I have a query according to the :
SELECT
tblDefinition.TopsisType, tblTemplate.tType, tblEvaluationFormCategory.Title AS EvaluationCategory,
CASE tType WHEN 1 THEN N'2'
ELSE N'1' END ProcessType,
tblDefinition.Description, tblDefinition.TemplateID, 1 Destinition
FROM tblTemplate INNER JOIN
tblEvaluationFormCategory ON tblTemplate.CategoryID = tblEvaluationFormCategory.ID INNER JOIN
tblEFQMAlternative INNER JOIN
tblDefinition ON ([tblEFQMAlternative].[TopsisID] = [tblDefinition].[TopsisID] AND [tblEFQMAlternative].[CustomerID] = [tblDefinition].[CustomerID]) INNER JOIN
tblGroupMembers ON ([tblDefinition].[TopsisID] = [tblGroupMembers].[TopsisID]
AND tblDefinition.CustomerID =
tblGroupMembers.CustomerID) ON tblTemplate.TemplateID = tblDefinition.TemplateID
INNER JOIN
tblTerm ON tblDefinition.TermGrant = tblTerm.Title
WHERE (tblTerm.ID = 20) AND (tblGroupMembers.UserID = 558)
GROUP BY tblDefinition.TopsisType, tblTemplate.tType, tblEvaluationFormCategory.Title,
tblDefinition.Description, tblDefinition.TemplateID
when i convert to linq, then error to :
Field [([tblDefinition].[TopsisID] = [tblGroupMembers]].[[TopsisID] AND tblDefinition.CustomerID = tblGroupMembers.CustomerID) ON tblTemplate.TemplateID] not found in the current Data Context.
What should I do?
Related
I am trying to fetch the results from the DB using the Entity Framework using the below SQL query:
SELECT
Header_Id,
Header_Number, Details_Id,
Details_Header_Date,
(SELECT TOP 1 c.[Comment_Description] FROM [Comment] c
WHERE c.[Comment_CarrierId] = i.[Header_CarrierId] AND c.[Comment_ParentEntityId] = i.[Header_Id]
ORDER BY c.Comment_AddedOn DESC) AS 'HeaderComments',
CONCAT(ht.[HeaderTracker_Reason], ' ', ht.[HeaderTracker_Notes]) AS 'RejectedComments',
at.[InternalComments] AS 'InternalComments',
CASE i.[Header_Status]
WHEN 'Pending' THEN ar.[HeaderTracker_ApprovedLvl] END AS 'ApprovedLevel',
CASE i.[Header_Status]
WHEN 'Pending' THEN ar.[HeaderTracker_DueBy] END AS 'ApprovedDueDate'
FROM [Header] i
LEFT OUTER JOIN [Details] ii
ON i.[Header_Id] = ii.[Details_HeaderId]
INNER JOIN [Carrier] t
ON t.[Carrier_Id] = i.[Header_CarrierId]
LEFT OUTER JOIN [HeaderTracker] ht
ON ht.[HeaderTracker_HeaderId] = i.[Header_Id] AND ht.[HeaderTracker_Type] = 'Rejected'
LEFT OUTER JOIN [AdjustmentTracker] at
ON at.[DetailsId] = ii.[Details_Id]
LEFT OUTER JOIN [HeaderTracker] ar
ON ar.[HeaderTracker_HeaderId] = i.[Header_Id]
AND i.[Header_Status] IN ('Paid', 'Pending', 'Approved', 'PaidWithAdj')
AND ar.[HeaderTracker_IsPending] = 1
The result output should be using LINQ query / LAMBDA expression
The following code is what I tried: (not sure how TOP 1 and CASE would come here + if & is also valid here)
var statuses = new string[] { "Paid", "Pending", "Approved", "PaidWithAdj" };
var hdrdet =
(
from hdr in dbContext.Headers
join det in dbContext.Details on hdr.Header_Id equals det.Header_Id into hdrdet
from h in hdrdet.DefaultIfEmpty()
join carr in dbContext.Carriers on hdr.Carrier_Id equals carr.Header_Carrier_Id into carrs
from c in carrs.DefaultIfEmpty()
join hdrtk in dbContext.HeaderTracker on hdr.Header_Id equals hdrtk.HeaderTracker_HeaderId && hdrtk.HeaderTracker_Type equals "Rejected" into hdrtks
