Related
It seems I have a path error, I can see proof the package installed, and I've tried it both globally and local, tried both with and w/o the -cli suffix, but zshell keeps complaining command not found
dr_frankenmiller#Bryans-MacBook-Pro ~ % npm install ganache-cli
npm WARN deprecated ganache-cli#6.12.2: ganache-cli is now ganache; visit https://trfl.io/g7 for details
added 1 package, and audited 102 packages in 11s
2 packages are looking for funding
run npm fund for details
9 vulnerabilities (8 moderate, 1 high)
To address issues that do not require attention, run:
npm audit fix
To address all issues (including breaking changes), run:
npm audit fix --force
Run npm audit for details.
dr_frankenmiller#Bryans-MacBook-Pro ~ % npm ls --depth=0
dr_frankenmiller# /Users/dr_frankenmiller
└── ganache-cli#6.12.2
dr_frankenmiller#Bryans-MacBook-Pro ~ % ganache-cli
zsh: command not found: ganache-cli
I might have done something bad, using a sudo rm -rf node_modules command to uninstall the package, was that dangerous to do? I reinstalled it globally and then tried running it again, and then zshell started complaining I wasn't authorized to run ganache. I tried the command sudo ganache, it asked me for password, and then responded again that command not found.
Can someone help me get back on track with my tutorial?
According to Ganache-CLI's instructions, it should be installed with:
npm install ganache-cli -g
I'd recommend installing the latest Ganache version rather than installing Ganache-CLI, though. Ganache-CLI is deprecated. Use
npm uninstall ganache-cli && npm install ganache -g
Ganache v7.0.0 and onward can be used in the CLI as well as programatically.
On another note, I strongly recommend against using sudo when installing anything via npm. This can give untrusted code the ability to run as admin on your system. Definitely a big security risk.
Just a follow up on difficulties I was having, I ended up using yarn to download and run ganache (MINUS the -cli suffix, -cli suffix now deprecated), yarn install ganache --global to install and then yarn ganache to run (no -cli necessary)
Here's how I found the solution for my specific use case. The bug came about when I was attempting to run a brownie deployment script. Run npm uninstall ganache-cli then run yarn global add ganache. Worked like a charm.
I tried to install expo after I executed the command exp start but I got:
Something went wrong installing the "sharp" module
Cannot find module '../build/Release/sharp.node'.
How can I fix this problem?
I had the same problem and this single line command did the trick.
npm rebuild --verbose sharp
Consult the installation documentation at Common problems.
Find the latest version of sharp and install it.
npm install sharp#0.28.3 --save
This worked for me.
I am not using expo but faced this issue in react native.
All I did is "deleted node_modules/sharp" folder.
run npm install.
fixed the issue.
Maybe you configured npm to ignore installation scripts. In that case delete the sharp module and run:
npm install --ignore-scripts=false
This causes after i updated, npm,angular version.
just try
npm i cordova-res
it solves above problem.
I was facing same issue in mac when I update my developer tools using xcode-select install then node project stop working on local
sudo rm -rf /usr/local/Cellar/python3.8
sudo rm -rf /usr/local/Cellar/python3.9
rm yarn.lock
rm package-lock.json
rm -rf node_modules
brew upgrade
yarn install
worked for me
If anyone has this problem and other solutions didn't solve it. Try to uninstall vips globally, it worked for me.
npm -g uninstall libvips
brew uninstall vips
Then:
yarn clean
yarn install
gatsby develop
if trying some quick command fixes don't work you can try rebuilding the node_modules.
Delete the whole node_modules folder and run npm install
npm install
Upgrading of gatsby-transformer-sharp helped me in my case.
You may need to completely reinstall expo-cli package.
yarn global remove expo-cli
yarn global add expo-cli
OR
npm uninstall expo-cli -g
npm install expo-cli -g
(If you don't have expo-cli installed globally, remove global / -f flags)
I am a newbie in all this stuff. Hope for your understanding.
Let me clarify the issue:
I am trying to start react native app through expo cli. So tried to start npm install expo-cli --global to install npm globally. I got these errors:
Screen_1
Screen_2
It also says that I lack permissions to access it. How can I allow permissions?
