I found similar case here, that I am using molecule to test my ansible roles, but for some reason it is skipping "creation" part and gives error like:
fatal: [rabbitmq]: UNREACHABLE! => {"changed": false, "msg": "Failed to create temporary directory.In some cases, you may have been able to authenticate and did not have permissions on the target directory. Consider changing the remote tmp path in ansible.cfg to a path rooted in \"/tmp\", for more error information use -vvv. Failed command was: ( umask 77 && mkdir -p \"` echo ~/.ansible/tmp `\"&& mkdir \"` echo ~/.ansible/tmp/ansible-tmp-1638541586.6239848-828-250053975102429 `\" && echo ansible-tmp-1638541586.6239848-828-250053975102429=\"` echo ~/.ansible/tmp/ansible-tmp-1638541586.6239848-828-250053975102429 `\" ), exited with result 1", "unreachable": true}
It is skipping the create process: Skipping, instances already created. However, nothing is running:
name#EEW00438:~/.cache$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
name#EEW00438:~/.cache$
what I tried:
molecule destroy
molecule reset
restart
rm -rf ~/.cache/
changed remote_tmp to /tmp/.ansible/ in /etc/ansible/ansible.cfg
reinstall molecule
This issue is only with one role.
UPDATE:
it is failing on step:
mkdir \"` echo ~/.ansible/tmp/ansible-tmp-1638782939.31706-2913-12516475286623 `\" && echo ansible-tmp-1638782939.31706-2913-12516475286623=
mkdir: cannot create directory ‘"/home/user/.ansible/tmp/ansible-tmp-1638782939.31706-2913-12516475286623"’: No such file or directory
I stumbled upon this issue as well.
When you create the role you need to create it as molecule init role --driver-name docker ns.myrole to enable docker. Be sure to install the docker driver too if you haven't pip install --upgrade molecule-docker
So if you need to tweak the container that runs, edit molecule.yml. It defaults to centos. I switched to ubuntu in there, an created a Dockerfile to provision the container with things that need to exist.
molecule.yml
---
dependency:
name: galaxy
driver:
name: docker
platforms:
- name: instance
image: ubuntu:22.04 # this is required but ignored since I specify a `dockerfile`
pre_build_image: false
dockerfile: Dockerfile
provisioner:
name: ansible
verifier:
name: ansible
For example, Ubuntu 22.04 doesn't use python anymore, so I added an alias at the end of what molecule renders so that Ansible can use python and have it redirect to python3
FROM ubuntu:22.04
RUN if [ $(command -v apt-get) ]; then export DEBIAN_FRONTEND=noninteractive && apt-get update && apt-get install -y python3 sudo bash ca-certificates iproute2 python3-apt aptitude && apt-get clean && rm -rf /var/lib/apt/lists/*; \
elif [ $(command -v dnf) ]; then dnf makecache && dnf --assumeyes install /usr/bin/python3 /usr/bin/python3-config /usr/bin/dnf-3 sudo bash iproute && dnf clean all; \
elif [ $(command -v yum) ]; then yum makecache fast && yum install -y /usr/bin/python /usr/bin/python2-config sudo yum-plugin-ovl bash iproute && sed -i 's/plugins=0/plugins=1/g' /etc/yum.conf && yum clean all; \
elif [ $(command -v zypper) ]; then zypper refresh && zypper install -y python3 sudo bash iproute2 && zypper clean -a; \
elif [ $(command -v apk) ]; then apk update && apk add --no-cache python3 sudo bash ca-certificates; \
elif [ $(command -v xbps-install) ]; then xbps-install -Syu && xbps-install -y python3 sudo bash ca-certificates iproute2 && xbps-remove -O; fi
RUN echo 'alias python=python3' >> ~/.bashrc
It's been years since I last used Molecule, and I must say... it's gone downhill. It used to be easy/clear/direct to get things working. Sigh. I guess I should stick to containers and force the migration off VMs sooner!
The problem may be caused by a Docker context change performed at the start of Docker Desktop. Despite this, Molecule does create a container, but in an inactive context.
At startup, Docker Desktop automatically switches the context from default to desktop-linux [1]. The active context determines which containers are available from CLI.
The context cannot be set in the molecule, i.e. the default context is always used to create containers [2].
$ molecule create --scenario-name test
... # The output with the error is skipped because it duplicates the output from the question
$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
$ docker context ls
NAME TYPE DESCRIPTION DOCKER ENDPOINT KUBERNETES ENDPOINT ORCHESTRATOR
default moby Current DOCKER_HOST based configuration unix:///var/run/docker.sock swarm
desktop-linux * moby unix:///home/bkarpov/.docker/desktop/docker.sock
$ docker context use default
$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
a71bfd28992f geerlingguy/docker-ubuntu2004-ansible "bash -c 'while true…" 5 minutes ago Up 5 minutes some-instance
$ molecule login --scenario-name test
INFO Running test > login
root#some-instance:/#
Solutions
Switch the context back to default manually
docker context use default
This solution is suitable for one-time execution, since the context will need to be switched every time Docker Desktop is started. Docker Desktop service will continue to work using the desktop-linux context.
