I have a solution written in VB with some C# components. The solution uses some libraries from 2 outside sources. I have been working on this project for several months without issue. I cannot identify anything specific that I did to change my system or configuration. I was just working through the code, transitioning from an old set of library calls to the new library calls. The new library calls require complete rewrite so I change sections of the code and test to that point. Visual Studio 2013 debugger as of Friday morning will no longer recognize or show my local variables in this solution. The only things that appear in the Locals window are under Me. The code does work and I have it writing out to a text log file to confirm the values of variables at certain points, but the debugger has gone blind. When I add any of these local variables to Watch the response is " is not declared. It may be inaccessible due to its protection level."
Steps I've taken so far with no permanent success:
looked online and tried the few matches I found with no success
deleted the bin and obj folders and had the solution rebuild with no
success
recreated solution from scratch, copied over base files and rebuilt
solution and project (which worked for a few hours), until I did a
rebuild project and problem appeared again
updated to pack 5 and no success
I have opened my older projects and checked them. The debugger runs just fine and shows the variables. It is obviously something that happens during the rebuild process.
Any assistance would be greatly appreciated.
Thanks
Update:
Let me try to explain a little more clearly the situation.
I have an application I have built and am selling to some customers. Version 1 is installed and running at several locations. It is written in VB and uses some older COM libraries for a particular integration process.
The vendor is retiring the COM libraries. Their new libraries are in C#.
I created a new copy of my entire application (solution) and imported the new C# libraries. I have been going through and replacing the old code with the code for the new calls.I recompiled the solution and everything ran fine in debug.
The objects used with the new calls are completely different and there is limited documentation so I update a section of code and test to that point. Each time I "Save all Files", rebuild the project and test the changes. Everything worked fine for a few days. On Friday morning I started working on more changes and got an odd error. The system was not getting a proper value for a certain variable. When I went to check it in the WATCH window, debugger said it could not evaluate it. I figured something was hung up so I shut everything down and rebooted my machine. When I tried it again later, the same problem.
After several hours of no success I exited VS, renamed the folder to "OLD" and recreated the solution from the older version. Immediately everything was looking fine. I started making the changes and testing. Each time I did a rebuild, everything looked fine until the last change. Here I am again.
The code works fine up to the point I have updated. The only issue is that the debugger windows are not working correctly. If a variable is declared at the Class level outside the Sub, they can be seen. The only variables the debugger is blind to are the local variables within the running Sub.
I looked for anyone else with this issue and only found a few items. I tried the suggestions but no joy. I am left with having to temporarily define the variables outside the sub so I can see them while debugging.
I am on VS 2013 Update 5.
Do I need to move to VS 2015 to get around this?
Thanks again for your time and assistance.
I am assuming that you haven't changed versions of visual studio since the last time a rebuild worked for you.
recreated solution from scratch, copied over base files and rebuilt solution and project (which worked for a few hours), until I did a rebuild project and problem appeared again
Based on this, you create it from scratch and everything works until you do the rebuild right? But you are copying the base files still and you have new library calls since the last time a rebuild didn't mess up the locals window. So one of those is almost assuredly the culprit.
Since the library calls seem to be the thing that changed based on your post start there. If you go back to the old code and do a rebuild does it fix it? Assuming so, put the library calls back one at a time until it breaks.
If going back to the old code doesn't fix it, create from scratch with the old code and copy over the base files and rebuild. If that fixes it, add new library calls one at a time and rebuild after each until it breaks.
If that doesn't fix it either, then you will need to dig deeper on what else might have changed.
You are copying base files so eliminate those as the problem if you can:
Are you able to use placeholders instead of the base files or something that won't necessarily work as a finished product but that will allow you to debug, rebuild, debug again to see if the problem is related to one of them? Check the dates on the base files and ensure that they haven't changed since the last time a rebuild worked.