Even when I try to start it locally I got the same issue. Your help is appreciated.
although this solution is not the best and the safest solution exists, this worked for me and that make sense because all the problem we had with the errors is the permission problems. so you can use this command and ignore those permission problems :
sudo npm install expo-cli -g --unsafe-perm
I was having the same problem with npm install -g expo-cli, having "MODULE_NOT_FOUND",
I installed yarm with brew, just in case you do not already have it:
brew install yarn
and then use:
yarn global add expo-cli
to create a project you can:
expo init nameOfTheNewProject
and choose a template in the console.
Finally run the project with
yarn start
Let me know if it works for you!
You did not mention which os. This answer working for any operating system (ubuntu in my case)
I'm also getting permission errors when running
sudo npm install --global expo-cli
Which I don't really how this can happen - as this also happens for the superuser!
For me it works when I install the client locally into the project
cd <new-project-dir>
npm init # init npm project
npm install expo-cli
Now you can use the client in this project like this:
npx expo-cli # e.g. npx expo-cli init <project-name>
npm cache clean --force
This will solve the issue
Try using npm install -g expo-cli#3.5.0 this worked for me, it may work for you.
You can try this command:
npm install -g expo-cli
or,
yarn global add expo-cli
You have to run the command as administrator from a command prompt on windows and not bash. Had me stumpt for bloody ages!
You need administrator privilege. So when you open command line interface, just right click and run as administrator
This will solve the problem
I guess, this issue comes from permission or node version , if you get this error when the node module is being refreshed ---> This is definitely a permission issue. Disable your Antiviruses or change permission manually check this as well.
First run npm cache verify, then run sudo npm install --global expo-cli.
Did work for me indeed after trying so much.
Follow the steps
First, run npm cache verify.
Open Windows PowerShell as administrator and run npm install expo-cli
--global --no-optional command.
npm cache clean --force then npm install --unsafe-perm -g expo-cli
It is likely you do not have the permissions to access this file as the current user.
The best way to solve this problem is to reinstall npm with a node version manager.And you don't need to remove your current version.
About node version manager
use nvm or n with OSX or Linux
use nodist or nvm-windows with windows
Upgrade Node version to +10
Then do
sudo npm install expo-cli -g
This worked for me. I hope this would solve your problem!
sudo npm install expo-cli -g --unsafe-perm=true --allow-root
If any of the solutions above result in success, please follow the steps below:
Uninstall Node.js
Restart your pc/mac
Download latest version of the Node.js (https://nodejs.org/en/)
Open cmd as admin mode or use "sudo" before the command line on Mac.
npm install expo-cli --global
I hope it can help
In my case, I deleted two files then everything worked. The two files are in this path: C:\Users\{Username}\AppData\Roaming\npm under the names 'expo.ps1' and 'expo-cli.ps1'
Then run:
npm i -g expo-cli
re-install node.js, it works for me
First update Node.js to the latest stable version and then again try to install expo ad clean before expo folders that are being created in below location
C:\Users\{{computer_username}}\AppData\Roaming\npm
If it's throwing error in visual studio code, try from cmd, was facing same error but solved through this way
npm install -g expo-cli
try going into windows resource monitor and terminating adb.exe (android resource bridge). This worked for me after searching for solutions for days. I tried this after verifying cache, clearing cache, you name it.
As a Debian 10 buster user I got the same permission error while using this command: sudo npm install expo-cli --global.
The problem was solved by installing expo-cli with yarn package manager and the command below: sudo yarn global add expo-cli.
For Windows User :-
Open your Powershell and type:
npm install expo-cli --global
This worked for me after trying and reasearching for hours.
Note:Don't Use cmd or any other terminal and also don't type npm install expo-cli -g as it is written in the react native docs. It would always show up an npm error.
For windows
Follow these steps carefully
open the command prompt and run it as administrator.
recommended npm uninstall --global expo-cli.
run the command npm cache clean --force.
run the command npm cache verify .
now run the command npm install --global expo-cli
dont run command like npm i -g expo-cli or npm install -g expo-cli.
7.Make sure you run the command mentioned in the 4th step ONLY.
thankyou.
