require the google/apiclient library
* $ composer require google/apiclient:~2.0
*/
$stream_id = "";
if (!file_exists(__DIR__ . '/vendor/autoload.php')) {
throw new \Exception('please run "composer require google/apiclient:~2.0" in "' . __DIR__ .'"');
}
require_once __DIR__ . '/vendor/autoload.php';
session_start();
$OAUTH2_CLIENT_ID = '972289696318-q037nr25oti8gs5h7hcj5lfkl7erklh6.apps.googleusercontent.com';
$OAUTH2_CLIENT_SECRET = 'cbmQyfeXWGb93RkN7KSHLQKB';
$client = new Google_Client();
$client->setAccessType('online');
$client->setClientId($OAUTH2_CLIENT_ID);
//$client->setExpires_in('10000000');
$client->setClientSecret($OAUTH2_CLIENT_SECRET);
$client->setScopes('https://www.googleapis.com/auth/youtube');
$redirect = filter_var('http://' . $_SERVER['HTTP_HOST'] . $_SERVER['PHP_SELF'],
FILTER_SANITIZE_URL);
$client->setRedirectUri($redirect);
// Define an object that will be used to make all API requests.
$youtube = new Google_Service_YouTube($client);
//print_r($youtube);
// Check if an auth token exists for the required scopes
$tokenSessionKey = 'token-' . $client->prepareScopes();
if (isset($_GET['code'])) {
if (strval($_SESSION['state']) !== strval($_GET['state'])) {
die('The session state did not match.');
}
$client->authenticate($_GET['code']);
$_SESSION[$tokenSessionKey] = $client->getAccessToken();
header('Location: ' . $redirect);
}
if (isset($_SESSION[$tokenSessionKey])) {
$client->setAccessToken($_SESSION[$tokenSessionKey]);
}
/*
if ($client->isAccessTokenExpired()) {
$refreshToken = $client->getRefreshToken();
//print_r($refreshToken);
// $client->refreshToken($refreshToken);
$newAccessToken = $client->getAccessToken();
$newAccessToken['refresh_token'] = $refreshToken;
file_put_contents($credentialsPath, json_encode($newAccessToken));
}
*/
// Check to ensure that the access token was successfully acquired.
if ($client->getAccessToken()) {
try {
// Execute an API request that lists broadcasts owned by the user who
// authorized the request.
//print_r($youtube);
$broadcastsResponse = $youtube->liveBroadcasts->listLiveBroadcasts(
'id,snippet',
array(
'mine' => 'true',
));
//print_r($broadcastsResponse);
$htmlBody .= "<h3>Live Broadcasts</h3><ul>";
$count = 0;
foreach ($broadcastsResponse['items'] as $broadcastItem) {
// print_r($count+1);
$count = $count+1;
if($count == 1) {
$htmlBody .= sprintf('<li>%s (%s)</li>', $broadcastItem['snippet']['title'],
$broadcastItem['id']);
$stream_id = $broadcastItem['id'];
}
// print_r($broadcastItem);
}
$htmlBody .= '</ul>';
} catch (Google_Service_Exception $e) {
$htmlBody = sprintf('<p>A service error occurred: <code>%s</code></p>',
htmlspecialchars($e->getMessage()));
} catch (Google_Exception $e) {
$htmlBody = sprintf('<p>An client error occurred: <code>%s</code></p>',
htmlspecialchars($e->getMessage()));
}
$_SESSION[$tokenSessionKey] = $client->getAccessToken();
} elseif ($OAUTH2_CLIENT_ID == 'Replace_me') {
$htmlBody = <<<END
<h3>Client Credentials Required</h3>
<p>
You need to set <code>\$OAUTH2_CLIENT_ID</code> and
<code>\$OAUTH2_CLIENT_ID</code> before proceeding.
<p>
END;
} else {
// If the user hasn't authorized the app, initiate the OAuth flow
$state = mt_rand();
$client->setState($state);
$_SESSION['state'] = $state;
$authUrl = $client->createAuthUrl();
$htmlBody = <<<END
<h3>Authorization Required</h3>
<p>You need to authorize access before proceeding.<p>
END;
}
?>
<!doctype html>
<html>
<head>
<title>My Live Broadcasts</title>
</head>
<body>
<?php echo $stream_id; ?>
</body>
</html>
Any idea what can i do?
