Why can't I see values in the tensorflow object? I don't know what values are going in object and how to see them. Seeing values in objects will solve my problem. I am finding tensorflow difficult because you can't see what's going on inside objects.
I have tried tf.Print() but it is not working
How can I see "predict_op" value? I don't know what is inside it. It is really important for me to see the values.
predict_op = tf.argmax(Z3, 1) #Will return max value column index.
correct_prediction = tf.equal(predict_op, tf.argmax(Y, 1))
# Calculate accuracy on the test set
accuracy = tf.reduce_mean(tf.cast(correct_prediction, "float"))
train_accuracy = accuracy.eval({X: X_train, Y: Y_train})
test_accuracy = accuracy.eval({X: X_test, Y: Y_test})
print("Train Accuracy:", train_accuracy)
print("Test Accuracy:", test_accuracy)
Also if I run below code it gives error because I don't know what "tf.argmax(Y, 1)" is giving me.
con = tf.confusion_matrix(labels=tf.argmax(Y, 1),
predictions=tf.argmax(Z3, 1))
sess = tf.Session()
with sess.as_default():
print(sess.run(con))
In tensorflow, a tensor is, roughly, something that has a shape, a numerical representation in some curcumstances. Namely, a variable is a tensor and a tf.matmul produces a tensor, and a tf.placeholder is a tensor. All of them have a shape, but act drastically different when it comes to "what is a value of a tensor question?".
A variable once initialized always has a value - that is what we all are familiar with. A tensor like tf.matmul is an operation. Operations only describe what should be done with it's inputs. Operations only have value once you provide an input (or an input of an input, if op depends on another op). They are like functions, that descrive what to do, but you can never tell what is the ouput without providing an input. Placeholders, while still being a tensor, never have a value at all.
That said, if you, for example, want to debug a line tf.matmul(a, b) you must go on with running next code:
a_mul_b_op = tf.matmul(a, b)
a, b, a_mul_b = sess.run([a, b, a_mul_b_op], {x: input_x, y: input_y, etc: etc})
print(a, b, a_mul_b)
If you would like to read a value of variable (variables persist in memory in between calls to sess.run unlike operational tensors) you can go for either of next 2 ways that are equivalent:
print(var_conv42.eval())
print(sess.run([var_conv42]))
You probably need to go through the Introduction to TensorFlow article to understand how TensorFlow works. But here's a brief summary.
Define-by-run vs define-then-run
A TensorFlow program doesn't execute like a normal python script. A python scripts are define-by-run programs, meaning anything once defined you can change/see values. However TensorFlow programs are define-then-run. TensorFlow first builds a computational graph and then executes parts of/whole graph using a Session object. More info in the linke above.
Solving the problem with your code
If you want to see the value of predict_op you need to feed in the inputs/placeholders required to compute that particular tensor. For example say (I don't know how you are computing Z3 so I am assuming a simple computation),
X1 = tf.placeholder(…)
X2 = tf.placeholder(…)
Z3 = X1 + X2
predict_op = tf.argmax(Z3, 1)
Then you need to do the following to get the value of predict_op,
sess.run(predict_op, feed_dict={X1:<value>, X2:<value>})
I tried to implement the following code.
import tensorflow as tf
a = tf.placeholder(tf.int32)
b = tf.placeholder(tf.int32)
def initw(a,b):
tf.Variable(tf.sign(tf.random_uniform(shape=[a,b],minval=-1.0,maxval=1.0)))
bla = initw(a,b)
with tf.Session() as sess:
sess.run(tf.global_variables_initializer())
print(sess.run([bla], feed_dict={a:2, b:2}))
But I keep getting an error which states:
ValueError: initial_value must have a shape specified: Tensor("Sign:0",shape=(?, ?), dtype=float32)
Can someone tell me what I am doing wrong here? I really don't see what causes the error.
EDIT:
I want to use initw(a,b) to initialize the weights of a network. I want to be able to do something like:
weights = {
"h1": tf.get_variable("h1", initializer=initw(a,b).initialized_value())
}
Where a and b are the height and width of a matrix.