Something you could do concurrently could be to have have a colleague do a rebuild on their machine and see if the same issue comes up for them. It would (almost) completely eliminate the possibility that it is a configuration / program corruption issue on yours. Alternately, there are some free vb.net compilers online that you can upload files and code to. I'm not sure if that would be practical for you (due to the components of your program and/or sensitivity of the data) or not and haven't ever tried any where there is C# code in there but I wouldn't think that would be an issue.
Related
I've been using Visual Studio 2010 for years now. I have a fairly complex VB.net project that I routinely make changes to. Recently, whenever I'm making changes in debug mode, it throws a System.InvalidProgramException - Common Language Runtime detected an invalid program error which forces me to stop running the program and then restart it again after I've saved my changes.
This issue only happens when I make changes to a Sub or Function which is called by another Sub or Function. For example, if I make a change to a button click event, it's fine, but if I make a change to a function that button calls, it errors.
A change as simple as adding blank lines in my code will cause this to happen. No code change at all...just literally hitting return to add blank lines between code lines.
I installed Visual Studio 2013 thinking it would solve this. It does not. I still get the same errors.
I tried moving my project files to a different HDD, I still get the same errors.
I thought maybe I have corrupt memory, so I ran a full checkdisk and defrag but I still get the same errors.
I've read where this error may happen with very large procedures or projects with lots of variables (although I thought this was fixed in newer .NET versions) so I've cleaned up my code. The largest Module has 30k lines.
The workaround is to stop the project running, save my changes and then restart it...however, that takes time because my program has to reinitialize everything when it runs, so I'd prefer to be able to make changes while debugging.
Also, I have .NET framework 4.5 installed
Update: I loaded up a backup of my code from a month ago and it runs fine...so apparently some recent changes I've made are causing this error. Once I figure out what's changed, I'll update this just for future reference in case anyone else runs into the same issue.
I am working with visual studio 2012, and my problem occurs in a large, old winforms application solution when I try to compile the whole application (dozens of projects).
When I get the latest code from source control (Team Foundation Server) for the first time, and build the solution, it builds just fine the first time. Then, if I make any changes, a later Build/Rebuild, will sometimes (not always) result in lots of projects in the solution throwing the following error for some of its resx files.
Unable to create a manifest resource name for "Contracts\Templates\ContractTemplateDb.resx". Could not find a part of the path 'C:\Windows\system32\Contracts\Templates\ContractTemplateDb.vb'
OR
Invalid Resx file. Could not find a part of the path 'C:\Windows\system32\NeptuneForms\HelpForm.resx'.
The problem is that there is no reason it should be looking in C:\Windows\system32 for these files, as they exist fine (and did during the last build) in the local directory of the project! The random directory is not always C:\Windows\system32, sometimes it is a random directory of another project, or even in another branch.
This happens sporadically to some of our developers, frequently to others, and almost always to me, and it seems unrelated to the code we are writing, because when it happened, I rolled back all the changes we had made since it started happening, and it still happened.
There are two things I've tried, that had no success.
Recreate the entire solution, and remove and readd all resource files as though they never existed before.
Install all windows updates and get the latest updates to Visual Studio 2012
Nothing has helped, and I am at a loss. My next step is to upgrade to 2013 and hope for the best, but I'm afraid thats not going to help either.
Does anyone have any similar experience, or any ideas of other things to try? I'm pulling my hair out over this one...
On both Xcode 4.4 and 4.4.1 I'm experiencing the same issue in that with the specific project I'm working on, I don't seem to be able to rename any classes or variables from the Refactor menu option.
Each time I try and do a rename, I type in the new name for the class/variable and click Preview at which point the bottom left begins a spinner with Finding files.... However, I then get a message saying:
The selection is not a type that can be renamed.
Make a different selection and try again.
I'm pretty sure that this is not an issue with my specific install of Xcode, because I can refactor other projects fine, it's just that I can't seem to be able to refactor this specific project.
Anyone with any ideas? I don't have any particularly exotic configuration for this project, it just seems to be a random affliction. I've deleted all of my derived data and re-indexed, but that doesn't seem to help.
Since it works OK in other projects, I'm thinking one thing I could try to do is re-generate the actual project file(s) itself. I don't know if there is a way to do this automatically?
