How to install beautifulsoup4 in pycharm:
Click on settings, now look for the project interpreter. This is where you can add beautifulsoup by clicking on the green cross on the right side of the screen.
I did this in pycharm, but there occurs error in installation. The error message is:
Traceback (most recent call last):
File "C:/Users/Rishi/PycharmProjects/untitled2/beautifuls.py", line 3, in
from bs4 import BeautifulSoup
File "C:\Python34\lib\site-packages\bs4_init_.py", line 175
except Exception, e:
^
SyntaxError: invalid syntax
Process finished with exit code 1
python.org/pypi
This is the repositories set in the available packages list.
Do you have a version of Python 2 on the same machine as your Python 3.4 interpreter?
If so you may want to check to make sure that you are using the correct version of pip. I would suggest removing beautiful soup and re-adding it manually as a test.
pip3 install BeautifulSoup4
You also need to find "beautifulsoup4" (for python 3.x)
Related
I am getting the following error with plotnine==0.9 and matplotlib==3.6.
File "D:\Python\Python310\lib\site-packages\plotnine\stats\stat_density_2d.py", line 3, in <module>
import matplotlib._contour as _contour
ModuleNotFoundError: No module named 'matplotlib._contour'
If I downgrade matplotlib==3.5, the problem goes away.
It's discussed here and it's already fixed here Note that it's already merged to main.
It was due to a internal matplotlib call that is no longer supported and has been replaced.
So I guess you could choose between:
downgrade to mlp 3.5.3
install plotnine#main
till the next plotnine release.
Carlos's answer is correct. However if anybody else, like me, is uncertain of how to install plotnine#main, you can implement the fix rather easily:
Find the site_packages folder you python script uses. It usually is a subdirectory of the python version you are using, which can located reliably by trying to reinstall matplotlib or any other package you know you have access to, and checking the logs in the console. ex using python -m pip install matplotlib.
Go down into the site_packages/plotnine/stats directory and open up the stats_density_2d.py file in your editor of choice.
Apply & save the modifications made in the fix. Alternatively, overwrite the file with the one from the github.
ModuleNotFoundError: No module named 'matplotlib._contour'
Issues with matplotlib 3.6.1 and
plotnine 0.9.0
K.I.S.S.
in terminal:
pip show matplotlib #enables you to check version
pip install matplotlib==3.5 #revert and problem is resolved for now.
no more:
ModuleNotFoundError: No module named 'matplotlib._contour'
resolves issue for now that will stop progress...
After installing Anaconda on a Virtual Machine I run a script which is working on my local machine but not on my Virtual Machine.
I'm getting the error Message:
C:\Users\...\python>"C:\ProgramData\Anaconda3\python.exe" "C:\Users\...\reporting.py"
C:\ProgramData\Anaconda3\lib\site-packages\numpy\__init__.py:140: UserWarning: mkl-service package failed to import, therefore Intel(R) MKL initialization ensuring its correct out-of-the box operation under condition when Gnu OpenMP had already been loaded by Python process is not assured. Please install mkl-service package, see http://github.com/IntelPython/mkl-service
from . import _distributor_init
Traceback (most recent call last):
File "C:\Users\...\reporting.py", line 1, in <module>
import pandas as pd
File "C:\ProgramData\Anaconda3\lib\site-packages\pandas\__init__.py", line 16, in <module>
raise ImportError(
ImportError: Unable to import required dependencies:
numpy:
IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE!
Importing the numpy C-extensions failed. This error can happen for
many reasons, often due to issues with your setup or how NumPy was
installed.
We have compiled some common reasons and troubleshooting tips at:
https://numpy.org/devdocs/user/troubleshooting-importerror.html
Please note and check the following:
* The Python version is: Python3.8 from "C:\ProgramData\Anaconda3\python.exe"
* The NumPy version is: "1.18.5"
and make sure that they are the versions you expect.
Please carefully study the documentation linked above for further help.
Original error was: DLL load failed while importing _multiarray_umath: The specified module could not be found.
The VM has no Internet. Is there any way to install all the required libs and frameworks?
You can package your script and used libraries using something like Pyinstaller. When you use an virtualenv keep in mind that all the packages that you use during pyinstaller execution are stored and may lead to an huge .exe
Below are the mentioned error while importing pandas library in Power BI in python script.
Details: "ADO.NET: Python script error.
C:\USERS\YADAVP\ANACONDA3\lib\site-packages\numpy\__init__.py:140: UserWarning: mkl-service package failed to import, therefore Intel(R) MKL initialization ensuring its correct out-of-the box operation under condition when Gnu OpenMP had already been loaded by Python process is not assured. Please install mkl-service package, see http://github.com/IntelPython/mkl-service
from . import _distributor_init
Traceback (most recent call last):
File "PythonScriptWrapper.PY", line 2, in <module>
import os, pandas, matplotlib
File "C:\USERS\YADAVP\ANACONDA3\lib\site-packages\pandas\__init__.py", line 17, in <module>
"Unable to import required dependencies:\n" + "\n".join(missing_dependencies)
ImportError: Unable to import required dependencies:
numpy:
IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE!
Importing the numpy c-extensions failed.
- Try uninstalling and reinstalling numpy.
- If you have already done that, then:
1. Check that you expected to use Python3.7 from "C:\USERS\YADAVP\ANACONDA3\python.exe",
and that you have no directories in your PATH or PYTHONPATH that can
interfere with the Python and numpy version "1.18.1" you're trying to use.
