I installed phpmyadmin using homebrew
brew install phpmyadmin
The output came back as follows:
Note that this formula will NOT install mysql. It is not
required since you might want to get connected to a remote
database server.
Webserver configuration example (add this at the end of
your /etc/apache2/httpd.conf for instance) :
Alias /phpmyadmin /usr/local/share/phpmyadmin
<Directory /usr/local/share/phpmyadmin/>
Options Indexes FollowSymLinks MultiViews
AllowOverride All
<IfModule mod_authz_core.c>
Require all granted
</IfModule>
<IfModule !mod_authz_core.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
Then, open http://localhost/phpmyadmin
More documentation : file:///usr/local/Cellar/phpmyadmin/4.3.11.1/share/phpmyadmin/doc/
Configuration has been copied to /usr/local/etc/phpmyadmin.config.inc.php
Don't forget to:
- change your secret blowfish
- uncomment the configuration lines (pma, pmapass ...)
==> Summary
🍺 /usr/local/Cellar/phpmyadmin/4.3.11.1: 1,898 files, 55.2M, built in 2 seconds
I updated httpd.conf with that block of details. I also updated my blowfish and uncommented the configuration lines as it states.
When I go to localhost/phpmyadmin i get a 404 error.
Any ideas where I would find the interface so I can more easily build/update my database(s).
I experienced this problem, too.
In order to use phpMyAdmin in your apache, you have to make symbolic link in /usr/local/var/www/htdocs with this command. (If you didn't changed your DocumentRoot)
cd /usr/local/var/www/htdocs
ln -s /usr/local/Cellar/phpmyadmin/4.3.11.1/share/phpmyadmin ./phpmyadmin
Related
I've checked out the best answer to this question and can't get it to work. Using Ubuntu 14.04 and Apache 2.4.7 I am trying to load
localhost/locals/hcl/index.html in order to verify that it works correctly through a server.
Where
/var/www/html/locals -> /media/userid/WWW/www/upload
and /media/userid/WWW/www/upload/hcl/index.html exists.
I have changed /etc/apache2/apache2.conf to (following is copied from webmin output for the default server):
<Directory /var/www/html>
Options -Indexes +FollowSymLinks
AllowOverride None
Require all granted
</Directory>
as recommended in
Apache won't follow symlinks (403 Forbidden)
and all directories and files in the path have rwx set and /media/userid/WWW/www/upload has owner set to www-data, which used to be important.
My /var/www/html directory contains another symbolic link:
phpsysinfo -> /usr/share/phpsysinfo
that does work, and
file:///media/userid/WWW/www/upload/hcl/index.html
works as expected in Firefox. Obviously, I have omitted some crucial step, but I cannot see what it is: can anyone advise ?
I have an Ubuntu 14.04 server with LAMP stack already installed.
I have a directory /home/alex/checkhtml which included some testing php and html.
What I want is when I access http://localhost/checkhtml , the content of /home/alex/checkhtml will be showed (Actually /home/alex/checkhtml/index.html)
Here is what I did:
Go to: /etc/apache2/conf-available and create apache-php.conf file
Add these lines to apache-php.conf:
Alias ^/php "/home/alex/php"
<Directory /home/alex/php>
Order allow,deny
Require all granted
</Directory>
Go to /home/alex/checkhtml and create .htaccess and add these lines:
<FilesMatch ".">
Allow from all
</FilesMatch>
Enable apache-php.conf and restart apache
However, when I tried: http://localhost/checkhtml . The error appear:
The requested URL /checkhtml was not found on this server.
Does anyone know what I did wrong here ?
Thank you and best regards.
Alex
You should use Alias driective for exact URL matching. If you want to use Regex matching then use AliasMatch directive:
AliasMatch "^/checkhtml" "/home/alex/checkhtml"
<Directory /home/alex/checkhtml>
Require all granted
</Directory>
I have CentOS 6.1 server and I installed apache 2.2.15 on it.
