I'm trying to register my app in SITServer using MobileFirst 8.0 by following this tutorial
1) Hitting this error:
mfpdev app register SITServer
Verifying server configuration... Error: Cannot connect to server
'SITServer' at 'http://xxx.xxx.xxx.xxx:9080'. Reason: Failed to set
runtime details.: Unexpected token < in JSON at position 0: HTTP 404 -
Not Found
$ mfpdev server info
2) Is it caused by the difference in server version? My Local server version is 8.0.0-2016101416 and SITServer version is 8.0.0.00-20160822-2140
I suspect this happened due to some of the changes you've made to the server.xml; you did not mention which changes you've done so I would advise to double check those (any real reason to change these?).
Either way, both HTTP and HTTPS are supported, yes.
Related
Recently I've been installing upwork application on my debian system.It has installed fine.But when I try to launch it from cli typing: upwork
a bunch of errors happen.
[1008/213534:ERROR:browser_main_loop.cc(173)] Running without the SUID sandbox! See https://code.google.com/p/chromium/wiki/LinuxSUIDSandboxDevelopment for more information on developing with the sandbox on.
[1008/213535:ERROR:renderer_main.cc(200)] Running without renderer sandbox
[1008/213542:ERROR:renderer_main.cc(200)] Running without renderer sandbox
[1008/213542:WARNING:channel.cc(549)] Failed to send message to ack remove remote endpoint (local ID 1, remote ID 1)
[1008/213542:WARNING:channel.cc(549)] Failed to send message to ack remove remote endpoint (local ID 2147483648, remote ID 2)
[1008/213542:ERROR:channel.cc(300)] RawChannel read error (connection broken)
[1008/213542:ERROR:renderer_main.cc(200)] Running without renderer sandbox
[1008/213543:WARNING:channel.cc(549)] Failed to send message to ack remove remote endpoint (local ID 1, remote ID 1)
[1008/213543:WARNING:nss_ssl_util.cc(370)] Unknown SSL error -12218 (SSL_ERROR_ENCRYPTION_FAILURE) mapped to net::ERR_SSL_PROTOCOL_ERROR
[1008/213600:WARNING:nss_ssl_util.cc(370)] Unknown SSL error -12218 (SSL_ERROR_ENCRYPTION_FAILURE) mapped to net::ERR_SSL_PROTOCOL_ERROR
[1008/213600:WARNING:nss_ssl_util.cc(370)] Unknown SSL error -12218 (SSL_ERROR_ENCRYPTION_FAILURE) mapped to net::ERR_SSL_PROTOCOL_ERROR
[1008/214550:WARNING:channel.cc(549)] Failed to send message to ack remove remote endpoint (local ID 1, remote ID 1)
[
How to overcome this errors?
After online searching the decision was found on upwork site forum
unknown ssl error
The problem was how to use the 2 versions of libnss3 packet simultaneously.Libnss3 goes as a security related packet so instead of downgrading it on the system you can simply download the old version of libnss3 compatible with upwork app and then dynamically add a path to this old version to the linker when you need to use upwork app, while the system will have the newest one.
after the fixpack in subject, i cannot manage to direct update my application.
It notify me that there is a new version available, but when i hit Update it keeps saying that the download failed (both on iOS and Android).
I attached my android to adb and i noticed those lines in the console:
Authentication error: Unable to respond to any of these challenges:
{wl-composite-challenge=WWW-Authenticate: WL-Composite-Challenge}
java.io.IOException: Error downloading update file The following
message has been received from the server instead of the expected
application update zip file: HTTP/1.1 401 Unauthorized
/-secure-{"challenges":{"wl_deviceNoProvisioningRealm":{"token":"1or0tj7gnoev1rn06s188j4u9h"},"wl_antiXSRFRealm":{"WL-Instance-Id":"np8c8o3c4dk1k7s79i2ikddfab"}}}/
at
com.worklight.androidgap.plugin.WebResourcesDownloaderPlugin$WebResourcesDownloader.downloadZipFile(WebResourcesDownloaderPlugin.java:364)
To complete the information I deployed the IBM_Worklight_Console with no security role in its web.xml and we have Worklight 6.1.0.1 installed on WAS Network Deployment 7.0.0.23 running AIX.
Before the fixpack, everything worked well.
Thank you
EDIT: here you can see my application-descriptor.xml and my server configuration:
I forgot about this stack, however I found the problem.
