f(n):
s = 1
m = n
while m >= 1:
for j in 1,2,3, .., m:
s = s + 1
m = m / 2
My attempt
How many times does the statement s = s + 1 run? Well, let's try a number or two for n and see what we get.
n = 32
m = n = 32
m = 32 => inner for loop, loops 32 times
m = 16 => -.- 16 times
m = 8 => -.- 8 times
m = 4 => -.- 4 times
m = 2 => -.- 2 times
m = 1 => -.- 1 time
In total 16+8+4+2+1 = 31 times for n = 32
Doing the same for n = 8 gives 15 times
Doing the same for n = 4 gives 7 times
Doing the same for n = 64 gives 127 times
Notice how it always seemingly is 2 * n - 1, I believe this to be no coincidence because what we're really observing is that the total amount of times the statement gets executed is equal to the geometric sum sum of 2^k from k=0 to k=log(n) which has a closed form solution 2n + 1 given that we're using base 2 logarithm.
As such, my guess is that the complexity is O(n).
Is this correct?
Well what you just observed is true indeed. We can prove it mathematically as well.
Inner loop execution for first iteration -> n
Inner loop execution for second iteration -> n/2
Inner loop execution for third iteration -> n/(2^2)
and so on....
Therfore total time is (n + (n/2) + (n/(2^2)) + ... + (n/(2^k))) where n/(2^k) should be equal to 1 which implies k = log(n). Taking n common from all terms will give us a GP And now using GP formulae in above series , total time will come out to be 1(1 - ((1/2)^k)) / (1 - 1/2). putting value of k = log(n), we will get total time as 2*(n-1).
Note -:
This gives us time complexity of O(n).
log is of base 2.
My professor posed the following question and I really don't know how to start solving this problem. Any help is really welcomed.
Let the space of the tree be a tree with a uniform branching b (each node has exactly b children). We are exploring the space with iterative deepening, starting with the root of the tree. The program finds the first solution at a depth of 3, in 0.2 seconds, and the next solution at a depth of 5 in 10 seconds. We know that the third solution is at depth 9. Estimate approximately how much time we can expect the program to need in order to find the third solution.
Remember school math and sum of geometric progression.
Tree looks like (example for b=3 children)
N
N N N
N N N N N N N N N
Number of nodes at K top levels is (1 + b + b^2 + b^3... + b^(k-1))
S(k) = (b^k - 1) / (b - 1)
We can see for k=3 and k=5
S(5) / S(3) = 10 / 0.2
(b^5 - 1) / (b^3 - 1) = 10 / 0.2 = 50
Approximation (neglecting -1 term for not so small powers)
b^5 / b^3 = b^2 ~ 50
To find result for k=9
b^9 / b^5 = b^4 ~ 2500
So time is 10*2500 = 25000 seconds ~ 7 hours
Why because of the i=i*2 is the runtime of the loop below considered O(logN)?
for (int i = 1; i <= N;) {
code with O(1);
i = i * 2;
}
Look at 1024 = 210. How many times do you have to double the number 1 to get 1024?
Times 1 2 3 4 5 6 7 8 9 10
Result 2 4 8 16 32 64 128 256 512 1024
So you would have to run your doubling loop ten times to get 210 And in general, you have to run your doubling loop n times to get 2n. But what is n? It's the log2 2n, so in general if n is some power of 2, the loop has to run log2n times to reach it.
To have the algorithm in O(logN), for any N it would need (around) log N steps. In the example of N=32 (where log 32 = 5) this can be seen:
i = 1 (start)
i = 2
i = 4
i = 8
i = 16
i = 32 (5 iterations)
i = 64 (abort after 6 iterations)
In general, after x iterations, i=2^x holds. To reach i>N you need x = log N + 1.
PS: When talking about complexities, the log base (2, 10, e, ...) is not relevant. Furthermore, it is not relevant if you have i <= N or i < N as this only changes the number of iterations by one.
You can prove it pretty simply.
Claim:
For the tth (0 base) iteration, i=2^t
Proof, by induction.
Base: 2^0 = 1, and indeed in the first iteration, i=1.
Step: For some t+1, the value of i is 2*i(t) (where i(t) is the value of i in the t iteration). From Induction Hypothesis we know that i(t)=2^t, and thus i(t+1) = 2*i(t) = 2*2^t = 2^(t+1), and the claim holds.
Now, let's examine our stop criteria. We iterate the loop while i <= N, and from the above claim, that means we iterate while 2^t <= N. By Doing log_2 on both sides, we get log_2(2^t) <= log_2(N), and since log_2(2^t) = t, we get that we iterate while t <= log_2(N) - so we iterate Theta(log_2(N)) times. (And that concludes the proof).
i starts in 1. In each iteration you multiply i by 2, so in the K-th iteration, i will be 2K-1.