Issue with the request to add context switching to Docker Desktop - https://github.com/docker/roadmap/issues/47
Stop Docker Desktop
systemctl --user stop docker-desktop
Stopping the Docker Desktop service will automatically switch to the default context.
Set DOCKER_CONTEXT so that Docker Desktop does not change the context in the current shell
export DOCKER_CONTEXT=default
systemctl --user restart docker-desktop
When stopping, the context returns to default, and when starting, it does not switch to desktop-linux.
References
https://docs.docker.com/desktop/install/ubuntu/#launch-docker-desktop
https://github.com/ansible-community/molecule-docker#faq
I want to create a Docker image for devs that reproduces our production servers. Those servers are configured by Ansible.
My idea is to run an ansible-pull to apply all the configuration inside the container. The problem is that I need the SSH key to pull the playbook, but I don't want to share the SSH key on the Docker image.
So, there is a way to have the SSH keys on build time without having them on run time?
Nice question. The simple way to do it is by removing the SSH keys after the Ansible stuff in the build - but because Docker stores images as layers, someone could still find the old layer with the keys in it.
If you build this Dockerfile:
FROM ubuntu
COPY ansible-ssh-key.rsa /key.rsa
RUN [ansible stuff]
RUN rm /key.rsa
The final image will have all your Ansible state and the SSH key will be gone but someone could easily run docker history to look at all the image layers, and just start a container from an intermediate layer before the key was deleted, and grab the key.
The trick would be to do something like this and then use Jason Wilder's docker-squash tool to squash the final image. In the squashed image the intermediate layer is gone and there's no way to get at the deleted key.
I'd setup some local file serving facility available only in your build environment.
E.g. start lighttpd on your build host to serve your pem-files only to local clients.
And in your Dockerfile do add/pull/cleanup in a single run:
RUN curl -sO http://build-host:8888/key.pem && ansible-pull -U myrepo && rm -rf key.pem
In this case it should be done in a single layer, so there should be no trace of key.pem left after layer commit.
This is another solution by using this repo, dockito/vault,
Secret store to be used on Docker image building.
I create a service dockito/vault and Ubuntu image where I attach my private key to the volume and run it as a process using,
docker run -it -v ~/.ssh:/vault/.ssh ubuntu /bin/bash -c "echo mysupersecret > /vault/.ssh/key"
docker run -d -p 14242:3000 -v ~/.ssh:/vault/.ssh dockito/vault
And, here is my Dockerfile
FROM ubuntu:14.04
RUN apt-get update -y && \
apt-get install -y curl && \
curl -L $(ip route|awk '/default/{print $3}'):14242/ONVAULT >
/usr/local
/bin/ONVAULT && \
chmod +x /usr/local/bin/ONVAULT
ENV REV_BREAK_CACHE=1
RUN ONVAULT echo ENV: && env && echo TOKEN ENV && echo $TOKEN
RUN ONVAULT ls -lha ~/.ssh/
RUN ONVAULT cat ~/.ssh/key
You can use the alpine linux to reduce final build size, and built the image as,
docker build -f Dockerfile -t mohan08p/VaultTest .
And, you are done. You can inspect the image. Secrets has not stored inside the image as its empty.
docker run -it mohan08p/VaultTest ls /root/.ssh
This is good technique to pass the .ssh at the build time. Only disadvantage is I need to keep additional Vault service running.
You could mount the SSH Keys into the Container on runtime.
docker run -v /path/to/ssh/key:/path/to/key/in/container image command
I have an app that executes various fun stuff with Git (like running git clone & git push) and I'm trying to docker-ize it.
I'm running into an issue though where I need to be able to add an SSH key to the container for the container 'user' to use.
I tried copying it into /root/.ssh/, changing $HOME, creating a git ssh wrapper, and still no luck.
Here is the Dockerfile for reference:
#DOCKER-VERSION 0.3.4
from ubuntu:12.04
RUN apt-get update
RUN apt-get install python-software-properties python g++ make git-core openssh-server -y
RUN add-apt-repository ppa:chris-lea/node.js
RUN echo "deb http://archive.ubuntu.com/ubuntu precise universe" >> /etc/apt/sources.list
RUN apt-get update
RUN apt-get install nodejs -y
ADD . /src
ADD ../../home/ubuntu/.ssh/id_rsa /root/.ssh/id_rsa
RUN cd /src; npm install
EXPOSE 808:808
CMD [ "node", "/src/app.js"]
app.js runs the git commands like git pull
It's a harder problem if you need to use SSH at build time. For example if you're using git clone, or in my case pip and npm to download from a private repository.
The solution I found is to add your keys using the --build-arg flag. Then you can use the new experimental --squash command (added 1.13) to merge the layers so that the keys are no longer available after removal. Here's my solution:
Build command
$ docker build -t example --build-arg ssh_prv_key="$(cat ~/.ssh/id_rsa)" --build-arg ssh_pub_key="$(cat ~/.ssh/id_rsa.pub)" --squash .