When I open my application, the WL Framework asks for new available update. In the same time, my application ask an adapter for some data, before the WL server can response about the Update. So if it arrives first the response of my adpater, then the Update response will contain a different requestID causing a 403 forbidden.
I don't know if I explained it clearly, however the temporary fix is to put updateSilently: true, not disturbing the direct update.
Worklight 6.0.0, targeting iPad.
I have a simple demonstration application, no authentication at present. I am demonstrating use of reverse proxy. So I am building my application using the Build for Remote Server workaround and can see in xcode the correct server specification. I have some adapter calls, but for a particular demo scenario I also want to make an explicit call to
WL.Client.connect( ... );
If I use an http connection I see a request like this:
http://192.168.0.19/MyApp/apps/services/api/Work01/ipad/init
and it works just fine. If instead I use an SSL connection, as expected I see this
https://192.168.0.19:443/Infrabel01/apps/services/api/Work01/ipad/init
And I get the following error.
> [ERROR ] FWLSE0059E: Login into realm 'NullLoginModule' failed. The
> environment 'ipad' supports multiple versions, therefore you must
> request it with a version parameter.. [project Infrabel01] The
> environment 'ipad' supports multiple versions, therefore you must
> request it with a version parameter. [ERROR ]
> FWLSE0117E: Error code: 4, error description: AUTHENTICATION_ERROR,
> error message: An Error occurred while performing authentication using loginModule
> NullLoginModule, User Identity Not available. [project Infrabel01]
> [project Infrabel01]
That "request it with a version parameter" is intriguing. Is there some extra parameter I need to pass? Or is the overall implication that connecting over SSL requires authentication?
I had the same problem.
I have solved it by using the real IP address of the server in the WL app instead of using localhost:
When the emulator is running your app, press the Menu button.
Select to change your server URL
Remove "localhost" and use the IP address.
Accept and try again.
This fixed my problem.
Please make sure your Worklight server or proxy server is enabled SSL with certificate which signed by a trust public CA like Verisign. Worklight not support private CA certificate.
I've encountered a problem during development.
When the adapter is tested from within Eclipse ("Invoke Worklight procedure"), it does its job perfectly.
On the contrary, when the adapter is called from the app, it doesn't work. I receive the following error:
Error 405 HTTP method POST is not supported by this URL
I've noticed a strange thing. When the adapter is called from the test procedure the URL seems correct (/apps/services/api/...) In the other case, Worklight puts a worklight prefix (/worklight/apps/services/api/...) when it makes the call. Hence the URL cannot be reached.
Here Worklight Studio - error http 405 when connecting to mobile URL provided by Console I found a partial solution but it does not work.
Additional info
WL version is 5.0.6.
Application server is Tomcat 7.
Based on my experiments I found the problem.
Each worklight project has an application-descriptor.xml. Within it there is a tag that indicates the WL server root URL.
Since I've taken the project from another source, I've simply noticed that it was configured as
<worklightServerRootURL>http://sampleDomain/worklight</worklightServerRootURL>
where sampleDomain is only a placeholder for the real one.
Now it is configured like
<worklightServerRootURL>http://${local.IPAddress}:8080</worklightServerRootURL>
to perform internal local tests.
Hope it helps.
I am building an application and I am using web services for getting data from a server. It was working fine when I was developing on my XP machine but had to switch to Windows 7. On the new machine I grabbed the latest version of the code using sourcesafe.
However, when I try to add a service reference in the solution or update an existing one I get the following error:
There was an error downloading 'http://localhost:52490/Service/CustomerService.asmx'.
The request failed with the error message:
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not create type 'Digital_Server.CustomerService'.
Source Error
Source File: /Service/CustomerService.asmxLine: 1
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
--.
Metadata contains a reference that cannot be resolved: 'http://localhost:52490/Service/CustomerService.asmx'.
An error occurred while receiving the HTTP response to http://localhost:52490/Service/CustomerService.asmx. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See server logs for more details.
The underlying connection was closed: An unexpected error occurred on a receive.
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
An existing connection was forcibly closed by the remote host
If the service is defined in the current solution, try building the solution and adding the service reference again.
Does it has anything to do with the IIS or is it any configuration file I have to change in the solution?
Any help is appreciated.
How do you deploy your app to the server? Via a zip file?
Perhaps it extracts the files without the path.