NB: My purpose is, any one can authenticate here and can get latest youtube streaming id. But I'm struct with oAuth after 3600 seconds.
:(
Your Access Token has an expiry time. The expiry usually is half an hour (1800 seconds), although this can vary. The value is set by the Authentication Server. The expiry time is sent to you along with the Access Token.
After the Access Token expires, the server will no longer accept it. You must request a new one using your Refresh Token. You should have gotten it along with the first Access Token.
If you do not have a Refresh Token, you'll have to log in again.
Related
I have seen code in google directory api documentation for command line interface and have worked with it, the code works fine. But I want write code that runs without terminal and runs when on a page when the page is loaded because i have to run the code in the terminal every hour after it's expired, is there anyway i can get the code to run when i visit the page of authorization code.
The code work's with command-line interface, but i want it to work without command-line, what can i do?
Given Below is the code from Google Directory API and the URL:
URL : https://developers.google.com/admin-sdk/directory/v1/quickstart/php
<?php
require __DIR__ . '/vendor/autoload.php';
if (php_sapi_name() != 'cli') {
throw new Exception('This application must be run on the command line.');
}
/**
* Returns an authorized API client.
* #return Google_Client the authorized client object
*/
function getClient()
{
$client = new Google_Client();
$client->setApplicationName('G Suite Directory API PHP Quickstart');
$client->setScopes(Google_Service_Directory::ADMIN_DIRECTORY_USER_READONLY);
$client->setAuthConfig('credentials.json');
$client->setAccessType('offline');
$client->setPrompt('select_account consent');
// Load previously authorized token from a file, if it exists.
// The file token.json stores the user's access and refresh tokens, and is
// created automatically when the authorization flow completes for the first
// time.
$tokenPath = 'token.json';
if (file_exists($tokenPath)) {
$accessToken = json_decode(file_get_contents($tokenPath), true);
$client->setAccessToken($accessToken);
}
// If there is no previous token or it's expired.
if ($client->isAccessTokenExpired()) {
// Refresh the token if possible, else fetch a new one.
if ($client->getRefreshToken()) {
$client->fetchAccessTokenWithRefreshToken($client->getRefreshToken());
} else {
// Request authorization from the user.
$authUrl = $client->createAuthUrl();
printf("Open the following link in your browser:\n%s\n", $authUrl);
print 'Enter verification code: ';
$authCode = trim(fgets(STDIN));
// Exchange authorization code for an access token.
$accessToken = $client->fetchAccessTokenWithAuthCode($authCode);
$client->setAccessToken($accessToken);
// Check to see if there was an error.
if (array_key_exists('error', $accessToken)) {
throw new Exception(join(', ', $accessToken));
}
}
// Save the token to a file.
if (!file_exists(dirname($tokenPath))) {
mkdir(dirname($tokenPath), 0700, true);
}
file_put_contents($tokenPath, json_encode($client->getAccessToken()));
}
return $client;
}
// Get the API client and construct the service object.
$client = getClient();
$service = new Google_Service_Directory($client);
// Print the first 10 users in the domain.
$optParams = array(
'customer' => 'my_customer',
'maxResults' => 10,
'orderBy' => 'email',
);
$results = $service->users->listUsers($optParams);
if (count($results->getUsers()) == 0) {
print "No users found.\n";
} else {
print "Users:\n";
foreach ($results->getUsers() as $user) {
printf("%s (%s)\n", $user->getPrimaryEmail(),
$user->getName()->getFullName());
}
}
I have also tried to implement the code from OAuth 2.0 for Web Server Applications in wordpress page with the template but it's not working, which is from https://developers.google.com/identity/protocols/oauth2/web-server#php_1
and this is my code:
<?php
require __DIR__ . '/vendor/autoload.php';
session_start();
/**
* Returns an authorized API client.