from k in hdrtks.DefaultIfEmpty()
join adjt in dbContext.AdjustmentTracker on adjt.DetailsId equals det.Details_Id into adjts
from a in adjts.DefaultIfEmpty()
join pnd in dbContext.HeaderTracker on pnd.HeaderTracker_HeaderId equals hdr.Header_Id && hdr.Header_Status contains(statuses) && pnd.[HeaderTracker_IsPending] equals 1 into pnds
from p in pnds.DefaultIfEmpty()
select new
{
hdrid = Header_Id,
hdrnumber = Header_Number, Details_Id,
det_date = Details_Header_Date,
reason = HeaderTracker_Reason + ' ' + HeaderTracker_Notes,
intcomments = InternalComments
}
)
Any possibility methods to avoiding "Union all" when different joining > conditions varies on each section
SELECT RS1.*, EXL.*
FROM "EXL" "EXL"
INNER JOIN "RS1" "RS1"
ON "RS1"."HEADER_KEY" = "EXL"."HEADER_KEY"
WHERE "RS1"."PIPE_KEY" = '1109' AND
"RS1"."COLK" IS NULL AND
"RS1".CT1 = 0 AND "RS1".CT2 > 0
UNION ALL
SELECT RS1.*, EXL.*
FROM "EXL" "EXL"
INNER JOIN "RS1" "RS1"
ON "RS1"."HEADER_KEY" = "EXL"."HEADER_KEY"
INNER JOIN "YFS"."STATUS_MAP" "SOS"
ON "SOS"."STATUS" = "RS1"."STATUS"
INNER JOIN "RS1" "RS2"
ON "RS2"."LINE_KEY" = "RS1"."CHAINLINE_KEY" AND
"RS2"."PIPEKEY" = "SOS"."TYPE_KEY" AND
"RS2"."STATUS" = "SOS"."EXTN_STATUS" AND
"RS2"."PIPE_KEY" = '4093'
WHERE "RS1"."PIPE_KEY" = '1109' AND
"RS1"."COLK" IS NULL AND
"RS1".CT1 = 0 AND "RS1".CT2 > 0
Since the two SELECTs have exactly the same WHERE-condition, I assume that you want to return rows from EXL, even when rows from YFS.STATUS_MAP are missing (otherwise please explain what your intention is). You can do this with LEFT JOIN
SELECT RS1.*, EXL.*
FROM
"EXL"
INNER JOIN "RS1"
ON "RS1"."HEADER_KEY" = "EXL"."HEADER_KEY"
LEFT JOIN "YFS"."STATUS_MAP" "SOS"
ON "SOS"."STATUS" = "RS1"."STATUS"
LEFT JOIN "RS1" "RS2"
ON "RS2"."LINE_KEY" = "RS1"."CHAIN_LINE_KEY" AND
"RS2"."PIPEKEY" = "SOS"."TYPE_KEY" AND
"RS2"."STATUS" = "SOS"."EXTN_STATUS" AND
"RS2"."PIPELINE_KEY" = '4093'
WHERE "RS1"."PIPELINE_KEY" = '1109' AND
"RS1"."COLK" IS NULL AND
"RS1".CT1 = 0 AND "RS1".CT2 > 0
I have this query in sql
SELECT
SI_Articulo = COALESCE(t.SI_Articulo, c.SI_Num_Articulo),
SI_Ubicacion = COALESCE(t.SI_Ubicacion, c.SI_Ubicacion),
SI_OV = COALESCE(c.SI_OV,''),
SI_Ubicacion_Fisica = COALESCE(c.SI_Ubicacion_Fisica,''),
SI_Existencia = COALESCE(t.SI_Existencia, 0),
SI_Cantidad = COALESCE(c.SI_Cantidad, 0),
SI_Cantidad2 = (SELECT COALESCE(c2.SI_Cantidad,0)
FROM SI_Conteo c2
WHERE c2.SI_Num_Conteo = 2 /*AND c2.SI_Num_Articulo = 200002*/
AND t.SI_Ubicacion = c2.SI_Ubicacion),
SI_Dif = COALESCE(c.SI_Cantidad, 0) - COALESCE(t.SI_Existencia, 0),
SI_Dif_Dinero = (COALESCE(c.SI_Cantidad,0) - COALESCE(t.SI_Existencia,0)) * COALESCE(m.SI_Costo_Promedio,0)
FROM SI_Inventario_Teorico_QAD t
LEFT JOIN SI_Conteo c
ON (t.SI_Articulo = c.SI_Num_Articulo
AND c.SI_Num_Conteo = 1
AND t.SI_Ubicacion = c.SI_Ubicacion)
INNER JOIN SI_Maestro_Ref_QAD m
ON (t.SI_Articulo = m.SI_Num_Articulo
OR c.SI_Num_Articulo = m.SI_Num_Articulo)
WHERE c.SI_Num_Articulo = 200002
OR t.SI_Articulo = 200002
Which brings me the next result
img1
My problem is that in the SI_Conteo table I have the same reference added, but it does not exist in the SI_SI_Inventario_Teorico_QAD table so it does not show it to me.