Dockerfile
FROM python:3.6-slim
ARG ssh_prv_key
ARG ssh_pub_key
RUN apt-get update && \
apt-get install -y \
git \
openssh-server \
libmysqlclient-dev
# Authorize SSH Host
RUN mkdir -p /root/.ssh && \
chmod 0700 /root/.ssh && \
ssh-keyscan github.com > /root/.ssh/known_hosts
# Add the keys and set permissions
RUN echo "$ssh_prv_key" > /root/.ssh/id_rsa && \
echo "$ssh_pub_key" > /root/.ssh/id_rsa.pub && \
chmod 600 /root/.ssh/id_rsa && \
chmod 600 /root/.ssh/id_rsa.pub
# Avoid cache purge by adding requirements first
ADD ./requirements.txt /app/requirements.txt
WORKDIR /app/
RUN pip install -r requirements.txt
# Remove SSH keys
RUN rm -rf /root/.ssh/
# Add the rest of the files
ADD . .
CMD python manage.py runserver
Update: If you're using Docker 1.13 and have experimental features on you can append --squash to the build command which will merge the layers, removing the SSH keys and hiding them from docker history.
Turns out when using Ubuntu, the ssh_config isn't correct. You need to add
RUN echo " IdentityFile ~/.ssh/id_rsa" >> /etc/ssh/ssh_config
to your Dockerfile in order to get it to recognize your ssh key.
Note: only use this approach for images that are private and will always be!
The ssh key remains stored within the image, even if you remove the key in a layer command after adding it (see comments in this post).
In my case this is ok, so this is what I am using:
# Setup for ssh onto github
RUN mkdir -p /root/.ssh
ADD id_rsa /root/.ssh/id_rsa
RUN chmod 700 /root/.ssh/id_rsa
RUN echo "Host github.com\n\tStrictHostKeyChecking no\n" >> /root/.ssh/config
If you are using Docker Compose an easy choice is to forward SSH agent like that:
something:
container_name: something
volumes:
- $SSH_AUTH_SOCK:/ssh-agent # Forward local machine SSH key to docker
environment:
SSH_AUTH_SOCK: /ssh-agent
or equivalently, if using docker run:
$ docker run --mount type=bind,source=$SSH_AUTH_SOCK,target=/ssh-agent \
--env SSH_AUTH_SOCK=/ssh-agent \
some-image
Expanding Peter Grainger's answer I was able to use multi-stage build available since Docker 17.05. Official page states:
With multi-stage builds, you use multiple FROM statements in your Dockerfile. Each FROM instruction can use a different base, and each of them begins a new stage of the build. You can selectively copy artifacts from one stage to another, leaving behind everything you don’t want in the final image.
Keeping this in mind here is my example of Dockerfile including three build stages. It's meant to create a production image of client web application.
# Stage 1: get sources from npm and git over ssh
FROM node:carbon AS sources
ARG SSH_KEY
ARG SSH_KEY_PASSPHRASE
RUN mkdir -p /root/.ssh && \
chmod 0700 /root/.ssh && \
ssh-keyscan bitbucket.org > /root/.ssh/known_hosts && \
echo "${SSH_KEY}" > /root/.ssh/id_rsa && \
chmod 600 /root/.ssh/id_rsa
WORKDIR /app/
COPY package*.json yarn.lock /app/
RUN eval `ssh-agent -s` && \
printf "${SSH_KEY_PASSPHRASE}\n" | ssh-add $HOME/.ssh/id_rsa && \
yarn --pure-lockfile --mutex file --network-concurrency 1 && \
rm -rf /root/.ssh/
# Stage 2: build minified production code
FROM node:carbon AS production
WORKDIR /app/
COPY --from=sources /app/ /app/
COPY . /app/
RUN yarn build:prod
# Stage 3: include only built production files and host them with Node Express server
FROM node:carbon
WORKDIR /app/
RUN yarn add express
COPY --from=production /app/dist/ /app/dist/
COPY server.js /app/
EXPOSE 33330
CMD ["node", "server.js"]
.dockerignore repeats contents of .gitignore file (it prevents node_modules and resulting dist directories of the project from being copied):
.idea
dist
node_modules
*.log
Command example to build an image:
$ docker build -t ezze/geoport:0.6.0 \
--build-arg SSH_KEY="$(cat ~/.ssh/id_rsa)" \
--build-arg SSH_KEY_PASSPHRASE="my_super_secret" \
./
If your private SSH key doesn't have a passphrase just specify empty SSH_KEY_PASSPHRASE argument.
This is how it works:
1). On the first stage only package.json, yarn.lock files and private SSH key are copied to the first intermediate image named sources. In order to avoid further SSH key passphrase prompts it is automatically added to ssh-agent. Finally yarn command installs all required dependencies from NPM and clones private git repositories from Bitbucket over SSH.
2). The second stage builds and minifies source code of web application and places it in dist directory of the next intermediate image named production. Note that source code of installed node_modules is copied from the image named sources produced on the first stage by this line:
COPY --from=sources /app/ /app/
Probably it also could be the following line:
COPY --from=sources /app/node_modules/ /app/node_modules/
We have only node_modules directory from the first intermediate image here, no SSH_KEY and SSH_KEY_PASSPHRASE arguments anymore. All the rest required for build is copied from our project directory.