* #return Google_Client the authorized client object
*/
$client = new Google_Client();
$client->setApplicationName('G Suite Directory API PHP Quickstart');
$client->addScope(Google_Service_Directory::ADMIN_DIRECTORY_USER);
$client->setAuthConfig('/path/to/credentials.json');
$client->setAccessType('offline');
$client->setApprovalPrompt("consent");
$client->setIncludeGrantedScopes(true); // incremental auth
if (isset($_SESSION['access_token']) && $_SESSION['access_token']) {
$client->setAccessToken($_SESSION['access_token']);
$service = new Google_Service_Directory($client);
} else {
$redirect_uri = 'http://' . $_SERVER['HTTP_HOST'] . '/oauth2callback.php';
header('Location: ' . filter_var($redirect_uri, FILTER_SANITIZE_URL));
}
This is my script I have used from Magento Reference (see: RequestToken Retrieve the list of products for Admin user with OAuth authentication)
I am submiting this script from my localhost.
/**
* Example of retrieving the products list using Admin account via Magento REST API. OAuth authorization is used
* Preconditions:
* 1. Install php oauth extension
* 2. If you were authorized as a Customer before this step, clear browser cookies for 'yourhost'
* 3. Create at least one product in Magento
* 4. Configure resource permissions for Admin REST user for retrieving all product data for Admin
* 5. Create a Consumer
*/
// $callbackUrl is a path to your file with OAuth authentication example for the Admin user
$callbackUrl = "http://yourhost/oauth_admin.php";
$temporaryCredentialsRequestUrl = "http://yourhost/oauth/initiate?oauth_callback=" . urlencode($callbackUrl);
$adminAuthorizationUrl = 'http://yourhost/admin/oAuth_authorize';
$accessTokenRequestUrl = 'http://yourhost/oauth/token';
$apiUrl = 'http://yourhost/api/rest';
$consumerKey = 'yourconsumerkey';
$consumerSecret = 'yourconsumersecret';
session_start();
if (!isset($_GET['oauth_token']) && isset($_SESSION['state']) && $_SESSION['state'] == 1) {
$_SESSION['state'] = 0;
}
try {
$authType = ($_SESSION['state'] == 2) ? OAUTH_AUTH_TYPE_AUTHORIZATION : OAUTH_AUTH_TYPE_URI;
$oauthClient = new OAuth($consumerKey, $consumerSecret, OAUTH_SIG_METHOD_HMACSHA1, $authType);
$oauthClient->enableDebug();
if (!isset($_GET['oauth_token']) && !$_SESSION['state']) {
$requestToken = $oauthClient->getRequestToken($temporaryCredentialsRequestUrl);
$_SESSION['secret'] = $requestToken['oauth_token_secret'];
$_SESSION['state'] = 1;
header('Location: ' . $adminAuthorizationUrl . '?oauth_token=' . $requestToken['oauth_token']);
exit;
} else if ($_SESSION['state'] == 1) {
$oauthClient->setToken($_GET['oauth_token'], $_SESSION['secret']);
$accessToken = $oauthClient->getAccessToken($accessTokenRequestUrl);
$_SESSION['state'] = 2;
$_SESSION['token'] = $accessToken['oauth_token'];
$_SESSION['secret'] = $accessToken['oauth_token_secret'];
header('Location: ' . $callbackUrl);
exit;
} else {
$oauthClient->setToken($_SESSION['token'], $_SESSION['secret']);
$resourceUrl = "$apiUrl/products";
$oauthClient->fetch($resourceUrl, array(), 'GET', array('Content-Type' => 'application/json'));
$productsList = json_decode($oauthClient->getLastResponse());
print_r($productsList);
}
} catch (OAuthException $e) {
print_r($e->getMessage());
echo "<br/>";
print_r($e->lastResponse);
}
As a result I am getting "Whoops, our bad..." page, I was expecting to see list of products.
In the URL I am seeing oauth_token.
http://myUrl/oAuth_authorize?oauth_token=a4315776966dca4fa5d3786f4fghjkab157cf
Can somebody point me out what to do next? If you need any additional data, please ask.
