In aws s3 web interface we can select a specific folder then navigate to properties and select IFA... like this
This will start processing all existing data, but if you open the same properties page again its not selected. If you select again and apply it will show a processing bar again...
Its ambiguous does that folder remain IFA once selected and saved? will future uploads to that folder stored in IFA storage? If not how do we do that?
I know that there is migration rule like after 30 days move to IFA but i know upfront that my data is suitable for IFA storage...
"For all selected items" means the current objects, not the folders.
The folders do not exist in S3 in any meaningful sense yes, you can "create" a folder but all that does is create a placeholder for convenience in the console -- there are never any files actually "in" the folder -- so it is impossible to actually set any kind of properties on them. The folders that appear in the console are just a human-friendly representation of a hierarchy, created by splitting the keys on / delimiters.
In Amazon S3, buckets and objects are the primary resources, where objects are stored in buckets. Amazon S3 has a flat structure with no hierarchy like you would see in a typical file system. However, for the sake of organizational simplicity, the Amazon S3 console supports the folder concept as a means of grouping objects.
http://docs.aws.amazon.com/AmazonS3/latest/UG/FolderOperations.html
If you want objects stored for their lifetime as either STANDARD_IA or REDUCED_REDUNDANCY then you have to initially upload them that way. If you want them to transition to STANDARD_IA or GLACIER later, then you use lifecycle policies.
Note also that changing storage classes in the console like you are doing incurs the same cost as re-uploading the object, because changing storage classes is accomplished by the console invoking the S3 copy operation -- using the same key for source and destination. It's $0.01 per 1000 objects, so use it wisely on large collections of objects. Objects and their metadata are immutable, so modifying them (including storage class, which isn't technically metadata) requires replacing the object with an identical object.
Related
This question already has answers here:
Add folder in Amazon s3 bucket
(16 answers)
Closed last month.
As per my understanding, object storage has a 'flat' structure so you cannot create folders within buckets. However, in both GCP & AWS, I am able to upload regular folders to the buckets, which also look like regular folders on their web UI console. What is the difference between the folders I am seeing on these buckets, and the folders which are there in a file-storage system (like my personal laptop)?
As far as I know Object Storage has a 'flat' structure so you cannot create folders within buckets, nor can you nest buckets in buckets.
If you need to have some form of 'folder'-like structure, then using prefixes is the way to go. You'll then end up with this structure: {endpoint}/{bucket-name}/{object-prefix}/{object-name}.
thats what you are seeing according to me
Amazon S3 has a flat structure instead of a hierarchy as you would see in a file system. However, for the sake of organizational simplicity, the Amazon S3 console supports the folder concept as a means of grouping objects. It does this by using a shared name prefix for objects (that is, objects have names that begin with a common string). Object names are also referred to as key names.
For example, you can create a folder on the console named photos and store an object named myphoto.jpg in it. The object is then stored with the key name photos/myphoto.jpg, where photos/ is the prefix.
Here are two more examples:
If you have three objects in your bucket—logs/date1.txt,
logs/date2.txt, and logs/date3.txt—the console will show a folder
named logs. If you open the folder in the console, you will see three
objects: date1.txt, date2.txt, and date3.txt.
If you have an object named photos/2017/example.jpg, the console will
show you a folder named photos containing the folder 2017. The folder
2017 will contain the object example.jpg.
When you create a folder in Amazon S3, S3 creates a 0-byte object with a key that's set to the folder name that you provided. For example, if you create a folder named photos in your bucket, the Amazon S3 console creates a 0-byte object with the key photos/. The console creates this object to support the idea of folders.
You can read more in the Amazon S3 user guide.
I'm trying to figure out how to store intermediate Kedro pipeline objects both locally AND on S3. In particular, say I have a dataset on S3:
my_big_dataset.hdf5:
type: kedro.extras.datasets.pandas.HDFDataSet
filepath: "s3://my_bucket/data/04_feature/my_big_dataset.hdf5"
I want to refer to these objects in the catalog by their S3 URI so that my team can use them. HOWEVER, I want to avoid re-downloading the datasets, model weights, etc. every time I run a pipeline by keeping a local copy in addition to the S3 copy. How do I mirror files with Kedro?