In my eyes the error message is actually quite precise. But I understand your confusion. You probably do not really understand how Tensorflow works under the hood. You might want to start reading here.
The shape of the computational graph must be known before runtime. There can only be one axis in every variable or placeholder which is unspecified at compile time, it is than later at runtime considered to be the batch dimension.
In your case you are trying to use placeholders to specify the dimensions of a variable, which is impossible because the graph can not be compiled this way.
I don't know what you are trying to do with this but I would guess there is a way to achieve what you need. You can actually use the length of the batch dimension dynamically to draw a uniform vector of that size.
Edit: After you updated the question I feel like I was right about my suspicion. There is no need for a and b to be placeholders, just make them Python variables, like this:
import tensorflow as tf
# Matrix shape must be known in advance, but can of course still be specified
# in some settings file or at the beginning of the python skript
A = 2
B = 2
W = tf.Variable(tf.sign(tf.random_uniform(shape=(A, B), minval=-1.0,
maxval=1.0)))
with tf.Session() as sess:
sess.run(tf.global_variables_initializer())
print(sess.run(W))
I want to run some optimization procedure in Tensorflow for a batch of examples, and I already have some raw estimation of these variables to optimize. So I want to initialize the variables with these estimated values, instead of some random numbers or zero.
So I wonder how can I make it? Please note here the initialization value is sample-dependent. My plan is to feed the initialization to some placeholder, then initialize the variable from this placeholder, but that doesn't work.
Define the operation update_estimates = tf.assign(variable,estimated_value), where estimated_value is a tf.placeholder that will contain your guess in the form of numpy arrays.
You then do a simple
sess.run(update_estimates, feed_dict={estimated_value:numpy_array}).
tf.get_variable() can be very useful, but for beginners I would advise against it.
I belive that this could be a good start for your problem:
import numpy as np
import tensorflow as tf
#This should be your raw estimation for the variables.
#Here I am using random numers as an example.
estimated_raw = np.random.uniform(-1,1,[2,3])
#This trainable variable will be initialized with estimated_raw
var = tf.get_variable('var', initializer=estimated_raw)
# Testing if everything is ok
with tf.Session() as sess:
var.initializer.run()
print(var.eval())
In this way you have initialized a variable with your estimation. The optimizer will take it further.
I'm a newbie to TensorFlow. I'm confused about the difference between tf.placeholder and tf.Variable. In my view, tf.placeholder is used for input data, and tf.Variable is used to store the state of data. This is all what I know.
Could someone explain to me more in detail about their differences? In particular, when to use tf.Variable and when to use tf.placeholder?
In short, you use tf.Variable for trainable variables such as weights (W) and biases (B) for your model.
weights = tf.Variable(
tf.truncated_normal([IMAGE_PIXELS, hidden1_units],
stddev=1.0 / math.sqrt(float(IMAGE_PIXELS))), name='weights')
biases = tf.Variable(tf.zeros([hidden1_units]), name='biases')
tf.placeholder is used to feed actual training examples.
images_placeholder = tf.placeholder(tf.float32, shape=(batch_size, IMAGE_PIXELS))
labels_placeholder = tf.placeholder(tf.int32, shape=(batch_size))
This is how you feed the training examples during the training:
for step in xrange(FLAGS.max_steps):
feed_dict = {
images_placeholder: images_feed,
labels_placeholder: labels_feed,
}
_, loss_value = sess.run([train_op, loss], feed_dict=feed_dict)
Your tf.variables will be trained (modified) as the result of this training.
See more at https://www.tensorflow.org/versions/r0.7/tutorials/mnist/tf/index.html. (Examples are taken from the web page.)
The difference is that with tf.Variable you have to provide an initial value when you declare it. With tf.placeholder you don't have to provide an initial value and you can specify it at run time with the feed_dict argument inside Session.run
Since Tensor computations compose of graphs then it's better to interpret the two in terms of graphs.