3). On the third stage we reduce a size of the final image that will be tagged as ezze/geoport:0.6.0 by including only dist directory from the second intermediate image named production and installing Node Express for starting a web server.
Listing images gives an output like this:
REPOSITORY TAG IMAGE ID CREATED SIZE
ezze/geoport 0.6.0 8e8809c4e996 3 hours ago 717MB
<none> <none> 1f6518644324 3 hours ago 1.1GB
<none> <none> fa00f1182917 4 hours ago 1.63GB
node carbon b87c2ad8344d 4 weeks ago 676MB
where non-tagged images correpsond to the first and the second intermediate build stages.
If you run
$ docker history ezze/geoport:0.6.0 --no-trunc
you will not see any mentions of SSH_KEY and SSH_KEY_PASSPHRASE in the final image.
In order to inject you ssh key, within a container, you have multiple solutions:
Using a Dockerfile with the ADD instruction, you can inject it during your build process
Simply doing something like cat id_rsa | docker run -i <image> sh -c 'cat > /root/.ssh/id_rsa'
Using the docker cp command which allows you to inject files while a container is running.
This is now available since 18.09 release!
According to the documentation:
The docker build has a --ssh option to allow the Docker Engine to
forward SSH agent connections.
Here is an example of Dockerfile using SSH in the container:
# syntax=docker/dockerfile:experimental
FROM alpine
# Install ssh client and git
RUN apk add --no-cache openssh-client git
# Download public key for github.com
RUN mkdir -p -m 0600 ~/.ssh && ssh-keyscan github.com >> ~/.ssh/known_hosts
# Clone private repository
RUN --mount=type=ssh git clone git#github.com:myorg/myproject.git myproject
Once the Dockerfile is created, use the --ssh option for connectivity with the SSH agent:
$ docker build --ssh default .
Also, take a look at https://medium.com/#tonistiigi/build-secrets-and-ssh-forwarding-in-docker-18-09-ae8161d066
One cross-platform solution is to use a bind mount to share the host's .ssh folder to the container:
docker run -v /home/<host user>/.ssh:/home/<docker user>/.ssh <image>
Similar to agent forwarding this approach will make the public keys accessible to the container. An additional upside is that it works with a non-root user too and will get you connected to GitHub. One caveat to consider, however, is that all contents (including private keys) from the .ssh folder will be shared so this approach is only desirable for development and only for trusted container images.
Starting from docker API 1.39+ (Check API version with docker version) docker build allows the --ssh option with either an agent socket or keys to allow the Docker Engine to forward SSH agent connections.
Build Command
export DOCKER_BUILDKIT=1
docker build --ssh default=~/.ssh/id_rsa .
Dockerfile
# syntax=docker/dockerfile:experimental
FROM python:3.7
# Install ssh client (if required)
RUN apt-get update -qq
RUN apt-get install openssh-client -y
# Download public key for github.com
RUN --mount=type=ssh mkdir -p -m 0600 ~/.ssh && ssh-keyscan github.com >> ~/.ssh/known_hosts
# Clone private repository
RUN --mount=type=ssh git clone git#github.com:myorg/myproject.git myproject
More Info:
https://docs.docker.com/develop/develop-images/build_enhancements/#using-ssh-to-access-private-data-in-builds
https://github.com/moby/buildkit/blob/master/frontend/dockerfile/docs/experimental.md#run---mounttypessh
This line is a problem:
ADD ../../home/ubuntu/.ssh/id_rsa /root/.ssh/id_rsa
When specifying the files you want to copy into the image you can only use relative paths - relative to the directory where your Dockerfile is. So you should instead use:
ADD id_rsa /root/.ssh/id_rsa
And put the id_rsa file into the same directory where your Dockerfile is.
Check this out for more details: http://docs.docker.io/reference/builder/#add
Docker containers should be seen as 'services' of their own. To separate concerns you should separate functionalities:
1) Data should be in a data container: use a linked volume to clone the repo into. That data container can then be linked to the service needing it.
2) Use a container to run the git cloning task, (i.e it's only job is cloning) linking the data container to it when you run it.
3) Same for the ssh-key: put it is a volume (as suggested above) and link it to the git clone service when you need it
That way, both the cloning task and the key are ephemeral and only active when needed.
Now if your app itself is a git interface, you might want to consider github or bitbucket REST APIs directly to do your work: that's what they were designed for.
We had similar problem when doing npm install in docker build time.
Inspired from solution from Daniel van Flymen and combining it with git url rewrite, we found a bit simpler method for authenticating npm install from private github repos - we used oauth2 tokens instead of the keys.
In our case, the npm dependencies were specified as "git+https://github.com/..."
For authentication in container, the urls need to be rewritten to either be suitable for ssh authentication (ssh://git#github.com/) or token authentication (https://${GITHUB_TOKEN}#github.com/)
Build command:
docker build -t sometag --build-arg GITHUB_TOKEN=$GITHUB_TOKEN .