This is a good question, Kedro has CachedDataSet for caching datasets within the same run, which handles caching the dataset in memory when it's used/loaded multiple times in the same run. There isn't really the same thing that persists across runs, in general Kedro doesn't do much persistent stuff.
That said, off the top of my head, I can think of two options that (mostly) replicates or gives this functionality:
Use the same catalog in the same config environment but with the TemplatedConfigLoader where your catalog datasets have their filepaths looking something like:
my_dataset:
filepath: ${base_data}/01_raw/blah.csv
and you set base_data to s3://bucket/blah when running in "production" mode and with local_filepath/data locally. You can decide how exactly you do this in your overriden context method (whether it's using local/globals.yml (see the linked documentation above) or environment variables or what not.
Use separate environments, likely local (it's kind of what it was made for!) where you keep a separate copy of your catalog where the filepaths are replaced with local ones.
Otherwise, your next best bet is to write a PersistentCachedDataSet similar to CachedDataSet which intercepts the loading/saving for the wrapped dataset and makes a local copy when loading for the first time in a deterministic location that you look up on subsequent loads.
Background
We know it's possible to setup a devops pipeline that deploys updates to AEM via a blue/green approach by using crx2oak to migrate the content from old to new environment. Why is out of scope of this question.
The problem with this approach is the content copy operation can take a significant time, as the amount of content in the JCR grows. Other ideas to mittigate this are appreciated.
We also know that AEM can have a S3 datastore that off-loads the binary content into a S3 bucket which would not be re-built during blue/green deployment as per:
https://helpx.adobe.com/experience-manager/6-3/sites/deploying/using/storage-elements-in-aem-6.html#OverviewofStorageinAEM6
What is unclear from Adobe's documentation is whether the same S3 bucket can be shared across AEM instances (i.e. blue/green instances). Maybe it's just my google fu that has failed...
Question(s)
When a new AEM instance is configured to use a S3 datastore that already has content in it from the old instance, when crx2oak is used to migrate content, will the new instance be able to access the existing content?
Are there any articles/blogs that describe what the potential time savings of this approach would be?
Yes I could do an experiment, and may do so in the future to answer my own question. I'm looking for information from anyone who has already done this? I'm an engineer so will not re-invent the wheel if someone else has done so.
You can certainly share the same S3 bucket between instances - in fact, this is commonly used along with binary-less replication from author->publisher(s) and is a tried and true configuration.
It's even possible to share the same bucket between completely different environments (e.g. DEV/STAGE, or BLUE/GREEN in your case). The main "gotcha" to be aware of is with regard to DataStore Garbage Collection (DSGC) because it's very possible that there will be blobs which are referenced by only some of the instances sharing the bucket and so when purging unused blobs this needs to be taken into account.
This is all part of the design though, and there is a flag designed specifically for this purpose which tells DSGC to only execute the first phase (the "mark" phase) of GC, and skip the 2nd "sweep" phase, until all instances have marked which blobs they wish to keep/discard. Once all instances have done so the sweep phase can be run to purge blobs not needed by any instances using the bucket.
For a more detailed explanation see the Oak docs:
https://jackrabbit.apache.org/oak/docs/plugins/blobstore.html#Shared_DataStore_Blob_Garbage_Collection_Since_1.2.0
I find it helps to understand that pretty much all of the datastore implementations are done such that blobs are stored according to their checksum, so the same file added uploaded twice will only have one copy stored in the datastore, and there will be two segment store records referencing that same blob. In the same way, multiple AEM instances sharing the same bucket will be able to find a given blob regardless of which instance put it there in the first place.
You can observe see this in action easily with FileDataStore by finding a blob and sha256'ing it - e.g. (this example is on OS X, the checksum command on Linux/Windows will be slightly different):
$ shasum -a256 crx-quickstart/repository/datastore/0c/9e/40/0c9e405fc8d0f0405930cd0044611cfbf014938a1837ae0cfaa266d7732d1002
0c9e405fc8d0f0405930cd0044611cfbf014938a1837ae0cfaa266d7732d1002 crx-quickstart/repository/datastore/0c/9e/40/0c9e405fc8d0f0405930cd0044611cfbf014938a1837ae0cfaa266d7732d1002
There you can see that a) the filename is the checksum, and b) it's nested using the first 3 pairs of characters from that checksum, so you can locate the file by just knowing the hash and if you store the same binary, even if the name or JCR metadata is different, the blob referenced will be the same literal file on disk.
