I would like to bridge two virtual interfaces on two different VM's in vmware. I tried searching online about this I found out how to bridge a virtual interface to a physical one. Is their a solution for this problem?
Just create a vSwitch on your host, add a network adaptor on both VM's to the vSwitch and you should be all good. Ofcourse there will be no DHCP or anything.....
Related
I ran into some trouble when I tried to ping my Ubuntu virtual guest from my Windows 10 host, but this solution did the trick.
I'm wondering what exactly is a "host-only-adapter" and why cant the I ping the virtual machine by default? How exactly does the virtual machine access the internet when I cant ping it?
As the name suggests, host-only is intended to create a new interface that is virtual and visible to the host and not in anyway connected to the physical interface that actually connects to the internet.
Itcan be thought of as a hybrid between the bridged and internal networking modes: as with bridged networking, the virtual machines can talk to each other and the host as if they were connected through a physical Ethernet switch. Similarly, as with internal networking however, a physical networking interface need not be present, and the virtual machines cannot talk to the world outside the host since they are not connected to a physical networking interface.
You might be wondering what the use-case for this would be.Think for example: one virtual machine may contain a web server and a second one a database, and since they are intended to talk to each other, the appliance can instruct VirtualBox to set up a host-only network for the two. A second (bridged) network would then connect the web server to the outside world to serve data to, but the outside world cannot connect to the database.
How it works
when host-only networking is used, VirtualBox creates a new software interface on the host which then appears next to your existing network interfaces. In other words, whereas with bridged networking an existing physical interface is used to attach virtual machines to, with host-only networking a new "loopback" interface is created on the host. And whereas with internal networking, the traffic between the virtual machines cannot be seen, the traffic on the "loopback" interface on the host can be intercepted.
The great thing about host-only networks is that the host itself sits on this network and so, upon proper config as in you link above, you can reach all the VMs.
Hope my explanation helps!
I currently have two Ubuntu 14.04 virtual machines running on a windows 7 host. The virtual machines are configured to use a bridged network adapter.
When the host machine is hardlined to the internet, the virtual machines are able to ping the outside world as well as be ping by the outside world.
When the host machine is on a wireless network, the virtual machines cannot ping the outside world, and the outside world is not able to ping the virtual machines.
When connected to a wireless network, I receive the 'Destination host unreachable' error when pinging either from the virtual machines to outside, or from outside to the virtual machines.
It may be worth noting that these virtual machines are being run inside VirtualBox. Also something which may be applicable here, section 6.5 of the virtualbox manual states:
Bridging to a wireless interface is done differently from bridging to
a wired interface, because most wireless adapters do not support
promiscuous mode. All traffic has to use the MAC address of the host's
wireless adapter, and therefore VirtualBox needs to replace the source
MAC address in the Ethernet header of an outgoing packet to make sure
the reply will be sent to the host interface. When VirtualBox sees an
incoming packet with a destination IP address that belongs to one of
the virtual machine adapters it replaces the destination MAC address
in the Ethernet header with the VM adapter's MAC address and passes it
on. VirtualBox examines ARP and DHCP packets in order to learn the IP
addresses of virtual machines.
I'm not sure what may be causing this issue. Accessing these virtual machines from the outside world when switching between networks is necessary in my situation. Any ideas as to what may be going on?
Thanks in advance for any help!
Just to provide some value to those who may stumble upon this issue in the future:
The source of this problem stems from a setting within virtualbox. Open virtualbox, and under the Settings > Network > Adapter page, there is a name field.
If attempting to connect to the virtual machines over a wired connection, select your host machines Ethernet adapter.
If attempting to connect to the virtual machines over a wireless connection, select your host machine's wireless adapter.
Hope this helps someone out there!
I am building a sample vagrant box to install Jenkins and push it to atlas cloud.Please find below the steps that I followed.
Vagrant init ubuntu/trusty64
and the normal command to initialize the vagrant machine.
vagrant up
After this if i type command to ssh into the machine
vagrant ssh
It gives me error saying please increase timeout and so.
The main question is how can I ssh into the newly created vagrant machine.
To understand this, I have to go through all the basics. Please find below my findings.
