How to copy the ansible control machine host key to the target server known_hosts? The problem is, ansible expect this setup have been already made, to connect to those target servers without prompt.
Should I use tasks with password authentication and secret variables to setup the keys, or configure host keys manually before provisioning?
You can either set ansible_ssh_user and ansible_ssh_pass variables, or pass them from command line when you run the playbook:
--user and --ask-pass.
You can put variables to var file encoded with Ansible Vault to keep them secret(but don't forget to include this file for you target hosts)
Please check this answer for more details: https://serverfault.com/questions/628989/how-set-to-ansible-a-default-user-pass-pair-to-ssh-connection
You can specify the variable for SSH key called ansible_ssh_private_key_file later in the task(I suppose you should use set_fact). I'm not completely sure but if you play around perhaps it would work.
P.S. in other hand, if you already specify the username and password, there is no difference what to use
Related
I am using scp to copy a file from one server to another. Both of the servers need a password to be passed with sshpass so I need to use sshpass twice in the same command. Note that I am using the -3 flag because server foo cannot directly communicate with server boo.
I tried
sshpass -p 'foo' scp -3 foo#foo.com:/home/foo/foo.txt sshpass -p 'boo' boo#boo.com:/home/boo/
but it didn't work, no error message, just didn't copy the file. Is there a way to accomplish this?
Note: Please don't suggest answers using key pair, I want to pass in the password rather than using keys (or prompting the user to type the password), I know it is visible to the whole system and that it is not secure, I still want to do it.
This is not possible.
According to scp manual:
-3
Copies between two remote hosts are transferred through the local host. Without this option the data is copied directly between the two remote hosts. Note that this option disables the progress meter and selects batch mode for the second host, since scp cannot ask for passwords or passphrases for both hosts.
And according to ssh_config manual:
BatchMode
If set to yes, user interaction such as password prompts and host key confirmation requests will be disabled. This option is useful in scripts and other batch jobs where no user is present to interact with ssh(1). The argument must be yes or no (the default).
I have installed ansible in on of my GCE Debian VM Instance(1). Now I want to connect to another GCE Debian VM instance(2).
I have generated the public key on Instance 1 and copied the .pub key manually to the the authorized key of instance 2.
But, when I try to do the ssh from 1 to 2 it gives permission denied.
Is there any other way round? I am a little new to this, trying to learn.
is there any step by step guide available? and also what is the exact ip address to do ssh on? will it be the internal IP or the External IP taken by GCE when the Instance is started.
I'm an Ansible user too and I manage a set of compute engine servers. My scenario is pretty close to yours so hopefully this will work for you as well. To get this to work smoothly, you just need to realise that ssh public keys are metadata and can be used to tell GCE to create user accounts on instance creation.
SSH public keys are project-wide metadata
To get what you want the ssh public key should be added to the Metadata section under Compute Engine. My keys look like this:
ssh-rsa AAAAB3<long key sequence shortened>Uxh bob
Every time I get GCE to create an instance, it creates /home/bob and puts the key into the .ssh/authorized_keys section with all of the correct permissions set. This means I can ssh into that server if I have the private key. In my scenario I keep the Private Key only in two places, LastPass and my .ssh directory on my work computer. While I don't recommend it, you could also copy that private key to the .ssh directory on each server that you want to ssh from but I really recommend getting to grips with ssh-agent
Getting it to work with Ansible
The core of this is to tell Ansible not to validate host checking and to connect as the user specified in the key (bob in this example). To do that you need to set some ssh options when calling ansible
ansible-playbook -ssh-common-args='-o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no' -u bob
Now Ansible will connect to the servers mentioned in your playbook and try to use the local private key to negotiate the ssh connection which should work as GCE will have set things up for you when the VM is created. Also, since hostname checking is off, you can rebuild the VM as often as you like.
Saying it again
I really recommend that you run ansible from a small number of secure computers and not put your private key onto cloud servers. If you really need to ssh between servers, look into how ssh-agent passes identity around. A good place to start is this article.
Where did you say the metadata was?
I kind of glossed over that bit but here's an image to get you started.
From there you just follow the options for adding a public key. Don't forget that this works because the third part of the key is the username that you want GCE and Ansible to use when running plays.
It's quite simple if you have two instances in google cloud platform, automatically you have the guest environment installed (gcloud command line), with it you can ssh through all you ssh inside your project:
Just run the following command line for inside your instance A to reach the Instance B
[user#Instance(1)]$ gcloud compute ssh Instance(2) --zone [zone]
That it, if it's not working let me know, and verify if your firewall rule let internal traffic.
I have an ansible configuration which I know works on my local machines. However, I'm trying to now set it up on my company's machines which use a wrapper command similar to ssh (let's call it 'myssh')
for example, to access these machines, instead of writing
ssh myuser#123.123.123.123
you write
myssh myuser#123.123.123.123
which ends up calling ssh, among other things.
My question is, is there a way to swap which command ansible uses for accessing machines?
You can create a Connection Type Plugin to archive this. Looking at the ssh plugin, it appears like it might be as easy as replacing the ssh_cmd in line 333. Also specify myssh in line 69.
See here where to place the modified file. Additionally to that information, you can specify a custom location and let Ansible know about it in connection_plugins setting in ansible.cfg.