From memory S3 datastore uses prefixes rather than directory nesting because this performance better, but the principle is the same.
Finally, a couple of things to consider are:
1) S3 storage is relatively cheap (and practically unlimited) so there is an argument to be made that it's not as necessary to perform regular DSGC unless you're really trying to pinch pennies.
2) If you do run DSGC you need to think about how this will work with whatever backup strategy you're using for the AEM instances. For instance, if you roll back a segment store shortly after running DSGC you'll likely have to recover some of those purged blobs. You can use versioning and/or lifecycle rules to help with this, but it can add significant additional complexity and time to your restore process.
If you opt to simply skip DSGC and leave the blobs there indefinitely it's a good idea to make sure the access key or IAM roles AEM is using doesn't have the DeleteObject permission for the bucket, just to be sure a rogue GC process can't delete anything.
Hope this helps.
Edit
In all that I forgot to actually answer your question - yes it will save some time in cloning in most cases. You'll still need to sync the segment store (obviously) and there are various approaches for this. crx2oak is certainly one - you'll see in the documentation there are specific options for using it w/ S3 where you supply a configuration file (basically a serialised .config file like you'd use with Felix/OSGi).
You can also use something like rsync to simply copy the TAR files over (while at least the target AEM is stopped. Oak is generally atomic so a hot copy from the source can work in theory, but YMMV).
Finally you could obviously use Mongo and cluster the segment store that way, but all the usual cost/complexity/performance issues with doing so apply).
Another interesting development on the horizon for blue/green type is the CompositeNodeStore - there is a good talk from the 2017 adaptTo() conference that talks about this:
https://adapt.to/2017/en/schedule/zero-downtime-deployments-for-the-sling-based-apps-using-docker.html
An external datastore will help a lot, as usually the most space is used by binary assets. The pure content typed in by real people is much less.
On my current project (quite small, but relations should be normal):
Repository 4,8 GB total (4.1 GB Segment Store, 780 MB Index)
File DataStore 222 GB total
If you wanna do it, I have the following remarks:
There are different datastores available. For testing I would start with the File DataStore.
The S3 DataStore makes only sense in my point of view, if you are hosting at Amazons AWS anyway. Adobe Managed Services is doing this, and so S3 makes sense for them. But also there only if you have more than 500 GB assets.
If you use the green/blue approach, then be careful the DataStore garbage collection (just do it manually). The shared Datastore is meant for several publishers, that have the same content. As example you could have the following situation: Your editors delete some assets, you run the DataStore GC and finally your rollback your environment. That means the assets are still in the content repository, but the binaries are cleaned out of the DataStore.
In order to to use a shared file datastore, you need to do the following:
Unpack Quickstart java -jar AEM_6.3_Quickstart.jar -unpack
Create an directory for the file datastore (anywhere outside of the crx-quickstart folder)
Create a directory install inside the extracted crx-quickstart folder
Create a file called org.apache.jackrabbit.oak.plugins.blob.datastore.FileDataStore.cfg inside this install folder
This file contains just 1 line path=<path to file datastore> (see https://jackrabbit.apache.org/oak/docs/osgi_config.html)
Place a reference.key file inside the datastore directory. First time it will be created automatically. But if you use always the same key, the same hash-values are used all datastores across all your environments. This is also a prerequisite for a feature called "binary-less replication" (so binary would only be replicated the first time between author and publisher)
kind regards,
Alex
The documentation for the Redshift COPY command specifies two ways to choose files to load from S3, you either provide a base path and it loads all the files under that path, or you specify a manifest file with specific files to load.
However in our case, which I imagine is pretty common, the S3 bucket periodically receives new files with more recent data. We'd like to be able to load only the files that haven't already been loaded.
Given that there is a table stl_file_scan that logs all the files that have been loaded from S3, it would be nice to somehow exclude those that have successfully been loaded. This seems like a fairly obvious feature, but I can't find anything in the docs or online about how to do this.