Now When I try to access it from another pc (windows 7) from IE (http:/// (=centos ip)) I get the "You don't have permission to access / on this server." error. I even created phpinfo.php file with content of "" on "var/www/html" and when I try to access it by using "http://*/phpinfo.php" in IE, I get not found error. What should I do?
my httpd.conf for directiry is like this:
<Directory "/var/www/html">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Edit httpd.conf file, which is in /etc/httpd/conf/httpd.conf. Add the below code.
<Directory "/">
#Options FollowSymLinks
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride None
Allow from all
</Directory>
<Directory "/home/">
#Options FollowSymLinks
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride None
Allow from all
</Directory>
After the line no. 555 (in my case) . Check for the file permissions and restart the server.
service httpd restart
Now, it will work . Still you are facing the same problem, disable the seLinux in /etc/selinux/config change SELINUX=disabled and restart the server as mentioned above and try it.
Hope this helps
Set SELinux in Permissive Mode using the command below:
setenforce 0;
Check file permissions of the /var/www/html and the ALLOW directive in your apache conf
Make sure all files are readable by the webserver and the allow directive is like
<Directory "/var/www/html">
Order allow,deny
Allow from all
</Directory>
if you can see files then consider sorting the directive to be more restrictive
Fist check that apache is running. service httpd restart for restarting
CentOS 6 comes with SELinux activated, so, either change the policy or disabled it by editing /etc/sysconfig/selinux setting SELINUX=disabled. Then restart
Then check locally (from centos) if apache is working.
Try to use the following:
chmod +rx /home/*
If you set SELinux in permissive mode (command setenforce 0) and it works (worked for me) then you can run restorecon (sudo restorecon -Rv /var/www/html/) which set the correct context to the files in Apache directory permanently because setenforce is temporal. The context for Apache is httpd_sys_content_t and you can verify it running the command ls -Z /var/www/html/ that outputs something like:
-rwxr-xr-x. root root system_u:object_r:httpd_sys_content_t:s0 index.html
In case the file does not have the right context, appear something like this:
drwxr-xr-x. root root unconfined_u:object_r:user_home_t:s0 tests
Hope it can help you.
PD: excuse me my English
Create index.html or index.php file in root directory (in your case - /var/www/html, as #jabaldonedo mentioned)
Right click your www folder and click on properties. Navigate to permissions and change all to read and write then click on "Apply permission to enclosed files" and your are done!!
Maybe its too late but this will definitely help some other person
Check the apache User and Group setting in the httpd.conf. It should default to apache on AMI/RedHat or www-data on Debian.
grep '^Group\|^User' /etc/httpd/conf/httpd.conf
Then add the apache user to the group setting of your site's root directory.
sudo usermod -a -G <your-site-root-dir-group> apache
try to edit httpd.conf
<Directory "/usr/local/www/apache24/cgi-bin">
Options Indexes FollowSymLinks Includes ExecCGI
Require all granted
</Directory>
For CentOS 8 your /etc/httpd/conf.d/awstats.conf file needs to look like this and you need to stick in your IP address and restart your httpd service unless you want to whole world to have access to it!
#
# Directives to add to your Apache conf file to allow use of AWStats as a CGI.
# Note that path "/usr/share/awstats/" must reflect your AWStats install path.
#
Alias /awstatsclasses "/usr/share/awstats/wwwroot/classes/"
Alias /awstatscss "/usr/share/awstats/wwwroot/css/"
Alias /awstatsicons "/usr/share/awstats/wwwroot/icon/"
ScriptAlias /awstats/ "/usr/share/awstats/wwwroot/cgi-bin/"
#
# This is to permit URL access to scripts/files in AWStats directory.
#
<Directory "/usr/share/awstats/wwwroot">
Options None
AllowOverride None
<IfModule mod_authz_core.c>
# Apache 2.4
<RequireAny>
Require <Your IP Address here>
</RequireAny>
</IfModule>
<IfModule !mod_authz_core.c>
# Apache 2.2
Allow from <Your IP address here>
Allow from ::1
</IfModule>
</Directory>
# Additional Perl modules
<IfModule mod_env.c>
SetEnv PERL5LIB /usr/share/awstats/lib:/usr/share/awstats/plugins
</IfModule>
Remember that if you IP address changes you need to update the file and restart the httpd server. BTW you can see your ip address as it looks from the outside by simply googling "my ip"
Set required all granted in /etc/httpd/conf/httpd.conf
I have a server from AWS EC2 service running on Linux ubuntu and I have installed apache, php, and mysql.