There is a typo in url
$adminAuthorizationUrl = 'http://yourhost/admin/oAuth_authorize';
should be
$adminAuthorizationUrl = 'http://yourhost/admin/oauth_authorize';
On my PayPal autoReturn page with a known-to-work PHP script to accommodate Payment Data Transfer, no matter what I do I keep getting this error message: "Warning: fgets(): SSL: Connection reset by peer...*(on the line where this is: '$line = fgets($fp, 1024);'* "
Before I ask my question, let me just say that I've tried everything suggested here and in any other forum or article that I've been advised to read, e.g. changing HTTP 1.0 to HTTP 1.1, using $res=stream_get_contents($fp, 1024) instead of the while loop with $line = fgets($fp, 1024), etc., etc. My problem persists.
Here's what I think might be the problem (and I'm hoping someone can tell me if I'm on the right track): My auto return page for PDT is on an add-on site and I'm thinking that PayPal hangs up when the shared SSL (for my primary domain on a shared server) isn't recognized. So I've asked my web host for SSL to be installed specifically for my add-on domain.
Could the add-on domain SSL thing be the reason for my warning message? Again, that message is: "Warning: fgets(): SSL: Connection reset by peer...*(on the line where this is: '$line = fgets($fp, 1024);'* "
Here's my code:
//look if the parameter 'tx' is set in the GET request and that it does not have a null or empty value
if(isset($_GET['tx']) && ($_GET['tx'])!=null && ($_GET['tx'])!= "") {
$tx = $_GET['tx'];
verifyWithPayPal($tx);
}
else {
exitCode();
}
function verifyWithPayPal($tx) {
$req = 'cmd=_notify-synch';
$tx_token = $tx;
$auth_token = "MY SANDBOX AUTH_TOKEN HERE";
$req .= "&tx=$tx_token&at=$auth_token";
// post back to PayPal system to validate
$header = "POST /cgi-bin/webscr HTTP/1.0\r\n";
$header .= "Content-Type: application/x-www-form-urlencoded\r\n";
$header .= "Content-Length: " . strlen($req) . "\r\n\r\n";
// url for paypal sandbox
//$fp = fsockopen ('ssl://www.sandbox.paypal.com', 443, $errno, $errstr, 30);
// url for payal
// $fp = fsockopen ('www.paypal.com', 80, $errno, $errstr, 30);
// If possible, securely post back to paypal using HTTPS
// Your PHP server will need to be SSL enabled.
$fp = fsockopen ('ssl://www.sandbox.paypal.com', 443, $errno, $errstr, 30);
if (!$fp) {
exitCode();
} else {
fputs($fp, $header . $req);
// read the body data
$res = '';
$headerdone = false;
while (!feof($fp)) {
$line = fgets($fp, 1024);
// $res=stream_get_contents($fp, 1024);
if (strcmp($line, "\r\n") == 0) {
// read the header
$headerdone = true;
}
else if ($headerdone) {
// header has been read. now read the contents
$res .= $line;
}
}
// parse the data
$lines = explode("\n", $res);
$response = array();
if (strcmp ($lines[0], "SUCCESS") == 0) {
for ($i=1; $i<count($lines);$i++){
list($key,$val) = explode("=", $lines[$i]);
$response[urldecode($key)] = urldecode($val);
}
$itemName = $response["item_name"];
$amount = $response["payment_gross"];
$myEmail = $response["receiver_email"];
$userEmailPaypalId = $response["payer_email"];
$paymentStatus = $response["payment_status"];
$paypalTxId = $response["txn_id"];
$currency = $response["mc_currency"];
// check the payment_status is Completed
if($paymentStatus!="Completed") {
payment_complete();
emailer($userEmailPayPalID);
} else {
payment_incomplete($paymentStatus);
}
/*
// check that txn_id has not been previously processed
checkIfTransactionHasAlreadyBeenProcessed($paypalTxId);
// check that receiver_email is your Primary PayPal email
checkThatPaymentIsReceivedAtYourEmailAddress($myEmail);
// check that payment_amount/payment_currency are correct
checkPaymentAmountAndCurrency($amount, $currency);
// process the order
processOrder();
} else {
exitCode();
*/
}
}
fclose ($fp);
}
I notice you're connecting to www.sandbox.paypal.com. I believe you want to connect to api.sandbox.paypal.com.