This is the one that does not bring me
img2
According to your problem that the reference in the table "SI_Conteo" and not in the table "SI_Inventario_Teorico_QAD",
you may need to use right join like:
SI_Conteo right join SI_Inventario_Teorico_QAD
or use left like:
SI_Inventario_Teorico_QAD left join SI_Conteo
I wrote a query that does an inner join of two subqueries. The first subquery has an alias of "SRC" and the other has an alias of "DEST". What I want to do is update some fields in the table NomineeActionLegislatorVoteDetail (part of DEST subquery) with values from the table Nominee_Committee_Vote (part of SRC subquery). It souds easy but I just cannot figure out how to do it. Does anyone have any suggestions? Any help would be appreciated.
Here is the query I wrote:
select *
from (
select ncv.*,
na.NomineeActionId,
l.LegislatorId
from ongoing..Nominee_Committee_Vote ncv
inner join azleg..NomineeAction na on
ncv.session_id = na.x_session_id and
ncv.committee_id = na.x_committee_id and
ncv.agency_id = na.x_agency_id and
ncv.position_id = na.x_position_id and
ncv.nominee_id = na.x_nominee_id and
ncv.received_date = na.x_received_date
inner join status..session s on
ncv.session_id = s.session_id
inner join azleg..Legislator l on
ncv.member_id = l.x_member_id and
s.legislature = l.LegislatureId
) SRC
inner join (
select votedetail.*
from azleg..NomineeActionLegislatorVoteDetail votedetail
inner join azleg..NomineeAction nom_action on
votedetail.NomineeActionId = nom_action.NomineeActionId
) DEST on
SRC.agency_id = DEST.x_agency_id and
SRC.position_id = DEST.x_position_id and
SRC.nominee_id = DEST.x_nominee_id and
SRC.received_date = DEST.x_received_date and
SRC.session_id = DEST.x_session_id and
SRC.committee_id = DEST.x_committee_id and
SRC.member_id = DEST.x_member_id
where SRC.NomineeActionId <> DEST.NomineeActionId
OR SRC.LegislatorId <> DEST.LegislatorId
OR SRC.Vote <> DEST.Vote
Can you insert the update in front of the sub queries
UPDATE NomineeActionLegislatorVoteDetail
SET NomineeActionLegislatorVoteDetail.COLUMNNAME = src.VALUE
--SubQueriesBelow
from
(select ncv.*, na.NomineeActionId, l.LegislatorId from ongoing..Nominee_Committee_Vote ncv
inner join azleg..NomineeAction na on
ncv.session_id = na.x_session_id and
ncv.committee_id = na.x_committee_id and
ncv.agency_id = na.x_agency_id and
ncv.position_id = na.x_position_id and
ncv.nominee_id = na.x_nominee_id and
ncv.received_date = na.x_received_date
inner join status..session s on
ncv.session_id = s.session_id
inner join azleg..Legislator l on
ncv.member_id = l.x_member_id and
s.legislature = l.LegislatureId) SRC
inner join
(select votedetail.* from azleg..NomineeActionLegislatorVoteDetail votedetail
inner join azleg..NomineeAction nom_action on
votedetail.NomineeActionId = nom_action.NomineeActionId) DEST on
SRC.agency_id = DEST.x_agency_id and
SRC.position_id = DEST.x_position_id and
SRC.nominee_id = DEST.x_nominee_id and
SRC.received_date = DEST.x_received_date and
SRC.session_id = DEST.x_session_id and
SRC.committee_id = DEST.x_committee_id and
SRC.member_id = DEST.x_member_id
where SRC.NomineeActionId <> DEST.NomineeActionId
OR SRC.LegislatorId <> DEST.LegislatorId
OR SRC.Vote <> DEST.Vote
It looks like the update is on a table in the sub query so it could be re factored to have one subquery