I had this problem in Windows 10, to be able to install the latest version (I had no choice since it broke the current one). I had to install the latest version of Python (3.8.0) and then run npm install --global --production windows-build-tools as an administrator, then I was able to run again: npm install expo-cli --global to install the version 3.8.0 of the expo-cli
Here is the solution and 100% working. I am working with Windows and not sure abut Linux.
Open cmd and
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser
then press yes
Now run the command to start your project
npm install -g expo-cli
I had previously removed Expo from my Windows machine and encountered this error whilst trying to reinstall. Reading the error message solved the problem.
npm i expo-cli -g --legacy-peer-deps
Using this command in 'PowerShell' installed expo successfully.
If anyone else has this problem here is my fix, go to Finder, in the input field (search box) type in /usr/local/lib then press CMD + SHIFT + G press the OK button or whatever pops up, then CMD + SHIFT + . and delete the NVM file i deleted the expo folder too. Then go to this link https://changelog.com/posts/install-node-js-with-homebrew-on-os-x
follow the instructions and install brew, node, etc. Last step go to your terminal and type sudo npm install expo-cli --global
First: I upgraded my mac version 10.13 to 10.15
Then I downloaded homebrew, Watchman, Git and Node.js
Finally I ran this command sudo npm install --global expo-cli --legacy-peer-deps
If you have any further questions check the docs out: https://docs.expo.dev/get-started/installation/
Sometime, I use npm not work.
I try a lots times run with npm but fail for expo cli.
Please try yarn global add expo-cli
It wills save your time ^^.
I was trying to install expo-cli with my company npm registry configured.
I've created 2 differents profiles using npmrc and using the profile with https://registry.npmjs.org/ solved the issue.
While installing the dependencies of vue-cli, vue is not identified. Why?
rm -rf node_modules and npm install again
have a look here
Add sudo before yarn when installing
yarn global remove #vue/cli
sudo yarn global add #vue/cli
vue
I had the same issue for a while.
TL;DR
npm install #vue/cli-service --save-dev
As the documentation specify it is a development dependency https://cli.vuejs.org/guide/#cli-service
The CLI Service (#vue/cli-service) is a development dependency. It's an npm package installed locally into every project created by #vue/cli.
Origin
I had a fresh install of nodejs
And just did
>> sudo npm install -g #vue/cli#latest
>> vue --version
#vue/cli 4.5.8
The issue
The issue presented like this
>> npm run serve
yarn run v1.22.10
$ vue-cli-service build --mode development --watch
/bin/sh: 1: vue-cli-service: not found
error Command failed with exit code 127.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
The fixes:
npm install #vue/cli-service --save-dev
Which led me straight to another error message
>> npm run serve
yarn run v1.22.10
$ vue-cli-service build --mode development --watch
ERROR Error: Cannot find module 'vue-template-compiler/package.json'
Which I fixed the same way
npm i vue-template-compiler --save-dev
And now it is working fine.
Installing current version without permanently installing vue-cli.
npx #vue/cli create appname
It shows the vue executable is located at /home/alisha/.local/bin. So probably this location is not there in your $PATH.
You should be able to run the vue commands if you provide the full path, like:
~/.local/bin/vue create hello-world
You can also see if that directory is in your PATH by running some command like:
echo $PATH | grep '.local/bin/'
If it's there, you would see it, otherwise you can add it to your path by placing it in your ~/.profile.
Edit ~/.profile and add the following at the bottom of it.
PATH="$HOME/.local/bin:$PATH"
Hope it helps!!
I had the same issue while making a build for production.
You will require vue-cli to be installed. Use below command to install the latest version.
npm install -g #vue/cli#latest
Then
npm install
Might have to do with you having an old version on your computer:
Warning regarding Previous Versions
The package name changed from vue-cli to #vue/cli. If you have the previous vue-cli (1.x or 2.x) package installed globally, you need to uninstall it first with
npm uninstall vue-cli -g or yarn global remove vue-cli.
You can find it here: https://cli.vuejs.org/guide/installation.html
THIS FIXED THE ISSUE FOR ME:
After running
sudo npm install -g #vue/cli
I ran
sudo nano $HOME/.profile
and pasted the following line
export PATH=$PATH:/home/chike/.npm-global/bin
after writing the code, next thing I did was Ctrl + O, ENTER and Ctrl + X then wrote
vue init webpack myapp
When you install vue using cli that time you got the path of vue.Now you can copy the bin folder path.