Hi guys i want to fetch videos from my account , from play list, categories, and want to display them on my site. If i upload any video on you tube . That should display on my site. Please help me with this. I am using yii 1.1
1)Create a channel in youtube.
2)Embed following code in your webpage code.
<script src="http://www.gmodules.com/ig/ifr?url=http://www.google.com/ig/modules/youtube.xml&up_channel=MyChannelName&synd=open&w=320&h=390&title=&border=%23ffffff%7C3px%2C1px+solid+%23999999&output=js"></script>
3)Replace the MyChannelName with your original channel name.
Reference:
YouTube on your site
Embed YouTube Channel
Edit
If you must do it via OAUTH2, try Google APIs Client Library for Youtube
<?php
// Call set_include_path() as needed to point to your client library.
require_once 'google-api-php-client/src/Google_Client.php';
require_once 'google-api-php-client/src/contrib/Google_YouTubeService.php';
session_start();
/* You can acquire an OAuth 2 ID/secret pair from the API Access tab on the Google APIs Console
<http://code.google.com/apis/console#access>
For more information about using OAuth2 to access Google APIs, please visit:
<https://developers.google.com/accounts/docs/OAuth2>
Please ensure that you have enabled the YouTube Data API for your project. */
$OAUTH2_CLIENT_ID = 'REPLACE ME';
$OAUTH2_CLIENT_SECRET = 'REPLACE ME';
$client = new Google_Client();
$client->setClientId($OAUTH2_CLIENT_ID);
$client->setClientSecret($OAUTH2_CLIENT_SECRET);
$redirect = filter_var('http://' . $_SERVER['HTTP_HOST'] . $_SERVER['PHP_SELF'],
FILTER_SANITIZE_URL);
$client->setRedirectUri($redirect);
$youtube = new Google_YoutubeService($client);
if (isset($_GET['code'])) {
if (strval($_SESSION['state']) !== strval($_GET['state'])) {
die('The session state did not match.');
}
$client->authenticate();
$_SESSION['token'] = $client->getAccessToken();
header('Location: ' . $redirect);
}
if (isset($_SESSION['token'])) {
$client->setAccessToken($_SESSION['token']);
}
if ($client->getAccessToken()) {
try {
$channelsResponse = $youtube->channels->listChannels('contentDetails', array(
'mine' => 'true',
));
$htmlBody = '';
foreach ($channelsResponse['items'] as $channel) {
$uploadsListId = $channel['contentDetails']['relatedPlaylists']['uploads'];
$playlistItemsResponse = $youtube->playlistItems->listPlaylistItems('snippet', array(
'playlistId' => $uploadsListId,
'maxResults' => 50
));
$htmlBody .= "<h3>Videos in list $uploadsListId</h3><ul>";
foreach ($playlistItemsResponse['items'] as $playlistItem) {
$htmlBody .= sprintf('<li>%s (%s)</li>', $playlistItem['snippet']['title'],
$playlistItem['snippet']['resourceId']['videoId']);
}
$htmlBody .= '</ul>';
}
} catch (Google_ServiceException $e) {
$htmlBody .= sprintf('<p>A service error occurred: <code>%s</code></p>',
htmlspecialchars($e->getMessage()));
} catch (Google_Exception $e) {
$htmlBody .= sprintf('<p>An client error occurred: <code>%s</code></p>',
htmlspecialchars($e->getMessage()));
}
$_SESSION['token'] = $client->getAccessToken();
} else {
$state = mt_rand();
$client->setState($state);
$_SESSION['state'] = $state;
$authUrl = $client->createAuthUrl();
$htmlBody = <<<END
<h3>Authorization Required</h3>
<p>You need to authorize access before proceeding.<p>
END;
}
?>
<!doctype html>
<html>
<head>
<title>My Uploads</title>
</head>
<body>
<?=$htmlBody?>
</body>
</html>
I have implemented the google plus api on development server and it works fine. I used the same code on production server. But after requesting the permission it takes a long time to return to my site and login.
