In VS 2015 Community, My form as a button.
Current Code is:
Private Sub CellStart_MouseHover(sender As Object, e As EventArgs) Handles CellStart.MouseHover
CellStart.BackgroundImage = My.Resources.graycell_hilight
End Sub
Private Sub CellStart_MouseLeave(sender As Object, e As EventArgs) Handles CellStart.MouseLeave
CellStart.BackgroundImage = My.Resources.graycell
End Sub
Private Sub CellStart_Click(sender As Object, e As EventArgs) Handles CellStart.Click
CellStart.BackgroundImage = My.Resources.graycell_select
End Sub
What I want is that if the button is in the post click state (Current BackgroundImage is graycell_select), for the MouseLeave and Mouse Hover to no longer be enabled. If the button becomes deselected I need them to be enabled again. I have tried if statements, assigning an integer +1 on click but nothing seems to override the leave and hover events. I am dreadfully new so any help or points to something similar is appreciated. Thanks in advance. This is in a winform.
Click your button and Find the GotFocus and LostFocus in the Event tab.
Click GotFocus and put this code inside of it.
CellStart.BackgroundImage = My.Resources.graycell_hilight
Click LostFocus and put this code inside of it.
CellStart.BackgroundImage = My.Resources.graycell
leave the click on what it has.
Dont forget to remove not just copy remove the codes in the MouseHover and MouseLeave
Related
I've just starting using ListView control in VS2019.
I'm sure there's a simple solution, but I can't figure out how to set the focus on the control like I can with most other controls.
I want the ListView to be focused when the form loads, and then I want to programmatically focus an item in the ListView.
I know how to focus a particular item using ListView1.FocusedItem.Index, but I can't focus the actual control.
I have tried both ListView1.Select() and ListView1.Focus() but these seem to do nothing.
What am I missing!?
Thanks
EDIT
As pointed out below, the control is actually focused using ListView1.Select() it's just not focused in the same way I'd expect, for example, a ListBox to be focused - ie, with a particular item in the list highlighted.
How would you best focus the ListView and highlight a particular item?
I have tried this in a command button on the form, but it doesn't do anything. Though it works correctly AFTER I click an Item in the ListView.
ListView1.Select()
If (ListView1.SelectedItems.Count > 0) Then
ListView1.Items(4).Selected = True
End If
listview1.focus()
For I as Integer = 0 to ListView1.Items.Count - 1
If ListView1.Items(i).Text = "youritemtexthere" then
ListView1.Items(i).Selected = true
End If
End For
or if you have the index but not a known text just do:
listview1.focus()
ListView1.Items(index).Selected = true
ListView1.Select works, you probably just don't see that the ListView has focus. You can verify this by checking the GotFocus and LostFocus events on the ListView:
Private Sub ListView1_GotFocus(sender As Object, e As EventArgs) Handles ListView1.GotFocus
Me.Text = "Got Focus"
End Sub
Private Sub ListView1_LostFocus(sender As Object, e As EventArgs) Handles ListView1.LostFocus
Me.Text = "Lost Focus"
End Sub
This simply updates your Form's title to "Got Focus" or "Lost Focus". You can force the focus in your Form Load event:
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
ListView1.Items.Add("a")
ListView1.Items.Add("b")
ListView1.Items.Add("c")
ListView1.Select()
End Sub
I have 15 buttons created through design.
I want them to have a background picture whenever I click on any of them, for example:
If I click on button11 then its background will be "Hello.jpg"
If click button12 then its background will be become "Hello.jpg"
Is there a method to write a code instead of writing code for individual button?
The code should detect which button I clicked and then change its background.
Private Sub e_11_Click(sender As Object, e As EventArgs) Handles e_11.Click
e_11.Image = Image.FromFile("E:\battleship\Explode.gif")
End Sub
Is there a way that handles every button click?
Yes, you can bind the same method to multiple controls:
Private Sub MyButtons_Click(sender As Object, e As EventArgs) _
Handles e_1.Click, e_2.Click, e_3.Click, ...
Dim myButton = DirectCast(sender, Button)
myButton.Image = Image.FromFile("E:\battleship\Explode.gif")
End Sub
I have a Visual Studio, Visual Basic form that includes an OK button and a Cancel button.
