Fixing :80 urls for Mediawiki with Nginx and apache - apache

Question

I'm trying to use Mediawiki, without getting the url to be like this.
https://roblox-network.com:80/tra/Special:RequestAccount
If i just remove :80 it works as it should.
Config file is below.
It should be a clean install, with restricted accounts.
But sadly i keep getting the :80 url many times, when i update every page.
So i have to remove :80 to update the pages.
<?php
error_reporting( E_ALL );
ini_set( 'display_errors', 1 );
# This file was automatically generated by the MediaWiki 1.17.0
# installer. If you make manual changes, please keep track in case you
# need to recreate them later.
#
# See includes/DefaultSettings.php for all configurable settings
# and their default values, but don't forget to make changes in _this_
# file, not there.
#
# Further documentation for configuration settings may be found at:
# http://www.mediawiki.org/wiki/Manual:Configuration_settings
# Protect against web entry
if ( !defined( 'MEDIAWIKI' ) ) {
exit;
}
## Uncomment this to disable output compression
# $wgDisableOutputCompression = true;
$wgSitename = 'TRA Wiki';
$wgMetaNamespace = "My_wiki";
$wgRightsPage = "YourWiki:Copyright";
$wgRightsText = "copyright Roblox Network";
## The URL base path to the directory containing the wiki;
## defaults for all runtime URL paths are based off of this.
## For more information on customizing the URLs please see:
## http://www.mediawiki.org/wiki/Manual:Short_URL
$wgScriptPath = '/tra';
$wgRunJobsAsync = false;
$wgArticlePath = $wgScriptPath.'/$1';
$wgScriptExtension = ".php";
## The relative URL path to the skins directory
$wgStylePath = "$wgScriptPath/skins";
## The relative URL path to the logo. Make sure you change this from the default,
## or else you'll overwrite your logo when you upgrade!
#$wgLogo = "$wgStylePath/common/images/wiki.png";
$wgLogo = "$wgStylePath/common/images/wiki.png";
## UPO means: this is also a user preference option
$wgEnableEmail = true;
$wgEnableUserEmail = true; # UPO
$wgEmergencyContact = 'info#roblox-network.com';
$wgPasswordSender = 'no-reply#roblox-network.com';
$wgEnotifUserTalk = false; # UPO
$wgEnotifWatchlist = false; # UPO
$wgEmailAuthentication = true;
## Database settings
$wgDBtype = "mysql";
$wgDBserver = 'mysql';
$wgDBname = 'REMOVED';
$wgDBuser = 'REMOVED';
$wgDBpassword = 'REMOVED';
# MySQL specific settings
$wgDBprefix = 'REMOVED';
# MySQL table options to use during installation or update
$wgDBTableOptions = "ENGINE=InnoDB, DEFAULT CHARSET=binary";
# Experimental charset support for MySQL 4.1/5.0.
$wgDBmysql5 = false;
## Shared memory settings
$wgMainCacheType = CACHE_NONE;
$wgMemCachedServers = array();
## To enable image uploads, make sure the 'images' directory
## is writable, then set this to true:
$wgEnableUploads = true;
$wgUseImageMagick = true;
$wgImageMagickConvertCommand = "/usr/bin/convert";
# InstantCommons allows wiki to use images from http://commons.wikimedia.org
$wgUseInstantCommons = false;
## If you use ImageMagick (or any other shell command) on a
## Linux server, this will need to be set to the name of an
## available UTF-8 locale
$wgShellLocale = "en_US.utf8";
## If you want to use image uploads under safe mode,
## create the directories images/archive, images/thumb and
## images/temp, and make them all writable. Then uncomment
## this, if it's not already uncommented:
#$wgHashedUploadDirectory = false;
## If you have the appropriate support software installed
## you can enable inline LaTeX equations:
$wgUseTeX = false;
## Set $wgCacheDirectory to a writable directory on the web server
## to make your wiki go slightly faster. The directory should not
## be publically accessible from the web.
#$wgCacheDirectory = "$IP/cache";
# Site language code, should be one of ./languages/Language(.*).php
$wgLanguageCode = 'en';
$wgSecretKey = "REMOVED";