Take for example the simple linear regression
WX+B=Y
where W and B stand for the weights and bias and X for the observations' inputs and Y for the observations' outputs.
Obviously X and Y are of the same nature (manifest variables) which differ from that of W and B (latent variables). X and Y are values of the samples (observations) and hence need a place to be filled, while W and B are the weights and bias, Variables (the previous values affect the latter) in the graph which should be trained using different X and Y pairs. We place different samples to the Placeholders to train the Variables.
We only need to save or restore the Variables (at checkpoints) to save or rebuild the graph with the code.
Placeholders are mostly holders for the different datasets (for example training data or test data). However, Variables are trained in the training process for the specific tasks, i.e., to predict the outcome of the input or map the inputs to the desired labels. They remain the same until you retrain or fine-tune the model using different or the same samples to fill into the Placeholders often through the dict. For instance:
session.run(a_graph, dict = {a_placeholder_name : sample_values})
Placeholders are also passed as parameters to set models.
If you change placeholders (add, delete, change the shape etc) of a model in the middle of training, you can still reload the checkpoint without any other modifications. But if the variables of a saved model are changed, you should adjust the checkpoint accordingly to reload it and continue the training (all variables defined in the graph should be available in the checkpoint).
To sum up, if the values are from the samples (observations you already have) you safely make a placeholder to hold them, while if you need a parameter to be trained harness a Variable (simply put, set the Variables for the values you want to get using TF automatically).
In some interesting models, like a style transfer model, the input pixes are going to be optimized and the normally-called model variables are fixed, then we should make the input (usually initialized randomly) as a variable as implemented in that link.
For more information please infer to this simple and illustrating doc.
TL;DR
Variables
For parameters to learn
Values can be derived from training
Initial values are required (often random)
Placeholders
Allocated storage for data (such as for image pixel data during a feed)
Initial values are not required (but can be set, see tf.placeholder_with_default)
The most obvious difference between the tf.Variable and the tf.placeholder is that
you use variables to hold and update parameters. Variables are
in-memory buffers containing tensors. They must be explicitly
initialized and can be saved to disk during and after training. You
can later restore saved values to exercise or analyze the model.
Initialization of the variables is done with sess.run(tf.global_variables_initializer()). Also while creating a variable, you need to pass a Tensor as its initial value to the Variable() constructor and when you create a variable you always know its shape.
On the other hand, you can't update the placeholder. They also should not be initialized, but because they are a promise to have a tensor, you need to feed the value into them sess.run(<op>, {a: <some_val>}). And at last, in comparison to a variable, placeholder might not know the shape. You can either provide parts of the dimensions or provide nothing at all.
There other differences:
the values inside the variable can be updated during optimizations
variables can be shared, and can be non-trainable
the values inside the variable can be stored after training
when the variable is created, 3 ops are added to a graph (variable op, initializer op, ops for the initial value)
placeholder is a function, Variable is a class (hence an uppercase)
when you use TF in a distributed environment, variables are stored in a special place (parameter server) and are shared between the workers.
Interesting part is that not only placeholders can be fed. You can feed the value to a Variable and even to a constant.
Adding to other's answers, they also explain it very well in this MNIST tutorial on Tensoflow website:
We describe these interacting operations by manipulating symbolic
variables. Let's create one:
x = tf.placeholder(tf.float32, [None, 784]),
x isn't a specific value. It's a placeholder, a value that we'll input when we ask TensorFlow to
run a computation. We want to be able to input any number of MNIST
images, each flattened into a 784-dimensional vector. We represent
this as a 2-D tensor of floating-point numbers, with a shape [None,
784]. (Here None means that a dimension can be of any length.)
We also need the weights and biases for our model. We could imagine
treating these like additional inputs, but TensorFlow has an even
better way to handle it: Variable. A Variable is a modifiable tensor
that lives in TensorFlow's graph of interacting operations. It can be
used and even modified by the computation. For machine learning
applications, one generally has the model parameters be Variables.