If they're in dropbox get them out of there. It mangles project files. I've had it happen numerous times and at times it makes refactoring > renaming not work.
I have managed to solve this issue after trying many different things (tweaking project settings, pch, etc.) and it turns out there was a very simple (and totally counter-intuitive) method of fixing this issue.
All I have done is:-
Copy my entire project folder (so from Project to Project Copy).
Move Project (the original folder) to trash.
Rename Project Copy to Project.
Mysteriously, everything now works fine.
I really cannot figure out why this works. As mentioned previously, I had already deleted all derived data, etc. so I don't know why this should make things spontaneously work, but it does.
Would appreciate anyone who is able to shed some light on this as it does expose just how fiddly Xcode can be, and any understanding of what goes on under the hood is always beneficial.
Sounds like a buggered index.
I usually use the nuke from space option to delete everything in the derived data directory.
Unless you have changed it (I change mine to /tmp/bbum-derived), it'll be at:
~/Library/Developer/Xcode/DerivedData
Thus, I'll quit Xcode and do:
rm -rf ~/Library/Developer/Xcode/DerivedData
Yes, it is a bit brute force, but it works. You can likely force Xcode to rebuild the index from the UI, but I never bother. Of course, I'm also installing quite a few "odd" builds of this and that as a part of my day job...
(that is an rm -rf. It means "nuke everything and don't ask" in unix parlance. It is dangerous. Do not mistype that command.)
It seems you have an active selection somewhere in the gui, perhaps some of your files or classes are selected ? Try unselect in every sub window and retry refactoring.
I'm a bit late to this thread, but I ran into the same problem today and I was able to get it to finally refactor correctly, thought I share it.
So in large part I did what bbum said, I closed xCode, nuked the Derived data for the project the class files were in and re opened the project. Doing just that, it didn't work; the key, I found (at least for me), is that I had to do a clean (command shift k) after xCode restarts. After that I was able to rename the class files again :)
Also as a side note, my project is divided into the main project, and a static library. When I had to rename classes in the static library, I had to quit the main project and do what I described in the static library itself. Somehow I got the same error described in the question when I tried to do the refactor/rename from the main project.
Good luck!
This thread was very helpful for me in determining the problem.
It turned out that I had to Repair Disk with Disk Utility. I had visited a site earlier that had hijacked Safari and was telling me to call a number for emergency repairs, an obvious scam.
I followed the Disk Utility instructions to repair disk (including restarting with CMD-R pressed). Another clue was that I tried to commit to git and Xcode said No Way, Jose.
Afterwards I was able to refactor and commit changes as if nothing ever happened. I hope this helps someone else as a possible cause to investigate.
I'm seeing a strange build bug a lot. Sometimes after typing some code we receive the following build error.
Class 'clsX' must implement 'Event PropertyChanged(sender As Object, e As PropertyChangedEventArgs)' for interface System.ComponentModel.INotifyPropertyChanged'.
And
'PropertyChanged' cannot implement 'PropertyChanged' because there is no matching event on interface 'System.ComponentModel.INotifyPropertyChanged'.
Those error should never go together! Usually we can just ignore the exception and build the solution but often enough this bug stops our build. (this happens a lot using Edit and Continue which is annoying)
We're using Vb.net and c# mixed in one big solution.
Removing the PropertyChanged event and retyping the same code! sometimes fixes this.
Question:
Has anyone else seen this problem and has some suggestions how to prevent his?
We're using a code generator that causes this error to surface but just editing some files manually triggers this exception too. This error occur's on multiple machines using various setups.
Someone had the same exact issue discussed here. It sounds like there is an issue with this build picking up an old version of a binary. I would try the following in order:
Verify all assembly references use project references where possible within the Visual Studio solution.
Disable build parallelization in case there is some weird file locking issue with concurrent project builds. Go to Tools -> Options, Projects and Solutions -> Build and Run, then set "maximum number of parrellel project builds" to 1. Not the best solution but it may help narrow down the problem.