Unfortunately, I'm on docker 1.9, so --squash option is not there yet, eventually it needs to be added
Dockerfile:
FROM node:5.10.0
ARG GITHUB_TOKEN
#Install dependencies
COPY package.json ./
# add rewrite rule to authenticate github user
RUN git config --global url."https://${GITHUB_TOKEN}#github.com/".insteadOf "https://github.com/"
RUN npm install
# remove the secret token from the git config file, remember to use --squash option for docker build, when it becomes available in docker 1.13
RUN git config --global --unset url."https://${GITHUB_TOKEN}#github.com/".insteadOf
# Expose the ports that the app uses
EXPOSE 8000
#Copy server and client code
COPY server /server
COPY clients /clients
Forward the ssh authentication socket to the container:
docker run --rm -ti \
-v $SSH_AUTH_SOCK:/tmp/ssh_auth.sock \
-e SSH_AUTH_SOCK=/tmp/ssh_auth.sock \
-w /src \
my_image
Your script will be able to perform a git clone.
Extra: If you want cloned files to belong to a specific user you need to use chown since using other user than root inside the container will make git fail.
You can do this publishing to the container's environment some additional variables:
docker run ...
-e OWNER_USER=$(id -u) \
-e OWNER_GROUP=$(id -g) \
...
After you clone you must execute chown $OWNER_USER:$OWNER_GROUP -R <source_folder> to set the proper ownership before you leave the container so the files are accessible by a non-root user outside the container.
You can use multi stage build to build containers
This is the approach you can take :-
Stage 1 building an image with ssh
FROM ubuntu as sshImage
LABEL stage=sshImage
ARG SSH_PRIVATE_KEY
WORKDIR /root/temp
RUN apt-get update && \
apt-get install -y git npm
RUN mkdir /root/.ssh/ &&\
echo "${SSH_PRIVATE_KEY}" > /root/.ssh/id_rsa &&\
chmod 600 /root/.ssh/id_rsa &&\
touch /root/.ssh/known_hosts &&\
ssh-keyscan github.com >> /root/.ssh/known_hosts
COPY package*.json ./
RUN npm install
RUN cp -R node_modules prod_node_modules
Stage 2: build your container
FROM node:10-alpine
RUN mkdir -p /usr/app
WORKDIR /usr/app
COPY ./ ./
COPY --from=sshImage /root/temp/prod_node_modules ./node_modules
EXPOSE 3006
CMD ["npm", "run", "dev"]
add env attribute in your compose file:
environment:
- SSH_PRIVATE_KEY=${SSH_PRIVATE_KEY}
then pass args from build script like this:
docker-compose build --build-arg SSH_PRIVATE_KEY="$(cat ~/.ssh/id_rsa)"
And remove the intermediate container it for security.
This Will help you cheers.
I ran into the same problem today and little bit modified version with previous posts I found this approach more useful to me
docker run -it -v ~/.ssh/id_rsa:/root/.my-key:ro image /bin/bash
(Note that readonly flag so container will not mess my ssh key in any case.)
Inside container I can now run:
ssh-agent bash -c "ssh-add ~/.my-key; git clone <gitrepourl> <target>"
So I don't get that Bad owner or permissions on /root/.ssh/.. error which was noted by #kross
This issue is really an annoying one. Since you can't add/copy any file outside the dockerfile context, which means it's impossible to just link ~/.ssh/id_rsa into image's /root/.ssh/id_rsa, and when you definitely need a key to do some sshed thing like git clone from a private repo link..., during the building of your docker image.
Anyways, I found a solution to workaround, not so persuading but did work for me.
in your dockerfile:
add this file as /root/.ssh/id_rsa
do what you want, such as git clone, composer...
rm /root/.ssh/id_rsa at the end
a script to do in one shoot:
cp your key to the folder holding dockerfile
docker build
rm the copied key
anytime you have to run a container from this image with some ssh requirements, just add -v for the run command, like:
docker run -v ~/.ssh/id_rsa:/root/.ssh/id_rsa --name container image command
This solution results in no private key in both you project source and the built docker image, so no security issue to worry about anymore.
As eczajk already commented in Daniel van Flymen's answer it does not seem to be safe to remove the keys and use --squash, as they still will be visible in the history (docker history --no-trunc).
Instead with Docker 18.09, you can now use the "build secrets" feature. In my case I cloned a private git repo using my hosts SSH key with the following in my Dockerfile:
# syntax=docker/dockerfile:experimental
[...]
RUN --mount=type=ssh git clone [...]
[...]
To be able to use this, you need to enable the new BuildKit backend prior to running docker build:
export DOCKER_BUILDKIT=1
And you need to add the --ssh default parameter to docker build.
More info about this here: https://medium.com/#tonistiigi/build-secrets-and-ssh-forwarding-in-docker-18-09-ae8161d066
At first, some meta noise
There is a dangerously wrong advice in two highly upvoted answers here.
I commented, but since I have lost many days with this, please MIND:
Do not echo the private key into a file (meaning: echo "$ssh_prv_key" > /root/.ssh/id_ed25519). This will destroy the needed line format, at least in my case.
Use COPY or ADD instead. See Docker Load key “/root/.ssh/id_rsa”: invalid format for details.