I have added a .htaccess file in my document root /var/www/html.
I entered this code in it:
ErrorDocument 404 /var/www/html/404.php and it is still not showing up.
I kept entered this command multiple times: sudo service httpd restart to restart the server but no changes displayed...
How can I fix this... Did I do something wrong?
First, note that restarting httpd is not necessary for .htaccess files. .htaccess files are specifically for people who don't have root - ie, don't have access to the httpd server config file, and can't restart the server. As you're able to restart the server, you don't need .htaccess files and can use the main server config directly.
Secondly, if .htaccess files are being ignored, you need to check to see that AllowOverride is set correctly. See http://httpd.apache.org/docs/2.4/mod/core.html#allowoverride for details. You need to also ensure that it is set in the correct scope - ie, in the right block in your configuration. Be sure you're NOT editing the one in the block, for example.
Third, if you want to ensure that a .htaccess file is in fact being read, put garbage in it.
An invalid line, such as "INVALID LINE HERE", in your .htaccess file, will result in a 500 Server Error when you point your browser at the directory containing that file. If it doesn't, then you don't have AllowOverride configured correctly.
Enable Apache mod_rewrite module
a2enmod rewrite
add the following code to /etc/apache2/sites-available/default
AllowOverride All
Restart apache
/etc/init.d/apache2 restart
If you have tried all of the above, which are all valid and good answers, and your htaccess file is not working or being read change the directive in the apache2.conf file. Under Ubuntu the path is /etc/apache2/apache2.conf
Change the <Directory> directive pointing to your public web pages, where the htaccess file resides. Change from AllowOverride None to AllowOverride All
<Directory /var/www/>
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
I had the same problem and found the answer and explanation on the Ubuntu Ask! forum https://askubuntu.com/questions/421233/enabling-htaccess-file-to-rewrite-path-not-working
For Ubuntu,
First, run this command :-
sudo a2enmod rewrite
Then, edit the file /etc/apache2/sites-available/000-default.conf using nano or vim using this command :-
sudo nano /etc/apache2/sites-available/000-default.conf
Then in the 000-default.conf file, add this after the line DocumentRoot /var/www/html. If your root html directory is something other, then write that :-
<Directory "/var/www/html">
AllowOverride All
</Directory>
After doing everything, restart apache using the command sudo service apache2 restart
Most probably, AllowOverride is set to None. in Directory section of apache2.conf located in /etc/apache2 folder
Try setting it to AllowOverride All
Just follow 3 steps
Enable mode_rewrite using following command
sudo a2enmod rewrite
Password will be asked. So enter your password
Update your 000-default.conf or default.conf file located at /etc/apache2/sites-available/ directory. you can not edit it directly. so use following command to open
sudo gedit /etc/apache2/sites-available/000-default.conf
Or
sudo gedit /etc/apache2/sites-available/default.conf
you will get
DocumentRoot /var/www/html
OR
DocumentRoot /var/www
line. Add following code after it.
<Directory /var/www/html/>
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
Make user the directory tag path is same as shown in your file.