# Site upgrade key. Must be set to a string (default provided) to turn on the
# web installer while LocalSettings.php is in place
$wgUpgradeKey = "REMOVED";
## Default skin: you can change the default skin. Use the internal symbolic
## names, ie 'standard', 'nostalgia', 'cologneblue', 'monobook', 'vector':
$wgDefaultSkin = "vector";
## For attaching licensing metadata to pages, and displaying an
## appropriate copyright notice / icon. GNU Free Documentation
## License and Creative Commons licenses are supported so far.
#$wgEnableCreativeCommonsRdf = true;
$wgRightsPage = "Roblox Network"; # Set to the title of a wiki page that describes your license/copyright
$wgRightsUrl = "https://roblox-network.com/terms/";
$wgRightsText = "";
$wgRightsIcon = "";
# $wgRightsCode = ""; # Not yet used
# Path to the GNU diff3 utility. Used for conflict resolution.
$wgDiff3 = "/usr/bin/diff3";
# Query string length limit for ResourceLoader. You should only set this if
# your web server has a query string length limit (then set it to that limit),
# or if you have suhosin.get.max_value_length set in php.ini (then set it to
# that value)
$wgResourceLoaderMaxQueryLength = -1;
# End of automatically generated settings.
# Add more configuration options below.
require_once "$IP/skins/Vector/Vector.php";
# ------------------ Below is the custom settings. ----------------------------
require_once "$IP/extensions/ConfirmAccount/ConfirmAccount.php";
require_once "$IP/extensions/SecurePoll/SecurePoll.php";
$wgShowSQLErrors = true;
$wgDebugDumpSql = true;
$wgShowDBErrorBacktrace = true;
$wgConfirmAccountContact = 'tra#roblox-network.com';
# ------------------ Below is the custom permissions. ----------------------------
$wgGroupPermissions['sysop']['securepoll-create-poll'] = true;
# ------------------ Below is loginform permissions. ----------------------------
$wgAccountRequestMinWords = 10;
$wgConfirmAccountRequestFormItems['Biography']['enabled'] = false;
$wgMakeUserPageFromBio = false;
$wgAutoWelcomeNewUsers = false;
$wgConfirmAccountRequestFormItems = array(
'UserName' => array( 'enabled' => true ),
'RealName' => array( 'enabled' => false ),
'Biography' => array( 'enabled' => false, 'minWords' => 50 ),
'AreasOfInterest' => array( 'enabled' => false ),
'CV' => array( 'enabled' => false ),
'Notes' => array( 'enabled' => true ),
'Links' => array( 'enabled' => false ),
'TermsOfService' => array( 'enabled' => true ),
);
# ------------------ Below is loginform restricted. ----------------------------
function efLoginFormMessage( &$template ) {
$template->set( 'header', "(For an account to edit articles with, contact Mr.Master3395, info#roblox-network.com )");
return true;
}
$wgHooks['UserLoginForm'][]='efLoginFormMessage';
# End of automatically generated settings.
# Add more configuration options below.
require_once "$IP/skins/Vector/Vector.php";
# Disable reading by anonymous users
$wgGroupPermissions['*']['read'] = true;
# But allow them to access the login page or else there will be no way to log in!
# (You also might want to add access to "Main Page", "Help:Contents", etc.)
$wgWhitelistRead = array ("Special:Userlogin");
# Disable anonymous editing
$wgGroupPermissions['*']['edit'] = false;
# Prevent new user registrations except by sysops
$wgGroupPermissions['*']['createaccount'] = false;
# ------------------ Below is Group Permissions. ----------------------------
$wgGroupPermissions['*']['edit'] = false;
$wgGroupPermissions['user']['edit'] = false;
$wgGroupPermissions['sysop']['edit'] = true;
# ------------------ Below is Uploads. ----------------------------
$wgUploadPath = "$wgScriptPath/uploads"; ## Wiki 1.5 defaults to /images, but allows more than just images
$wgUploadDirectory = "$IP/uploads"; ## Wiki 1.5 defaults to /images, but allows more than just images