W = tf.Variable(tf.zeros([784, 10]))
b = tf.Variable(tf.zeros([10]))
We create these Variables by giving tf.Variable the initial value of
the Variable: in this case, we initialize both W and b as tensors full
of zeros. Since we are going to learn W and b, it doesn't matter very
much what they initially are.
Tensorflow uses three types of containers to store/execute the process
Constants :Constants holds the typical data.
variables: Data values will be changed, with respective the functions such as cost_function..
placeholders: Training/Testing data will be passed in to the graph.
Example snippet:
import numpy as np
import tensorflow as tf
### Model parameters ###
W = tf.Variable([.3], tf.float32)
b = tf.Variable([-.3], tf.float32)
### Model input and output ###
x = tf.placeholder(tf.float32)
linear_model = W * x + b
y = tf.placeholder(tf.float32)
### loss ###
loss = tf.reduce_sum(tf.square(linear_model - y)) # sum of the squares
### optimizer ###
optimizer = tf.train.GradientDescentOptimizer(0.01)
train = optimizer.minimize(loss)
### training data ###
x_train = [1,2,3,4]
y_train = [0,-1,-2,-3]
### training loop ###
init = tf.global_variables_initializer()
sess = tf.Session()
sess.run(init) # reset values to wrong
for i in range(1000):
sess.run(train, {x:x_train, y:y_train})
As the name say placeholder is a promise to provide a value later i.e.
Variable are simply the training parameters (W(matrix), b(bias) same as the normal variables you use in your day to day programming, which the trainer updates/modify on each run/step.
While placeholder doesn't require any initial value, that when you created x and y TF doesn't allocated any memory, instead later when you feed the placeholders in the sess.run() using feed_dict, TensorFlow will allocate the appropriately sized memory for them (x and y) - this unconstrained-ness allows us to feed any size and shape of data.
In nutshell:
Variable - is a parameter you want trainer (i.e. GradientDescentOptimizer) to update after each step.
Placeholder demo -
a = tf.placeholder(tf.float32)
b = tf.placeholder(tf.float32)
adder_node = a + b # + provides a shortcut for tf.add(a, b)
Execution:
print(sess.run(adder_node, {a: 3, b:4.5}))
print(sess.run(adder_node, {a: [1,3], b: [2, 4]}))
resulting in the output
7.5
[ 3. 7.]
In the first case 3 and 4.5 will be passed to a and b respectively, and then to adder_node ouputting 7. In second case there's a feed list, first step 1 and 2 will be added, next 3 and 4 (a and b).
Relevant reads:
tf.placeholder doc.
tf.Variable doc.
Variable VS placeholder.
Variables
A TensorFlow variable is the best way to represent shared, persistent state manipulated by your program. Variables are manipulated via the tf.Variable class. Internally, a tf.Variable stores a persistent tensor. Specific operations allow you to read and modify the values of this tensor. These modifications are visible across multiple tf.Sessions, so multiple workers can see the same values for a tf.Variable. Variables must be initialized before using.
Example:
x = tf.Variable(3, name="x")
y = tf.Variable(4, name="y")
f = x*x*y + y + 2
This creates a computation graph. The variables (x and y) can be initialized and the function (f) evaluated in a tensorflow session as follows:
with tf.Session() as sess:
x.initializer.run()
y.initializer.run()
result = f.eval()
print(result)
42
Placeholders
A placeholder is a node (same as a variable) whose value can be initialized in the future. These nodes basically output the value assigned to them during runtime. A placeholder node can be assigned using the tf.placeholder() class to which you can provide arguments such as type of the variable and/or its shape. Placeholders are extensively used for representing the training dataset in a machine learning model as the training dataset keeps changing.
Example:
A = tf.placeholder(tf.float32, shape=(None, 3))
B = A + 5
Note: 'None' for a dimension means 'any size'.
with tf.Session as sess:
B_val_1 = B.eval(feed_dict={A: [[1, 2, 3]]})
B_val_2 = B.eval(feed_dict={A: [[4, 5, 6], [7, 8, 9]]})
print(B_val_1)
[[6. 7. 8.]]
print(B_val_2)
[[9. 10. 11.]