Finally again in your ansible.cfg set the transport setting to your new plugin:
transport = myssh
PS: I have never done anything like that before. This is only info from the docs.
Jenkins keeps using the default "jenkins" user when executing builds. My build requires a number of SSH calls. However these SSH calls fails with Host verification exceptions because i haven't been able connect place the public key for this user on the target server.
I don't know where the default "jenkins" user is configured and therefore cant generate the required public key to place on the target server.
Any suggestions for either;
A way to force Jenkins to use a user i define
A way to enable SSH for the default Jenkins user
Fetch the password for the default 'jenkins' user
Ideally I would like to be able do both both any help greatly appreciated.
Solution: I was able access the default Jenkins user with an SSH request from the target server. Once i was logged in as the jenkins user i was able generate the public/private RSA keys which then allowed for password free access between servers
Because when having numerous slave machine it could be hard to anticipate on which of them build will be executed, rather then explicitly calling ssh I highly suggest using existing Jenkins plug-ins for SSH executing a remote commands:
Publish Over SSH - execute SSH commands or transfer files over SCP/SFTP.
SSH - execute SSH commands.
The default 'jenkins' user is the system user running your jenkins instance (master or slave). Depending on your installation this user can have been generated either by the install scripts (deb/rpm/pkg etc), or manually by your administrator. It may or may not be called 'jenkins'.
To find out under what user your jenkins instance is running, open the http://$JENKINS_SERVER/systemInfo, available from your Manage Jenkins menu.
There you will find your user.home and user.name. E.g. in my case on a Mac OS X master:
user.home /Users/Shared/Jenkins/Home/
user.name jenkins
Once you have that information you will need to log onto that jenkins server as the user running jenkins and ssh into those remote servers to accept the ssh fingerprints.
An alternative (that I've never tried) would be to use a custom jenkins job to accept those fingerprints by for example running the following command in a SSH build task:
ssh -o "StrictHostKeyChecking no" your_remote_server
This last tip is of course completely unacceptable from a pure security point of view :)
So one might make a "job" which writes the host keys as a constant, like:
echo "....." > ~/.ssh/known_hosts
just fill the dots from ssh-keyscan -t rsa {ip}, after you verify it.
That's correct, pipeline jobs will normally use the user jenkins, which means that SSH access needs to be given for this account for it work in the pipeline jobs. People have all sorts of complex build environments so it seems like a fair requirement.
As stated in one of the answers, each individual configuration could be different, so check under "System Information" or similar, in "Manage Jenkins" on the web UI. There should be a user.home and a user.name for the home directory and the username respectively. On my CentOS installation these are "/var/lib/jenkins/" and "jenkins".
The first thing to do is to get a shell access as user jenkins in our case. Because this is an auto-generated service account, the shell is not enabled by default. Assuming you can log in as root or preferably some other user (in which case you'll need to prepend sudo) switch to jenkins as follows:
su -s /bin/bash jenkins
Now you can verify that it's really jenkins and that you entered the right home directory:
whoami
echo $HOME
If these don't match what you see in the configuration, do not proceed.
All is good so far, let's check what keys we already have:
ls -lah ~/.ssh
There may only be keys created with the hostname. See if you can use them:
ssh-copy-id user#host_ip_address
If there's an error, you may need to generate new keys:
ssh-keygen
Accept the default values, and no passphrase, if it prompts you to add the new keys to the home directory, without overwriting existing ones. Now you can run ssh-copy-id again.
It's a good idea to test it with something like
ssh user#host_ip_address ls
If it works, so should ssh, scp, rsync etc. in the Jenkins jobs. Otherwise, check the console output to see the error messages and try those exact commands on the shell as done above.
I have my Hudson CI server setup. I have a CVS repo that I can only checkout stuff via ssh. But I see no way to convince Hudson to check out via ssh. I tried all sorts of options when supplying my connection string.
Has anyone done this? I gotta think it has been done.
If I still remember CVS, I thought you have to set CVS_RSH environment variable to ssh. I suspect you need to set this so that your Tomcat process gets this value inherited.
You can check Hudson system information to see exactly what environment variables the JVM is seeing (and passes along to the build.)
I wrote up an article that tackles this you can find it here:
http://www.openscope.net/2011/01/03/configure-ssh-authorized-keys-for-cvs-access/
Essentially you want to set up passphraseless ssh keys for your build user. This will allow authentication to occur without the need to work out some kind of way to key in your password.
<edit> i.e. Essentially the standard .ssh key client & server install/exchange.
http://en.wikipedia.org/wiki/Secure_Shell#Key_management
for the jenkins user account:
install user key (public & private part) in ~/.ssh (generate it fresh or use existing user key)
on cvs server:
install user key (public part) in ~/.ssh
add to authorized_keys
back on jenkins user account:
access cvs from command-line as jenkins user and accept remote host key (to known_hosts)
* note any time remote server changes key/ip you will need to manually access cvs and accept key again *
</edit>
There's another way to do it but you have to manually log from the build machine to your cvs server and keep the ssh session open so hudson/jenkins can piggyback the connection. Seemed kinda pointless to me though since you want your CI server to be as hands off as possible.