Restart your apache server using following command
sudo service apache2 restart
In my experience, /var/www/ directory directive prevents subfolder virtualhost directives. So if you had tried all suggestions and still not working and you are using virtualhosts try this ;
1 - Be sure that you have
AllowOverride All directive in
/etc/apache2/sites-available/example.com.conf
2 - Check /var/www/ Directory directives in /etc/apache2/apache2.conf (possibly at line 164), which looks like ;
<Directory /var/www/>
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
If there is an AllowOverride None directive change it to
AllowOverride All or just escape line
By default, Apache prohibits using an .htaccess file to apply rewrite rules, so
Step 1 — Enabling mod_rewrite (if not Enabled)
First, we need to activate mod_rewrite. It's available but not enabled with a clean Apache 2 installation.
$ sudo a2enmod rewrite
This will activate the module or alert you that the module is already enabled. To put these changes into effect, restart Apache.
$ sudo systemctl restart apache2
mod_rewrite is now fully enabled. In the next step we will set up an .htaccess file that we'll use to define rewrite rules for redirects.
Step 2 — Setting Up .htaccess
Open the default Apache configuration file using nano or your favorite text editor.
$ sudo nano /etc/apache2/sites-available/000-default.conf
Inside that file, you will find a block starting on the first line. Inside of that block, add the following new block so your configuration file looks like the following. Make sure that all blocks are properly indented.
/etc/apache2/sites-available/000-default.conf
<VirtualHost *:80>
<Directory /var/www/html>
Options Indexes FollowSymLinks MultiViews
AllowOverride All
Require all granted
</Directory>
. . .
</VirtualHost>
Save and close the file. To put these changes into effect, restart Apache.
$ sudo systemctl restart apache2
Done. Your .htacess should work.
This link may actually help somebody https://www.digitalocean.com/community/tutorials/how-to-rewrite-urls-with-mod_rewrite-for-apache-on-ubuntu-16-04
I cleared this use. By using this site click Here , follow the steps, the same steps follows upto the ubuntu version 18.04
Go to /etc/apache2/apache2.conf
You have to edit that file (you should have root permission). Change directory text as bellow:
<Directory /var/www/>
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
Now you have to restart apache.
service apache2 restart
In WampServer Open WampServer Tray icon ----> Apache ---> Apache Modules --->rewrite_module
For completeness, if "AllowOverride All" doesn't fix your problem, you could debug this problem using:
Run apachectl -S and see if you have more than one namevhost. It might be that httpd is looking for .htaccess of another DocumentRoot.
Use strace -f apachectl -X and look for where it's loading (or not loading) .htaccess from.
i have a lot of sites on my virtual machine,
and i solved it only by changing config of the site in which i needed .htaccess
what i did:
sudo a2enmod rewrite
next i changed only config for particular site, not for every site "example.com"
sudo nano /etc/apache2/sites-enable/example.com.conf
inside of it i added
<Directory /var/www/example.com>
AllowOverride All
</Directory>
service apache2 restart
so it only applies for 1 site, because when i tried to apply changes to entire server it crashed, don't know why, but this solved my problem
I am trying to setup an alias to point to some directory on my filesystem not in DocumentRoot. Now I get a 403 Forbidden response. These are the steps taken:
1. edit http.conf, adding:
Alias /example "/Users/user/Documents/example"
then...
<Directory "/Users/user/Documents/example">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all</Directory>
2. setting permissions with chmod in terminal:
chmod 755 /Users/user/Documents/example
Now it should work? instead I get the access forbidden. This is the output from error_log:
[Sun Jul 24 06:57:57 2011] [error] [client xx.xx.xx.xx] (13)Permission denied: access to /example denied
I was having this issue on OS X too. It turned out gliptak was right, but I've some more detail to add.
We're both attempting to configure a virtual directory for a folder under a user's home folder; I think this is why we're having the problem. In my case, I had the following setup:
Home folder is /Users/calrion.
Virtual directory folder is /Users/calrion/Path/to/www.
There's a symlink /Users/calrion/Path pointing to /Volumes/Other/Users/calrion/Path.
The problem was the user and group _www (which Apache runs as on OS X) lacked execute access to /Users/calrion and /Volumes/Other/Users/calrion.