## To enable image uploads, make sure the above '$wgUploadPath' directory is writable by Apache User or group.
## ''(i.e. chmod og+w uploads images)'' then the following should be true:
$wgEnableUploads = true;
$wgUseImageMagick = true;
$wgImageMagickConvertCommand = "/usr/bin/convert";
## If you want to use image uploads under safe mode, create the directories images/archive, images/thumb and
## images/temp, and make them all writable. Then uncomment this, if it's not already uncommented:
$wgHashedUploadDirectory = false;
# ------------------ Below is Uploads. ----------------------------
// Add just one filetype to the default array
$wgFileExtensions[] = 'pdf';
// Add several file types to the default array
$wgFileExtensions = array_merge(
$wgFileExtensions, array(
'pdf', 'ppt', 'jp2', 'webp', 'doc','docx', 'xls', 'xlsx'
)
);
// Override the default with a bundle of filetypes:
$wgFileExtensions = array(
'png', 'gif', 'jpg', 'jpeg', 'jp2', 'webp', 'ppt', 'pdf', 'psd',
'mp3', 'xls', 'xlsx', 'swf', 'doc','docx', 'odt', 'odc', 'odp',
'odg', 'mpp'
);
$wgMimeDetectorCommand = "file -bi";
# ------------------ Below is Google Analytics. ----------------------------
require_once "$IP/extensions/googleAnalytics/googleAnalytics.php";
// Replace xxxxxxx-x with YOUR GoogleAnalytics UA number
$wgGoogleAnalyticsAccount = 'UA-37062089-17';
// Add HTML code for any additional web analytics (can be used alone or with $wgGoogleAnalyticsAccount)
$wgGoogleAnalyticsOtherCode = '<script type="text/javascript" src="https://analytics.example.com/tracking.js"></script>';
// Optional configuration (for defaults see googleAnalytics.php)
// Store full IP address in Google Universal Analytics (see https://support.google.com/analytics/answer/2763052?hl=en for details)
$wgGoogleAnalyticsAnonymizeIP = false;
// Array with NUMERIC namespace IDs where web analytics code should NOT be included.
$wgGoogleAnalyticsIgnoreNsIDs = array(500);
// Array with page names (see magic word Extension:Google Analytics Integration) where web analytics code should NOT be included.
$wgGoogleAnalyticsIgnorePages = array('ArticleX', 'Foo:Bar');
// Array with special pages where web analytics code should NOT be included.
$wgGoogleAnalyticsIgnoreSpecials = array( 'Userlogin', 'Userlogout', 'Preferences', 'ChangePassword', 'OATH');
// Use 'noanalytics' permission to exclude specific user groups from web analytics, e.g.
$wgGroupPermissions['sysop']['noanalytics'] = true;
$wgGroupPermissions['bot']['noanalytics'] = true;
// To exclude all logged in users give 'noanalytics' permission to 'user' group, i.e.
$wgGroupPermissions['user']['noanalytics'] = true;
# ------------------ Below is Logo. ----------------------------
$wgLogoHD = array(
"1.5x" => "images/main/wiki.png",
# "2x" => "images/main/wiki.png"
);
# The URL path of the shortcut icon.
# #since 1.6
#/
#$wgFavicon = 'images/main/favicon.ico';
# The URL path of the icon for iPhone and iPod Touch web app bookmarks.
# Defaults to no icon.
# #since 1.12
#/
$wgAppleTouchIcon = false;
# ------------------ Below is Login Link. ----------------------------
$wgHooks['PersonalUrls'][] = 'onPersonalUrls';
function onPersonalUrls( array &$personal_urls, Title $title, SkinTemplate $skin ) {
// Add a link to Special:RequestAccount if a link exists for login
if ( isset( $personal_urls['login'] ) || isset( $personal_urls['anonlogin'] ) ) {
$personal_urls['createaccount'] = array(
'text' => wfMessage( 'requestaccount' )->text(),
'href' => SpecialPage::getTitleFor( 'RequestAccount' )->getFullURL()
);
}
return true;
}

Answer 1

Looks like your issue is connected to Confirm Account extension only, because all other links seems to be fine. I've noticed that $wgServer is missing from your config, so try to specify $wgServer variable in LocalSettings.php like this:
$wgServer = "https://roblox-network.com";

Answer 2

https is default port 443 and port 80 is reserved for http.
The problem indicates that port 80 is not handling SSL.