Even the Redshift S3 loading template in AWS Data Pipeline appears to manage this scenario by loading all the data -- new and old -- to a staging table, and then comparing/upserting to the target table. This seems like an insane amount of overhead when we can tell up front from the filenames that a file has already been loaded.
I know we could probably move the files that have already been loaded out of the bucket, however we can't do that, this bucket is the final storage place for another process which is not our own.
The only alternative I can think of is to have some other process running that tracks files that have been successfully loaded to redshift, and then periodically compares that to the s3 bucket to determine the differences, and then writes the manifest file somewhere before triggering the copy process. But what a pain! We'd need a separate ec2 instance to run the process which would have it's own management and operational overhead.
There must be a better way!
This is how I solved the problem,
S3 -- (Lambda Trigger on newly created Logs) -- Lambda -- Firehose -- Redshift
It works at any scale. With more load, more calls to Lambda, more data to firehose and everything taken care automatically.
If there are issues with the format of the file, you can configure dead letter queues, events will be sent there and you can reprocess once you fix lambda.
Here I would like to mention some steps that includes process that how to load data in redshift.
Export local RDBMS data to flat files (Make sure you remove invalid
characters, apply escape sequence during export).
Split files into 10-15 MB each to get optimal performance during
upload and final Data load.
Compress files to *.gz format so you don’t end up with $1000
surprise bill :) .. In my case Text files were compressed 10-20
times.
List all file names to manifest file so when you issue COPY command
to Redshift its treated as one unit of load.
Upload manifest file to Amazon S3 bucket.
Upload local *.gz files to Amazon S3 bucket.
Issue Redshift COPY command with different options.
Schedule file archiving from on-premises and S3 Staging area on AWS.
Capturing Errors, setting up restart ability if something fails
Doing it easy way you can follow this link.
In general compare of loaded files to existing on S3 files is a bad but possible practice. The common "industrial" practice is to use message queue between data producer and data consumer that actually loads the data. Take a look on RabbitMQ vs Amazon SQS and etc..
Dropbox claims that during syncing only the portion of files that changes are transmitted back to main server, which is obviously a great functionality, but how do they perform changes to files stored in Amazon S3 cloud? So for example, lets say a 30 page document on user's desktop contains changes to only page 4. Dropbox now syncs the blocks representing the changes and what happens on the backend if they files that they store are in the cloud? Does that mean they have to download the 30 page document stored in S3 to their server, then perform replacement of blocks representing page 4, and then uploading back to the cloud? I doubt this would be the case because that would be somewhat inefficient. The other option I could think of is if Amazon S3 provides update of file stored in the cloud based on byte ranges, so for example, make a PUT request to file X from bytes 100-200 which will replace all the bytes from 100 to 200 with value of PUT request. So I was curious how companies that use other cloud services such as Amazon, implement this type of syncing.
Thanks
As S3 and similar storages don't offer filesystem capabilities, anything that pretends to store files and directories needs to emulate a file system. And when doing this files are often split to pages of certain size, where each page is stored in a separate file in the storage. This way the changed block requires uploading only one page (for example) and not the whole file. I should note, that with files like office documents this approach can be faulty if file size is changed - for example, if you insert a page at the beginning or delete a page, then the whole file will be changed and the complete file would need to be re-uploaded. We didn't analyze how Dropbox in particular does his job, and I just described the common scenario. There exist also different "patch algorithms", where a patch can be created locally (if Dropbox has an older local copy in the cache) and then applied to one or more blocks on the server.
There are several synchronizing tools which transfer deltas over the wire like rsync, rdiff, rdiff-backup, etc. For bi-directional synchronising with S3 there are paid services like s3rsync for example. For pure client-side synchronising, tools like zsync can be considered (which is what many people employ to roll-out app updates).
An alternative approach would be to tar-ball a directory, generate a delta file (using rdiff or xdelta3), and upload the delta file by using a timestamp as part of the key. In order to sync, all you need to do is to perform these 2 checks client-side:
You have all the delta files from S3. If not pull them and apply them to generate the latest backup state.
Your last backup state corresponds to your current directory. If not generate a new delta file and push to S3.
The concerning factor here would be the at least 100% additional space utilization, client-side. But this approach will help you revert changes if needed.