This was also confirmed by another user:
I get Error loading key "/root/.ssh/id_ed25519": invalid format. Echo will
remove newlines/tack on double quotes for me. Is this only for ubuntu
or is there something different for alpine:3.10.3?
1. A working way that keeps the private key in the image (not so good!)
If the private key is stored in the image, you need to pay attention that you delete the public key from the git website, or that you do not publish the image. If you take care of this, this is secure. See below (2.) for a better way where you could also "forget to pay attention".
The Dockerfile looks as follows:
FROM ubuntu:latest
RUN apt-get update && apt-get install -y git
RUN mkdir -p /root/.ssh && chmod 700 /root/.ssh
COPY /.ssh/id_ed25519 /root/.ssh/id_ed25519
RUN chmod 600 /root/.ssh/id_ed25519 && \
apt-get -yqq install openssh-client && \
ssh-keyscan -t ed25519 -H gitlab.com >> /root/.ssh/known_hosts
RUN git clone git#gitlab.com:GITLAB_USERNAME/test.git
RUN rm -r /root/.ssh
2. A working way that does not keep the private key in the image (good!)
The following is the more secure way of the same thing, using "multi stage build" instead.
If you need an image that has the git repo directory without the private key stored in one of its layers, you need two images, and you only use the second in the end. That means, you need FROM two times, and you can then copy only the git repo directory from the first to the second image, see the official guide "Use multi-stage builds".
We use "alpine" as the smallest possible base image which uses apk instead of apt-get; you can also use apt-get with the above code instead using FROM ubuntu:latest.
The Dockerfile looks as follows:
# first image only to download the git repo
FROM alpine as MY_TMP_GIT_IMAGE
RUN apk add --no-cache git
RUN mkdir -p /root/.ssh && chmod 700 /root/.ssh
COPY /.ssh/id_ed25519 /root/.ssh/id_ed25519
RUN chmod 600 /root/.ssh/id_ed25519
RUN apk -yqq add --no-cache openssh-client && ssh-keyscan -t ed25519 -H gitlab.com >> /root/.ssh/known_hosts
RUN git clone git#gitlab.com:GITLAB_USERNAME/test.git
RUN rm -r /root/.ssh
# Start of the second image
FROM MY_BASE_IMAGE
COPY --from=MY_TMP_GIT_IMAGE /MY_GIT_REPO ./MY_GIT_REPO
We see here that FROM is just a namespace, it is like a header for the lines below it and can be addressed with an alias. Without an alias, --from=0 would be the first image (=FROM namespace).
You could now publish or share the second image, as the private key is not in its layers, and you would not necessarily need to remove the public key from the git website after one usage! Thus, you do not need to create a new key pair at every cloning of the repo. Of course, be aware that a passwordless private key is still insecure if someone might get a hand on your data in another way. If you are not sure about this, better remove the public key from the server after usage, and have a new key pair at every run.
A guide how to build the image from the Dockerfile
Install Docker Desktop; or use docker inside WSL2 or Linux in a VirtualBox; or use docker in a standalone Linux partition / hard drive.
Open a command prompt (PowerShell, terminal, ...).
Go to the directory of the Dockerfile.
Create a subfolder ".ssh/".
For security reasons, create a new public and private SSH key pair - even if you already have another one lying around - for each Dockerfile run. In the command prompt, in your Dockerfile's folder, enter (mind, this overwrites without asking):
Write-Output "y" | ssh-keygen -q -t ed25519 -f ./.ssh/id_ed25519 -N '""'
(if you use PowerShell) or
echo "y" | ssh-keygen -q -t ed25519 -f ./.ssh/id_ed25519 -N ''
(if you do not use PowerShell).
Your key pair will now be in the subfolder .ssh/. It is up to you whether you use that subfolder at all, you can also change the code to COPY id_ed25519 /root/.ssh/id_ed25519; then your private key needs to be in the Dockerfile's directory that you are in.
Open the public key in an editor, copy the content and publish it to your server (e.g. GitHub / GitLab --> profile --> SSH keys). You can choose whatever name and end date. The final readable comment of the public key string (normally your computer name if you did not add a -C comment in the parameters of ssh-keygen) is not important, just leave it there.
Start (Do not forget the "." at the end which is the build context):
docker build -t test .
Only for 1.):
After the run, remove the public key from the server (most important, and at best at once). The script removes the private key from the image, and you may also remove the private key from your local computer, since you should never use the key pair again. The reason: someone could get the private key from the image even if it was removed from the image. Quoting a user's comment:
If anyone gets a hold of your
image, they can retrieve the key... even if you delete that file in a
later layer, b/c they can go back to Step 7 when you added it
The attacker could wait with this private key until you use the key pair again.
Only for 2.):
After the run, since the second image is the only image remaining after a build, we do not necessarily need to remove the key pair from client and host. We still have a small risk that the passwordless private key is taken from a local computer somewhere. That is why you may still remove the public key from the git server. You may also remove any stored private keys. But it is probably not needed in many projects where the main aim is rather to automate building the image, and less the security.
