I have the following sql code:
UPDATE google_calendar_accounts SET google_refresh_token="d",google_org_token="d" WHERE userID=5;
IF ROW_COUNT()=0 THEN
INSERT INTO google_calendar_accounts (userID,google_refresh_token,google_org_token) VALUES (5,"d","d"); END IF
and I am getting the error:
You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '' at line 2
I am using mariadb 10.1.14
In spite the comment suggesting to do INSERT ... ON DUPLICATE KEY UPDATE ..., There may be a reason to do the update first, and insert just if there was no row affected, like the OP tried: this way auto increment won't be increased in vain.
So, a possible solution to the question may be using insert from select with a condition where row_count()=0
For example:
--first query
UPDATE google_calendar_accounts
SET google_refresh_token='d',google_org_token='d'
WHERE userID=5;
--second query use the affected rows of the previous query
INSERT IGNORE INTO google_calendar_accounts (userID,google_refresh_token,google_org_token)
SELECT 5,'d','d' WHERE ROW_COUNT()=0
BTW: I've added IGNORE to the insert query for a case there was a row match to the update condition but it wasn't updated since all columns was identical to the updated, like in the case before the update there was already row 5,'d','d'.
In such case, if the 5 is primary or unique key the query won't fail.
Related
New to sql statements etc and I have an issue with what i am doing using squirrelSQL on linux machine
I Created a table and used the following sql statements:-
INSERT INTO FIRSTTABLE VALUES
(11,'TEN','STEVE'),(21,'TWENTY','JO'),(31,'THIRTY','KIDS')
ALTER TABLE FIRSTTABLE
ADD SURNAME VARCHAR(15);
this works fine however when i attempt to insert data/values into the the surname row i keep experiencing errors, the SQL statement i am using is:-
INSERT INTO FIRSTTABLE (SURNAME)
VALUES ('THOMAS'),('THOMAS'),('THOMAS'),('THOMAS');
This particular statement returns the following error:-
Error: Column 'ID' cannot accept a NULL value.
SQLState: 23502
ErrorCode: 30000
I only wish to add data/values into the surname column,after creating a new column with the alter table statement, i have tried many different combinations including using a SELECT statement prior to the INSERT statement above which also gives errors any guidance will be greatly appreciated,
You are inserting into Surname, without assigning a value to the other fields. You are getting this error message because ID is blank, and should not.
Understand that INSERT creates new rows. If you wish to modify existing rows, use UPDATE
In this case you could use UPDATE FIRSTTABLE SET SURNAME='THOMAS';
Omitting the WHERE clause affects all the fields in the table.
Hope it helps, and good luck in your learning process!
The approach is wrong, you need to:
UPDATE FIRSTTABLE SET SURNAME='THOMAS' WHERE ID IN (11, 21, 31)
Inserting will add a new row to the table. So you need to update a row using
UPDATE FIRSTTABLE SET SURNAME="THOMAS" WHERE ID=11
At work we have a SQL Server database. I don't know the db that well. I have created a new column in the table for some new functionality....straight away I have started seeing errors
My statement was this:
ALTER TABLE users
ADD locked varchar(50) NULL
GO
The error is:
Insert Error: Column name or number of supplied values does not match table definition
I have read that the error message appears when during an INSERT operation either the number of supplied column names or the number of supplied values does not match the table definition.
But I have checked so many times and i have changed the PHP code to include this columns data yet I still receive the error.
I have run the SQL query directly on the db and still get the error.
Funny enough the query which gets the error is an Update.
UPDATE "users"
SET "users"."date_last_login" = GETDATE()
WHERE id = 1
Have you considered it could be a trigger causing it?
This is the error message you would get.
If its an Update action causing it check trigger actions that Updates on that table run.
Do it with:
#sp_helptrigger Users, 'UPDATE';
This will show triggers occuring with ‘update’ actions.
If there is a trigger, grab the triggers name and run the below (but replace TriggerNameHere with real trigger):
#sp_helptext TriggerNameHere;
This will give you any SQL that the trigger runs and could be the INSERT the error message is referring to.
