IntelliJ IDEA / WebStorm:
I frequently manage and tweak my live templates and I'm getting very tired of having to navigate each time to the live templates screen. How can I make a shortcut to instantly jump right to the Live Templates settings screen? Or any other settings screen for that matter? Must I use automation with AutoHotKey or is there a better way?
And yes, I am already familiar with the shortcut key to define a new live template -- that's not what I'm looking for. I simply want to jump to the settings screen in one keystroke.
UPDATE:
Going with Chistoph's suggestion, here is my AutoHotKey snippet in case anybody's interested. It's far from perfect; you might need to adjust the timing values for your system:
#IfWinActive,.* - WebStorm 201
!t::
KeyWait, LAlt
Sleep 600
Send {LShift}{LShift}
Sleep 100
Send Live Templates
Sleep 300
Send {Enter}
return
#IfWinActive ; turns off context sensitivity
As of IntelliJ/WebStorm 2016.2 and earlier, there is no built-in functionality to assign a shortcut to a specific settings screen, but it's fairly trivial to implement that in a third-party plugin.
Note that the Settings dialog remembers the last selected settings page, so if you're working with the same settings page most of the time, you shouldn't need to navigate to it.
One method you can use:
Double press shift in your editor, then click on the gear icon for settings. Turn on Show IDE settings there.
Afterwards you can double press shift and enter Live Templates in the prompt, press Enter and you are in the right settings screen.
Related
I’m not sure what are these called:
I mean the Show code with my wire stats, Show Memory indicator, etc..
Basically, I’m mostly interested so this autocomplete menu would only show files, or at the very least would prioritise files. How can this be achieved?
I’m in version 2022.2.1.
That popup is called Search Everywhere and you are on an "All" tab that includes combined results from Classes, Files, Symbols, Actions etc.
Either manually switch to the desired tab (using a mouse or by hitting Tab needed number of times) or invoke this popup for the desired search from the start. For that just use the shortcut for Navigate | File... (Ctrl + Shift + N here on Windows keymap).
https://www.jetbrains.com/help/idea/searching-everywhere.html
Found the solution.
These things are called Actions, and the can be disabled in menu that appears after clicking the small funnel icon in the top right:
I tested, these changes seem to 'survive' a restart.
Yes, at the moment it is remembered only during the session.
https://youtrack.jetbrains.com/issue/IDEA-229285 -- watch this ticket (star/vote/comment) to get notified about any progress.
(P.S. The same happens with Find in Files popup (IDEA-143972) and a few others similar popups as well)
I have a bug which is completely over the planet. IntellIJ doesn't display. It's on, yet doesn't display.
It worked well before, last thing I did was re-setting up new dependencies on my code and (nothing to do with that) re-setting SDK for other reasons, both of which shouldn't be linked to display properties.
As you can see it's working, I see the pop up windows:
But doesn't display:
Yet I can see IntelliJ windows with Shift + Tab:
and yes, my screen doesn't duplicate, so it's not hidden in another dimension or something
I tried:
restart computer
uninstall install IntelliJ
uninstall install IntelliJ without previous parameters
try other JetBrains software, like DataGrip, it works and displays well
call a homeopathic doctor
Unsuccessfully. So I knee and await before your judgement of this critical situation.
I have this exact same behavior happen to me when I use IntelliJ at work and then go home and try to use it via Remote Desktop. Its very strange (regardless of which monitor I leave it on at work when I leave).
If I hover over it in the task bar and then hover over the thumbnail for the running app, I can right click and tell it to maximize and it magically comes back into focus. Sometimes I have to tell it to restore and then to maximize before this works.
Occasionally even this doesn't work and I have to close it, re-open, and do the same. It makes no sense, so I understand your frustration.
It works
As John Humphreys - w00te mentionned, click right over the thumbnail (I insist: the thumbnail ! Not the taskbar icon) and then select maximize and voilà.
Bon appétit.
Thanks for your contribution and I hope it will help some people in need here.