Disable the Hosting Process in case it's locking some file causing an assembly to not get rebuilt correctly. For C# project go to Project Properties, Debug tab, and uncheck "Enable the Visual Studio hosting process". For VB.NET project you'll need to Unload Project, Edit the project file, and add <UseVSHostingProcess>false</UseVSHostingProcess> to the PropertyGroup of each configuration. Again, not the best solution but you probably won't notice a difference.
Lastly, try doing a Clean + Build to try and resolve the issue when it occurs (I know this is not a fix but it's easy enough to do), also Rebuild may be slightly different than Clean + Build so try the latter if the former doesn't work.
As I can not comment due to lack of appropriate points.
But I would like to share one of my experience:
In an aspx.cs page I was working, used to compile fine and some time gave mysterious error of a variable not defined or function not defined or sometime variable or the function defined two times. I changed possibly each and every variable and function name but there seemed no effect , but after entering a simple space or a new line at any place in the file used to solve the compile error. At one time I tried to save the file (in a different encoding as i am used to experiments) and found that the file was not saving in the correct encoding (i.e. the ansi encoding because the file had a unicode character ), I removed the unicode character and that compile error didn't bothered me again.
This unicode character problem could be (not a hard and fast rule) there so you could check it.
Nuke & restore using source control (TFS instructions here):
Make sure you have everything checked in
Exit Visual Studio
Rename the project directory to .Bak (effectively deleting it)
Reopen Visual Studio and in source control:
Get Specific Version
check 'Overwrite... not checked out' and 'Overwrite ... even if local version matches'
Re-open project
Another problem: Make sure some source files are not newer than the current date (or your date is set back). Often this happens in apps where you are doing logic that requires certain things to happen differently on certain dates. You change your clock to test it, make a revision to the source with the date advanced, set the date back, and viola, rebuild does not rebuild that file.
You say 'typing it in again' - can you try just saving? After 40 years since MULTIX the .net build still decides what has changed by checking the file timestamp.
good luck!
When you get the error, is it always on the VB calling C# side, or vice-versa, or does it work both ways?
If the answer is either of the first two situations, try building the "callee" project within the solution before building the "caller" project to see if it stops the situation.
Also, just in case it may jog something for you to think about, does this error crop up when you change a VB file or a C# file, or is there no correllation?
Oh, and sorry this looks like an answer instead of a comment, I cannot post comments yet (need 50 rep).
I have a VS 2008 VB.NET Solution, which is quite large. Every once in a while, if I take latest code from source control, I get hundreds of errors. These aren't real errors. They are all about classes not implementing functions/events from interfaces (which they DO implement).
"Class [class name] must implement [event or function name] for interface [interface name]"
I usually end up spending couple of hours doing a combination of: building/rebuilding the solution project by project, cleaning the solution, deleting everything locally, taking latest... etc. At some point, everything just magically builds. Does anyone have any idea what is causing this? Other people on my team experience this as well. I do not see any circular references.
Yes, I've been there.
The root of the problem is that some projects are trying to build and they are dependent on the dll's that other projects generate.
You can solve this by modifying the build order of your projects.
Once you do this, everything should work fine on the first build attempt after check out.
I've seen it as well.
I think it's related to some of the metadata/files Visual studio keeps around..my running theory is that VS isn't refreshing it's internal stuff when you do the latest pull from source control. Thus it tries to do a build, it thinks some files haven't been "updated" (thus it has an old intermediate object file lying around it uses instead) gets confused, and fails.
Generally doing a combination of Build->Clean Solution, Build->Build Solution solves it most of the time. I have, twice, had to blow away the entire build directory and pull a fresh copy from source control (Clearcase) and do a fresh build.
Edit: I have Clearcase integrated with VS2008, and do my checkouts/checkins/version history from within VS2008. Not sure if using the standalone windows tool would solve this issue, and haven't the time to test (not to mention being unable to reproduce the error consistantly)
Edit2: When i say twice, i mean twice in the last 12 months or so.