I've adjusted the lay-out of your query a bit to disclose better where subqueries start and end. In your DEST subquery, you join NomineeAction but you don't select any columns from it, so it only filters rows from NomineeActionLegislatorVoteDetail for which no NomineeAction exists. So really you wanna be updating and joining on columns from NomineeActionLegislatorVoteDetail exclusively. Based on that, I would write the update query like so:
update votedetail set
votedetail.SomeColumn = SomeValue,
votedetail.SomeOtherColumn = SomeOtherValue
from azleg..NomineeActionLegislatorVoteDetail votedetail
join azleg..NomineeAction nom_action on
votedetail.NomineeActionId = nom_action.NomineeActionId
join (
select ncv.*,
na.NomineeActionId,
l.LegislatorId
from ongoing..Nominee_Committee_Vote ncv
inner join azleg..NomineeAction na on
ncv.session_id = na.x_session_id and
ncv.committee_id = na.x_committee_id and
ncv.agency_id = na.x_agency_id and
ncv.position_id = na.x_position_id and
ncv.nominee_id = na.x_nominee_id and
ncv.received_date = na.x_received_date
inner join status..session s on
ncv.session_id = s.session_id
inner join azleg..Legislator l on
ncv.member_id = l.x_member_id and
s.legislature = l.LegislatureId
) SRC on
SRC.agency_id = votedetail.x_agency_id and
SRC.position_id = votedetail.x_position_id and
SRC.nominee_id = votedetail.x_nominee_id and
SRC.received_date = votedetail.x_received_date and
SRC.session_id = votedetail.x_session_id and
SRC.committee_id = votedetail.x_committee_id and
SRC.member_id = votedetail.x_member_id
where SRC.NomineeActionId <> votedetail.NomineeActionId
OR SRC.LegislatorId <> votedetail.LegislatorId
OR SRC.Vote <> votedetail.Vote
Trying to update the fact table with late coming dimension data. See Code below
UPDATE FactVehicleStock
SET
FactVehicleStock.[TOL_BidDateTime] = B.Bid_Date_and_Time,
FactVehicleStock.[TOL_AuctionDate] = B.Date_opened_for_tender,
FactVehicleStock.[TOL_OriginalLoadDate] = B.Original_Load_date,
FactVehicleStock.[TOL_ServiceHistory] = B.Service_History,
FactVehicleStock.[TOL_ReservedPrice] = B.Reserve_price,
FactVehicleStock.[TOL_BidPrice] = B.Bid_Price,
FactVehicleStock.[TOL_OriginalReservedPrice] = B.Original_Reserve_Price,
FactVehicleStock.[TOL_NoOfTimesReloaded] = B.Number_of_times_reloaded
FROM BMR_DWH.dbo.FactVehicleStock as A
INNER JOIN BMR_STAGE.dbo.STG_Traders_Online as B
ON A.StockbookNumber = B.Stock_Number
INNER JOIN BMR_DWH.[dbo].[DimDealership] as C
ON A.DEALERSHIP_KEY IN (SELECT Distinct [DEALERSHIP_KEY]
FROM BMR_DWH.[dbo].[DimDealership]
INNER JOIN [BMR_STAGE].[dbo].[STG_Traders_Online] E
ON LTRIM(RTRIM(C.MOLNUMBER)) = LTRIM(RTRIM(E.MOL_Number))
)
Try to use the right UPDATE SELECT Syntaxe.
If you look at the code I did, I had to change a bit your query to do the joins. See if it fits to you.
UPDATE BMR_DWH.dbo.FactVehicleStock as a
INNER JOIN BMR_STAGE.dbo.STG_Traders_Online as B
ON A.StockbookNumber = B.Stock_Number
INNER JOIN
(SELECT Distinct [DEALERSHIP_KEY]
FROM BMR_DWH.[dbo].[DimDealership] as C
INNER JOIN [BMR_STAGE].[dbo].[STG_Traders_Online] E
ON LTRIM(RTRIM(C.MOLNUMBER)) = LTRIM(RTRIM(E.MOL_Number)) ) D
ON A.DEALERSHIP_KEY = D.DEALERSHIP_KEY
SET
FactVehicleStock.[TOL_BidDateTime] = B.Bid_Date_and_Time,
FactVehicleStock.[TOL_AuctionDate] = B.Date_opened_for_tender,
FactVehicleStock.[TOL_OriginalLoadDate] = B.Original_Load_date,
FactVehicleStock.[TOL_ServiceHistory] = B.Service_History,
FactVehicleStock.[TOL_ReservedPrice] = B.Reserve_price,
FactVehicleStock.[TOL_BidPrice] = B.Bid_Price,
FactVehicleStock.[TOL_OriginalReservedPrice] = B.Original_Reserve_Price,
FactVehicleStock.[TOL_NoOfTimesReloaded] = B.Number_of_times_reloaded