After a number K of iterations, 2K-1 will be bigger than (or to) N.
this means N ≤ 2K-1
this means log2(N) ≤ K-1
K-1 will be the number of iterations your loop will run, and since K-1 is greater or equal to log(N), your algorithm is logarithmic.
I understand Big-O notation, but I don't know how to calculate it for many functions. In particular, I've been trying to figure out the computational complexity of the naive version of the Fibonacci sequence:
int Fibonacci(int n)
{
if (n <= 1)
return n;
else
return Fibonacci(n - 1) + Fibonacci(n - 2);
}
What is the computational complexity of the Fibonacci sequence and how is it calculated?
You model the time function to calculate Fib(n) as sum of time to calculate Fib(n-1) plus the time to calculate Fib(n-2) plus the time to add them together (O(1)). This is assuming that repeated evaluations of the same Fib(n) take the same time - i.e. no memoization is used.
T(n<=1) = O(1)
T(n) = T(n-1) + T(n-2) + O(1)
You solve this recurrence relation (using generating functions, for instance) and you'll end up with the answer.
Alternatively, you can draw the recursion tree, which will have depth n and intuitively figure out that this function is asymptotically O(2n). You can then prove your conjecture by induction.
Base: n = 1 is obvious
Assume T(n-1) = O(2n-1), therefore
T(n) = T(n-1) + T(n-2) + O(1) which is equal to
T(n) = O(2n-1) + O(2n-2) + O(1) = O(2n)
However, as noted in a comment, this is not the tight bound. An interesting fact about this function is that the T(n) is asymptotically the same as the value of Fib(n) since both are defined as
f(n) = f(n-1) + f(n-2).
The leaves of the recursion tree will always return 1. The value of Fib(n) is sum of all values returned by the leaves in the recursion tree which is equal to the count of leaves. Since each leaf will take O(1) to compute, T(n) is equal to Fib(n) x O(1). Consequently, the tight bound for this function is the Fibonacci sequence itself (~θ(1.6n)). You can find out this tight bound by using generating functions as I'd mentioned above.
Just ask yourself how many statements need to execute for F(n) to complete.
For F(1), the answer is 1 (the first part of the conditional).
For F(n), the answer is F(n-1) + F(n-2).
So what function satisfies these rules? Try an (a > 1):
an == a(n-1) + a(n-2)
Divide through by a(n-2):
a2 == a + 1
Solve for a and you get (1+sqrt(5))/2 = 1.6180339887, otherwise known as the golden ratio.
So it takes exponential time.
I agree with pgaur and rickerbh, recursive-fibonacci's complexity is O(2^n).
I came to the same conclusion by a rather simplistic but I believe still valid reasoning.
First, it's all about figuring out how many times recursive fibonacci function ( F() from now on ) gets called when calculating the Nth fibonacci number. If it gets called once per number in the sequence 0 to n, then we have O(n), if it gets called n times for each number, then we get O(n*n), or O(n^2), and so on.
So, when F() is called for a number n, the number of times F() is called for a given number between 0 and n-1 grows as we approach 0.
As a first impression, it seems to me that if we put it in a visual way, drawing a unit per time F() is called for a given number, wet get a sort of pyramid shape (that is, if we center units horizontally). Something like this:
n *
n-1 **
n-2 ****
...
2 ***********
1 ******************
0 ***************************
Now, the question is, how fast is the base of this pyramid enlarging as n grows?
Let's take a real case, for instance F(6)
F(6) * <-- only once
F(5) * <-- only once too
F(4) **
F(3) ****
F(2) ********
F(1) **************** <-- 16
F(0) ******************************** <-- 32
We see F(0) gets called 32 times, which is 2^5, which for this sample case is 2^(n-1).
Now, we want to know how many times F(x) gets called at all, and we can see the number of times F(0) is called is only a part of that.
If we mentally move all the *'s from F(6) to F(2) lines into F(1) line, we see that F(1) and F(0) lines are now equal in length. Which means, total times F() gets called when n=6 is 2x32=64=2^6.
Now, in terms of complexity:
O( F(6) ) = O(2^6)
O( F(n) ) = O(2^n)
There's a very nice discussion of this specific problem over at MIT. On page 5, they make the point that, if you assume that an addition takes one computational unit, the time required to compute Fib(N) is very closely related to the result of Fib(N).
