I have a X12 file in which I have Batch Number at BHT03 which I need to put in flowVars. When I am trying to set it in a flow variable I am able to access the payload till 837 tree structure. The structure from Heading onwards doesnt appear when I enter a dot after "837". Even after writing the path manually it fetches null. Is there any constraint that we cannot set value in flowvars with tree structure?
The structure/path is as follows: (want to set the below value in flow vars)
#[payload.TransactionSets.v005010."837".Heading.0100_BHT.BHT03]
Able to set the flowvars value as below:
#[payload.TransactionSets.v005010.837]
Try using:
#[message.payload.'TransactionSets'.'v005010'.'837'.'Heading'.'0100_BHT'.'BHT03']
Related
I need to insert some data from an XML document into an SQL table using a stored procedure. This should be done using the WCF-SQL adapter on a send port in Biztalk. I've set up the connection properties on the adapter, but I am missing the message part.
I'm currently using the below code with some hardcoded values inside a body template:
<SaveDocument xmlns="http://schemas.microsoft.com/Sql/2008/05/Procedures/dbo">
<conversationID>123456</conversationID>
<dataType>OIO</dataType>
<fromID></fromID>
<toID></toID>
<msgInfoExtension><![CDATA[<infoExt><fileInfo fileName="ublinvoice.xml" encoding="utf-8" /></infoExt>]]></msgInfoExtension>
<msgBody>
<bts-msg-body xmlns="http://www.microsoft.com/schemas/bts2007" encoding="string"/>
</msgBody>
<msgBodyBin></msgBodyBin>
</SaveDocument>
Instead of the hardcoded values, I need to grab some of the promoted properties in an XML document, but I'm unsure how to correctly go about doing this.
In the MS documentation I found this page, which describes the structure of the request: https://learn.microsoft.com/en-us/biztalk/adapters-and-accelerators/adapter-sql/message-schemas-for-procedures-and-functions
Distinguish the properties that you want to set in the SaveDocument schema
Create a map that populates the fields, the ones you want to set from the Promoted properties, just fill them with some constants from the map.
In an Orchestration have a Construct Message that contains both the map shape pointing to the above map and a message assignment shape.
In the message assignment shape have some statements like saveSG.conversationID = sourceMSG(PropmotedProperty).
P.S. I think you have manually tried to create the SaveDocument schema. This is probably not correct. The correct way is to create the stored procedure and then use the Generate Instance dialogue in Visual Studio, and to configure that to auto generate the schema for you, and as a bonus, it even generates a binding file containing the settings you need for your send port.
You might be able to use the often overlook Property Demotion feature.
It's basically the reverse of Promotion and is done by the XmlAssembler component.
I am trying to show images for products inside a basic report. The image needs to be dynamic, meaning the image should change based on the SKU value.
Right now I am inserting an image into a table, setting to external, and i've tried:
=Fields!URL.Value
=http://externalwebservername/sku= & Fields!SKU.Value
="http://externalwebservername/sku=" & Fields!SKU.Value
I do not get any images in my table.
My stored proc has all the data, including a URL with the image I wan't to show. Here is a sample of what the URL looks like:
http://externalwebservername/sku=123456
If I enter the URL in the field without "=" it will show that ONE image only.
How should I set up the expression to properly show the external image based on a dynamic URL? Running SQL 2016
Alan's answer should work, but in our environment we have strict proxy/firewall rules, so the two servers could not contact each other.
Instead we are navigating to the file stored on our storage system.
We altered the URL column to point to file path in the stored procedure. Insert image, set Source to External and Value set to [URL].
URL= file://server\imagepath.jpg
As long as the account executing the report has permissions to access the URLs then your 3rd expression should have worked.
I put together a simple example as follows.
I created a new blank report then added a Data Source. It doesn't matter where this points, we won't use it directly.
Then I created a dataset (Dataset1) with the following SQL to give me list of image names.
SELECT '350x120' AS suffix
UNION SELECT '200x100'
UNION SELECT '500x500'
Actually, these are just parameters for the website http://placehold.it/ which will generate images based on the size you request, but that's not relevant for this exercise.
We'll be showing three images from the following URLs
http://placehold.it/350x120
http://placehold.it/200x100
http://placehold.it/500x500
Next, create a table, I used 3 columns to give me more testing options. Set the DataSetName to DataSet1 if it isn't already.