2. If (1) looks fine, you can open a new issue at
https://github.com/numpy/numpy/issues. Please include details on:
- how you installed Python
- how you installed numpy
- your operating system
- whether or not you have multiple versions of Python installed
- if you built from source, your compiler versions and ideally a build log
- If you're working with a numpy git repository, try `git clean -xdf`
(removes all files not under version control) and rebuild numpy.
Note: this error has many possible causes, so please don't comment on
an existing issue about this - open a new one instead.
Original error was: DLL load failed: The specified module could not be found.
What is the resolution to sort this kind of error in Power BI?
Forget Anaconda and use WinPython.
I tried Anaconda for days with all the workarounds available in StackOverflow and other forums, and they took me nowhere.
Then I tried WinPython, and it worked immediately. Of course, you will need to change the PowerBI options accordingly.
To install WinPython: https://github.com/winpython/winpython
To change the detected Python home directory: https://learn.microsoft.com/en-us/power-bi/connect-data/desktop-python-scripts#enable-python-scripting
If you consider my answer, you won't need to downgrade Python, PBI, or anything else.
I had the same error. Unfortunately, PowerBI wont work with Jupyter Notebook Python.
So you have to install a "normal" Python: https://www.python.org/downloads/
And configure the Python you want to use in PowerBI and install your needed Python libraries via pip
Edit: Please use Python 3.8 because 3.9 doesnt support NumPy for now
I'm trying to follow along the Audio Recognition Network tutorial.
I've created an Anaconda environment with python 3.6 and followed the install instruction accordingly for installing the GPU whl.
I can run the 'hello world' TF example.
When I go to run 'train.py' in the Audio Recognition Network tutorial/example, I get:
Traceback (most recent call last):
File "train.py", line 79, in <module>
import input_data
File "/home/philglau/speech_commands/input_data.py", line 35, in <module>
from tensorflow.contrib.framework.python.ops import audio_ops as contrib_audio
ImportError: cannot import name 'audio_ops'
The code in the tutorial that fails is:
from tensorflow.contrib.framework.python.ops import audio_ops as contrib_audio
I then backed up that chain until I could import some part of it:
import tensorflow.contrib.framework as test ==> works
import tensorflow.contrib.framework.python as test --> fail:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
AttributeError: module 'tensorflow.contrib.framework' has no attribute 'python'
Not sure where I'm going wrong on my install.
Details:
Ubuntu 16.04
Anaconda env with python 3.6
Followed the 'anaconda' instruction on the TF install page. (GPU version)
I also tried using a python 2.7 env for anaconda but got the same results.
It looks like they're releasing the audio_ops modules in version 1.4 (https://github.com/tensorflow/tensorflow/issues/11339#issuecomment-327879009).
Until v1.4 is released, an easy way around this is to install the nightly tensorflow build
pip install tf-nightly
or with the docker image linked in the issue comment.
The short answer:
The framework is missing the "audio_ops.py" and the example wont work until the file is released. Or you code the wrappers.
More on this:
If you go to the: tensorflow.contrib.framework.python.ops local folder you can find other *_ops.py files but not the "audio_ops.py".
If you get it from the Master at: https://github.com/tensorflow/tensorflow/tree/master/tensorflow/contrib/framework/python/ops
You will find the file is almost empty and with import labels wrong: "audio_ops" vs "gen_audio_ops".
With almost empty I mean that: decode_wav, encode_wav, audio_spectrogram , mfcc are not implemented/wrapped.
So, no working example and no fun.
We need to check again when "audio_ops.py" is released.
Here:
https://github.com/tensorflow/tensorflow/issues/11339
You can find a Developer saying: "we don't actually want to make them public / supported yet. I'm sorry this decision wasn't better documented"
I'm getting the below error when I'm trying to run a test case in RobotFramework. I installed Selenium2Library but it looks like RF can't find it. Everything works fine with SeleniumLibrary.
Selenium2Library is installed in C:\Python27\lib\site-packages. I uninstalled and installed it a few times to make sure the installation is correct. There were no errors during the installations.
Any ideas where to look for the problem?
Here is the error:
c:\testing>pybot testone.txt
[ ERROR ] Error in file 'c:\testing\testone.txt' in table 'Settings': Importing test library 'Selenium2Library' failed: ImportError: No module named selenium
Traceback (most recent call last):
File "C:\Python27\lib\site-packages\Selenium2Library\__init__.py", line 2, in <module>
from keywords import *
File "C:\Python27\lib\site-packages\Selenium2Library\keywords\__init__.py", line 3, in <module>
from _browsermanagement import _BrowserManagementKeywords
File "C:\Python27\lib\site-packages\Selenium2Library\keywords\_browsermanagement.py", line 4, in <module>
from selenium import webdriver
PYTHONPATH:
C:\Python27\lib\site-packages\robot\libraries
C:\Python27\lib\site-packages
C:\Windows\system32\python27.zip
C:\Python27\DLLs
C:\Python27\lib
C:\Python27\lib\plat-win
C:\Python27\lib\lib-tk
C:\Python27
C:\Python27\lib\site-packages\wx-2.8-msw-unicode
Resolved the problem by removing Selenium2Library folder and reinstalling it with pip command (which installs all necessary packages).
pip install robotframework-selenium2library
I also had a similar problem. I'm running both Python 3.7 and 3.8 because RIDE does not work with 3.8.
I had installed robot framework for Python 3.8 before, and after that I installed everything on 3.7. The problem was fixed when I uninstalled robot framework (and every package related to it) from 3.8 and installed every package on Python 3.7 only.