[12. 13. 14.]]
References:
https://www.tensorflow.org/guide/variables
https://www.tensorflow.org/api_docs/python/tf/placeholder
O'Reilly: Hands-On Machine Learning with Scikit-Learn & Tensorflow
Think of Variable in tensorflow as a normal variables which we use in programming languages. We initialize variables, we can modify it later as well. Whereas placeholder doesn’t require initial value. Placeholder simply allocates block of memory for future use. Later, we can use feed_dict to feed the data into placeholder. By default, placeholder has an unconstrained shape, which allows you to feed tensors of different shapes in a session. You can make constrained shape by passing optional argument -shape, as I have done below.
x = tf.placeholder(tf.float32,(3,4))
y = x + 2
sess = tf.Session()
print(sess.run(y)) # will cause an error
s = np.random.rand(3,4)
print(sess.run(y, feed_dict={x:s}))
While doing Machine Learning task, most of the time we are unaware of number of rows but (let’s assume) we do know the number of features or columns. In that case, we can use None.
x = tf.placeholder(tf.float32, shape=(None,4))
Now, at run time we can feed any matrix with 4 columns and any number of rows.
Also, Placeholders are used for input data ( they are kind of variables which we use to feed our model), where as Variables are parameters such as weights that we train over time.
Placeholder :
A placeholder is simply a variable that we will assign data to at a later date. It allows us to create our operations and build our computation graph, without needing the data. In TensorFlow terminology, we then feed data into the graph through these placeholders.
Initial values are not required but can have default values with tf.placeholder_with_default)
We have to provide value at runtime like :
a = tf.placeholder(tf.int16) // initialize placeholder value
b = tf.placeholder(tf.int16) // initialize placeholder value
use it using session like :
sess.run(add, feed_dict={a: 2, b: 3}) // this value we have to assign at runtime
Variable :
A TensorFlow variable is the best way to represent shared,
persistent state manipulated by your program.
Variables are manipulated via the tf.Variable class. A tf.Variable
represents a tensor whose value can be changed by running ops on it.
Example : tf.Variable("Welcome to tensorflow!!!")
Tensorflow 2.0 Compatible Answer: The concept of Placeholders, tf.placeholder will not be available in Tensorflow 2.x (>= 2.0) by default, as the Default Execution Mode is Eager Execution.
However, we can use them if used in Graph Mode (Disable Eager Execution).
Equivalent command for TF Placeholder in version 2.x is tf.compat.v1.placeholder.
Equivalent Command for TF Variable in version 2.x is tf.Variable and if you want to migrate the code from 1.x to 2.x, the equivalent command is
tf.compat.v2.Variable.
Please refer this Tensorflow Page for more information about Tensorflow Version 2.0.
Please refer the Migration Guide for more information about migration from versions 1.x to 2.x.
Think of a computation graph. In such graph, we need an input node to pass our data to the graph, those nodes should be defined as Placeholder in tensorflow.
Do not think as a general program in Python. You can write a Python program and do all those stuff that guys explained in other answers just by Variables, but for computation graphs in tensorflow, to feed your data to the graph, you need to define those nods as Placeholders.
For TF V1:
Constant is with initial value and it won't change in the computation;
Variable is with initial value and it can change in the computation; (so good for parameters)
Placeholder is without initial value and it won't change in the computation. (so good for inputs like prediction instances)
For TF V2, same but they try to hide Placeholder (graph mode is not preferred).
In TensorFlow, a variable is just another tensor (like tf.constant or tf.placeholder). It just so happens that variables can be modified by the computation. tf.placeholder is used for inputs that will be provided externally to the computation at run-time (e.g. training data). tf.Variable is used for inputs that are part of the computation and are going to be modified by the computation (e.g. weights of a neural network).