At last, some more meta noise
As to the dangerously wrong advice in the two highly upvoted answers here that use the problematic echo-of-the-private-key approach, here are the votes at the time of writing:
https://stackoverflow.com/a/42125241/11154841 176 upvotes (top 1)
https://stackoverflow.com/a/48565025/11154841 55 upvotes (top 5)
While the question at 326k views, got a lot more: 376 upvotes
We see here that something must be wrong in the answers, as the top 1 answer votes are not at least on the level of the question votes.
There was just one small and unvoted comment at the end of the comment list of the top 1 answer naming the same echo-of-the-private-key problem (which is also quoted in this answer). And: that critical comment was made three years after the answer.
I have upvoted the top 1 answer myself. I only realised later that it would not work for me. Thus, swarm intelligence is working, but on a low flame? If anyone can explain to me why echoing the private key might work for others, but not for me, please comment. Else, 326k views (minus 2 comments ;) ) would have overseen or left aside the error of the top 1 answer. I would not write such a long text here if that echo-of-the-private-key code line would not have cost me many working days, with absolutely frustrating code picking from everything on the net.
'you can selectively let remote servers access your local ssh-agent as if it was running on the server'
https://developer.github.com/guides/using-ssh-agent-forwarding/
You can also link your .ssh directory between the host and the container, I don't know if this method has any security implications but it may be the easiest method. Something like this should work:
$ sudo docker run -it -v /root/.ssh:/root/.ssh someimage bash
Remember that docker runs with sudo (unless you don't), if this is the case you'll be using the root ssh keys.
A concise overview of the challenges of SSH inside Docker containers is detailed here. For connecting to trusted remotes from within a container without leaking secrets there are a few ways:
SSH agent forwarding (Linux-only, not straight-forward)
Inbuilt SSH with BuildKit (Experimental, not yet supported by Compose)
Using a bind mount to expose ~/.ssh to container. (Development only, potentially insecure)
Docker Secrets (Cross-platform, adds complexity)
Beyond these there's also the possibility of using a key-store running in a separate docker container accessible at runtime when using Compose. The drawback here is additional complexity due to the machinery required to create and manage a keystore such as Vault by HashiCorp.
For SSH key use in a stand-alone Docker container see the methods linked above and consider the drawbacks of each depending on your specific needs. If, however, you're running inside Compose and want to share a key to an app at runtime (reflecting practicalities of the OP) try this:
Create a docker-compose.env file and add it to your .gitignore file.
Update your docker-compose.yml and add env_file for service requiring the key.
Access public key from environment at application runtime, e.g. process.node.DEPLOYER_RSA_PUBKEY in the case of a Node.js application.
The above approach is ideal for development and testing and, while it could satisfy production requirements, in production you're better off using one of the other methods identified above.
Additional resources:
Docker Docs: Use bind mounts
Docker Docs: Manage sensitive data with Docker secrets
Stack Overflow: Using SSH keys inside docker container
Stack Overflow: Using ssh-agent with docker on macOS
If you don't care about the security of your SSH keys, there are many good answers here. If you do, the best answer I found was from a link in a comment above to this GitHub comment by diegocsandrim. So that others are more likely to see it, and just in case that repo ever goes away, here is an edited version of that answer:
Most solutions here end up leaving the private key in the image. This is bad, as anyone with access to the image has access to your private key. Since we don't know enough about the behavior of squash, this may still be the case even if you delete the key and squash that layer.
We generate a pre-sign URL to access the key with aws s3 cli, and limit the access for about 5 minutes, we save this pre-sign URL into a file in repo directory, then in dockerfile we add it to the image.
In dockerfile we have a RUN command that do all these steps: use the pre-sing URL to get the ssh key, run npm install, and remove the ssh key.
By doing this in one single command the ssh key would not be stored in any layer, but the pre-sign URL will be stored, and this is not a problem because the URL will not be valid after 5 minutes.
The build script looks like:
# build.sh
aws s3 presign s3://my_bucket/my_key --expires-in 300 > ./pre_sign_url
docker build -t my-service .
Dockerfile looks like this:
FROM node
COPY . .
RUN eval "$(ssh-agent -s)" && \
wget -i ./pre_sign_url -q -O - > ./my_key && \
chmod 700 ./my_key && \
ssh-add ./my_key && \
ssh -o StrictHostKeyChecking=no git#github.com || true && \
npm install --production && \
rm ./my_key && \
rm -rf ~/.ssh/*
ENTRYPOINT ["npm", "run"]
CMD ["start"]
A simple and secure way to achieve this without saving your key in a Docker image layer, or going through ssh_agent gymnastics is:
As one of the steps in your Dockerfile, create a .ssh directory by adding:
RUN mkdir -p /root/.ssh
Below that indicate that you would like to mount the ssh directory as a volume:
VOLUME [ "/root/.ssh" ]
Ensure that your container's ssh_config knows where to find the public keys by adding this line:
RUN echo " IdentityFile /root/.ssh/id_rsa" >> /etc/ssh/ssh_config
Expose you local user's .ssh directory to the container at runtime:
docker run -v ~/.ssh:/root/.ssh -it image_name
Or in your dockerCompose.yml add this under the service's volume key:
- "~/.ssh:/root/.ssh"
Your final Dockerfile should contain something like:
FROM node:6.9.1
RUN mkdir -p /root/.ssh
RUN echo " IdentityFile /root/.ssh/id_rsa" >> /etc/ssh/ssh_config
VOLUME [ "/root/.ssh" ]
EXPOSE 3000
CMD [ "launch" ]
I put together a very simple solution that works for my use case where I use a "builder" docker image to build an executable that gets deployed separately. In other words my "builder" image never leaves my local machine and only needs access to private repos/dependencies during the build phase.