Hope this helps
Aside from TRIGGERS,
the reason for that is because you are using implicit type of INSERT statement. Let's say your previous number of columns on the table is 3. You have this syntax of INSERT statement,
INSERT INTO tableName VALUES ('val1','val2','val3')
which executes normally fine. But then you have altered the table to add another column. All of your INSERT queries are inserting only three values on the table which doesn't matches to the total number of columns.
In order to fix the problem, you have to update all INSERT statements to insert 4 values on the table,
INSERT INTO tableName VALUES ('val1','val2','val3', 'val4')
and it will normally work fine.
I'll advise you to use the EXPLICIT type of INSERT wherein you have to specify the columns you want to insert values with. Eg,
INSERT INTO tableName (col1, col2, col3) VALUES ('val1','val2','val3')
in this ways, even if you have altered your tables by adding additional columns, your INSERT statement won't be affected unless the column doesn't have a default value and which is non-nullable.
We have a status table. When the status changes we currently delete the old record and insert a new.
We are wondering if it would be faster to do a select to check if it exists followed by an insert or update.
Although similar to the following question, it is not the same, since we are changing individual records and the other question was doing a total table refresh.
DELETE, INSERT vs UPDATE || INSERT
Since you're talking SQL Server 2008, have you considered MERGE? It's a single statement that allows you to do an update or insert:
create table T1 (
ID int not null,
Val1 varchar(10) not null
)
go
insert into T1 (ID,Val1)
select 1,'abc'
go
merge into T1
using (select 1 as ID,'def' as Val1) upd on T1.ID = upd.ID --<-- These identify the row you want to update/insert and the new value you want to set. They could be #parameters
when matched then update set Val1 = upd.Val1
when not matched then insert (ID,Val1) values (upd.ID,upd.Val1);
What about INSERT ... ON DUPLICATE KEY? First doing a select to check if a record exists and checking in your program the result of that creates a race condition. That might not be important in your case if there is only a single instance of the program however.
INSERT INTO users (username, email) VALUES ('Jo', 'jo#email.com')
ON DUPLICATE KEY UPDATE email = 'jo#email.com'
You can use ##ROWCOUNT and perform UPDATE. If it was 0 rows affected - then perform INSERT after, nothing otherwise.
Your suggestion would mean always two instructions for each status change. The usual way is to do an UPDATE and then check if the operation changed any rows (Most databases have a variable like ROWCOUNT which should be greater than 0 if something changed). If it didn't, do an INSERT.
Search for UPSERT for find patterns for your specific DBMS
Personally, I think the UPDATE method is the best. Instead of doing a SELECT first to check if a record already exists, you can first attempt an UPDATE but if no rows are affected (using ##ROWCOUNT) you can do an INSERT.
The reason for this is that sooner or later you might want to track status changes, and the best way to do this would be to keep an audit trail of all changes using a trigger on the status table.
I am new to Oracle and I want to check if particular primary key value is present or not. If value exists then just update the entire row .If value is not present, then insert new row.
INSERT INTO table (a,b,c) VALUES (1,2,3)
ON DUPLICATE KEY UPDATE c=c+1;
Code above works on MySql. How to achieve the same in Oracle 10g? Can anyone please help?
Look up the SQL standard MERGE statement, which is supported by (more recent versions of) Oracle. This will work with other DBMS than Oracle too.
I want to add a row using SQLs INSERT statement. Is it possible that as part of this statement I can somehow get the value of the column userId which I don't update but is the AUTO_INCREMENT primary key. I need this value to update another table, however I can't follow the Insert statement immediately with a SELECT statement as there is no other unique identifier in the table on which to select.
INSERT INTO objectUrl(disp_name, loggedIn) VALUES('please change this', true)
Is it possible to get the row number (column name userId) and if so how do you do it?
In MySQL it's called LAST_INSERT_ID(). I believe to be technically correct, the two statements should be wrapped in a transaction so that some other INSERT doesn't mess up what ID you get back.
In SQL Sever you have IDENT_CURRENT(‘tablename’) which will only grab it from that table (still need a transaction to be safe). You could also use SCOPE_IDENTITY() which theoretically will always return the one you expect as long as you aren't doing something weird with your connection.
For MySQL you have:
select last_insert_id()