In the first column the expression is just =Fields!suffix.Value
In the second column I added an image, set it's source property to External and the Value to ="http://placehold.it/" & Fields!suffix.Value
I then added a 3rd column with the same expression as the image Value so I could see what was being used as the image URL. I also added an action that goes to the same URL, just to check the URL did not have any unprintable characters in it that might cause a problem.
The basic report design looks like this.
The rendered result looks like this.
I have a simple conversion of JSON to XML using MuleSoft. In "Transform Message" component, I provided JSON Schema as Input and XML Schema as Output. When I run the app, the conversion happens if the file matches with both schema but it generates an empty XML file if it doesn't match.
I want below conditions:
1) If the file matches with schema, the converted output file should be sent to converted folder and the original file should move to Success folder.
2) If the file doesn't match with schema, the original file should move to the Failure folder instead of conversion.
Hope, I explained it comprehensively as I am new to MuleSoft. Here is a sample diagram which may simplify my requirement. Provide me with a new one if I badly designed the process.
First thing you need to create a flowVar that will hold your original payload.
When your doing your evaluation, if its XML then use a simple XPath expression like //elementName[not(node())]
Lastly, on your success use scatter-gather for multi-threading write. Pull your original payload from flowVar and write to Success and Write your regular payload to your Converted folder
I'm trying to pass a parameter into the File List component through input port 0. All of my attempts thus far have been met with an error,
Input edge has no effect. Disconnect edge or use metadata fields as parameters in Target URL, Source path or Target path.
Ideally, I would like the Target URL to be something along the lines of http://${S3_ACCESS_KEY}:${S3_SECRET_KEY}#${MY_BUCKET}.s3.amazonaws.com/reports/${port:0.value}/*_interestingReport.csv where ${port:0.value} is the value passed in from the input port.
What is the correct way to use data coming in on input port 0?
The way how passing parameters from input edge for File List (but other file components as well) works, is that you use the name of the metadata column from an input edge and enclose it between ${ and }.
So if the metadata on the edge have a field called directory, which contains the dir you want to use, this is the way how to do it.
http://${S3_ACCESS_KEY}:${S3_SECRET_KEY}#${MY_BUCKET}.s3.amazonaws.com/reports/${directory}/*_interestingReport.csv
Let me show you an example of a very simple graph which uses a 'Data Generator' that creates the flow and sends it as the input of a 'File List' component'.
http://www.filedropper.com/inputportfilelist_1
As you can see the way the input field is referenced is '${DATA_SOURCE_DIR}/${fileDir}/', being 'fileDir' the only field contained in the metadata of the link that connects both components. It'll basically list the files located in ${PROJECT}\data\source\manifests.
I hope this helps.
I have a SoapUI project which contains around 60 plus services. Each service requires some input which will be changed for every execution. So I have created certain Global Properties and assign some values to that properties.
I have to use these properties values in my SoapUI request ( i.e. JSON Format request ).
If it is groovy script means, I will use like this.
String HTiC_Username = com.eviware.soapui.model.propertyexpansion.PropertyExpansionUtils.globalProperties['HTiC_Username'].value;
But, how to get the value of the Global Property in the request?
Hope you understand my question. Please provide proper guidance.
Thanks
To dynamically "expand" (i.e. substitute) the value of a property into a test step, the following syntax is used: ${#scope#propertyName}
...where 'scope' refers to the level at which the property has been defined (e.g. Global, Project, TestSuite, TestCase).
So to expand a property named username defined as a Global property, for example, the following code can be used directly within a Request Test Step (e.g within a JSON body, or header value, etc):
${#Global#username}
To access the same property value within a Groovy Test Step, you can use the following syntax:
context.expand('${#scope#propertyName}')
...as in the following example:
context.expand('${#Global#username}')
What we did was the following:
created a test data file to store all the specific input data for the different services (testdata.properties)
Example content of testdata.properties:
Billing_customerID=1234567
OtherService_paymentid=12121212
....
create a SoupUi global parameter (File/Preferences/Global properties): testdata_filepath=C:\...
For specific services we added a Properties test step. You can specify the "Load from" field to our new global parameter: ${#Global#testdata_filepath} Now you can use the Load button to load parameters.
Finally you can reference the parameter in your xml in the following format: ${Properties#Billing_customerID}
Example content of a service with parameter:
...
<BillingCustomerIdentification>
<BillingCustomerID>${#Properties#Billing_customerID}</BillingCustomerID>
</BillingCustomerIdentification>
...
To set up your projects in this manner also helps to automate service tests eg. using Hudson (see my previous SO answer).
If it is too heavy and automation is not a target, you can simply use ${#Global#someinputvariable} format in your xml ;-)