What I want to do is have the OK button save the options that the user chooses and of course the Cancel button discarding them and returning them to their previous values.
But what I'm noticing is that as I'm debugging the form, the values are being saved regardless of whichever button I'm choosing. On the form's properties, I have declared that indeed the CancelBtn is the CancelBtn and that the OK button is the OK button, but the values are still being saved regardless.
Is there a better way to do what I would like this form to do?
EDIT:
Here's the code so far for the two buttons, both are being set to close the window. AcceptOption should save the values and CancelOption should just close the form. I'm sorry if this isn't done well but the FAQ's that I found only mention changing the properties of each button and nothing about the code.:
Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles AcceptOptionBtn.Click
' Save the Options
Me.Close()
' Close the form
End Sub
Private Sub Button2_Click(sender As System.Object, e As System.EventArgs) Handles CancelOptionBtn.Click
' Close the form
Me.Close()
End Sub
Don't change "the values" until the user clicks the Save button.
The form should be preloaded with a copy of the values you would like to update.
The Cancel button should just close the form.
The Save button should cause "the values", not the forms copy, to be updated.
EDIT:-
In regard to this question, there is nothing wrong with the code you have posted. Are the right handlers being called for the right button clicks? Are the form's AcceptButton and CancelButton properties set to the right buttons?
What data are your editing controls bound to, if at all?
There's nothing magical about OK and Cancel buttons. They're just... buttons. If you save your data every time a change is made, the Cancel button won't magically "unsave" them. Though if you save changes in the OK button's Click event handler, then clicking the Cancel button obviously won't save your changes. To help you further we'd need to know how you save your data.
Edit:
From looking at your code, I think you're passing data directly to your form, without performing a copy of your objects. Therefore if you modify this data, it will also be changed in the parent form. By working with a copy of your data in this form, any changes which aren't saved will be correctly discarded.
Your event handler for the cancel button should look like this:
Private Sub btnCancel_Click(sender As System.Object, e As System.EventArgs) Handles btnCancel.Click
Me.Close()
End Sub
Your event handler for the OK button should look like this:
Private Sub btnOK_Click(sender As System.Object, e As System.EventArgs) Handles btnOK.Click
SaveSettings 'call a routine to save the settings the user has entered
Me.Close()
End Sub
It is as simple as that!
If you open your form like
myForm.showdialog()
you don't have to define the handler for the close button click event, it is automatically handled; just set the 'DialogResult' property for the button
btnCancel.DialogResult = DialogResult.Cancel
Also if you want to close the form when ESC is pressed then set the 'CancelButton' property for the form:
myForm.CancelButton = btnCancel
On the other hand if you open the form like
myForm.Show()
you do need to specify the action(s) to take on the close button click event as indicated here, ie:
Private Sub BtnCancelClick(ByVal sender As System.Object, ByVal e As EventArgs) Handles btnCancel.Click
Close()
End Sub
I was having the same issues. As soon as I use My.Settings.Blabla = Blabla.value, it gets saved even if I haven't used My.Settings.Save() which makes My.Settings.Save() completely pointless as far as I can tell.
I ended up taking up Jordell's advice: Don't change "the values" until the user clicks the Save button but it wasn't too clear for me how to go about it.
I ended up using temporary variables in all my settings subs instead of the user My.Settings.UserConfigs. Only when I was in the OK sub did I call
My.Settings.UserConfigSetting = temporary_UserCofigValue
Here is an example from the code I was working on:
Private Sub btnOptionsThemeLB_Back_Update_Click(sender As System.Object, e As System.EventArgs) Handles btnOptionsThemeLB_Back_Update.Click
If (tempOptionsThemeLB_Back = Nothing) Then
tempOptionsThemeLB_Back = Me.btnOptionsThemeLB_Back.BackColor
End If
tempOptionsThemeLB_Back = RGBToColor(txtbOptionsThemeLB_Back_Red.Text, txtbOptionsThemeLB_Back_Green.Text, txtbOptionsThemeLB_Back_Blue.Text, tempOptionsThemeLB_Back)
Me.btnOptionsThemeLB_Back.BackColor = tempOptionsThemeLB_Back
End Sub
And only withing the Ok sub did I call My.Settings.
