I have a list report that uses the event block AT LINE SELECTION (and HIDE).
AT LINE-SELECTION.
WRITE: 'Testline'.
* and some more things
When I double click on a line in the main list, AT LINE SELECTION is processed, and the main list is replaced with a list that consists of the text 'Testline'.
When I klick on the green back button, the main list is shown again.
Everything works as espected.
Now to my question:
Is there some way how the report can be notified when the user clicks on the green back button to go from the detail list to the main list?
The obvious solution AT USER-COMMAND is not called.
This is the event where I want to SUBMIT the same report again to update the list.
(I know I could do this with an ALV report, but is this possible with a simple list report?)
When you check the documentation you will find the following information:
The function codes PICK and PF## ("##" stands for 01 to 24) do not cause the event AT USER-COMMAND, but the events AT LINE-SELECTION and AT PF##.
All function codes that start with the character "%" are interpreted as system functions and do not cause the event AT USER-COMMAND. The system functions for lists are listed in the following table 1.
The function codes in the following table 2, likewise, do not cause the event AT USER-COMMAND, but are handled by the list processor.
table 2 includes BACK (that's the default code for the green arrow).
What you can do: Write your own status.
REPORT ytest.
DATA pf_exclude TYPE TABLE OF sy-ucomm WITH HEADER LINE.
START-OF-SELECTION.
SET PF-STATUS 'LIST'. "<--- here
WRITE: / 'Hello World'.
AT LINE-SELECTION.
WRITE: 'Testline'.
* and some more things
AT USER-COMMAND.
BREAK-POINT.
CASE sy-ucomm.
WHEN 'MYBACK'.
ENDCASE.
Now you can define your own status:
Don't forget to define PICK - or the double click will not work.
Define your own back-function.
Related
My task is to customize the Header Details Screen of the ME33K transaction, the goal is to add a box with new fields that should appear only if the Agreement type is the one I defined by using the transaction SPRO (ex: Agreement type ABC).
I started making an enhancement to that screen by using the CMOD transaction, I created a dummy box and field with some hard-coded input value and it's working fine.
My next step would be to make these new fields appear only if the Agreement is of type ABC, but I cannot find the correct approach.
I tried doing some Screen-Loop programming and deactivating the box and/or fields, but the only ones that get deactivated are the standard ones that exist already, the ones I added with the enhancement are not affected.
EDIT :
The enhancement I used was 'MM06E005'.
I wrote the following Screen-Loop code in the include provided in the 'EXIT_SAPMM06E_006' user exit :
loop at screen.
if screen-name = 'CUSTOM_FIELDS'.
screen-active = 0.
modify screen.
endif.
endloop.
The enhancement MM06E005 refers to the subscreen SAPLXM06 0101, that you have created with a box with all your custom screen fields.
To hide your custom screen fields, you must:
Call a PBO (Process Before Output) module, to be done in the flow logic of your subscreen (the one which contains the screen fields):
PROCESS BEFORE OUTPUT.
...
MODULE modify_screen_field_attributes.
...
PROCESS AFTER INPUT.
...
In the include LXM06O01 (preferrably), do this:
MODULE modify_screen_field_attributes OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'CUSTOM_FIELDS'. " name of one screen field
screen-active = 0. " hide the screen field
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDMODULE.
I have a screen with one table control which displayed values from my internal db.
It worked out flawlessly.
I added another table control which didn't worked out the way i wanted.
I deleted the control CONTROLS: tc_two TYPE TABLEVIEW USING SCREEN 9000.
And now I'm getting a runtime error CONTROL-Variable not found.
Q: What happens if i declare new Controls? Where do they get implemented?
I tried to debug my code and the error appears at CALL SCREEN 9000.
Here is the full code:
REPORT zsch_test.
CONTROLS: tc_one TYPE TABLEVIEW USING SCREEN 9000.
DATA: it_uebung TYPE TABLE OF zsch_uebung,
ok_code TYPE sy-ucomm,
fill TYPE i.
TABLES zsch_uebung.
DATA: lines TYPE i,
limit TYPE i.
SELECT * FROM zsch_uebung INTO CORRESPONDING FIELDS OF TABLE it_uebung WHERE status = '1'.
CALL SCREEN 9000.
MODULE status_9000 OUTPUT.
SET PF-STATUS 'STATUS9000'.
* SET TITLEBAR 'xxx'.
DESCRIBE TABLE it_uebung LINES fill.
tc_one-lines = fill.
ENDMODULE.
MODULE fill_table_control OUTPUT.
READ TABLE it_uebung INTO zsch_uebung INDEX tc_one-current_line.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
lines = sy-loopc.
MODIFY it_uebung FROM zsch_uebung INDEX tc_one-current_line.
ENDMODULE.
MODULE user_command_9000 INPUT.
ok_code = sy-ucomm.
CASE ok_code.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN OTHERS.
ENDCASE.
ENDMODULE.
Screen 9000:
PROCESS BEFORE OUTPUT.
MODULE STATUS_9000.
LOOP WITH CONTROL TC_ONE.
MODULE fill_table_control.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
LOOP WITH CONTROL TC_ONE.
MODULE read_table_control.
ENDLOOP.