Running chmod o+x /Users/calrion and chmod o+x /Volumes/Other/Users/calrion resolved the issue (on OS X 10.7.4).
The rule here is that Apache requires execute access to all folders in the path in order to serve files. Without this, you'll get a HTTP 403 (forbidden).
The last straw ;) Required local in the Directory Entry...
like
<Directory "/Users/user/Documents/example">
Options Indexes FollowSymLinks MultiViews
AllowOverride All
Require local
Order allow,deny
Allow from all
</Directory>
if everything else doesn't work (correct Alias, Directory Entry in httpd.conf and correct mod/usr/grp).
keep in mind: if you put your site in user-space the apache user (running httpd) needs access to your home!
Check permission on /Users/user/Documents/, /Users/user/ (higher level permissions are enforced first ...)
/bin/su into the user running Apache (like www, www-data) and cat a file in the /Users/user/Documents/example directory. That might point you to permission problems with your setup.
These are all very good answers.
None of them worked for me.
I have an alias specified in OSX server pointing to a user directory. I spent a long while chmodding and messing with _www user, adding executable permissions recursively, uninstalling macports and all sorts of stuff trying to get this to work. I tried 777. Nope. No idea why it wasn't working.
Eventually, I just checked the "shared folder" checkbox in the Finder for that folder, and it worked, on the specified domain, with php active, the way I wanted it to. :/ ...so that was easy.
I was just having this exact same issue. What I found was SE_Linux was enabled, and the security context of the files in my Aliased directory was incorrect, missing httpd_sys_content_t.
You can view the security context with ls -Z. If your files/folders don't have httpd_sys_content_t then apache won't server them up! You can add the proper context with something like chcon -R --type=httpd_sys_content_t /new_html_directory. This will change the context of the files currently in the directory, but not any files that are added afterwards (for that you'll need to work with semanage). Your other option is to just leave the files under /var/www.
Here's what fixed it for me:
in /etc/apache2/httpd.conf
<Directory />
Options FollowSymLinks
AllowOverride None
# REMOVE THESE LINES
#Order deny,allow
#Deny from all
# ADD THIS LINE
Require all denied
</Directory>
This change implements changes made in the apache update from 2.2 to 2.4. The OSX Yosemite update brought the apache update with it (PSA: if you're planning on upgrading to Yosemite, budget yourself a week to fix everything it breaks).
The weird thing is that I already got apache 2.4 working, and suddenly it breaks again....
PSA: if you're planning on upgrading to Yosemite, budget yourself a week to fix everything it breaks
After lots of time waste i fixed the issue and i wanted to share to save your time.
All the gentelmen above and on other posts has some correct parts in their answers but below is the sum
In your "/etc/apache2/httpd.conf" file:
1- change your document root
Original: DocumentRoot "/Library/WebServer/Documents"
Change to: DocumentRoot "/Users/yourname/www"
2- change
Original:
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
Change to:
<Directory /Users/yourname/www>
Options FollowSymLinks Includes ExecCGI
AllowOverride None
Order deny,allow
Deny from all
</Directory>
3- Change:
Original:
<Directory "/Library/WebServer/Documents">
Change to:
<Directory "/Users/yourname/www">
4- Finally, you might not need this step if you are the supper user, this is to set the right permition on your new root folder
chmod 755 /Users/yourname/www
Hope this will help
It certainly does look right, do a sanity check.
you restarted apache
check group and user ownership
I think the quotes can be removed
there is something in /Users/user/Documents/example ?
try 777
-sean
SELinux was the culprit for me. If you're having this issue on a linux box and your alias and file permissions are correct than try doing a "setenforce 0" to put SELinux into permissive mode. That did the trick for me.
I had to revert my apache config file and then set up the server again. found this useful:
https://apple.stackexchange.com/questions/41143/how-to-revert-default-mac-apache-install-to-original
Quick Solution:
Use these commands as root on Linux:
find /var/www -type d -exec chmod 755 {} \;
find /var/www -type f -exec chmod 644 {} \;