In my example /home/sublime/.npm-packages/bin
Now you export the path below command
export PATH=$PATH:/home/sublime/.npm-packages/bin
I solved mine by running (add sudo if needed)
npm i -g vue-cli#2.9.6
npm i -g #vue/cli
Got similar issue when deploy vue project in jenkins.
Here is what I did:
Add node's bin/ dir, to jenkins user's .bashrc file.
e.g
# node
NODE_HOME=/home/dev/.nvm/versions/node/default
PATH=$NODE_HOME/bin:$PATH
Tips - about nvm & yarn
When you manage node version via nvm, make sure you already choose the node version in terminal. e.g:
nvm use stable
node -v
If you use nvm, and installed yarn via npm, then better install vue-cli via npm not yarn, otherwise the vue executable is not placed into node's bin/ dir, at least that's the case in my tests, and as a result will cause you fail to find the vue command.
Using Yarn on Ubuntu it is installed to ~/.npm-packages/bin/. You must add this directory to your PATH. For example run the following command, close your terminal and open a new one.
user#machine:~$ echo 'export PATH="$PATH:~/.npm-packages/bin/"' >> ~/.bashrc
Note: if the file ~/.bashrc does not exist then simply create it.
Following worked for me:
First remove all the existing ones:
yarn global remove #vue/cli
yarn global remove #vue/cli-service
sudo yarn global remove #vue/cli
sudo yarn global remove #vue/cli-service
Then add #vue/cli using sudo:
Note: use sudo if required
yarn global add #vue/cli
yarn global add #vue/cli-service
Then, the final thing to do is to RESTART the terminal.
vue --version
#vue/cli 4.5.9
If you already got a project, the only two things you need to do is:
Delete the directory node_modules (it is safe, since it is not under git and will regenerate in the next step)
In the command-line write yarn install (it will install everything you need)
If you start installing vue-cli manually in a existing project, it the package.json and package-lock.json will be updated. If you already did. Do a checkout from git, and follow my steps above
This may be a problem caused by version conflicts. "export PATH=$PATH:" This is really useful in some cases. But if you are also like me, after trying the direct “export path” method in the comment above, restarting the terminal still can not execute the situation, you can try this way.
Uninstall Vue
npm uninstall -g #vue/cli
Check the local-global npm package installation path, vue is installed in this directory, check if it has been removed.
npm root -g
Install vue (you can check with https://cli.vuejs.org/#getting-started to find the latest command)
npm install -g #vue/cli
Create a connection to the /usr/local/bin directory(You need to find the vue.js path after the local installation first, then replace this path with your latest local install path:/Users/xxxxx/.npm-global/lib/node_modules/#vue/cli/bin/vue.js)
ln -s /Users/xxxxx/.npm-global/lib/node_modules/#vue/cli/bin/vue.js /usr/local/bin/vue
View version number
vue -v
I was getting the same error because Node.js was not installed. My issue got resolved by installing Node.js using the following command:
sudo apt install nodejs-legacy
To see if you already have Node.js and npm installed and check the installed version, run the following commands:
node -v
npm -v
If both are installed then follow the steps here:
https://docs.npmjs.com/resolving-eacces-permissions-errors-when-installing-packages-globally
I installed the package using yarn global add #vue/cli on my Ubuntu box and found the binary in /home/vonkad/.yarn/bin.
I had to modify my /home/vonkad/.bashrc and add the directory to the path export PATH=$PATH:/home/vonkad/.yarn/bin.
To fix this situation, I had to add the following line to my .zshrc (maybe in your case is .bashrc)
export PATH="$(yarn global bin):$PATH"
Effectively, the yarn global bin is a folder where vue (vue-cli 3) was placed.
What helped me
mac os catalina with zsh terminal
Uninstalled node and npm using https://www.positronx.io/how-to-uninstall-node-js-and-npm-from-macos/
Downloaded node/npm from https://nodejs.org/en/download/current/
sudo npm install -g #vue/cli
vue --version (#vue/cli 4.5.4)
I faced the same issue and now resolved. In my case I installed Node.js and NPM using the default Ubuntu repository by using this command sudo apt-get install nodejs npm
The problems seemed like those 2 packages are not well maintained so it caused some bugs.