I have had this issue when I have moved from a dual monitor setup to a single monitor setup or a different dual monitor set up. The issue here that intellij window seems to save and use the coordinates of the last dual window setup to render the window. It doesn't matter you restart your computer, it will always try and render to that position, even if that position is not visible on the new monitor set up. On windows there is an easy way to fix this issue. Go to your display setting and flip the order of the windows. The intellij window should now be visible. you can drag the window to the your other monitor and re-arrange the windows back to the order you had previously. After that, you can place the intellij window wherever you want.
In my case I noticed there is a 1 pixel thick gray line on my screen, turns out that was the IDEA window and I could resize upon hovering that line. Needless to say it wasn't me shrinking it.
I have this same behavior, It happens to me when I connect a monitor in extended mode and move the intellij window to the monitor, then disconnect without moving it back. No other solution other than to connect to monitor again and bring it back to the original window for me works.
On mac, select the app from the app tray so that the menu for it appears up top. Then on the menu up top, go to Windows->Zoom and it should expand to fill the viewport.
From there you can drag it down to size and reposition.
Just like this question here:
IntelliJ: After hiding my "Output" sub-panel within the "Debug" panel, how do I get it back?
I canno get the log/console viewer back in debug mode.
The suggested solution in the given question no longer works the "restore layout" button does nothing, and the "certain spot" on the debug is extremely vague at best.
Is there a way to retrieve the console if it gets vanished (or better yet, just stop that button for vanishing it from even existing)?
I am using IntelliJ 12 Ultimate. If the restore layout didn't work for you either, this should fix the problem:
Open the Debug panel.
Keep mouse on the Debug tab and move it straight right to the Watches icon.
You may see a few more more icons here, and Output may or may not be visible (not visible for me)
If visible, click it and the Output view will be restored.
If not visible, move your mouse slowly to either side of the Watches icon and an empty block would highlight indicating that you are hovering over an icon. There may be several of these. Use tooltip to figure out which is Ouput and click it.
Worked for me, I hope it works for you too.
click the button on the left of Debug View called "restore layout",then the console will go back in the Debug View! 1
Syed explained it pretty well, but a picture could be even better:
A view can be hidden via its context menu, then restored by clicking the corresponding icon (with red circle) to the right.
You can restore the layout using this button as of 2018.1.8
In 2016.2, I had to re-run in debug mode for it to reappear. I could not find a way to un-hide the console in the debug window.
You don't say which version of IntelliJ you're using, but I've just tried this in version 12 and the console window minimises to the far right of the debugger tabs. Look at where it says 'Debugger' and then eyes right until you see one or more icons over the Watches panel. Try clicking on them. If you're not using version 12, then only god can help you :)
In v. 2020.1 there is Layout Settings on the top right corner of Debug window
I've just spent an hour trying to get my console output back, and although this answer didn't solve it, it did help.
I'm on Intellij 11.1 Ultimate Edition, and Restore layout didn't help. Nor did I have any icons above the Watches window in the debugger, but I clicked around above the Watches anyway - and suddenly my console output was restored.
I've tried clicking around there again to see if I can provide more concrete steps, but without success. Can only suggest you keep clicking till it reappears.
I want to move back/forward between editor tabs, using the two additional ("virtual") mouse buttons I have (RAZER DEATHADDER BLACK).
In Eclipse it's possible by default.
In IDEA I go to File->Settings->Keymap->Main menu->Window->Editor Tabs.
There I have Select Next Tab with the deault Alt+Right shortcut.
Then I open the Add Mouse Shortcut.
In that dialog I try to assign the back button of my mouse but without success. It doesn't react at all.
Anyway, googling a bit I've found this thread. I quote Alexey Gopachenko which seems to be an employee of IntelliJ:
As stated above - we can't support buttons if JDK on your platform
does not support them - and obviously it does not.
Anyway, that is totally wrong. My platform does support these keys - I actually work with them, on the same platform, on Eclipse and any other app, so it's IDEA who ignores them.
I'd appriciate a solution - how do I assign these back/forward mouse buttons?
UPDATE #1
I've found out that IDEA uses its own JAVA distribution (C:\Program Files (x86)\JetBrains\IntelliJ IDEA 11.1.4\jre on Windows 7), instead of the system's one - WHY?!