As a result, you can skip directly to the very close approximation of the Fibonacci series:
Fib(N) = (1/sqrt(5)) * 1.618^(N+1) (approximately)
and say, therefore, that the worst case performance of the naive algorithm is
O((1/sqrt(5)) * 1.618^(N+1)) = O(1.618^(N+1))
PS: There is a discussion of the closed form expression of the Nth Fibonacci number over at Wikipedia if you'd like more information.
You can expand it and have a visulization
T(n) = T(n-1) + T(n-2) <
T(n-1) + T(n-1)
= 2*T(n-1)
= 2*2*T(n-2)
= 2*2*2*T(n-3)
....
= 2^i*T(n-i)
...
==> O(2^n)
Recursive algorithm's time complexity can be better estimated by drawing recursion tree, In this case the recurrence relation for drawing recursion tree would be T(n)=T(n-1)+T(n-2)+O(1)
note that each step takes O(1) meaning constant time,since it does only one comparison to check value of n in if block.Recursion tree would look like
n
(n-1) (n-2)
(n-2)(n-3) (n-3)(n-4) ...so on
Here lets say each level of above tree is denoted by i
hence,
i
0 n
1 (n-1) (n-2)
2 (n-2) (n-3) (n-3) (n-4)
3 (n-3)(n-4) (n-4)(n-5) (n-4)(n-5) (n-5)(n-6)
lets say at particular value of i, the tree ends, that case would be when n-i=1, hence i=n-1, meaning that the height of the tree is n-1.
Now lets see how much work is done for each of n layers in tree.Note that each step takes O(1) time as stated in recurrence relation.
2^0=1 n
2^1=2 (n-1) (n-2)
2^2=4 (n-2) (n-3) (n-3) (n-4)
2^3=8 (n-3)(n-4) (n-4)(n-5) (n-4)(n-5) (n-5)(n-6) ..so on
2^i for ith level
since i=n-1 is height of the tree work done at each level will be
i work
1 2^1
2 2^2
3 2^3..so on
Hence total work done will sum of work done at each level, hence it will be 2^0+2^1+2^2+2^3...+2^(n-1) since i=n-1.
By geometric series this sum is 2^n, Hence total time complexity here is O(2^n)
The proof answers are good, but I always have to do a few iterations by hand to really convince myself. So I drew out a small calling tree on my whiteboard, and started counting the nodes. I split my counts out into total nodes, leaf nodes, and interior nodes. Here's what I got:
IN | OUT | TOT | LEAF | INT
1 | 1 | 1 | 1 | 0
2 | 1 | 1 | 1 | 0
3 | 2 | 3 | 2 | 1
4 | 3 | 5 | 3 | 2
5 | 5 | 9 | 5 | 4
6 | 8 | 15 | 8 | 7
7 | 13 | 25 | 13 | 12
8 | 21 | 41 | 21 | 20
9 | 34 | 67 | 34 | 33
10 | 55 | 109 | 55 | 54
What immediately leaps out is that the number of leaf nodes is fib(n). What took a few more iterations to notice is that the number of interior nodes is fib(n) - 1. Therefore the total number of nodes is 2 * fib(n) - 1.
Since you drop the coefficients when classifying computational complexity, the final answer is θ(fib(n)).
It is bounded on the lower end by 2^(n/2) and on the upper end by 2^n (as noted in other comments). And an interesting fact of that recursive implementation is that it has a tight asymptotic bound of Fib(n) itself. These facts can be summarized:
T(n) = Ω(2^(n/2)) (lower bound)
T(n) = O(2^n) (upper bound)
T(n) = Θ(Fib(n)) (tight bound)
The tight bound can be reduced further using its closed form if you like.
It is simple to calculate by diagramming function calls. Simply add the function calls for each value of n and look at how the number grows.
The Big O is O(Z^n) where Z is the golden ratio or about 1.62.
Both the Leonardo numbers and the Fibonacci numbers approach this ratio as we increase n.
Unlike other Big O questions there is no variability in the input and both the algorithm and implementation of the algorithm are clearly defined.
There is no need for a bunch of complex math. Simply diagram out the function calls below and fit a function to the numbers.
Or if you are familiar with the golden ratio you will recognize it as such.
This answer is more correct than the accepted answer which claims that it will approach f(n) = 2^n. It never will. It will approach f(n) = golden_ratio^n.