You do not need to change your Dockerfile for this solution.
When you run your container, mount your ~/.ssh directory (this avoids having to bake the keys directly into the image, but rather ensures they're only available to a single container instance for a short period of time during the build phase). In my case I have several build scripts that automate my deployment.
Inside my build-and-package.sh script I run the container like this:
# do some script stuff before
...
docker run --rm \
-v ~/.ssh:/root/.ssh \
-v "$workspace":/workspace \
-w /workspace builder \
bash -cl "./scripts/build-init.sh $executable"
...
# do some script stuff after (i.e. pull the built executable out of the workspace, etc.)
The build-init.sh script looks like this:
#!/bin/bash
set -eu
executable=$1
# start the ssh agent
eval $(ssh-agent) > /dev/null
# add the ssh key (ssh key should not have a passphrase)
ssh-add /root/.ssh/id_rsa
# execute the build command
swift build --product $executable -c release
So instead of executing the swift build command (or whatever build command is relevant to your environment) directly in the docker run command, we instead execute the build-init.sh script which starts the ssh-agent, then adds our ssh key to the agent, and finally executes our swift build command.
Note 1: For this to work you'll need to make sure your ssh key does not have a passphrase, otherwise the ssh-add /root/.ssh/id_rsa line will ask for a passphrase and interrupt the build script.
Note 2: Make sure you have the proper file permissions set on your script files so that they can be run.
Hopefully this provides a simple solution for others with a similar use case.
In later versions of docker (17.05) you can use multi stage builds. Which is the safest option as the previous builds can only ever be used by the subsequent build and are then destroyed
See the answer to my stackoverflow question for more info
I'm trying to work the problem the other way: adding public ssh key to an image. But in my trials, I discovered that "docker cp" is for copying FROM a container to a host. Item 3 in the answer by creak seems to be saying you can use docker cp to inject files into a container. See https://docs.docker.com/engine/reference/commandline/cp/
excerpt
Copy files/folders from a container's filesystem to the host path.
Paths are relative to the root of the filesystem.
Usage: docker cp CONTAINER:PATH HOSTPATH
Copy files/folders from the PATH to the HOSTPATH
You can pass the authorised keys in to your container using a shared folder and set permissions using a docker file like this:
FROM ubuntu:16.04
RUN apt-get install -y openssh-server
RUN mkdir /var/run/sshd
EXPOSE 22
RUN cp /root/auth/id_rsa.pub /root/.ssh/authorized_keys
RUN rm -f /root/auth
RUN chmod 700 /root/.ssh
RUN chmod 400 /root/.ssh/authorized_keys
RUN chown root. /root/.ssh/authorized_keys
CMD /usr/sbin/sshd -D
And your docker run contains something like the following to share an auth directory on the host (holding the authorised_keys) with the container then open up the ssh port which will be accessable through port 7001 on the host.
-d -v /home/thatsme/dockerfiles/auth:/root/auth -–publish=127.0.0.1:7001:22
You may want to look at https://github.com/jpetazzo/nsenter which appears to be another way to open a shell on a container and execute commands within a container.
Late to the party admittedly, how about this which will make your host operating system keys available to root inside the container, on the fly:
docker run -v ~/.ssh:/mnt -it my_image /bin/bash -c "ln -s /mnt /root/.ssh; ssh user#10.20.30.40"
I'm not in favour of using Dockerfile to install keys since iterations of your container may leave private keys behind.
You can use secrets to manage any sensitive data which a container
needs at runtime but you don’t want to store in the image or in source
control, such as:
Usernames and passwords
TLS certificates and keys
SSH keys
Other important data such as the name of a database or internal server
Generic strings or binary content (up to 500 kb in size)
https://docs.docker.com/engine/swarm/secrets/
I was trying to figure out how to add signing keys to a container to use during runtime (not build) and came across this question. Docker secrets seem to be the solution for my use case, and since nobody has mentioned it yet I'll add it.
In my case I had a problem with nodejs and 'npm i' from a remote repository. I fixed it added 'node' user to nodejs container and 700 to ~/.ssh in container.
Dockerfile:
USER node #added the part
COPY run.sh /usr/local/bin/
CMD ["run.sh"]
run.sh:
#!/bin/bash
chmod 700 -R ~/.ssh/; #added the part
docker-compose.yml:
nodejs:
build: ./nodejs/10/
container_name: nodejs
restart: always
ports:
- "3000:3000"
volumes:
- ../www/:/var/www/html/:delegated
- ./ssh:/home/node/.ssh #added the part
links:
- mailhog
networks:
- work-network
after that it started works