Can anyone please let me know what might be the cause. I have used oauth2.
Below is the code I am using
<?php
session_start();
require_once 'googleplus/src/Google_Client.php';
require_once 'googleplus/src/contrib/Google_Oauth2Service.php';
class Webpage_UserGPlusLogin extends Webpage
{
public function __construct()
{
$temp_redirect = $_SESSION['RETURN_URL_AFTERLOGIN'];
$this->title = 'User Account';
$client = new Google_Client();
$client->setApplicationName(WEBSITE_NAME);
$client->setClientId(GOOGLE_PLUS_CLIENT_ID); // Client Id
$client->setClientSecret(GOOGLE_PLUS_CLIENT_SECRET); // Client Secret
$client->setRedirectUri(GOOGLE_PLUS_REDIRECT_URI); // Redirect Uri set while creating API account
$client->setDeveloperKey(GOOGLE_PLUS_DEVELOPER_KEY); // Developer Key
$oauth2 = new Google_Oauth2Service($client);
if (isset($_GET['code'])) {
$client->authenticate($_GET['code']);
$_SESSION['token'] = $client->getAccessToken();
$redirect = GOOGLE_PLUS_REDIRECT_URI;
header('Location: ' . filter_var($redirect, FILTER_SANITIZE_URL)); // Redirects to same page
return;
}
if (isset($_SESSION['token'])) {
$client->setAccessToken($_SESSION['token']);
}
if (isset($_REQUEST['logout'])) {
unset($_SESSION['token']);
$client->revokeToken();
}
if(!isset($_SESSION['email_address_user_account'])) // Check if user is already logged in or not
{
if ($client->getAccessToken()) {
$user = $oauth2->userinfo->get(); // Google API call to get current user information
$email = filter_var($user['email'], FILTER_SANITIZE_EMAIL);
$img = filter_var($user['picture'], FILTER_VALIDATE_URL);
$googleuserid = $user['id'];
$given_name = $user['given_name'];
$family_name = $user['family_name'];
// The access token may have been updated lazily.
$_SESSION['token'] = $client->getAccessToken();
// If email address is present in DB return user data else insert user info in DB
$this->result = UserAccount::gplus_sign_up($email, $googleuserid, $given_name, $family_name);
// Create new user object.
$this->user_account = new UserAccount($this->result['id'],$this->result['email_address'],$this->result['password'],$this->result['confirmation_code'],$this->result['is_confirmed'], $this->result['first_name'], $this->result['last_name']);
$_SESSION['gplus_email_address'] = $email;
$_SESSION['gplus_first_name'] = $given_name;
$_SESSION['gplus_last_name'] = $family_name;
$_SESSION['gplus_id'] = $googleuserid;
$_SESSION['gplus_profile_pic'] = $img;
$_SESSION['email_address_user_account'] = $email;
} else {
$authUrl = $client->createAuthUrl();
}
}
if(isset($temp_redirect))
header("Location:".$temp_redirect);
else
header("Location:/");
}
}
Thanks in advance
Try this
use following code
$temp = json_decode($_SESSION['token']);
$request = "https://www.googleapis.com/oauth2/v1/userinfo?alt=json";
$curl = curl_init();
curl_setopt($curl,CURLOPT_URL,$request);
curl_setopt($curl,CURLOPT_RETURNTRANSFER,1);
curl_setopt($curl,CURLOPT_TIMEOUT,30);
curl_setopt($curl,CURLOPT_SSL_VERIFYPEER,false);
curl_setopt($curl, CURLINFO_HEADER_OUT, true);
curl_setopt($curl,CURLOPT_HTTPHEADER,array('Authorization: OAuth '.$temp->access_token));
$response = trim(curl_exec($curl));
$info = curl_getinfo($curl);
$request_header_info = curl_getinfo($curl, CURLINFO_HEADER_OUT);
//var_dump($info);
//var_dump($request_header_info);
curl_close($curl);
echo "<pre>";
print_r(json_decode($response));
instade of
$user = $oauth2->userinfo->get(); // Google API call to get current user information`enter code here`
Hope this will help you .. :)