2 (2 -> 1, 0)
4 (3 -> 2, 1) (2 -> 1, 0)
8 (4 -> 3, 2) (3 -> 2, 1) (2 -> 1, 0)
(2 -> 1, 0)
14 (5 -> 4, 3) (4 -> 3, 2) (3 -> 2, 1) (2 -> 1, 0)
(2 -> 1, 0)
(3 -> 2, 1) (2 -> 1, 0)
22 (6 -> 5, 4)
(5 -> 4, 3) (4 -> 3, 2) (3 -> 2, 1) (2 -> 1, 0)
(2 -> 1, 0)
(3 -> 2, 1) (2 -> 1, 0)
(4 -> 3, 2) (3 -> 2, 1) (2 -> 1, 0)
(2 -> 1, 0)
The naive recursion version of Fibonacci is exponential by design due to repetition in the computation:
At the root you are computing:
F(n) depends on F(n-1) and F(n-2)
F(n-1) depends on F(n-2) again and F(n-3)
F(n-2) depends on F(n-3) again and F(n-4)
then you are having at each level 2 recursive calls that are wasting a lot of data in the calculation, the time function will look like this:
T(n) = T(n-1) + T(n-2) + C, with C constant
T(n-1) = T(n-2) + T(n-3) > T(n-2) then
T(n) > 2*T(n-2)
...
T(n) > 2^(n/2) * T(1) = O(2^(n/2))
This is just a lower bound that for the purpose of your analysis should be enough but the real time function is a factor of a constant by the same Fibonacci formula and the closed form is known to be exponential of the golden ratio.
In addition, you can find optimized versions of Fibonacci using dynamic programming like this:
static int fib(int n)
{
/* memory */
int f[] = new int[n+1];
int i;
/* Init */
f[0] = 0;
f[1] = 1;
/* Fill */
for (i = 2; i <= n; i++)
{
f[i] = f[i-1] + f[i-2];
}
return f[n];
}
That is optimized and do only n steps but is also exponential.
Cost functions are defined from Input size to the number of steps to solve the problem. When you see the dynamic version of Fibonacci (n steps to compute the table) or the easiest algorithm to know if a number is prime (sqrt(n) to analyze the valid divisors of the number). you may think that these algorithms are O(n) or O(sqrt(n)) but this is simply not true for the following reason:
The input to your algorithm is a number: n, using the binary notation the input size for an integer n is log2(n) then doing a variable change of
m = log2(n) // your real input size
let find out the number of steps as a function of the input size
m = log2(n)
2^m = 2^log2(n) = n
then the cost of your algorithm as a function of the input size is:
T(m) = n steps = 2^m steps
and this is why the cost is an exponential.
Well, according to me to it is O(2^n) as in this function only recursion is taking the considerable time (divide and conquer). We see that, the above function will continue in a tree until the leaves are approaches when we reach to the level F(n-(n-1)) i.e. F(1). So, here when we jot down the time complexity encountered at each depth of tree, the summation series is:
1+2+4+.......(n-1)
= 1((2^n)-1)/(2-1)
=2^n -1
that is order of 2^n [ O(2^n) ].
No answer emphasizes probably the fastest and most memory efficient way to calculate the sequence. There is a closed form exact expression for the Fibonacci sequence. It can be found by using generating functions or by using linear algebra as I will now do.
Let f_1,f_2, ... be the Fibonacci sequence with f_1 = f_2 = 1. Now consider a sequence of two dimensional vectors
f_1 , f_2 , f_3 , ...
f_2 , f_3 , f_4 , ...
Observe that the next element v_{n+1} in the vector sequence is M.v_{n} where M is a 2x2 matrix given by
M = [0 1]
[1 1]
due to f_{n+1} = f_{n+1} and f_{n+2} = f_{n} + f_{n+1}
M is diagonalizable over complex numbers (in fact diagonalizable over the reals as well, but this is not usually the case). There are two distinct eigenvectors of M given by
1 1
x_1 x_2
where x_1 = (1+sqrt(5))/2 and x_2 = (1-sqrt(5))/2 are the distinct solutions to the polynomial equation x*x-x-1 = 0. The corresponding eigenvalues are x_1 and x_2. Think of M as a linear transformation and change your basis to see that it is equivalent to
D = [x_1 0]
[0 x_2]
In order to find f_n find v_n and look at the first coordinate. To find v_n apply M n-1 times to v_1. But applying M n-1 times is easy, just think of it as D. Then using linearity one can find
f_n = 1/sqrt(5)*(x_1^n-x_2^n)
Since the norm of x_2 is smaller than 1, the corresponding term vanishes as n tends to infinity; therefore, obtaining the greatest integer smaller than (x_1^n)/sqrt(5) is enough to find the answer exactly. By making use of the trick of repeatedly squaring, this can be done using only O(log_2(n)) multiplication (and addition) operations. Memory complexity is even more impressive because it can be implemented in a way that you always need to hold at most 1 number in memory whose value is smaller than the answer. However, since this number is not a natural number, memory complexity here changes depending on whether if you use fixed bits to represent each number (hence do calculations with error)(O(1) memory complexity this case) or use a better model like Turing machines, in which case some more analysis is needed.