'Theme Section
My.Settings.colorBtnBack = tempOptionsThemeLB_Back
I'm making a desktop application in vb.net. When I click the back button (placed by me) on any form it hides current form and shows previous form but when i go again to the form from which i had hit back button then the focus cue still remains on the back button but I want the focus to be on the first textbox on that form or any specific button on which I want.....How can i achieve this...
I have already used some code to shift focus from one textbox to another when i press enter key...but it doesn't work in the above mentioned case....I'm using vb.net in visual studio 2005...
This is the code i'm using for shifting focus among textboxes
Private Sub party_code_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles party_code.KeyDown
If e.KeyData = Keys.Return Then
party_name.Focus()
End If
End Sub
Can anyone help me on this????
You need to add a handler for either the form's Activated event:
Private Sub Form1_Activated(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Activated
party_name.Focus()
End Sub
I can't seem to get input focus on a textbox when a tab page first comes up (I'm using Windows Forms, VB.NET 3.5).
I have a textbox on a panel on a tab page, and I want the focus to be on the textbox when the tab page comes up. I want the user to be able to start typing immediately in the focused textbox without having to click on the textbox. I have tab stops set in the order I want and the textbox is the first tab stop. The tab stops work except that when the tab page comes up the focus is not on the textbox, i.e. the one that's first in the tab order.
In the Enter event handler of the tab page I call the Focus method of the text box, but it returns False and does nothing, no error messages. I know I can access the text box because
at the same point in the code I can set the text of the text box.
If it matters, the layout of the tab page is a little complicated:
frmFoo/TabControl1/TabPageX/Panel1/Panel2/TextBox1
I want to set the focus on TextBox1.
What's the best way to get the focus on the desired textbox?
If setting focus is the best way, why is the textbox.Focus() method failing?
I would assume you are attempting to set focus in the form load event handler? If so, you need to do a Me.Show() to actually create the onscreen controls before focus can be set. Something along the lines of:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs)
Me.Show()
Application.DoEvents()
TextBox1.Focus()
End Sub
If you don't do the Me.Show(), the form is NOT displayed until the load event is complete.
For the tab control, handle the _SelectedIndexChanged event:
Private Sub TabControl1_SelectedIndexChanged(sender As Object, e As System.EventArgs) _
Handles TabControl1.SelectedIndexChanged
If TabControl1.SelectedTab.Name = "TabPage1" Then
TextBox2.Focus()
End If
If TabControl1.SelectedTab.Name = "TabPage2" Then
TextBox4.Focus()
End If
You will still want to set the initial focus in the load event as shown above if the first field selected is to be the textbox on the tab control.
Try either:
Me.ActiveControl = TextBox1
or
TextBox1.Select()
Do the control.Focus() in the OnShown event. You don't need any of the DoEvents logic which didn't work for me anyway.
You Should Use Selected Event of TabControl
Private Sub TabControl1_Selected(ByVal sender As Object, ByVal e As System.Windows.Forms.TabControlEventArgs) Handles TabControl1.Selected
If e.TabPage.Name = "TabPage1" Then
TextBox1.Select()
End If
End Sub
As I have Checked in Both TabControl.Selected and TabPage.Enter Event can set Select TextBox. I think there is some other elements stealing focus. please varify
Any of the solutions I found online don't solve the problem when the control is on a tab page.
However, this works:
(1) set the TabIndex of the control to 0.
(2) In your code that handles the tabpage event, do the following:
SendKeys.Send("{TAB}")
If SendKeys doesn't seem to be a valid statment, make sure you have the following import at the top of your code file:
Imports System.Windows.Forms
I found that the TabControl gets the focus when the Selected event completes. To make this work I used the Paint event of the TabPage to set the focus of the desired object.
Private Sub TabChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Tab1.Paint, Tab2.Paint, Tab3.Paint
Select Case sender.Name
Case "Tab1"
Textbox1.Focus()
Case "Tab2"
T3extbox2.Focus()
Case "Tab3"
Textbox3.Focus()
End Select
End Sub
Try the Activated event of the form like this:
Private Sub Form2_Activated(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Activated
'SendKeys.Send("{TAB}") this line works too
TextBox1.Focus()
End Sub
That is guaranteed to work.
I once had the same problem but i solved it using the Me.activate() function.