Not attached
In this mode, VirtualBox reports to the guest that a network card is present, but that there is no connection -- as if no
Ethernet cable was plugged into the card. This way it is possible to "pull" the virtual Ethernet cable and disrupt the connection, which can be useful to inform a guest operating system that no network connection is available and enforce a reconfiguration.
Network Address Translation (NAT)
If all you want is to browse the Web, download files and view e-mail inside the guest, then this
default mode should be sufficient for you, and you can safely skip the rest of this section. Please note that there are certain limitations when using Windows file sharing (see Section 6.3.3, “NAT limitations” for details).
NAT Network
The NAT network is a new NAT flavour introduced in VirtualBox latest versions.
Bridged networking
This is for more advanced networking needs such as network simulations and running servers
in a guest. When enabled, VirtualBox connects to one of your installed network cards and exchanges network packets directly, circumventing your host operating system's network stack.
Internal networking
This can be used to create a different kind of software-based network which is visible to selected virtual machines, but not to applications running on the host or to the outside world.
Host-only networking
This can be used to create a network containing the host and a set of virtual machines, without the need for the host's physical network interface. Instead, a virtual network interface (similar to a loopback interface) is created on the host, providing connectivity among virtual machines and the host.
Generic networking
Rarely used modes share the same generic network interface, by allowing the user to select a driver which can be included with VirtualBox or be distributed in an extension pack.
At the moment there are potentially two available sub-modes:
UDP Tunnel
This can be used to interconnect virtual machines running on different hosts directly, easily and transparently, over existing network infrastructure.
VDE (Virtual Distributed Ethernet) networking
This option can be used to connect to a Virtual Distributed Ethernet switch on a Linux or a FreeBSD host. At the moment this needs compiling VirtualBox from sources, as the Oracle packages do not include it.
Out of these, only NAT and Host-only network is important.So, to solve this issue, I modified the predefined Vagrant file with the following code.
jenkins.vm.provider "virtualbox" do |vb|
jenkins.vm.network "private_network",ip:'192.168.56.5',:adapter => 2
jenkins.vm.hostname = 'jenkins.ci'
vb.name = "Jenkins"
end
Here, I have created a private network with static Ip and also, I specified the adapters count to use 2. The Private adapter is Host-only adapter and 1st adapter which is default one is NAT.
I'm playing with ovs-dpdk package https://github.com/01org/dpdk-ovs and one thing I don't clearly understand is how can I have OVS bridge and VMs connected to it get access to outside, ie. to the network. On a regular openvswitch the bridge device created by vswitch is 'visible' from linux and can be configured by regular tools (ifconfig, ethtool etc.), so I could create TAP interface and add it to vswitch bridge interface and assign the bridge interface IP address. However with ovs-dpdk this is not the case: any bridge created with ovs-vsctl is not avaialble in userspace linux, at least I don't see it with ifconfig or "ip link show".
Is there another method OVS-DPDK does this? Hopefully someone can shed some light for this problem. Thanks.
ovs-dpdk when it is using DPDK to access the NIC will take over the nic and not allow regular kernel drivers to do their thing.
This means that you will not see the interface any more from the linux host if you bind the hardware with the dpdk io driver. But you can bridge/tap/mirror inside ovs these raw dpdk interfaces in dpdk-ovs to your vm's or to another interface which is visible to the kernel's regular drivers. You just can't do it on the dpdk owned interfaces.
The whole point of integrating dpdk into ovs is to bypass all the kernel drivers and get packets to/from the vswitch as fast as possible so it can route them natively through to your VM's and other local interfaces as you set in your bridge configuration.
I am running a windows machine and i am running virtualbox on it
I have two VM's for cent os.
I want the two VM's to ping each other but they should have different subnets.
I am not really sure how to do it thus posting this question. I am really not concerned if they can connect to the internet or not, i want them in different subnets.
I tried by using two different internal networks but was not able to ping.
Thanks for you help in advance, really appreciate it
First of all, internal network is an exclusive type of network so you can never reach another machine if they are on different network.
For machines in different subnet to be connected each other, you should have a router between them. So you will need 1 more virtual machine. Just use "Bridget Adapter" mode for the network type at all machine and assign the IP as you like. Just make sure that the router is located in the middle logically. Machine A - Router - Machine B. To create a router machine you can use ubuntu OS. You can see it here :
http://www.yourownlinux.com/2013/07/how-to-configure-ubuntu-as-router.html