So I purge those packages and reinstall it from nodesource which is officially recommended way to install (reference: Installation instruction from nodesource) using these commands.
curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bash -
sudo apt-get install -y nodejs
Then reinstall #vue/cli again
sudo npm install -g #vue/cli
Now these issues have gone. Hope it helps some programmers.
You need to install vue via sudo like explained in the doc:
https://cli.vuejs.org/guide/installation.html
If you have WSL2 running and you use zsh like me, just add
yarn global add #vue/cli
# add this line to ~/.zshrc
export PATH="$HOME/.yarn/bin:$PATH"
$ vue --version
#vue/cli 4.x.xx
You can try the following code install see
npm install --global vue-cli
vue init webpack <YOUR-PROJECT-NAME-HERE>
cd <YOUR-PROJECT-NAME-HERE>
npm install
npm run dev
After updated Node (upto v8.6.0) and npm (upto v5.5.1) I cannot execute command npm install.
After npm install I've error message:
npm ERR! Cannot read property '0' of undefined
What's trouble or I need downgrade node/npm ?
I had the same problem.
I removed both node_modules and package-lock.json and then did:
npm install
And it worked.
Edit by #OwlyMoly
Due to new updates and the restriction to old dependencies in package-lock.json is causing this conflicts. By doing npm install won't fix this issue. Instead by ditching npm_modules and package-lock.json and doing npm install will load a new node_modules and that supposed to be required by package.json. You have to commit the new package-lock.json along with your latest changes of the project.
Do 2 steps bellow (Window):
rm -rf ./node_modules to remove node folder
rm package-lock.json to remove package-lock.json file
then npm install to re-install the node modules
Just download and install latest Yarn which is also a node package manager, developed by facebook, but has a much better dependency management. Also update your node cli (optional).
And then, install your dependencies using yarn:
yarn install
or
yarn // short version of yarn install
No errors!
You can continue to use npm after you have installed all dependencies with yarn or continue with yarn....it's your choice.
I've made some tests:
nodejs#8.6.0 npm#5.5.1 - I have trouble and the test fails
nvm use 8.5.0
nodejs#8.5.0 npm#5.5.1 - I have trouble and the test fails
nvm use 8.4.0
nodejs#8.4.0 npm#5.5.1 - I have trouble and the test fails
npm install npm#^5 -g
nodejs#8.4.0 npm#5.4.2 - I have trouble and the test fails
nvm use 8.6.0
npm install npm#^4 -g
nodejs#8.6.0 npm#4.6.1 - no trouble, this fixes it.
Seems to be an issue with a combination of factors.
Some workarounds here:
https://github.com/npm/npm/issues/18238
npm 5.3.0 is broken for windows 10 after upgrading the nodeJS.
You should downgrade the npm, it is a temporary solution but works fine.
npm install -g npm#5.2.0
For me (npm#6.9.0) solved the issue by deleting node_modules and performing npm install, but without removing package.json.lock file.
Just remove both node_modules and package-lock.json and run: npm install
or
Just run: npm install -g npm#latest to upgrade it to the latest version
Try with nvm(Node Version Manager).it help you to install any node version for any project without any Error.
I found same problem when using npm version 5.5.1 to install babel-preset-stage-0
Solution:
I downgraded npm to version 5.2.0 and try to install again then it can solve the issue.
npm i -g npm#5.2.0
npm i -D babel-preset-stage-0
I bumped into this issue using nvs (Node Version Switcher - https://github.com/jasongin/nvs) node#10.15.3 and npm#6.9.0. The reason was a local package I had linked with npm link. The solution was to remove that folder.
In my case reinstalling node_modules have not fixed this issue.
Problem was with one *.ts file which was missing in source codes.
Do not know why It was not displaying compilation error, but adding this missing file to repository solved this issue.
Upgrading npm to version 7.5.4 did the job for me.
npm install -g npm#latest
What worked for me:
npm ci
Install a project with a clean slate
docs: https://docs.npmjs.com/cli/v7/commands/npm-ci
Deletes node_modules and installs everything based on package-lock.json, so no need to regenerate that