I'm almost SURE that is the reason I cannot use extended mouse buttons.
I've tried to trick IDEA by creating a custom Windows shortcut. Didn't work. I've also tried to create a SYMLINK in windows to my other, system-wide JRE distribution. Didn't work as well.
If someone come up with an idea on how to make it work with the system's JRE instead of its own - I think that'd solve the issue.
UPDATE #2
The above update #1 is not the issue.
I also had the same problem under OS X El Capitan. I just tried to add a new Keyboard-Shortcut and pressed than the Button 4 on the mouse and this worked.
Back/Forward mouse shortcuts work fine for me with Razer Mamba mouse, for example Back action is assigned to Button4 Click and I can confirm that it is recognized in this dialog when I click on the Click Pad area:
If it doesn't work with your mouse for some reason, you can try to workaround the problem using the Razer Configurator macro or key assignments:
Use the assigned key in IDEA keymap settings instead of the mouse shortcut.
Note that Eclipse is SWT based while IDEA is Swing based, so mouse event management is completely different. If JDK cannot recognize your device button clicks, it will not work in any Java Swing applications (NetBeans, JEdit, etc). In some cases running IDEA under a more recent JDK version may help (if support for your device was added in the newer JDK release).
I'm experiencing the exact same thing suddenly.
I realized my most recent change was to start using idea64.exe rather than idea.exe.
I switched back, and my mouse buttons are working fine again.
So, while this is not a complete answer, it seems as if it has something to do with the 64-bit version.
If the Razer driver's button mapping feature doesn't allow different mappings for a particular program, you can just assign the buttons to the mouse button number choices (mouse button 4 / mouse button 5) and then install a third party app that does support mappings for particular programs, e.g. https://superuser.com/questions/562972/how-to-map-bind-mouse-button-as-keyboard-button-in-windows-7
This question helped me although I have a Logitech Marathon Mouse M705, so I thought that I would share the solution in case other Logitech owners was in search for this.
I have a similar problem with a Logitech mouse and idea64.exe
Fortunately their SetPoint software allows for program specific settings.
This setting will have to be deleted and then reconfigured whenever you update IntelliJ and get a new idea64.exe :-)
I am experiencing a very similar problem and wanted to share my findings. I just bought a new Logitech M705 mouse. Within intelli-j the scroll right and scroll left buttons do not work. The forward and backward buttons also do not work.
I typically run intelli-j as administrator because I need higher privileges to run various tomcat services. When logging in as that user (rather than right clicking and selecting run as admin) all the buttons work! Also, when running as my normal user all the buttons work.
Also very curious is that I have an older generation Logitech mouse (same model, M705). This mouse has no problems with the scroll buttons and forward-back.
My solution for now is to use intelli-j as the user I am logged in as.
Check out this little tutorial from BetterTouchTool here. Basically for some mice (like Logitech ones) using the settings application they come with you can map default button actions to clicks and in doing so set a button number and use it as normal.
This works for my Logitech Performance MX mouse.
You can add mouse shortcuts, just click on an action in keymap and add mouse shortcut.
Alternatively Ctrl+Tab brings up switcher, which may be less clicks to navigate.
I'm currently trying to workaround some apparent shortcomings of cocoa touch application tests in Xcode 4 (see this related question). Since failures of application tests are not highlighted in the editor window like failures of logic tests, I find myself using the mouse to scroll through the output window to see the results of failed tests.
I would prefer to use keyboard commands if possible to quickly look at the results of the tests and then quickly move back to the editor. Are there some keyboard shortcuts in Xcode 4 for maximizing and minimizing the output window?
It looks like Command+Shift+Y opens and closes the debug area, but I don't know of a keyboard shortcut to maximize it.
Here's a nice cheat sheet you can print out with lots of keyboard shortcuts.
I haven't found a direct shortcut, but along with Jose Ibanez shortcut, here are some relevant ones.
Cmd+0 Toggle left pane
Cmd+Alt+0 Toggle right pane
Cmd+Shift+Y Toggle bottom pane