MODULE USER_COMMAND_9000.
Thanks!
sadly it's in german
From the fact that the problem disappeared apparently without further action, one might assume that this was either a buffer issue (which is why you should re-start the entire transaction when testing a changed program) or you accidentally failed to activate the entire program (and, for example activated only the report source, but not the screen definition).
Suppose I type a Java method call with an argument that I intend to make into a field:
knownObject.knownMethod(newField);
At this point, newField is highlighted as compilation error. I can press Alt+Enter and select "Create Filed 'newField'" from the menu.
That brings me up to the beginning of the class file where other fields are defined.
I can press Enter to confirm the new field's type.
Now I'd like to go back to my knownMethod() call and continue coding. How do I do that?
Bonus question: in the above situation, Ctrl+Shift+Backspace may help because I just edited the the knownMethod() call. What if I decide to first type in multiple arguments to the method? How do I get back to the argument I've just created a field for in that case?
For getting back to a previous caret location the Navigate > Back menu item usually works (CtrlAltLeft Arrow on Windows). Another option may be to use Edit > Find > Find Usages on the field (enable the Skip results tab with one usage checkbox setting)
I've started using QTP last weekend so I'm still a bit confused about some things.
I've coded a function that opens an URL on IE, performs some actions and writes a report. But I have a little problem: at a certain point the function has to click on a button to go on but this button's value is changed at every refresh of the page.
For example: at the first access the button's value (or label) is "Results List (51)" but, if I refresh the page, the value becomes "Results List (11)".
What changes is the number inside the brackets (that identifies the number of results inside the list).
Obviously I recorded the action only one time and the result is this:
Browser("myBrowser").Page("myPage").Frame("myFrame").WebButton("Results List 51)").Click
How can I click on the button without having to worry about it's value?
You should open the object repository and have a look at the description that was create for your WebButton then make the property in question a regular expression.
In your case the value should be Results List \(\d+\), this means Result List followed by open-parentheses, followd by one or more digits (a number) followed by close-parentheses.
Here's an explanation on how to use regular expressions in UFT.
This question reminded me of the days when I was a beginner in QTP ;) I think I still am!
Coming to your question -
If you don't really care about what is inside the brackets then you can just give Results List*.* but if you want to check if there is a bracket and digits within it then use the value suggested by Motti i.e. Results List (\d+)
Detailed Steps as you are a rookie:
1) Go to Resources->Object Repository
OR
In the Resources pane expand your action and double-Click the local object repository (You recorded hence the objects will be in local)
2) Click on the Concerned Object so that the object properties specific to this object is displayed.
3) Select the property (name?), at the extreme right you will see a button to configure the value, click on it.
4) Type the text Results List (\d+) or Results List*.*, select the checkbox for regular expressions.
5) A message box will appear, Click on No and then OK button.
Your script should run now!
I have a standard form in MS-Access which lists a bunch of orders, and each row contains order no, customer, etc fields + a button to view notes and attached document files.
On request from our customer we should gray out the button btnAnm (or check or uncheck a checkbox) depending on a calculation from two queries to two other tables (a SELECT COUNT WHERE and a check if a text field is empty).
I've tried btnAnm_BeforeUpdate(...) and btnAnm_BeforeRender(...) and put breakpoints in the subs, but none of them trigger. The same if I use the control Ordernr instead of btnAnm.
I'd like a function in the Detail VBA code to be triggered for each "Me." (row) so to speak, and set the row's control's properties in that sub.
What do I do? I've looked at the help file and searched here.
*Edit: So I want to do something that "isn't made to work that way"? Ie. events are not triggered in Details.
As an alternative, could I base the value of a checkbox on each line on a query based on the 'Ordernr' field of the current row and the result of a SELECT COUNT from another table and empty field check?
Do I do this in the query the list is based on, or can I bind the extra checkbox field to a query?
A description of how to do this (combine a COUNT and a WHERE "not empty" to yes/no checkbox value) would be perfectly acceptable, I think! :)*
You cannot do much with an unbound control in a continuous form, anything you do will only apply to the current record. You can use a bound control with a click event so that it acts like a button.
Presumably the related documents have a reference to the order number that appears on your form, which means that you can create a control, let us call it CountOrders, with a ControlSource like so:
=DCount("OrderID","QueryName","OrderID=" & [OrderID])
The control can be hidden, or you can set it up to return true or False for use with a textbox, you can also use it for Conditional Formatting, but sadly, not for command buttons.
Expression Is [CountOrders]>0
You can also hide the contents and add a click event so that is acts in place of the command button. Conditional Formatting will allow you to enable or disable a textbox.
As I understand your question, you have a continuous form with as command button that appears on each row - and you'd like to enable/disable the button conditionally depending on the contents of the row.
Unfortunately you can't do that. It seems that you can't reference the individual command buttons separately.
Having wanted to do something similar in the past I came up with two alternate ways of setting up my interface.
Put a trap into the onClick code for the Button. Which is icky, because it is counter intuitive to the user. But it gets you that functionality now.
Move the command button (and editable fields) up into the form header, and make the rows read only. Your users then interact with the record only in the header, and select the record they want work with in the list below. As I recall this is known a Master-Detail interface.